Horse drawn single farrow mouldboard plough - wooden handles.'Tom Thumb' on iron where wooden shaft connects.rural industry, agriculture

1905-1933.The bandage winding machine wound calico bandages for patient use. A sheet of calico was torn into strips of differing widths and a length of around 8 feet or 240 cm. The bandage was wound around the handle shaft, by hand initially, to get purchase, then the handle was turned until the bandage was tightly wound. Bandages were reused after being washed, dried and rewound on the machine.bandages, bandage winding machine, nursing practice, Alfred HospitalAn open wooden frame with six horizontal struts. At the top of the frame is a metal shaft which winds and holds the calico bandage. . It sits on a solid wooden base, 4 curved corners. 2 solid wooden end plates.Marked from Ward 1 on outside of end plate in black inkbandages, bandage winding machine, nursing practice, alfred hospital

A plan showing the underground sections of the Washington Shaft, Smith's Freehold Shaft and the New Kohinoor Shaft.plans, mining, cgt, washington shaft, smith's freehold shaft, new kohinoor shaft, koh-i-nor

Students from Mt Beauty Secondary College produced this set of 3 DVDs re the development of AGL's Bogong Power Development 2007-2009. This was an addition to the Kiewa Hydro Electric Scheme built by the SECV in the 1950s. The information covers many aspects of the Development which is of interest as well as being educational for the students. The request re the SECV Adit Shaft was to assist with the information board beside the shaft on the Gorges Walk on the West Kiewa River. DVDs were a digital means of passing on information to an audience and enabled multiple copies to be made. The Kiewa Hydro Electric Scheme is in the Kiewa Valley producing clean energy for Victoria. The Bogong Power Development increased the production of electricity in line with more clean energy and gave locals employment and students an insight into its construction and issues. The technical aspect of using DVDs to present this knowledge was also part of the education for the local students. x3 DVDs with hard clear plastic box cover. The cover has a photo on the front with the title typed above it and production details below along with the AGL logo and its Mt Beauty logo.On the back the details (title and content) for each of the 3 DVDs is given. DVD Stories: 1, 2, 4, 7 & 8 and DVD "AGL Photos West Kiewa - In response to letter re photos of Adit Shaft. July 2013"bogong power development project, mt beauty secondary college 2007-2009, agl

Len Lukey was a Victorian Racing Car Driver in the 1950s & 1960s and established his Car Exhaust Muffler business in his backyard in Highett c 1970. In 1964 he purchased the site and then developed and operated the Phillip Island Car Racing Track until his death 1978. He designed the Lukey Racing Car Museum and Gardens at that site. The 1959 Australian Drivers Championship was a CAMS sanctioned motor racing title for drivers of Formula Libre cars. The championship winner was awarded the 1959 CAMS Gold Star. The series was won by Victorian racer Len Lukey driving his Cooper T45 Climax and in the opening round of the series his own much modified Cooper T23 which was known as the Lukey-Bristol. Lukey was one of only a few drivers who attempted to complete the gruelling twelve race schedule, the longest in ADC history. Lukey finished just two points ahead of his season long rival, Alec Mildren from the ACT [1] (Cooper-Climax). Stan Jones, the father of F1 World Champion Alan Jones, was third in the championship, using four different cars over the course of the series. Race victories were shared around with Mildren taking three wins. Lukey, Jones and Bill Patterson each took two wins, with single victories going to Jack Brabham, Bib Stillwell and New Zealand Maserati 250F racer Ross Jensen. Jack Brabham later became F1 World Champion 3 times. A steel bottle opener with engraved advertising for Lukey Mufflers Pty Ltd HighettAlong Shaft : LUKEY MUFFLERS / HIGHETT VICTORIA / XL 3641car part manufacturers, lukey mufflers pty ltd, highett, moorabbin, bentleigh, cheltenham, early settlers, bottle openers, steel manufacturer, brabham jack, formula one grand prix champions, jones alan, phillip island car racing track.

Black and white photograph. Female students collecting hay for the Silo. One student is taking a photograph, one is sitting on the cart holding the reins of Donny the draughthorse. Others are forking the hay into the cart.On reverse, "1944 Collecting the Hay for the Silo - Old Donny in the shafts."hay, silo, donny, helen dudley, 1991, centenary, students working outside, draughthorse

This cart came from Sederlan's Bakery - Newmerella and Orbost. It had been used outside the premises as advertising. The original chassis had been added to extensively with shafts, wheels and tyres added. This axle appears to have part of the cart - either a baker's or butcher's cart. The original cart may have been a butcher's or baker's cart.A wooden two-wheeled cart painted cream. It has a wooden ply top and is fully enclosed. The chassis seems to be original with the rest having been re-constructed from non-original materials. The shafts are the wrong size and shape, It has had car tyres, wheels and axle attached.advertising cart sederlan's-bakery

This object is Magill's adaptation of the battery handle in the form of an "inserting tracheoscope". Introduced in 1935 for one-lung anaesthesia, it is combined with an endotracheal tube, the central part of which is a latex-covered wire spiral, and a bronchus blocker. In use, the tube was fixed to the holder and the whole apparatus inserted as a ttracheoscope. At the carina, the blocker was inserted into the bronchus and the balloon (now perished in this example) inflated. The holder was then removed leaving the endotracheal tube and blocker in place. The bronchus blocker consists of gum elastic on woven silver wire and has a suction channel opening at the tip. in other stages of development of Magill's laryngoscope, the original pattern blade was adapted to the battery handle, at first in a fixed arrangement and then with interchangeable blades of different sizes. Later still, the folding handle was introduced.This U-shaped chrome plated laryngoscope comprises an endotracheal tube used to facilitate access to the patient's airway, wire spring attachments and a cylindrical handle with provisions for battery to illuminate inside the body during use.Embossed on the central shaft of the item is 'A Charles King, Ltd', the maker's details.laryngoscope, anaesthesia, macgills, chrome, battery, a charles kind ltd

The University's mace was carried in procession for the first time during the Graduation ceremonies in May 1996. The mace was presented to the University by former Chief Commissioner of the Ballarat City Council, Vern Robson, at a ceremony on 02 February, following a national competition for its design, sponsored by the Council. (The Flag, Issue 2, July 1996) Nineteen artists responded to the competition which called for a design that would embody a distinctive Australian image reflecting the heritage of the city and in relationship with gold, an Aboriginal element and the history of the University. The winning entry, dominated by a poppet head, was submitted by Central Victorian artist/sculptor Trefor Prest, a sessional lecturer in sculpture at the University.(The Flag, Issue 2, July 1996) The Herald Sun of 03 February 1996 reported 'the new mace shows importance elements of Ballarat's heritage as well as the university's focus on the future. The artist emphasises the egalitarian nature of Australia as embodied in Ballarat's famous slice of history - the Eureka uprising. ... The mace has a poppet head at the top of the shaft - an unusual element for a mace - but it represents Ballarat's mining history and the University's evolution from the Ballarat School of Mines. An opening egg at the top stands for the nurturing of development and learning. The mace's straight shaft is depicted as the tree of knowledge and, incorporating a bark canoe scar, Ballarat's Aboriginal heritage. At the end of the shaft is a surveying device, which represents precision and accuracy ads embodied in the university's academic pursuits.' Bob Morrell of the University organised the national competition to design the mace and said 'It is in keeping with the university's logo, 'proudly flying the flag', which incorporates the Southern Cross.' This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007. Trefor Prest lectured in Sculpture at the University of Ballarat from 1995-1996.The mace symbolises the office of the Chancellor. The design of the mace is the outcome of a national competition and represents the cultural diversity of Australia. The poppet head on the top of the mace refers to gold mining, which underpinned the development of Ballarat. The protruding spikes recall the Eureka Stockade. The 'egg' shape enfolds and nurtures the development of knowledge and learning. The shaft with the three 'branches' represents the Tree of Knowledge, and includes a bark canoe scar which recognises the integration of black and white Australian traditions. The lower part of the shaft culminates in a device suggestive of scientific or surveying and measuring technology. This represents precision and accuracy embodied in the academic pursuits of Federation University Australia.art, artwork, trefor prest, prest, mace, federation university, university, eureka stockade, aborigines, scarred tree, mining, university mace, ballarat

This flag was used for the centenary of the Eureka Stockade. Blue flag with white cross and starsWritten in biro near shaft "Reject - Ballarat made and printed by Geoff Zilliescloth, timber, eureka flag, eureka centenary, geoff zilles

Gold was discovered on Victoria Hill in 1854 and by 1861, 1,200,000 ounces of gold had been extracted from the site. The first claim was bought for 80 pounds by Prussian immigrant Christopher Ballerstedt and his son Theodore. Christopher Ballerstedt was nicknamed the "Father of the Hill" and was the first to prove that gold reefs extended below the surface. His 200-foot plus mine shafts yielded quartz rich with gold, inspired other miners, and were instrumental in Bendigo becoming the world's deepest and richest goldfield. The site still features relics of nineteenth century mining including quartz crushing machinery and the foundations of George Lansell’s 180 mine. These features are characteristic of Bendigo’s mining history and represent two prominent nineteenth century miners, Christopher Ballerstedt and George Lansell, who held important roles in the development of Bendigo. Victoria Hill Quartz Gold Mines are registered as a site of significance. The site is of historical, archaeological and scientific importance to Victoria. The mines represent the symbolic heart of Bendigo’s gold mining history and the importance that mining played in wealth creation and the development of Victoria. The diggings reserve is accessed from the rear of Albert Richardson Reserve located at 40-56 Marong Road, Ironbark. The site has steep and unformed paths and is closed to the public at dusk. It is important to stay to the paths to avoid the diggings. Interpretive signs help visitors to appreciate the importance of the site and the remaining relics of Bendigo’s mining history.Victoria Hill Ironbark, Bendigo. Photos of the poppet head, sand heap, tailings, shafts and tunnels. Before development into a tourist attraction.history, bendigo, victoria hill, ironbark, diggings

Round flat metal disc with upright corkscrew shaft attached. Handle thin horizontal shaft at base.rural industry, agriculture

This bamboo fishing rod was used in the mid to late 1900's and demonstrates that local production of recreational fishing poles was at a high level and their demand was high. Imported recreational sporting goods from either the United Kingdom, the United States of America or Asia countries was due to the larger lead up times from these suppliers and the greater import costs from slower ocean supply ships. It was only after World War II that the trade influx from other countries has supplied cheaper goods. This recreational fishing pole is highly significant to the Kiewa Valley as it demonstrates that recreational fishing has been evolved from the need to supply a balanced diet by the early pioneer families of fish from the major Kiewa rivers. The ability of the Kiewa Valley rivers to provide a good fishing environment (high protein diet) for both early indigenous families and early pioneers was the important food source that provided for a balanced diet and the higher level of nutritious development of both body and mind. This two piece wooden fishing Rod is made from bamboo shafts or poles, one length thicker than the other. The smaller diameter shaft is the top end and fits into the longer thicker shaft at a stainless steel tube end.The smaller shaft has a stainless steel reinforcement ring where both shafts fit together. At the bottom end of the thick shaft is a black rubber "stopper" or "foot". There are two stainless steel rings, each with a reel holding "bulge" which allows for the the reel's "prongs" to be secured. The top ring has a greater diameter allowing it to move up and down the shaft/pole to secure the top "prong" firmly onto the shaft/pole.recreation, river, rod, fishing, industry, fish

Slawa built the umbrella using existing and modified umbrella parts purchased from manufacturers and other sources with the idea to develop a more practical umbrella. At the time Slawa was a student studying sculpture at the Akademie der Bildenden Kunste Wien (Academy of Visual Arts). She spent many months developing the prototypes in secret before she applied for and received a patent on 19 September 1929. The patent documentation for Flirt noted that although foldable umbrellas with telescopic shafts were not new, the inventor's umbrella was a significant improvement as it was smaller and more practical as the folding mechanism had been considerably simplified. The umbrella was included in the Inventors’ pavilion at the Vienna Spring Fair in 1931. In a contemporary newspaper report it was described as ‘the magic umbrella of the sculptress’. After the design was granted a patent, it was contracted to the firm Basch and Braun, which authorized its manufacture under licence by the largest Austrian umbrella manufacturer in Austria Bruder Wuster and a German firm Kortenbrach und Rauh. It was called Flirt. In the first year of production sales reached 10,000. This number increased steadily each year as sales spread throughout Europe and the Flirt umbrella was still being produced in the post-war period. Slawa was paid royalties till 1938, the year that she left Vienna and fled to Switzerland. In 1939 with pressure from the Nazis she sold her rights to the company Bruder Wuster. Ann Carew 2016The umbrella prototypes have national and international aesthetic significance as examples of technological innovation in industrial design. The archive has national and international scientific and research potential – detailed records concerning the development of the design, patent and its manufacture are held in the studio. The archive demonstrates the links between the realms of fine art, industrial design and manufacturing in Vienna in the early twentieth century. The sale of Slawa Horowitz-Duldig’s rights to the umbrella under duress from the Nazis makes this archive historically significant. The provenance is excellent, and the prototypes and accompanying documentation have national and international interpretative potential. Ann Carew 2016Three handmade compact foldable umbrella prototypes. The prototypes have black silk covers, a metal shaft, handle, ribs and ferrule. The shaft has a telescopic mechanism. The top and the end of the handle are metal disks. The related documents, designs, patent documentation, a hand written record of her inspiration for the design, and other archival material are also held in the Studio’s Collection.

Grinding Wheel, with wood shaft through centre. Has nails in wood shaft to stop handle from pulling out.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, grinding wheel

Wooden carpenter's marking gauge - wooden shaft with square wooden block three quarters down shaft which is movable.trades, carpentry

Collections of 48 medium sized corroded nails with a square heads. Rectangular shaft narrows to a square shaft and blunt tip.archaeology, historic building, former royal mint

Long curved wooden shaft with a wooden grip attached at right angles via a steel U-bolt. The long steel curved blade is fitted perpendicular to the wooden shaft and it projects towards the left hand side of the shaft. The blade has a groove that goes into a U-bolt which tightens it onto the shaft.

Typed, 2 page document, detailing the location and history of the operation of the Pearl Mine. The mine was located approximately 2 miles north west from the Bendigo Post Office. The main shaft was put down to 1613 feet and 3 subsidiary shafts were sunk, Information is given about the south shaft, originally the main shaft of the Great Extended Hercules and the east shaft, which was situated on the Sheepshead line.bendigo, mining, pearl company mine