A cream coloured cardboard cover with black information on the front. Top right hand corner reads TM 11-5820-398-12. Nar the botton of the cover there is an United States of America War Office insignia with Headqyarters, Department Of The Armu November 1965. There are five punch holes down the left hand side and the manual is held together with two metal staples.manual, repair parts, special tools, radio set an/prc-25, united states of america war office

Portable gasoline stove used by soldiers in Vietnam. Black metal with a maroon tap to operate.gasoline stove

from the collection of Betty McPheeA small grey commemorative pencil with symbol and name of Needlework Tool Collectors Society of AustraliaNeedlework Tool Collectors Society of Australiadomestic items, writing equipment

Metal Footprint tool (large)tool, footprint

Eyelet maker used in leather work ca1900Used and sold by Holden and FrostMetal spike tool with wooden handletool, eyelet maker

Hand made tool from Collins Bros Millcollins bros mill pty ltd

Used to emboss leather ca1910We believe this was used and sold by Holden ca1900 for embossing leatherMetal tool with wooden handle and serrated wheelshoemaker, tool

Small hand tool. May be yarn hooks. From Collins Bros Mills.

Small footprint tool with "The Footprint" and "Made in England" on handle.The Footprint, Made in England.tool, footprint

One of Phillip Islands earliest industries was chicory farming. The first kiln was constructed in 1870. The chicory scoop was used for turning the chicory over on a mesh floor above the furnace. This scoop was imported from Europe in the late 1880's.Chicory scoop with wooden handle, wooden scoop and steel joins and reinforcments.phillip island, wood, steel, tool, chicory, kiln, chicory scoop

Small hand tool. It has been made utilising one end of a spindle as a handle. From Collins Bros Mill.

Metal footprint tool with "made in England -Shefield" Footprint 698As abovetool, footprint

The subject item is a vintage Nautical Shipwrights Ship Boat Caulking Hammer Mallet, Unusual Small Size. These mallets were routinely used in the 1800s when ships were made of wood. This mallet was used with caulking irons to drive the oakum (caulk) between the ship's bottom planking to seal them up. The mallet has slots to dampen the vibration of the mallet blows on the user's elbows. The head is made of a very hard wood, possibly Lignum Vitae or another dark tropical wood. The item seems to be of a very early design with the two preened-over metal rods for reinforcing the head. Item appears to be of early manufacture by an unknown maker from the mid to late 19th century and is significant as tools of this era are quite rare. This tool is also significant as it gives an insight into how ships made of wooden planks were made sea-worthy by inserting caulking material between the boards thereby making the vessel watertight. Caulking Mallet Wooden with iron ferrules on each end. Wooden head with two large bolts passing through body. Stamped W Milne. James S Steele tool box.Stamped W Milne & James S Steele tool box.mallet, flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, caulking mallet, caulking, james steele, shipwrights tools

Facsimile of Thomas McPherson & Son - Catalogue No. 10 T., Woodworkers' Tools: Woodworkers tools for Joiners, Splitters, Sawyers, Carpenters, Cabinetmakers, Pattern makers also Bricklayers, Masons and Plasterers. Spiral bound reprint, soft cover, 90p plus original index. non-fictionReprint of 1909 hand tool cataloguetools, woodworkers' tools, thomas mcpherson, hand tool preservation association of australia inc.

This is a manual hedge trimmer which has a push pull action. It is not a very common garden tool possibly a lot slower to use than clippers. It dates from mid 20th century.This is quite a rare tool.This tool is consists of a metal bar with a row of prongs attached . A blade on one end is moved along the length of the metal bar thereby trimming the bush. There is a wooden handle attached to the metal bar and a wooden ball and spring on the righthand side.Code Half Time. Made in England Pat App No 16418/49warrnambool, tool, hedgetrimmer, code halftime

An adze is an ancient and versatile cutting tool and has been in use for thousands of years. Adze are similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. They have been used since the Stone Age. Adzes are hand tools used for smoothing or carving wood.The adze has been used for centuries for cutting and shaping wood. It is a maritime tool, as well as being used in other trades. This adze is an example of that tool.Tool; long wooden curved handle with a heavy shaped head, similar to an axe. Inscriptions are on the blade. Made in England.Stamped; "38" & "2" " Made in England"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, axe, adze, ship's adze, tool, hand tool, wood working tool, cutting tool

J.E. Bleckmann were German Blade makers, registry shows Bleckmann (1899, No. 37190):J.E.Bleckmann, Solingen, registry class 9b). As well as blades for wood working tools they were also sword makers (used in American Civil War), Bayonet makers 1871-1918 and also pocket cutlery (pocket knives) as per advertisement 1907.This wood plane holds historical importance as carpentry tools such as this would have been used in the construction of local homes, outbuildings, furniture. It represents an era before power tools. Investigation is ongoing as to ownership and specific use in the area. Hand made wooden hand plane with metal blade. Carpentry tool from 19th century1/38 / 34 mm stamped into wood on front edge of plane. Metal Blade inscribed "J.E. BLECKMANN/ WARRANTED / CAST STEEL / SOLINGEN/GERMANY"tool, blade makers, hand plane, woodworking.

This tool is used to clamp and hold pieces of timber together during the process of joining or compressing two pieces of timber together. The first block is stationary and attached to the end of the base while the second block moves with the turning of a long screw. It is used also in the process of bookbinding with a similar holding intent.An interesting object with a specific purpose which is still in working order.Wooden triangular shaped block which is divided in two pieces with one piece being moveable with the turning of a turned wooden screw device. It is quite heavy which would suggest that the timber is quite dense warrnambool, wood press, mitre press, book binding press,

140.1 Green wooden carry box with hinged lid and metal latch. 140.2 Metal device with spring loaded handle, rollers and pointer assembly and graduations. Box has brass plate with tension scale for various aircraft types, tool has 76 stamped on the handle.cable tension tool, tool

A spokeshave is a very short plane, oriented horizontally, with a handle on each side. It is a general purpose tool for circular work when working with timber or leather. Commonly used by painters, wheelwrights and saddlers. This exhibit features an iron cutter clamped between two wooden handles, one of which can be unscrewed to enable it to work in cramped spaces. Four faced Shave-Spokeshave with an iron cutter clamped between two screw handles. This version features one detachable wooden handle which can be unscrewed to enable it to work in cramped spaces.'Fitch' embossed into handle - right hand endplane, shave, spokeshave, fitch

cast iron, hand tooled, with movement up and down. Originally had a strike plate. Possibly from the Athenaeum front gate when the Athenaeum was fenced. A 1930's photograph shows a picket fence with a front gate.Handmade cast iron with markings of tooling.

A caulking tool is used in the process of waterproofing joins in timber. It has been well used, as evidenced by the broken edges on the flat round head.The tool is made by Mathieson, a renowned tool maker. Caulking tool, single crease offset iron, 2⅛". The flat head is partially broken. Inscription stamped into stem. Made by Mathieson. Stamped into stem: "MATHIESON"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, caulking tool, tool, ship building, boat building tool, mathieson

A small metal hooked tool for the "Beehive" benchtop sock knitting machine.A small metal hooked tool.knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting

Used circa 1900 for boot makers to put lace holes in leather boots/shoesused during the late 19th and early 20th centuries for boot makingeyelet tool with wooden and metal hook bent to 90 degrees for pressing eyelet holestool, cobbler, hole making

Implements with a hard smooth roundedend or surface used for smoothing and polishing.Set of four burnishing tools used to polish leather. 3 - Metal with wooden handles. 1 - All metal with patterned ends,L. Richter Northampton on wooden handle, double ended tool with round middle.burnishers, polishers, surface finishing tools

A hand tool used with a bit to drill holes, usually in wood. Pressure is applied to the top and the tool is rotated with a U-shaped grip. This example has two wooden handles.On the metal pipe says "Stanley". On other side is No,144 10in.carpentry, tool