This fish dish is an attractive household item which would have been used in the early to mid 20th century when the more affluent families in society were entertaining. It is not a common item and most likely would not be seen in households today. This dish has no known local provenance but is of considerable interest as a household item not seen today. It will be useful for display.This fish dish has an electro-plated nickel silver holder with two curved pieces of metal joined at the centre to form a base. There are four round metal balls at each end of the curved metal to stabilise the stand. Four curved metal pieces are attached to the base and hold a rectangular-shaped piece of metal and a handle. Fitting into this piece of metal is a cut glass container which is heavily patterned on the sides and base. The lid of this container is rectangular with rounded edges and silver-plated. The top of the lid has a silver-coloured free-standing fish model attached to the lid by a metal stud. The fish is a little loose on its stand. The handle can be folded down. ‘E P N S 62’ household items, history of warrnambool

This hat is one worn by members of the Boy Scouts. Warrnambool today has two Boy Scout groups and Allansford has one. The Warrnambool Tooram group has halls at the corner of Banyan and Timor Streets and in Otway Road and the Warrnambool Norfolk group has its headquarters at the corner of Kepler Street and Raglan Parade. This hat is of interest as an example of the hat worn by scouts in Warrnambool in the 20th century. The same type of hat is still worn by Boy Scouts today. This is a khaki felt hat with a wide brim The crown is folded in 4 sections with four eyelets. There is a brown leather band around the crown and a silver-coloured buckle and two silver studs. The band is adjustable and a piece of string with a knot is used for adjusting the chin strap and for hanging the hat on a peg. The chin strap is made of plaited leather and the inside is slightly stained. The hat is slotted into a wooden frame made of varnished plyboard. The frame is U shaped with two straight sides. A smaller added section of plyboard has been placed on top of the frame and this has an opening at the top to allow the hat brim to slot into the frame. This frame appears to be home-made. scouting in warrnambool, history of warrnambool

Pure wool black and dark green check pattern suit jacket. Single-breasted fastened with three buttons (2.4cm diameter) and two press studs. Buttonholes on a placket, of fabric cut diagonally. Classic collar. Top button at throat. Back of jacket made from four pieces. Front of jacket made of three pieces on each side to form shaping. Pockets inserted to seams at waist level on both sides of the jacket. Long sleeves tapering to wrist. Pure wool. Black and green, woven in a check design A-line skirt, with a long stitched down ''plackett'' effect of fabric cut diagonally, opening to a pleat, just left of centre front.Label inside back neck, ''Hanro tailored by franchise from Handschin and Ronus Ltd Switzerland. 100% wool. 18.costume, female, hanro pure wool jacket

Clothing. Women's long sleeved smock style blouse of black, grey and cream cotton patterned fabric. High round neckline with folded over collar with rounded corners (8 cm) edged with 2.5 cm frill of cream coloured lace. Vertical pin tucks across back and front from shoulder line (14 - 16 cms). Full length centre front opening placket fastened with five press-studs. Horizontal fabric band (9 cm) around hemline. Long straight sleeves gathered into one cm casing above wrist. End of sleeve trimmed with pin tucks and frill of 2.5 cm cream coloured lace.costume, female, women's long sleeved smock style blouse

Clothing. Blue linen dress, with a black and white floral design, possibly home stitched. V neckline at front, high rounded neckline at back. Curved yoke at front bodice. Centre opening, fastened with press-studs. Three decorative buttons are sewn diagonally, side by side on the outside of the opening (X2). Side fronts are gathered to the yoke, and have two darts on either side front, at the waistline. Short set in sleeves. Six panels form the A-line skirt. Some hand stitching on facings and hems. A home stitched dress. Two decorative, curved decorative panels, 5 cm wide and 22 cm long, straddle the waistline at front and back.costume, female, blue linen floral dress

Clothing. Long pointed sleeves, fastened with one press-stud at the wrist. Full circular skirt, lined with cream, synthetic lace type fabric. Fabric of the gown is a small floral type design,in a corded style, on a fine net backing. Sleeves are not lined. Back upper bodice has a lining in a double thread net. The sweetheart neckline is edged with a fine tulle frill. Bustline panels gathered top and bottom, and joins a peaked midriff panel, 15.5 cm deep at the centre bustline. Skirt is highly gathered to this panel, at the waistline, is a full circle and extends into a small train at the back. A small 23 cm zip on the left side seam.A KEAM Creation, Regd. Melbourne.costume, female ceremonial, ivory corded lace wedding gown

Two items of newborn clothing dating to 1944. The first item is a dress and the second is a singlet. Both items are made from wool and are in new, unused condition. The clothing was owned by Mrs L. Brawdrup and was donated to the National Wool Museum in 2022 by Lila Gore.Clothing item one is a cream woven dress. It is finished at the sleeves, neck, and hem with a white lace trim. The trim is formed from a thread that has a metallic gleam, presumably cotton. The dress is styled under the neck with a stitched patterned of frills and flowers in the same white metallic thread. The dress gathers under the armpits, similar in style to a dirndl. At the rear, the dress is loosened and fastened by 3 press stud buttons in an opening at the centre. Clothing item two is a cream woven singlet. It is finished at the sleeves, neck, and hem with a white lace trim. The trim is formed from a thread that has a metallic gleam, presumably cotton. The lace is like the dress; however, it is less intricate. baby clothing, 1940s, 1940s baby clothing

The Gunning family owned 20 acres of orchard and farm land in High Street Lower Templestowe and kept one of these kits in each vehicle and tractor. They didn't experience a snake problem until the late 1950's when land sub division around their property forced snakes into the area. The family lost one dog to snake bite in the early 1960's.Consists of a Wallet, tourniquet and lancet . 1.Wallet - small red plastic wallet with one press stud to close. Printed in gold on front: 'Sanax Snakebite Kit Sanax Pty Ltd Melbourne Australia 2.Tourniquet - rubber tourniquet looped through a metal clip used to tighten tourniquet. ' Sanax ' embossed on flat of metal clip. 3.Lancet - a three chambered cylindrical container made of red plastic. One end removes to reveal a lancet/ blade, the other end acts as a handle for the blade. Container holds instructions on a small roll of paper. The centre of the container can be be unscrewed to access crystals of permanganate of potash to put on the woundmedicine, first aid

Donated by grand daughter of Edith and Ron Palmer. Bride Ellen Lidgerwood married Ron Mathers on 4 September 1937.The Best Man was the brother of the Groom, George Mathers. The bridesmaid was the sister of the groom, Miss Mathers and the flower girl was the niece of the bride, June Lidgerwood. For full family history and photos of both weddings see Supplementary File NA3817 & NA3818. Dress worn by Ellen at her wedding and Veil worn by both sisters Edith and Ellen Lidgerwood at their wedding ceremonies, Edith in 1936 (see NA3817) and Ellen in 1937Prominent Box Hill families1937 cream seersucker dress featuring a cowl neck and long sleeve, slit at shoulder to create cowl effect. Slim at lower arm to a point over the hand and fastened at seam with press stud. Bodice cut on the cross under the bust. Cut on the cross figure fitting skirt to the floor, complete with long train. On the back is a slit opening fastened with hook and eye and glass clear buttons. Below the slit are eight glass buttons with false rouleau button loops. The train is made of an added detachable piece. Veil worn at both sisters weddings but with different headdresses. Headdress has small circle of flowers and berries. See sister's wedding dress NA3817.costume, female ceremonial

Mid-length shift dress in light grey-blue. Dress consists of two breast pockets, each with rounded flap closure held in place by two press studs. Dress is fastened down centre with three silver buttons held in place with a metal ring (only two buttons remain). From waist line down, dress is fastened by a hidden zipper and hook and eye. Waist line is pleated and carries two loops on the back, through which a fabric belt (0030.2) is threaded. Two fabric loops on each shoulder may have been used to hold epaulettes or similar. Dress sleeves are rolled up by 40 mm. Collar is notched. Interior label on left side at waist height reads "IYD CLO CO/VIC./8410-66-000-000/SIZE 18/ARMY NO........../NAME............"

Vol. 6, No. 4, Sep-Oct 2001 CONTENTS Vale Andy Ingham and Nina Christensen 2 What is this thing called jazz 3 Abdullah Ibrahim's musical journey Joy Hester The Goodlooker at Heide 8 A Sense of Place 10 Seren Little on the art of Peter Block Homecoming 12 Short Story by Sophie Avgoulis Banyule Young Artists Award 17 The winners for 2001 Australian Classical Music 20 Elizabeth Scarlett Celebration Quilts 2001 21 Gerry Smith Dumnoochin 22 History goes up in smoke by Mandy Haley Bundoora Homestead 23 From Horse Stud to Art Gallery Wildflowers of Victoria 25 Book Review by Gwen Ford CD Reviews 26 Cate Bailey, Andrew MacGregor, Judy Turner ARTIN' ABOUT 27 Wining & Dining 30 Poetry in motion 32 Sandy Jeffs plays tennis "Peter Dougherty has been involved in the local art scene for many years. As publisher and editor of the arts magazine Artstreams, his comments on the various branches of the arts are widely respected. His "The Arts" column in the Diamond Valley Leader presents a brief summary for a much wider cross section of the local community. Peter also operates his own gallery and the Artstreams Cafe at the St Andrews market. Peter has a wealth of knowledge about present day and historical aspects of local art and artists." - Eltham District Historical Society Newsletter No. 161, March 2005Colour front and back cover with feature articles and literary pieces with photographs and advertisements printed in black and white. 36 pages, 30 cm. Vol. 1, no. 1 (Nov. 1996) - Vol. 10, no. 5 (summer ed. 2005/​06) art streams, andy ingham, nina christesen, abdullah ibrahim, nillumbik art in public places award, banyule winter festival, joy hester, heide museum of modern art, seren little, sophie avgoulis, plenty views golf park, dynamic vegies, montsalvat, banyule young artists award, kyla jane hunt, perin roberts smith, jonathon woods, laura hassaram, lisa o'gorman, quilts, gerry smith, dunmoochin, mandy hayley, kinglake gallery, eltham wiregrass gallery, bundoora homestead, bulleen art & garden centre, melboune international chamber music competition, thompson's pharmacy

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0471 for another 1/8th inch hole.A number 5 stamped on the flat sideauger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0470 for another 1/8th inch hole.auger, hand drill, fencing, tool, rural trades, brace & bit

Margaret 'Catherine' McVeigh joined the Women's Royal Australian Air Force in 1951, aged 19, discharging at her own request on 10 July 1956. Margaret then joined the Victoria Police Force on 20 June 1956 and served in the Women Police Division. Following the application of the Equal Opportunity Act, Margaret moved to general police duties on 4 January 1979. She was then in charge of No. 3 Division "O" District (Mounted Branch, Police Dog Squad and the Police Horse Stud Farm). In 1973 Margaret won the Churchill Fellowship award and travelled overseas to study the integration of women into world police forces. She then joined the International Police Association and was issued this identification card. Margaret was the first female member of the Victoria Police to attain the rank of Chief Inspector and subsequently Superintendent and Chief Superintendent. In August 1988, at the time of her retirement, she was Chief Superintendent in Charge of the Traffic Operations Group.International Police Association identification card belonging to Police Woman Inspector Catherine Margaret McVeigh. Card has blue cover and is unsigned.mcveigh, catherine margaret, 12428, police women, international police association, police woman, policewomen, policewoman

“All Irusagi robes of office are highly symbolic. Generally black or dark blue, they are richly jewelled and embroidered; each one individually designed for its owner, as he, or she, takes office at the central court. The miniature is a record of this office. This, the Armourer’s Robe is typical of the richly decorated formal styles of the 10” to 12" Centuries Post Imperium. The symbolism is obvious: oversleeves of silver, to indicate one of the metals used in the making of weapons; decorative daggers, indicative of the famous throwing and fighting knives; studs, symbolising protective armour; and touches of red alongside the predominating metal, to represent the shedding of blood, (a minor theme, because bloodshed is undesirable). The Void, the centre of Irusaqu worship is always shown on this Robe, because all fighting men or women have a deep religious responsibility to obey the Voidic code. Lastly, the jewel, with its elongated triangle, forms the ancient symbol of Man, at the base of the Void, but not subordinate to it.” -Inga Hunter

The early settlers of Victoria depended on horse drawn vehicles to farm, make roads and railways, deliver produce and transport people. Horse harnesses were an important requisite for all drivers and could be found wherever there were working horses. Horse Harnesses have played an essential role in different cultures throughout history. Simple, utilitarian horse harnesses made of leather straps and iron rings were being used in early China before AD 500 as well as ancient Greece and Rome, allowing horses to pull chariots and ploughs. The Greeks and Romans were the first to use a "horse collar" which distributed the weight of the harness evenly across the horse's chest rather than relying on a "throat harness" that could damage a horse's throat or choke them. During the medieval period, European horse harnesses became more elaborate and decorative. Variations of different horse harnesses were also found in Native American and Middle Eastern cultures. Horse Harnesses usually have four basic components which include - 1. Communication - the bridle, bit and reins allows the driver to communicate instructions and commands to the horse, guiding its movement and direction. 2. Draft - the collar, hame straps, hames, traces and chains enables the horse to draw and pull the load efficiently by distributing the weight and transferring the pulling force to the vehicle. 3. Stopping - the breeching band, pole straps and breast strap helps to control or stabilise the horse and vehicle when moving downhill or stopping. 4. Support - the back pad, backband, belly band and back saddle keep the harness in the correct position and proper alignment. This show harness was used by Mr. Andy Bourke when showing his Clydesdales at shows or demonstrations. Although a more modern example with decorative embellishments, it still has many essential components traditionally found in an everyday working horse harness. The original purpose of the "housen" for example, was to run rain or drizzle off the horse's neck when they had to work in wet conditions - it was laid flat for this purpose on the top of the collar. Nowadays it is purely for show and is often used to advertise a business or stud. Horse brasses and fly terrets were fastened to various parts of a horse's harness. In the early days they probably began as amulets to ward off evil and to bring good luck and continued to be used as a festive decoration. The heyday of horse brasses was between the years 1851 and 1900. Horse brasses are fastened to various parts of the harness with many of their designs being symbolic. The ornamentation on this harness (although not authentic horse brasses) are based on the horse brasses that were popular in the 19th century. This horse harness is a significant example of the equipment that was needed wherever heavy horses were being used - particularly in the early years of Victoria's settlement by white settlers. Harnesses such as this example were used with stage coaches, drays, farming equipment, delivery carts and personal transportation.A leather and metal horse harness used when showing a Clydesdale (or other breed of heavy horse). It is made up of a number of components. 1. Decorative leather cart saddle with two large cloth pads underneath (which have a scalloped leather and stud border), a raised leather pommel and a silver and red coloured metal back strap holder across the top. It has two symmetrical sets of ornamentation (silver hearts and circles) in the front and a wide strap or girth (with a maker's stamp reading "R. Mitchell Saddler") and buckle which attaches the saddle to the horse. 2. Pair of steel hames which are gently curved (to fit on a horse collar) and are topped with steel knobs. They have several steel rings and lugs (to hold straps and chains) and a "Made in England Warranted Steel" stamp. 3. Breeching harness which consists of a number of leather straps, chains and metal rings including a wide padded leather strap with a scalloped edge that sits on the back of the horse and a thick leather strap that goes around the hind quarters of a horse which is joined to the back strap with four shorter vertical straps and buckles. These straps feature silver and red patent leather trim and silver heart shaped ornamentation. The strap also features the maker's stamp of "R. Mitchell". 4. Decorative leather bridle with blinkers featuring the same silver and red patent leather trim on the cheek piece, brow band and throatlatch. It has a stainless steel "Liverpool Driving Bit" with a curb chain, a variety of decorative silver ornaments (rosettes, diamonds plus a heart and two circles) on each end of the forehead band, dropper and strap as well as a silver metal bell (sometimes known as a "fly terret" or "swinger") that sits on the headpiece of the bridle. 5. Leather "violin shaped" dropper (or hanger) with two silver rosette shaped ornaments and a stainless steel clip on the top 6. Stainless steel "Liverpool Driving Bit" with a straight mouthpiece which is ribbed on one side. It has three rein spots (spaces) and a curb chain. 7. Leather arch shaped "Housen" covered in black and red patent leather and decorated with silver studs (some spelling out F H) and bordered with a red fringe. It has a leather strap at the back and two leather loops on the front. 8. Leather padded backband (Australian style "Stallion Draught Roller") decorated with two groups of nine metal "horse brasses" or harness ornaments displaying horseshoe, starburst and horse head designs on blue, red and white striped webbing. The backband has three notched straps at each end, a buckle near the centre and the initial B stamped in two places underneath. 9. Bellyband made of leather and red, white and blue striped webbing. It has a set of three buckles at each end (which correspond with the notched straps of the backband). 10. Wide, thick leather strap which has a buckle and notches at each end. It also has the maker's stamp of "R. Mitchell Saddler". 11.One pair of long leather traces - each with a buckle and notched loop at one end, decorated with a small silver diamond shaped harness ornament. 12. Length of stainless steel heavy duty chain with two swivel connectors.Saddle - "R.MITCHELL / SADDLER" Hames - "MADE IN ENGLAND / WARRANTED / STEEL" "MADE IN ENGLAND / WARRANTED / unclear" Breeching Straps - "R. MITCHELL / MAKER / R. MITCHELL MAKER" Housen - "F H" Backband "B / B' Wide leather strap - "R. MITCHELL / SADDLER"flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, harness, horse harness, show harness, clydesdale horses, andy bourke, horse drawn cart, housen, bridle, hames, breeching straps, dropper, bit, liverpool bit, backband, harness ornamentation, bellyband, back saddle, fly terret

1. & 2. DPCU (Disruptive Pattern Camouflage Uniform) Sewing kit plus an extra cover. Colours - light to dark green through to mid to dark brown. Cotton/Polyester fabric with metal press stud flap closer and black colour woven tape. Rectangular shape with two pockets - rolls up to store. 1. Contents of sewing kit, four reels of cotton/polyester thread, colours white, khaki, dark and lighter green, nine plastic buttons, four dark green, two light brown, three white. Two safety pins and one metal thimble. Eight silver metal sewing needles. 1. & 2. Manufacturers stamp inside top flap.Manufacturers information - black ink stamp. 1. "CLAYTONS/ NSW ^ 2007/ NSN 8315 66 134 9185/ Name/ Service No." 2. "SIRWAY 2011/ NSN 8315-66-184-9185/ NAME/ PM KEYS NO".accessory, army, sewing kit

Royal Australian Corps of Transport mess dress belonging to Kevin John Herdman. Part of the Kevin John Herdman No. 397661 Collection, See Catalogue No. 5942P for details of his service record..1) Black jacket with two button-down breast pockets and two side pockets with flaps. Jacket buttons at the neck and down the front. Unit insignia on right collar. White starched false collar attached with studs. All buttons bear a unit insignia and are gold coloured. Major's rank insignia on each epaulette. Manufacturer's label on inside left. .2) Pair of black trousers with two white stripes down the outside of each leg. Buttons on waist band for attaching braces. .3) White elastic adjustable braces. .4) Black peaked cap with red band. Gold coloured braiding on peak. Brown coloured sweat band and clear plastic lining..1) On manufacture's label: 'DAVID KLEIN PTY LTD, PTY LTD, VICTORIA, 1966, (upwards arrow)'. On false collar: 'C.G.C.F., SIZE 15'. .2) On manufacturer's label: 'DAVID KLEIN PTY LTD, PTY LTD, VICTORIA, 1966, (upwards arrow)'. .3) Stamped on leather joiner: 'P-F, 10 73, (upwards arrow), 44'. .4) Inside cap: 'COMMONWEALTH GOVERNMENT CLOTHING FACTORIES, MELBOURNE,6 3/4'.uniform, mess dress, royal australian corps of transport, kevin john herdman

This case may have once attached to the belt of a soldier as a carry case for an artillery sight.Dark leather case constructed of two elongated semi-circle shapes, hand or machine stitched with a gusset. Edges trimmed in leather binding and rectangular lid held in place on one side by stitched leather hinge and fastened with metal buckle on other side. Reverse of the case has a leather loop held in place with stitching and 6 metal studs or rivets; a metal rectangular loop is stitched in place with fine wire twisted and attached to loop. Interior of case appears to be felted wool or fibre, cream in colour with small leather loop on right side, perhaps to hold a small accessory. Front of case is stamped with manufacturer's name; lid has remnants of a circular adhesive label.Manufacturer's stamp reads "FRANZ COBAL/BERLIN/1916"carry case, bag, accessory, acoutrement, world war one, military, uniform, world war i, first world war, the great war, germany, german, berlin, franz cobal, franz cobalt, artillery sight

Light brown infant's velvet dress. Yoke at front and back with high round neckline. Neckline trimmed with four X cm coffee coloured lace, threaded with dark brown velvet ribbon. Back opening on yoke section fastened with two press-studs. Short set in sleeves trimmed at hem with two cm coffee coloured lace. A line skirt gathered onto yoke front and back. Skirt trimmed above the hem with four cm wide coffee coloured lace threaded with dark brown velvet ribbon tied in a bow at centre front. Inside hem edged with tan coloured bias binding. Neckline also edged with bias binding.costume, children's, light brwon infant's velvet dress

Green long sleeved ladies top. Leaf green fabric with abstract patterns in grey, black, blue, yellow and orange.4 cm stand up collar. Front slit opening from throat with narrow hand stitched hem. Three 1 cm decorative metallic look shank buttons at lower end of slit. Top made from two pieces-falling straight to hipline. No shaping. On either side of side seams at hip level are three decorative metallic look shank buttons on the front and three corresponding loops on the back. If fastened together the top is pulled in and tightened at the hip level. Long sleeves are straight without shaping. Press studs at centre of openings at wrist.costume, female, ladies long sleeved top

Cream linen, round neckline, finished with two cm wide scallops embroidered at the neckline edge in buttonhole stitch. A small embroidered eyelet at the centre of each scallop, allows a narrow pink silk ribbon to pass through as a drawstring. The centre front opening, 17cm long, fastens with on metal press-stud, and one pearl button, with handstitched button hole-one cm long. Garment has no shoulder seams, and does have extended, short sleeves, finished with embroidered scallops, as the neckline. Five petal shaped cutwork decorations are on each sleeve, and both sides of front placket.Garment is slightly flared at the hemline. French side seams - machined and machine stitched hem.costume, children's, cream linen child's nightgown

The dress was worn by Gladys May Moutray when she married Alan Tieman at St. John’s Anglican church Port Fairy in 1941.Home made wedding dress with attached train and lining/petticoat. Cream crepe over sewn in rayon lining. Material covered buttons x 7 with fabric loops on each wrist of long sleeves. Hook and eye (hand sewn) at back of neck closure and side closures of lining and dress. Velveteen ruffles around edge of train. Velveteen flower accent at front and back waist with Cornelli embroidery. Shirring at top of shoulders. Press studs at wrist closure. Dress L 134cm, W shoulders (flat) 32 cm, hem (flat) 80 cm. Attached train, L 134cm, W 164 cm. Sleeves, L (inside arm) 46 cm.female costume dress, wedding, gladys may tieman, alan tieman, gladys may moutray

A comprehensive containing many rare and removable facsimile documents of historical importance, Includes rare photographs, images and insignia from the collection of the Australian War Memorial.One book of many in relation to the Vietnam War.Hardback book in box; Authors: Gerry and Janet SouterThe Five Mile Press Pty Ltd/950 Stud Road, Rowvville Victoria 3078 Australia/Email: [email protected]/Website: www.fivemile.com.au/This book is sold subject to the condition that it shall not, by way of trade or otherwise, be lent, resold, hired out or otherwise circulated without the publisher's prior written consent in any form of cover or binding other than that in which it is published and without a similar condition including this condition, being imposed on the subsequent purchaser./Printed in China 5 4 3 2 1 vietnam, vietnam war, diamond valley vietnam veterans sub branch, books

Clothing. Cream coloured lace silk wedding dress. Dress made from fine silk fabric with self stripe, fully lined with cream coloured linen. High round neckline with stand up lace collar(6cm). Bodice at front has crossover from shoulder to waist, forming deep Vshape at centre front with net insert below the collar. Net insert has vertical pin tucks. Bodice front and back has cream coloured lace overlay that extends over the shoulders to halfway down the 3/4 length sleeves. Hem of sleeves trimmed with embroidered lace with geometric pattern. Cummer bund of pleated silk fabric (7cm) is attached around waistband. Floor length skirt is gathered into the waistband.Front of skirt has straight lace panelsoverlay (37cmX 90 cm) including 20 cm flounce at lower edge, attached at waistline. Back of skirt has gathered lace overlay attached at waistline extending across side seams and over the edge of front lace panel. Centre back opening fastened with eighteen metal hooks and eyes from collar to waist and six metal press-studs below the waist. Cummerbund fastened with three metal hooks and eyes. A fabric insert at centre back fastened with press-studs. Collar has five pieces of stiffening plastic. Bodice has three bone casings across front above waistline, and four across the back. Cotton tape band (66 cm X 3cm) attached inside bodice at front with hook and eye fasteing.Printed on inside waistband, ''AMALIA SALXANO FARRONE'' NAPOLI ''MODE +CON----'' VIA EGIZIACA A PIZZO FALCONE 93''. Printed inside LHS sleeve at arm pit ''SAXONIA 48X''.costume, female, cream coloured wedding dress

From the early 1960s, the Forests Commission had pre-season arrangements in place with local aeroclubs and pilots across regional Victoria. Air observers from FCV districts routinely flew during the summer months in small, fixed-wing aircraft on fire spotting missions and to map fire boundaries. The information was often needed quickly by crews on the ground or in the control centre and these small chutes were used to drop messages and maps from the reconnaissance aircraft on a low pass above a cleared area like a football field. About 3-foot long when fully extended, they had a small pouch secured with a press stud for the map or package. The chutes were made from tough canvas with a small, weighted sandbag at one end and a long yellow streamer tail on the other to help direct its fall and locating it on the ground. Drop chutes were still in common use in the 1990s, but the increased availability of helicopters combined with improved digital data transfer made drop chutes redundant. Simple, but now redundant technologyAerial drop chute"Return to Forests Comm Vic" stenciled on sidebushfire

Clothing. Child's ivory coloured silk yoked dress. Round neckline edged with lace. Front yoke is made up of two horizontal strips of lace with a vertical strip on either side at the shoulders. The back yoke of fabric has vertical strips on each side at shoulders. Kimono style short sleeves have a strip of lace along the top. The hem of the sleeve is trimmed with ribbon insert lace and edged with one cm scalloped lace. The skirt is gathered into the lower edge of the yoke, and the seam is trimmed with ribbon insert lace.The sleeve is made up of 7 cm of silk fabric with 20cm of Lace fabric with scalloped edge at hem. Centre back opening (19cm) with three metal press-studs on the yoke.costume, children's, child's ivory coloured silk yoked dress

Frederick Charles “Fred” Griffith was born in Albury, NSW on 2 March 1910. Educated in Albury and Geelong Grammar. Beginning in 1927 he spent many years working first as a jackeroo and on a range of prominent pastoral and merino stud properties in NSW and Queensland. In 1935 he repurchased his former family property “Toonallook", Bowna, NSW and developed it to be the largest Romney Marsh stud in the world, exporting rams to Argentina. He introduced many innovative practices on his property including rabbit control measures and aerial crop dusting. He was an active member of the Albury Show Society and in 1949 established the Albury Sheep Show. Fred was also the Albury representative on the Graziers’ Association Council for over 30 years. He became a life member of both the Albury and Commercial Clubs. Fred’s greatest hobby was snow skiing. His first visit to the snow was to Kosciusko in 1919. The Albury Ski Club was formed in 1935 and Fred was an inaugural member. In 1949 they were granted a site at Falls Creek to build their own lodge. Fred guaranteed the Club for finance from the Bank of NSW. The first portion of the prefabricated building was constructed in Albury. It was transported to Falls Creek on the back of Fred’s truck and erected in one day. This was the bathroom section and the rest was completed in 1950. The original lodge was burned down in 1952 and a new one built the following year. In 1955, Fred also built the Bowna Lodge for his family in partnership with David Fairbairn. He became head of the North Eastern District Skiing Association (N.E.D.S.A.) and successfully applied to run the Australian Ski Championships. Fred also inaugurated children’s races at Falls Creek and ran them for about 20 years. He also formed the company “Falls Creek Ski Tows”. In 1956 Fred along with a group of key people selected the site for Thredbo Village. Fred and his brother sold Toonallook in sections between 1951 and 1974. He moved to Albury and set up as a landscape gardener and fencing contractor. After a serious work accident, Fred retired in 1985 and moved to Rosebud, Victoria where he died on 19 August 1992. Bowna is now known as the Riverina Ski Club.This image depicts Fred Griffith who was a pioneer of the Albury Ski Club and Falls CreekA black and white photo showing Fred Griffith on left of image looking towards Whitehaven lodge fred griffith, albury ski club, falls creek, bowna ski club

postcards feature images taken by Frederick Charles Griffith. “Fred” Griffith was born in Albury, NSW on 2 March 1910. Educated in Albury and Geelong Grammar. Beginning in 1927 he spent many years working first as a jackeroo and on a range of prominent pastoral and merino stud properties in NSW and Queensland. In 1935 he repurchased his former family property “Toonallook", Bowna, NSW and developed it to be the largest Romney Marsh stud in the world, exporting rams to Argentina. He introduced many innovative practices on his property including rabbit control measures and aerial crop dusting. He was an active member of the Albury Show Society and in 1949 established the Albury Sheep Show. Fred was also the Albury representative on the Graziers’ Association Council for over 30 years. He became a life member of both the Albury and Commercial Clubs. Fred’s greatest hobby was snow skiing. His first visit to the snow was to Kosciusko in 1919. The Albury Ski Club was formed in 1935 and Fred was an inaugural member. In 1949 they were granted a site at Falls Creek to build their own lodge. Fred guaranteed the Club for finance from the Bank of NSW. The first portion of the prefabricated building was constructed in Albury. It was transported to Falls Creek on the back of Fred’s truck and erected in one day. This was the bathroom section and the rest was completed in 1950. The original lodge was burned down in 1952 and a new one built the following year. In 1955, Fred also built the Bowna Lodge for his family in partnership with David Fairbairn. He became head of the North Eastern District Skiing Association (N.E.D.S.A.) and successfully applied to run the Australian Ski Championships. Fred also inaugurated children’s races at Falls Creek and ran them for about 20 years. He also formed the company “Falls Creek Ski Tows”. In 1956 Fred along with a group of key people selected the site for Thredbo Village. Fred and his brother sold Toonallook in sections between 1951 and 1974. He moved to Albury and set up as a landscape gardener and fencing contractor. After a serious work accident, Fred retired in 1985 and moved to Rosebud, Victoria where he died on 19 August 1992.These postcards document how Falls Creek was portrayed to the wider community.A set of postcards showing aerial views of Falls Creek as well as groups of skiers on the slopes, On Back of each card: POSTCARD CORRESPONDENCE / ADDRESS ONLY In a square for stamp Placement - KODAKfred griffith, albury ski club, falls creek, bowna ski club