Damaged workers helmet. Head protection worn by construction worker damaged during a collapsed trench accident in Cherlin Drive 1979.The object illustrates the importance of wearing appropriate safety equipment.Grey plastic safety helmet, with fabric straps and rubber head fitting. Helmet has a large crack in the brim and a dent in the head area.Inscription : Protector Tuff master/approval G.M.E. HH22 BS2826-ASZ10-67warrnambool, safety equipment, water supply

A hammer is a tool with a heavy head and a handle, often made of shock-absorbent wood or fiberglass that is used to strike an object. The most common uses for hammers are to drive nails, fit parts, forge metal, and break apart objects. Hammers vary in shape, size, and structure, depending on their uses. Hammers are basic tools in many trades. A hammer is composed of a head most often made of steel and a handle also called a helve or haft. Most hammers are hand tools. A traditional hand-held hammer consists of a separate head and a handle, fastened together by means of a special wedge made for the purpose, or by glue, or both. This two-piece design is often used, to combine a dense metallic striking head with a non-metallic mechanical-shock-absorbing handle -to reduce user fatigue from repeated strikes. If wood is used for the handle, it is often hickory or ash, which are tough and long-lasting materials that can dissipate shock waves from the hammer head. A well used hammer with wooden handle and steel headpioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham, tools, craftsman, carpenters, blacksmiths, builders, woodwork,

A ring called the hoop is used to attach the head to the shell, and the tuning bolts are tightened to tighten the head. The hoop is supported by the lug, and the hoop and lug are attached using a tuning bolt. Long ago, animal skins were used as drum heads, but now drum heads are primarily made of plastic. Basically, when the tension on the head is higher, the tone is higher, and when the tension is lower, the tone is lower.A Cylinder made of metal and wood 37 centimetres diameter and 21 centimetres high. It has a red, black and white wooden trim on the top and bottom and is held together with six metal clamps. There is a drum head on the top and bottom of the cylinder. Ever Play Extra brand is on the top drum head.Lowe musical instruments, drum, sandhurst drummers

Medium sized pickaxe head. Used for loosening the soil in digging, shaped like a mattock, but having both ends pointed. Iron pickaxe head, medium size, (no handle)pickaxes, tools

This mallet has a cylindrical head and would have been used to guide chisels for woodworking. The hammer end has a larger surface area than oblong mallets and gives greater control with less force. Wooden mallets don’t damage the metal head of the chisel as would an iron hammer. Wooden mallets would also be used to knock timber furniture together without damage.Wooden mallet with turned grooves around head - 2 double and 1 single. Oak handle. Head has cream paint remnants both sides.mallet, hand tools, wooden tools, churchill island

Poppet Head and Winch House of Federal Mine. Group of 14 men and boys standing in front of mine. George Charles Cox (Sen) fifth from right.Base of Poppet Head and Engine shed with row of 14 men and boys posing in foreground. Chimney stack is behind Poppet Head in photo.stawell gold mining

This photograph shows Mr Alex McDonald, the head of the Education Department, opening the new extensions at the 1962 Golden Jubilee of the Orbost High School.Orbost High School / Orbost Secondary College has played a significant part in the education of senior students in the Orbost district . It is the sole senior educational institution. This item is representative of its historyA black / white photograph of a man standing behind a lectern on a stage delivering a speech. There are other seated behind him.on back - " Mr Alex McDonald, head of Education Depet. Orbost H.S. Jubilee, 1962"

The Marine Safety Act, Victoria requires that lights must be displayed from sunset to sunrise and in times of restricted visibility during daylight hours. A vessel's lights should indicate: what type of vessel it is, what the vessel is doing, the direction that the vessel is travelling in. E.G. For vessels under 50 m in length, a second masthead light is optional. For vessels under 12 m in length, sidelights may be a combined lantern on fore and aft centreline. Every vessel at sea must show light to indicate type of vessel, directionof travel and speed.Three metal navigational lights; red port, green starboad and clear head light. S/N Side Light (red) Elect. S/N 432 Side Light (Green) Elect. S/N 433 Head Light Elect.navigation light, marine safety, navigation, safety equipment

The brigantine TORONTO entering at the Heads of Port Phillip Victoria under sailBlack & white photo of the brigantine TORONTO at the Heads of Port Phillip VictoriaRefer Notes section for detailssailing ship toronto

This hat stand appears to have been made by the English firm of Battersby & Company, a hat manufacturer established in England in the late 19th century. The stand may have been fitted on to the head by the Melbourne firm Ramie Specialty Co. Battersby hats must have been sold extensively in Australia.This hat stand is useful for display purposes and of interest because of its possible composition (ramie)This is a model of a head used for displaying men's hats. The head is made of composite material , originally a gold colour and lined what what may be the vegetable fibre, ramie. The head is mounted on a wooden stand with a stepped base. There are two labels, one on the neck of the head and the other on the back of the stand. The head is chipped and stained, with exposed nails. Battersby Hats Ramie Specialty Co. Pty. Ltd. Melbournebattersby hats, model head stand, vintage men's clothing, ramie

Sylvia Williams was head of the Ballarat School of Mines Dressmaking Department between 1845 and 1960. Previously she had been a staff member of the E. Lucas and Co., clothing manufacturers of Ballarat and Melbourne. Black and white image of the head and shoulders of a woman. She is Sylvia Williams, former head of the Ballarat School of Mines Dressmaking Department. ballarat school of mines, williams, dressmaking, lucas, sylvia williams, staffmember

Cast iron mercury bucket, used to hold mercury, potentially in the process of recovering minute pieces of gold mixed in soil and sediments. See research page for description of one process of using mercury to extract gold.gold mines, mining equipment, mercury bucket, miners used mercury in a number of ways to amalgamate gold, with each mill or battery operator having their preferred method depending on the nature of the ore. by the late 1850s the most common way of crushing goldbearing quartz ores or consolidated alluvial cements was in a stamp battery. the battery featured heavy iron stamp heads held in a frame, with each head often weighing up to 500 pounds (226 kg) or more (see msv 1880, page 45) (birrell 2005). stamp heads were lifted and dropped by a rotating overhead cam shaft driven by a steam engine or water wheel. ore was fed into a large cast-iron battery box, mixed with a steady stream of water, and pulverised by the stamp heads. in some batteries, mercury was placed in the base of the boxes to amalgamate with freed gold. the violent agitation of the mercury in the mortar box, however, could cause the mercury to break into myriad tiny globules that were carried away by the water with the tailings, thus losing a certain amount of gold in the process (thompson 1867; ritchie & hooker 1997). the water and sand slurry was splashed by the falling stamps from the box through fine mesh screens and onto inclined wooden tables below the mortar box (figure 2). the tables were covered with copper sheets or plates coated with mercury, which caught and amalgamated with a portion of the gold. the grey putty-like amalgam was periodically scraped off the sheets and retorted in a furnace to collect the gold and recover the mercury for reuse. mercury was inevitably lost from the plates, while poor maintenance resulted in further losses of gold and mercury in the tailings. mercury use and loss from gold mining in 19th century victoria. peter davies1, susan lawrence, and jodi turnbull, department of archaeology and history, la trobe university.

Magdala cum Moonlight Mine Poppet Head 1899 Darling Road can be seen passing under the trestle tramway. Just in front of the first ore bin, a man can be seen opening the door of the bin to fill a dray for the crushing battery.Poppet Head and surrounding infrastructure.stawell gold mining

1 Case with zipper: 1 Battery holder; 2 globes; 4 plastic ends; 1 May ophthalmoscope head: 1 metal viewer attachment.Case: "HEINE", "GERMANY" Instrument: "ANAX", "GERMANY" Head: "HEINE", "Miroflex", "Anax" "C-00. 13. 102"

POPPET HEAD ERECTED 1865 AND USED TILL MINE CLOSED 1890. THEN USED FOR SHORT PERIOD 1930-32PHOTOCOPY OF PHOTOGRAPH, POPPET HEAD, PORT PHILLIP MINE, CLUNESlocal history, photography, photographs, mining

aboriginal stone axe head found on Jack Bourke's property (Albert Road) January 1972Stone axe head. Hole at one end and groove made for twinelocal history, ethnographic material, hunting, fishing, gathering, stone, aboriginal

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Tapered head used in blacksmithing or for rock chippingHammer medium size, metal head, wooden handle, pointed on one end and square on the other. Handle thick at bottom end and tapered at top where head fits on.kazenwadel, blacksmith, wood, tools camp 3, metal

The main photograph of the battery, "Vivian" a 24 Head Stamper is now in Beaconsfield, Tasmania. The battery head stamper was made in 1862 for crushing gold ore for the "Newchum" mine at Pleasant Creek (now Stawell) Victoria. In 1933 the Chintock family used the Head Stamper to cruse tin ore in a mine at Blue Teir in north-eastern Tasmania. It is not know how or when "Vivian" the battery head stamper came to Tasmania. In 1993 the battery was restored as is a working exhibit in the museum at Beaconsfield Tasmania.Two colour photographs, one of the Battery and the other information about the Battery. The main photograph of the battery, "Vivian" a 24 Head Stamper now in Beaconsfield, Tasmania. The battery head stamper was made in 1862 for crushing gold ore for the "Newchum" mine at Pleasant Creek (now Stawell) Victoria. Beaconsfieldstawell, mining

This wooden spear has separate tip, barb and tail extensions bound by sinew and resin. The spear head is flattened on the barb side and sharpened to a fine point. The side opposite the barb is convex. The shaft has a tail extension which is 25cm long and bound with resin and sinew to the shaft at an angle of 20 degrees.The head has a subtle cross hatch design between the barb and the neck.

This brass cow bell was recovered from the wreck of the sailing ship ‘Loch Ard’ at Mutton Bird Island, near Port Campbell, Victoria, from late 1960s to early 1970s. Cow bells were listed as part of the cargo on board the Loch Ard. This bell is now part of the John Chance collection. Flagstaff Hill Maritime Village’s divers also recovered similar bells from the Loch Ard wreck in 1973. One of them was found in a sandy hole in the centre of the wreck site. All of the recovered cow bells are without their hangers. A bell of this size could have been used by horse or cattle teams. Cow bells were a common Colonial item. They were hung around the necks of grazing domestic cows and goats, bullock and horse teams, even camel teams so that they could be found again. Sheep and cattle drovers used them as a warning for night time disturbances such as wild animals. The maker of the cow bell, James Barwell, was a bell founder established in Birmingham, England, from 1784. In 1842 he acquired Fiddian’s firm of ‘Steam and Water’, keeping its name and stamping it on some of his products. According to his advertisement in the Exhibitors guide for the Church Congress of 1887, he made bells and fittings for churches and schools. He also made bells for cloches and chimes, and made tuned musical handbells. He repaired and reproduced bells, and he had a team of experienced ringers to “inspect towers and report upon the tone and condition of bells and fittings.” In 1903 he became incorporated as a Limited Company, ‘engineers’ and plumbers’ brasswork, and bell founders.’ In 1914 he advertised as ‘Cock and Bell Founders’, specialising in plumbing and engineering fittings, church bells, and “every description of hanging and hand bells.” Some of Barwell’s products were stamped with his maker’s mark (his initials J. B. either side of a cross entwined with a ‘B’ in an oval of oak leaves (for Birmingham)). James Barwell bells were no longer made after 1920. James Barwell was among makers who exported bells to the Australian colony from the 1860s. Early Australian iron animal bells were also made from the 1860s by blacksmiths such as Anthony Morgan from 1861, August Menneke from 1867, and Samuel Jones from 1868. Few brass bells were produced here in those times. This bell is historically significant as typical of a cow bell used by farmers and herdsmen in Colonial Victoria. Its significance is increased by being an artefact recovered by John Chance, a diver from the wreck of the Loch Ard and other wrecks in the late 1960s to early 1970s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The cow bell is also significant for being part of Flagstaff Hill’s collection of artefacts from LOCH ARD, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Cow bell; heavy brass, flat top, pyramid shape, rectangular head, shoulders flare out to rectangular mouth. The head has two same-sized tooled holes for adding the hanging yoke. Inscription on top and one side. Encrustations are on the metal in places. The hanger and clapper are missing. Made by James Barwell of Birmingham.Stamped on the head "BARWELL / - - - / - - -- ING" [Perhaps BARWELL - - - BIRMING. Could size be in centre? 3 3/4 IN?] Stamped on side [motif] (undecipherable) flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, loch ard, mutton bird island, glenample, eva carmichael, tom pearce, james barwell, cow bell, horse bell, bell founder, bell smith, vintage bell, birmingham bell foundry, farmer, shepherd, drover, stock bell

Head of Geology department at School of Mines Ballarat which is a predecessor of Federation UniversityBlack and white Portrait of H. Yates Head of Department 1920 - 1962 in a red framehead of department, photograph, geology, p. l. day

Head of Geology department at School of Mines Ballarat which is a predecessor of Federation UniversityBlack and white Portrait of C. Fenner Head of Department 1914 - 1917 in a red framehead of department, photograph, geology, p. l. day

A thumb tack, push pin or drawing pin is a short nail or pin used to fasten items to a wall or board for display and intended to be inserted by hand, generally without the assistance of tools. A variety of names are used to refer to different designs intended for various purpose. Edwin Moore invented the "push-pin" in 1900 and founded the Moore Push-Pin Company. Moore described the push-pin as a pin with a handle. Later, in 1904, in Lychen, German clockmaker Johann Kirsten invented flat-headed thumb tacks for use with drawings. A thumb tack has two basic components: the head, often made of plastic, metal or wood, and the body, usually made of steel or brass. The head is wide to distribute the force of pushing the tack in, allowing only the hands to be used. Many head designs exist: flat, domed, spherical, cylindrical and a variety of novelty heads. Cardboard box with sliding insert that contained 3 Doz. GURA Brand Thumb Tacks On box ; MADE IN GERMANY / BEST / QUALITY / 3 doz. / THUMB-TACKS / Pin will / not pass / through the head / GURA / Trade Mark

Established in 1891 in Eindhoven, the Netherlands, Philips & Co. was founded to meet the growing demand for light bulbs following the commercialization of electricity. Science and technology underwent tremendous development in the 1940s and 1950s, with Philips Research inventing the rotary heads that led to the development of the Philishave electric shaver, and laying down the basis for later ground-breaking work in transistors and integrated circuits.Philishave was the brand name for the electric shavers manufactured by the Philips Domestic Appliances and Personal Care unit of Philips They used the Philishave brand name for their shavers from 1939 to 2006. The Philishave shaver was invented by Philips engineer Alexandre Horowitz, who used rotating cutters instead of the reciprocating cutters that had been used in previous electric shavers. The shaver was introduced in 1939, though initial production was limited due to the outbreak of World War II. A more ergonomic egg-shaped single-head model was introduced in 1948 and was designed by US industrial designer Raymond Loewy. Global sales increased markedly after a double-head model was introduced in 1951. As a spin off from the light bulb and research is the dynamo-powered bicycle lamp. Its rotating power system inspires the Philishave triple head electric razor. A triple-head model was test marketed in Australia and New Zealand in 1956, but would not be introduced globally until 1966. The brand name Philishave was phased out in 2006 so shavers now bear only the Philips name. Mr Alfred William ( Bill ) Roper, 1913 - 1996 grew up in Ripponlea, ( East St Kilda ) Victoria. As a child he went with his father Arthur Leopold Roper to purchase vegetables from the Moorabbin Chinese market gardeners at the Hotham St. / Nepean Highway corner. c1920 . Bill served in WW2 in New Guinea and post war was Army Auditor, Victoria Barracks, St Kilda Road Melbourne. His staff presented this 'Philishave upon his retirement and he used it until his death1996. He lived in Carlton, Belgrave, Ascot Vale, South Yarra, East St Kilda and moved to Bentleigh in 1987.A ‘Philishave’ triple head electric razor , with cord, head protector and cleaning brush in a hinged plastic case The case has compartments, for Razor and cord, that are lined with a mustard coloured, soft, synthetic material .Case top PHILIPS ; inside EXCLUSIVE PHILISHAVE Razor Handle front PHILIPS / PHILISHAVE; back Type HP 1121/ 110-130V/ 220-240 V / PHILIPS Shield / ? Shield / BS 3456 / V 75255 / MADE IN HOLLAND Nameplate Presented to / BILL ROPER / On the occasion of his retirement / BY THE STAFF OF / DEFENCE AUDIT BRANCH / May 1977 philishave, royal philips electric company, razors, electric razors, bentleigh, moorabbin, market gardeners, st kilda markets, world war 2 1939-1945, department of defence melbourne, melbourne, roper alfred william, roper arthur leopold, ripponlea, chinese market gardeners

Head of Geology department at School of Mines Ballarat which is a predecessor of Federation UniversityBlack and white Portrait of Professor T.S Hart Head of Department 1897 - 1912 in a red frameprofessor t.s. hart, head of department, photograph, geology

Head of Geology department at School of Mines Ballarat which is a predecessor of Federation UniversityBlack and white Portrait of P. L. Day Head of Department 1962 - 1986 in a red framehead of department, photograph, geology, p. l. day

Poppet Heads, Ore bin Winding Engine Shed Sloane's & Scotchmans United Quartz Mining Co looking North West Moonlight dams in background. Mine on left is the old Extended mine where the winding engine shed has been destroyed by fire. Just behind that is the Winding Engine Shed of the Oriental Mine without the poppet head.View of two mine sites with poppet heads and engine sheds. Settling dams in background.mining, panorama

Head of Geology department at School of Mines Ballarat which is a predecessor of Federation UniversityBlack and white Portrait of Professor F. M. Krause Head of Department 1880 - 1895 in a red framehead of department, photograph, geology, p. l. day

Clay pipe, replica depicting the head of Southern Slave. Original pipes given to bidders at the time of slave sales in America. This replica made middle to late 20th century.From a collection held in Greensborough.Replica Clay pipe depicting the head of Southern Slave. No maker's marks.Made in England stamped on stem.pipes, smoking pipes

Historic - Puffing Billy Railway Locomotive Head Board used in the Celebration of Santa Christmas Special Trains Historic - Puffing Billy Railway Locomotive Head Board used in the Celebration of Santa Christmas Special Trains Locomotive Head Board - Santa - Christmas Special Train Circular Wooden sheet with vinyl stickers puffing billy, head board, santa train