A coping saw is a type of hand saw used to cut intricate external shapes and interior cutouts in woodworking or carpentry. It is widely used to cut mouldings to create coped rather than miter joints. It is occasionally used to create fretwork though it is not able to match a fretsaw in intricacy of cut, particularly in thin materials. Coping saw blades are always thicker and much coarser cutting than typical fretsaw blades. A coping saw consists of a thin, hardened steel blade, stretched between the ends of a square, c-shaped, springy-iron frame to which a handle is attached. The blade is easily removed from the frame so that the blade can be passed through a drilled hole in the middle of a piece of wood. The frame is then re-attached to the blade and the cut starts from the middle of the piece. Long cuts perpendicular to the edge of the material are possible but the shallow depth of the frame rather limits how far from the edge one may cut. The much deeper frame of the fretsaw is more useful for cutting well away from the edge but conversely cannot manage the thicker materials commonly cut by the coping saws. The coping saw blade is installed with the teeth pointing towards the handle. Unlike a hacksaw, which has the teeth pointed away from the handle, the coping saw cuts on the pull stroke. The coping saw blade is removable by partially unscrewing the handle. The blade is prevented from rotating by means of the short, steady bar provided where the blade is attached. Loosening the handle also allows the blade to be rotated relative to the frame as desired. Carefully aligning the finger steady bars at the top and bottom of the blade ensures that the thin blade is straight and not twisted along its length. Re-tightening the handle tensions the blade and locks it at the desired angle relative to the frame. The short steady bar nearest the handle is held securely between finger and thumb while the handle is tightened to ensure the blade remains at the desired angle. Unlike the fretsaw the coping saw blade has holding pins which lock securely into the angled slots of the rotatable blade holders. Gentle curves are achieved by slowly turning the whole frame by means of the handle while continuing to cut steadily. A coping saw with wooden handle but no bladetools, saws, steel , clamps, metalwork, woodwork, carpentry, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham, fretsaw, coping saw, bowsaw, blacksmiths,

A coopers turning or bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw with a thin toothed blade that is held in tension by a frame with two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher.An age old tool used for cutting timber for hundreds of years before the modern cross cut saws were invented. This design of saw was part of a Coopers tool kit and used in the production of making barrels. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bow saw wooden handle with metal bladeNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, turning saw, coopers tools, cutting wood, sawing timber, coopering

A coopers turning or bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw with a thin toothed blade that is held in tension by a frame with two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher.An age old tool used for cutting timber for hundreds of years before the modern cross cut saws were invented. This design of saw was part of a Coopers tool kit and used in the production of making barrels. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bow saw wooden handle with metal blade & frame tightening rodNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, turning saw, coopers tools, cutting wood, sawing timber, coopering

Bendigo Advertiser ''The way we were'' from 2000. Iron works: 21 Garsed Street, Bendigo, circa 1900. Garrett John Sweeney was born in 1847 in Dublin, Ireland. He opened his timber and saw milling yard in 1882. The factory was able to produce all types of fancy wood products to supply builders within a 100-mile radius of Bendigo. The two-storey building housed machinery on the ground floor and timber stocks upstairs. The clip is in a folder.newspaper, bendigo advertiser, the way we were

Collection of Accounts, 1911-12, G J Sweeney, Railway Steam Saw and Mouliding Mills, Sash and Door Factory (Wood Turners, Timber, Lime, Iron and Cement Merchants), Garsed St.business, retail, general, h. j. sweeney & sons

This photograph is from the Max Harris Collection held by the Ballaraat Mechanics' Institute. Please contact BMI for all print and usage inquiries.ballarat, wilkinsons, saw mills, timber, wood, mill

Original photo held by Ron BEDFORD (Ballarat) and scan taken 24.05.2011Black and white photo of Port Melbourne YMCA football team 1946, VFA sub-district (under 20). Players are identified on the photo."Lorraine Studios" stamp on rear in red. 159 Bay St Port Melbourne. Phone MX2763sport - australian rules football, s bigg, k jordan, k fennessy, b watts, mustan, r murray, w murray, m maher, a sortell, c seddon, r ralph, r marasceau, v thompson, lavery, j woods, t williams, foote, b balitho, i bedford, a foote, n fehr, r bedford, r newman, l saw, a freeman

Ceramic bowl found in hut belonging to Georgie Ah Ling, who operated a market garden for about 70 years on the edge of the township of Donald. Hand-molded blue and white ceramic bowl. Outside of bowl has underglaze blue decoration of flowers, leaves and Chinese characters. Saw toothed decoration, with one line underneath, around outside rim. Half moon shape lines, with two lines through them, decorate inside rim. Two lines around inside base with one Chinese character in centre of inside base.One Chinese character on inside base of bowl. Four Chinese characters and five plant symbols on outside of bowl. ceramic, bowl, hut, georgie ah ling, market garden, donald

Early Industrial Timber working Flat Belt driven saw bench Historic - Early Industrial Timber working Flat Belt driven saw bench Wood framed with a sliding table and a steel shaft with a pulley on one end and a saw blade on the othersaw bench, puffing billy, flat belt driven

The Boyd's saw this type of floor covering at the Shelmerdine's house and liked it and purchased it. See also item F071.Cream wool with fringe."Woods Carpets Cleaning" 2 labels. Cleaned 11/9/96 and "1960".walsh st furnishings, robin boyd

Wooden handle with metal attachment to which two screws are attached, used as one handle (there were two) for a cross cut sawcutting wood, mining, farming, building, transport, sale

More than likely used by members of Engineer Platoons etc. during WW2Length of chain with teeth used as a chainsaw in WW2? Comes with two wooden handles, one original with a brass band, and contained in a leather pouch with two belt loops.SN & DY 1C on the inside of the leather pouchchainsaw, ww2, world war 2, wwii, world war 11, engineers, wood cutting

These carpentry items were owned and used by Archibald (Mick) Blackley, a local long-time resident of Numurkah. Born 1912 in Numurkah, Mick was the son of Archibald (Senior) and Grace Blackley, also residents of Numurkah. Archie Senior was a carter, horse-breaker, conducted a livery stable and worked at Brown Corke & Co for a number of years. Archie also served in the Veterinary Corps in WW1. Some of the tools donated belonged to Archie Senior eg wooden hand planes. Mick Blackley used his dad’s tools (and also added some of his own) when he worked in various carpentry jobs during the 1930’s and 1940’s. One particular carpentry job was during the depression when Mick relocated to the Wonthaggi State Coal Mines building stables for the horses, and also completing some building works inside the mines. Returning to Numurkah, Mick joined a Mr Murray as carpenter and painter to build and repair houses. He then joined another builder for 4 years (We think this was Jim Tuttle). Mick then went on to work at the Butter Factory (originally called Holdenson & Nielsen) where some of his carpentry skills were still used. Item list: • Wooden box for carpentry tools • 1 x steel pliers • 2 x wooden hand planes • 1 x tin snips • 1 x wooden spirit level in canvas bag • 1 x small wooden spirit level • 5 x wooden handled hand-saws • 1 x wooden handled right- angle square • 1 x wooden handled tenon-saw • 1 x steel plumbers wrench • 1 x wooden handled hedge-clippers • 1 x cloth & leather measuring tape • 1 x wooden mallet • 1 x narrow wooden plane • 1 x plastic handled hand-saw • 1 x plane blade sharpening stone • 1 x brace hand drill • 1 x compass for marking wood • 1 x cold chisel • 1 x set of various chisels and hand drill bits in a canvas bag • 1 x steel sike • Various other drill bits, chisels, files • 1 x wooden handled trowel • • 2 x steel garden secateurs • carpentry, building, wood, tools, planes, levels, chisels, hammers, saws, drills, drill bits

Postcard with title RAIL SPLITTERS printed on the front showing three men and a boy at a large, sawn tree. They all have implements used for cutting and sawing. There is a long gun leaning on the front of the felled tree. The postcard was written by Fred Dorey and sent to his sister Mary.in 1905.POSTCARD MT. DANDENONG SERIES Handwritten in black ink on back: Miss M Dorey 35 Smith Street Fitzroy Mt Dandenong 22.10.05 Dear Mary Write & let us know if you know this photo. Mrs Grant is getting a big boarding house up and Mrs Keys is going put up a new house hoping you are well I remain Your truly Fred fred dorey, mary dorey, tree, rail splitters, wood chop

The 1956 Melbourne Olympics saw the rowing events held on Lake Wendouree Ballarat. This was only set of events held outside Melbourne Region. The Programme, lists the scoreboard abbreviations, the Games Committee, map of the course, Rowing events Committee and Council, Officials, each event, finalists, names position, previous winners, transport services, though did not include Ballarat trams and on the rear cover a simplified programme of events and a map and list of competition venues. Cover printed by Sands McDougall Pty Ltd Melbourne with text by Alex King & Sons Pty Ltd Ballarat. Two contestants of interest are Murray Riley and Mervyn Wood who came 3rd in the double sculls. Wood became the NSW police commissioner in 1977 and Riley was a corrupt NSW Policemen and after leaving the police force became highly involved in the Nugan Hand Bank which was highly involved in drug trafficing, and crime syndicates. See reference.Yields information about the Rowing Events on Lake Wendouree in 1956. The trams were an important transport service to and from central Ballarat for this event.Book - 20 pages, centre stapled, titled "1956 Olympic Games, Melbourne Official Rowing Programme Lake Wendouree, Ballarat" and printed specifically for Tuesday 27 November 1956.All event results have been filled in with the list of countries and their times.olympic games, transport, ballarat, rowing, lake wendouree, events

"Pioneer" chainsaw with green housing. Pull start, no chain. Compliance plate on back (see Below) second plate on top.Compliance plate on back "Pioneer Saws / Model / 450 / Serial No. A10778 / Division of Outboard Marine Australia Pty. Ltd. / Bankstown NSW". Cast in relief on side "Pioneer & Pine Trees".machinery, wood cutting

Employment is a key area that blind or vision impaired people are under-represented. These photographs were taken to demonstrate and provide examples of how blind and visually impaired workers can undertake skilled positions. A woman works at a switchboard, using an assistive device, whilst another woman sits beside her. A young man dressed in a blue coverall and goggles, uses a bandsaw to cut through an object, whilst another uses a circular saw to cut wood. A man in a workshop, with a large toolset on the wall, operates a machine.employment, royal victorian institute for the blind

Russell H Whitehead served in 1 Field Regiment Royal Australian Artillery and saw service in Vietnam between 22/05/1966 to 27/03/1967 total of 310 daysPhotograph Russell H Whitehead in plastic frameat bottom of photograph; 3411520 Russell. H Whitehead / 1 Field Regiment / Royal Australian Artilleryvietnam, plastic, perspex, wood, metal, photograph

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Small Wheel Lorry replicates the vehicle that enjoyed respect from the public during the 1880's and early 1900's. A model of a Small Wheel Lorry with a long four spoked wheeled wooden flay tray drawn by a brown horse. The wooden shafts are to control the horse whilst working. It has a grey wooden ice box with a metal lid with ICE painted in black letters inside a black lined outline on the side. On the side of they lorry or dray is painted WOOD - COAL - COKE - C. MEE LA1271 in black paint. These are long strong carts or drays without fixed sides for carrying heavy loads. They were the truck of the horse drawn era, from the large wool bale lorry to the suburban ice and wood lorry. It has been said they had their origins in the German farm wagon.ICE is painted in black capital letters on the side of the ice box. On the side of the lorry is painted - WOOD - COAL - COKE - C. MEE LA1271replicas, models, scale models, vehicles, horse drawn vehicles, toy horses, drays, carts

A tool to set the teeth of saws used in the early 20th centuryA metal guide used to set the teeth of a circular or crosscut saw when sharpening - i.e. to angle the teeth so that the saw bites into the wood.. It was used in the early 20th century.handsaws, woodworking saws, log saws, woodcutter saws

Used in the late or early 20th Century. Could be used to cut steel.A curved steel shaped wooden handled Bow saw with a curved nail puller near the handle. A metal saw blade is attached by a screw at the end where it is fitted. Used in the late 19th or 20th Century.saws, carpentry tools, woodworking tools, tools, steel, wood, metal

A damaged small black plastic covered Saw Mill Log note book with purchases listed 1963 - 1992. Various names and the wood bought is listed with measurements and amounts ordered and supplied. There is a small white envelope inside with listings noted.non-fictionLog Books were used and still are these days to record information for many different work needs. This small one would have been very practical for ease of use kept on-hand in a pocket.books, documents, notebooks, log books

Used on Burnley Campus for milling large pieces of timber on a platform.Milling saw attachment painted yellow. Decommissioned parts.Nifftimber production, milling wood, sawing wood, arboriculture, horticulture

Piece of paper with a sketch of a Scalebuoy Unit used in conjunction with water treatment & Plant attached to a wood fired Boiler at the Pyramid Hill Butter Factory. Sketch shows the Scalebuoy Unit. Note at the bottom mentions that he did not see the unit as it was intended for use. The unit had been broken up when he first saw it. Would have been about thirty mercury flasks, each of which was covered in an easily removable film of salt deposit. Interest was sparked after cleaning one of the flasks and seeing the engraving. He regretted not taking the whole of the unit. On the back is written the name - Frank Honeychurch-8 Harley St, Bendigo 1/3/02.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, pyramid hill scale buoy butter factory, frank honeychurch

Black and white photographs of various sizes pasted on cardboard for display purposes. Some annotated. (1) (2) Difference between leaf and fruit buds. (3) "The 'rod' or whip is most suitable plant to commence training." (4) Planted and pruned fruit tree. "School of Horticulture and Primary Agriculture Burnley B. 1 " stamped on reverse. (5) "Pear Tree-Unpruned (1) June." (6) "Same Pear Tree-Pruned (2) June." (7) Young unpruned "William bon Chretien". Reverse, Burnley Stamp. (8) Same tree pruned. Reverse, Burnley Stamp. (9) Unpruned pear tree. (10) "Narrabben" plum before inserting branch spreaders. (11) With branch spreaders. (12) Close up of some of its branches without spreaders. (13) Close up of branch with seaders. (14) Plum tree with spreaders. (16) Close up of fruiting spurs. (17) "Apple Blossom Oct. Reverse, p 163(Oct." )(18) Same photograph enlarged. (20) Close up of fruiting buds. (21) Old unpruned apricot tree. (22) "Unpruned branch of apricot tree." (23) Close up of apricot branch. (24) "Same branch-apricot-pruned June Reverse, p99 (June)."(25) Pruned branch stump of mature fruit tree.(26) "Clean saw cuts with sharp knife." (27) "Treat all large wounds on trees to avoid infection by wood rotting fungus." (28) "Apply coating of lead paint or grafting mastic." (29) "Branch of lemon-unpruned Aug. Reverse, p157 (Sept.)." (30) "Same branch of lemon-pruned Aug. Reverse, p 157 Aug."(31) "Young climbing rose-ready for planting-July." (32, 33) Grape vine before pruning. (34) Same vine pruned and trained. (35) Older vine pruned.fruit bud, rod, whip, school of horticulture and primary agriculture, burnley, pear tree, spreaders, plum tree, apricot tree, fungus, lead paint, lemon, roses, grape vine, leaf bud, training, fruiting spurs, apple blossom, grafting mastic, teaching, a w jessep

This item is one of several tools believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a rectangular wood plane, possibly home made. The inserted wood handle may have once been the handle of a saw. A metal blade inserted at the top emerges at the base to form a planning mechanism and rests against a piece of wood.vintage tools, henry phillips