Yering Station which was first settled by Paul De Castella of Neuchatel, Switzerland. De Castella was a pioneer of Australia's wine industry. The brick building was constructed of handmade bricks around 1859 by Paul De Castella to process grapes grown at Yering Station. De Castella used advanced winemaking equipment imported from Bordeaux, France. Yering Station wines were successful at the World Exhibition in Paris (1889) when it received the only 'Grand Prix' in the Southern Hemisphere. yering, wine, winery, de castella, paul de castella, yering station, neauchatel

Octagonal varnished wood font with a fitted lid. The lid has a large brass knob on the top secured by three screws and the front a small brass plate on one side. Each of the other seven sides have carved two carved leaves. The font is on one single turned wood leg which sits on an octagonal base. The inside of the font contains a copper bowl. There is a support for the bowl which must be a later handmade addition to the font as it is made of plywood. The manufacturers name is on the inside of the lid."TO ST ANDREW'S PRESBYTERIAN CHURCH FRAMLINGHAM BY THE LADIES GUILD 18TH APRIL 1954"st andrew's presbyterian church framlingham

This outfit was sent home to A.E. Tranter's daughter Brenda Refer to Cat 7944. Item in the collection of "Arthur E. Tranter". V50166 - VX52843 2/29th BN P.O.W.1. Top - dark red colour cotton satin fabric with light gold cover piping to garment edges. Handmade. Top has a mandarin collar, side to front opening and no sleeves. Knots and loops are used to close garment. Decorative ribbon fabric flowers at collar and neckline. Colours - pale pink, dark pink and yellow. Garment has been hand and machine stitched. 2. Pants - fabric as above. long wide legs to pants. Hand and machine stitched. clothing, ww2, arthur e tranter

The historic Victorian ‘couta boat “Viator” was built by renowned boat builder J.R. Jones of Williamstown in Melbourne, between 1890 and 1920. He was one of the early builders of this design. The features of Viator - carvel planked, open cockpit, vertical stem and straight keel, single mast and a pivoting centreboard - are all characteristics of an early Bass Strait ‘couta boat. This has been confirmed by experienced Victorian ‘couta boat restorer Tim Phillips. Viator served as a ‘couta fishing boat in the Warrnambool area until the mid-1930s, then some say she served as a mail ferry across to Portland. Later it was used as a fishing and recreation boat for local families. For years Viator sat in a paddock in East Warrnambool until purchased in 1975 and donated to Flagstaff Hill. ‘COUTA BOATS - The ‘couta design for vessels is believed to have originated at Port Phillip, Victoria, for the purpose of the Barracouta (‘couta) fishing industry, being both fast and seaworthy. , The 'couta fish was an important food fish in Australian waters, supplying Melbourne with plenty of inexpensive fish. VIATORY’S OWNERS - Some of Viator’s history is known: - 1940, registered Port Fairy and owned by G.J. Richards. - 1941-1945, registered in Port Fairy and owned by Jens “Peter” Petersen. - 1950’s “Brusher” Richards of Warrnambool and Port Fairy used it for fishing. - Peter Watson and his son also went fishing in Viator. - Frank Ferrier, boat builder, was an owner (son of ‘La Bella’ hero, William Ferrier) - Arthur Rogers owned Viator too, then sold it to Terry Pridmore and Wayne Moorefield - The Viator was stored in a paddock, unused, in Fairmont Avenue, Warrnambool, where it was gradually deteriorating. - 1975 Viator was purchase at a very reasonable price from Pridmore, then donated to Flagstaff Hill Maritime Village. RESTORATION - Shipwright Erik Mikkelsen soon started restoration on the Viator after it arrived at Flagstaff Hill in 1975. In 2006 the Maritime Museums of Australia awarded a grant to Flagstaff Hill Maritime Village to assist with the restoration and renovation of the Viator. Its restoration continues today in the care of Flagstaff Hill’s boat builder. J R. JONES - boat builder The photograph of the EVA MYRL shows the builder J R Jones with his team of workers. The other photograph shows a vessel built by J R Jones' son, J B Jones of Footscray, and his team of boat boulders. The photograph of the EVA MYRL was taken by E. A. Dond---. The other photograph is of the Sturrock Coot, taken a Albert Park Lake in St Kilda.The Viator is the most significant boat in the Flagstaff Hill's fleet, being the last remaining local 'couta boat and one of few existing examples of this craft. Viator received Heritage status with the Australian Maritime Museums Council and is listed on the Australian Register of Historical Vessels in 2006 (ARHV Number: HV000561). Viator was built in Victoria in the early days by renowned boat builder J.R. Jones, and sailed by fishermen for many years, both local and on the coastal waters of Victoria, and was possibly used for the mail service. It is significant for being used for the fishing trade, for government service, perhaps as a mail boat, and for recreation by local families.Vessel, the ‘Viator’, an historic Victorian ‘couta boat, handmade by renowned boat builder This J.R. Jones 'couta boat, the Viator, was built in Williamstown, c.1890-1920. The single mast vessel has a Caravel hull built from New Zealand Kauri, blackwood, with a red gum keel and a jarrah stem and stern. It has a pivoting centreboard. Two photographs are included; one of the builder with his team, the other is of his son J B Jones, with his team. Marked "Viator" Photograph 1759.2: "E. A. Dond---" (indecipherable". Handwritten on back "Grandfather / J R Jones / Built" Photograph 1759.3; sign within photograph "J B JONES / BUILDER / FOOTSCRAY", stamped in the card, bottom right " ----- / MELBOURNE" and handwritten on the back "I think this is Mr Abel Sturrock Coot Albert Park Lake"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, arhv hv000561, arthur rogers, bass strait ‘couta boat, “brusher” richards of warrnambool and port fairy, clinker hull boat, ‘couta crafted boat c 1890-1905, ‘couta fishing boat, erik mikkelsen shipwright, g.j. richards of port fairy, jens “peter” petersen, john lindsay, old mail boat, pivoting centerboard boat, peter watson, single-masted ketch, terry prodmore and wayne moorefield, vessel viator, viator a historical vessel, victorian ‘couta boat, victorian barracoota boat, warrnambool ‘couta boat, western victoria fishing boat, western victoria mail boat, hv000561, australian register of historical vessels, erik mikkelsen, j b jones, j b jones boat builder, footscray, sturrock coot, sturrock, j r jones, j r jones boat builder, williamstown, eva myrl

Erstine Schlisweg married William Bosse in Germany in 1860, later settled in Nhill districtSettlers in Nhillc 1860 Three piece silk & lace wedding ensemble handmade in Germany, consisting of a silk full length skirt with lace & ribbon trim which hugs the waist, flows into a small train at the back; the high round neck, sleeveless bodice/top tucks into the skirt, is silk with pleats down either side of a lace panel in front; cape is silk, slightly gathered so it elegantly flows over the shoulders, finishing below the hips, is trimmed with lace around the neck and bottom. Lace & ribbon trims wedding dress, william bosse, erstine schlisweg, nhill, german - textiles - handmade

The silk card were created by French women during the First World War. The women would create these in there homes as a way to earn an income during the tuff times. The silk mesh was embroidered by the women and was later sent to factories to be placed on the cards. According to the Australian war memorial website there were 10 million of the cards made between 1914-1919. This card in particular was sent from John (Jack) McIntyre to his mother for her birthday. J. McIntyre served in the first world war, first arrived in Egypt in 1915, then to the Western front in France in July 1916. He was servery injured during his time in France and was sent to the Hospital in England. After the war finished Jack travelled back to Australia and lived in Lara with his brother and sister.This card is significant as it is a reflection on the communication between families during the First World War. It also is a symbol of the way women in France made their money during the tuff timesA birthday card with silk on the front of the card. It has pink flowers stitched into the silk and says 'happy birthday'On the front it has 'Happy Birthday" "Remembrance" On the first page in the inside "Remembrance" "To mother" "From Jack" "France 1918" On the second page in the inside: "Wishes are nothing; t'is the heart That in the few lines dwells And says to those from us apart More that the greeting tells" birthday card, mother, son, mcintyre, world war 1, ww1, happy birthday, handmade, silk, embroidered

Belltower Pottery was set up by Rudolf Dybka in Kyabram, Victoria, in around 1977 with the help of John Stroomer. Stroomer later took over the pottery, employing as many as 23 workers and apprentices. After a fire in 1988 destroyed the building, Stroomer moved the pottery to the old Kyabram butter factory, where it operated until the late 1990s. Works may be marked with an impressed 'Belltower Pottery' or, after the move to Kyabram, 'Belltower Pottery, Handmade, Kyabram, Vic.'Wheel thrown stoneware bowl with the word 'Nuts' on one side. pottery, belltower pottery, rudolf dybka, john stroomer

The Kew Historical Society’s fashion and design collection is comprised of costumes, hats, shoes and personal accessories. Many of these items were purchased or handmade in Victoria; some locally in Kew. The extensive hat collection comprises items dating from the 1860s to the 1970s. Most of the hats in the collection were created by milliners for women. There are however a number of early and important men’s hats in the collection. The headwear collection is particularly significant in that it includes the work of notable Australian and international milliners.Faux wool woman’s hat made of 'polyacryl' and 'thermoplastisch' in shades of blue and yellow. While the hat is based on the shape of a fedora the design is softened by the varying shades of colour in the weave.Label: 70% Polyacryl 30% Thermoplastisch, Made in Italywomen's clothing -- hats, fedoras

The Kew Historical Society’s fashion and design collection is comprised of costumes, hats, shoes and personal accessories. Many of these items were purchased or handmade in Victoria; some locally in Kew. The extensive hat collection comprises items dating from the 1860s to the 1970s. Most of the hats in the collection were created by milliners for women. There are however a number of early and important men’s hats in the collection. The headwear collection is particularly significant in that it includes the work of notable Australian and international milliners.The hat was owned and worn by Lilian Cohen.The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s. 1920s navy blue felt cloche hat. The irregular border of the cloche is highlighted by a ruched band of emerald green velvet. The hat is part of the McIntyre Collection.Nilhats, australian fashion - millinery, fashion accessories, mcintyre collection, lilian cohen

This metal tin once contained sewing silk thread, and was later used for storing 'B' hinges used in the making of the ship model, Sovereign of the Seas. Natural silk thread used in the model has elasticity and can also be teased out for making fine line for rigging on ship models. This object is one of the tools and accessories used by Jim Williams from about 1930-1955 to hand craft the ship model “HMS Sovereign of the Seas”. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This tailor’s silk container, and its later used as storage for hinges, was used in the hobby and skill of ship model making that has been carried as a leisure activity out for generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This tin was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Tin, round, with lid. Red label reads “The "A.B.C" Brand Tailors Sewing Silk (Raven) Color Fast. Dyed by a new process. Manufactured from the best raw silks procurable. Warranted. Made in England. Size No. 1/4 LB” .The container has no contents. This tin is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. “The "A.B.C" Brand Tailors Sewing Silk (Raven) Color Fast. Dyed by a new process. Manufactured from the best raw silks procurable. Warranted. Made in England. Size No. 1/4 LB”, Logo on lid is the intertwined letters of “A.B.C.”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model tools, ship model making, ship model making accessories, "a.b.c" brand tailors sewing silk, b hinges, textile, silk thread, sewing silk, shipwreck coast, ship model, hobby, ship model tool, english war ship

Object. Brass coloured medal with a suspension piece and suspension ring on the crest. Obverse: Bendigo Town Hall, Below picture, ''J. B. EDWARDS''. Reverse: Around edge, ''Bendigo Juvenile & Industrial Exhibition 1886'', Engraved in centre ''FIRST AWARD MISS ELY HANDMADE SHIRT''. The Bendigo Juvenile and Industrial Exhibition was held in 1886. It was opened by the Governor. The exhibition was organized to encourage young people to engage in useful activities. The Picture Gallery had over 700 entries and impetus for the establishment of the Bendigo Art Gallery.numismatics, medals - civil, first award medal

'Skin, Surfaces and Shadows' was created by Tommaso Durante in 2004 during his stay in Bundanon (gifted to the Australian people by Arthur & Yvonne Boyd - South East Australia) as international artist in residence and it was enriched during the artist’s stay in Broome (Western Australia) in 2005. On that occasion he collected the raw materials that were subsequently wrought to develop the actual bookwork.On the edge of artistic practice and philosophical inspiration, 'Skin, Surfaces and Shadows' pushes the boundaries of art, craft and design by combining digital technologies with traditional techniques and materials. Durante visually explores the surfaces of organic things (trees, surface textures, etc.) and the figurative dividing line of the shadow. The poet Wallace-Crabbe responds to these images in words. The poet and the artist flit in and out of shadows, skin and the surfaces of paper and life.(a) prints, artist's book (80 pages), ink; Somerset Book White paper (175gsm), digital images, printed in eight inkjet colour pigments, from digital files. Set in digital typefaces Utopia STD Display, Italic and Bold, Frutiger 57 Condensed, 67 Bold Condensed, and 56 Italic. Section sewn around 3 tapes. Full paper binding with blind blocking on front cover handmade head and tail bands. (b) CD of slide presentation to accompany bookwork on display Primary Insc: In black biro, signed and editioned by Tommaso Durante and Chris Wallace-Crabbe (last page '8/25 T DURANTE CWallace-Crabbe')prints, artist book, skin, surface, shadow, poetry, durante, wallace-crabbe

Demonstrates and yields information about the considerations made for Weekly Tickets during the late 1920's.Set of handmade or hand written sheets regarding weekly tickets in Ballarat - using ink and pencil .1 - Lined foolscap sheet dated 3-10-26, titled "Notes on Weekly tickets", regarding availability, point of sale, sections, availability, midday or lunch time usage, numbering, use of tokens, fare boxes, disadvantages, and possible layout sketches. .2 - ditto, pencil notes, about ticket revenues, overlapping sections, limit of times, holidays. See also Reg Item 8019 for a 1921 and 1928 documents. trams, tramways, tickets, esco, weekly tickets

Used by ESCo to enable identification of depot employees when travelling on the trams. Date made and when used unknown. Has hammer marks on rear of badge. See item 9038 for another example.Demonstrates a employee's free pass for travelling on Ballarat's trams.Handmade metal badge from brass sheet about 52 in diameter with a slot (long oval shape) about 23 long x 5 deep through which a leather strap about 100 long x 10 wide with a steel buckle is fitted. Stamped in capital letters on the badge are "BALLARAT TRAMWAYS" on the outside, "EMPLOYEES DEPOT PASS", in the centre of the badge, with the word "Employees" in a semi-circle. Near the bottom of the badge is the number "12", the one formed using an "I". The letters have been filled with a white paint.tramways, trams, esco, depot, employees pass, badges

These photographs appear to have been used for lantern slidesHandmade photograph album made from cardboard tied together with cord. Large black and white photographs pasted in. "Lantern Slide," or "Slide," handwritten beside each photograph. Also see B10.0021. (1)6 female students working in the flower garden with a member of staff. (2) View of the Lily Ponds with the Principal's Residence in the background. (3) The Croquet lawn. (4) Side of the Principal's Residence looking towards the Pavilion in the background. (5) Path to the Principal's Residence with the roof of it in the background. (6) Blossom tree. Also see Bfemale students, flower gardens, staff, lily ponds, principal's residence, croquet lawn, pavilion, blossom trees, lantern slides, students working outside

These handmade skittles in this set appear to have had a lot of use as the surfaces of the skittles are well worn. The skittles have a hole in the top, indicating that they were made on a wood lathe. The game of skittles is played indoors and outdoors. It is a traditional target game or sport and the forerunner of the sport of bowling. A standard skittle set has nine skittles and one or two balls. The skittles would be arranged in a diagonal square pattern and a ball would be bowled towards them, for a given distance away. The object is to knock down as many skittles as possible. These skittles are representative of the traditional games played by children and adults over the centuries.Set of four wooden skittles, cylindrical body tapering inwards to form a narrow keck with a knob on top. Knob has two flat surfaces. The bodies and knob tops of the skittles sow remnants of wood stain but the bodies' surfaces are worn. The tops have a scored line around their circumference. The bases are rounded, with the edges off the floor. The top and base of the skittles have a hole in the centre. flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, skittles, pins, game, children's game, traditional game, bowling, toy

The Fashion, Textiles & Design Collection includes a number of examples of household or domestic textiles dating from the Nineteenth and Twentieth centuries. Some had a purely functional role while others were essentially decorative. These textiles were mass-produced or handmade, and sometimes including elements of both. Many were constructed of, or include elements of, lacework, tatting, embroidery or crochet. Donated throughout the Society’s history by members or residents of Kew, the provenance of many items is now unknown, however they remain in the Collection to illustrate the social history of the Australian home.White crocheted doily incorporating the motto of the Australian Natives Association and a pictorial representation of an emblem that would become the Commonwealth Coat of Arms.doilies - patriotic, doilies - symbolic, soft furnishings, australian natives association, advance australia

Made by a German prisoner of war at Camp 13Hexagon shaped paper mache bowl. White outside, dark green inside, painted on the outside are navy blue and orange flowers, navy and green stemsbowl, paper mache, anderson h, camp 13, murchison, tatura, camps, handmade, papier, mache, helga anderson

This wooden spokeshave was used in the making of ship model Sovereign of the Seas. It would have been used to shave and shape wood in a similar way that a plane would be used. Its name comes from its use for shaping curved objects such as wheel spokes, oars, paddles, chair legs and bows. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker.This spokeshave is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This spokeshave was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Spokeshave; two-handled, medium coloured wood tool, slightly curved centre. The front has two blade screws protruding from it, the back has a flat ‘sole’ with removable brass blade attached by screws. This spokeshave is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. (Illegible text is pressed into the top side of the spoke shave.)flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, spokeshave, spoke shave, sovereign of the sea, ship model, hobby, ship model tool, english war ship

This fine Reeves paint brush was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. REEVES - Reeves & Sons Ltd, makers of fine art supplies, operated under this name in London, England, 1891-1976. The company was founded as Thomas Reeves and Son in 1784. SOVEREIGN OF THE SEAS - Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This brush is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This brush was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Paint brush, narrow ‘0’ size, Reeves brand, no. 157, made in England. Inscription printed in silver paint. This paint brush is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. Printed on handle -“MADE IN / ENGLAND” , “REEVES”, “157”, “0”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, paint brush, reeves of england, sovereign of the sea, ship model, hobby, ship model tool, brush

There is evidence of the game of marbles in the ruins of Pompeii and the tombs of Egyptians as well as early American Indians. The earliest marbles were simply rounded stones which had been polished but this was refined to handmade versions made of clay, stone and glass. It was in the late 19th century that mass production began and it gives testament to the popularity of the game that the Dyke factory of Ohio could produce 1,000,000 marbles a day. It was around 1915 that the mass production of glass marbles began. The game reached the height of popularity in the 1920-1930’s. Many were prized for their designs.The game of marbles was one of the most common games played universally, from childhood hence has a strong link with people of all ages and cultures. Five marbles in glass jar. All are various sizes ranging from large yellow streaked with red and blue, black striped with white, marbled tan, clear with multi coloured streaks and bright blue. Shapes are roughly spherical. Materials range from glass to glazed and stone. Three have pontil marks either on end.The lid of the jar has Nestle vacuumed sealed for extra protection. Use special key to open. Old sticker on base with 173 written in black lead pencil. toys, marbles, children's games, warrnambool, handmade marbles, glass marbles, clay marbles, agate marbles

The Wied family were settled in Palestine upon the beginning of WWII. Being of German nationality, they were considered a threat to security by Allied forces & were interned in temporary camps, before being shipped to Australia. In Australia they were interned in Camp 3, Tatura, a family camp for enemy nationals. Many of the internees came with few possessions. This item is just one of the handmade domestic items fashioned in the camp from largely scrap materials to give some home comforts in the initially barren surroundings of the camps, particularly to those interned with families and young children. Butterfly shaped brooch made from Paua shell. Fixed to a brass safety pin. world war ii, camp 3, palestine, tatura, jewellery, internment camps

The loom was made by John Charles Mann in the late 1920s-early 1930s for Lilian Joyce Mann. Mr Mann enjoyed woodwork. He died in 1945. Ms Mann was very interested in crafts and owned a shop in Jacob Street which sold handmade soft toys and items woven from the loom, for example table mats. The shop was later bought out by Henry Jacobs and later became Myer. Ms Mann died on the 17th July 2007. Ms Mann was a founding and life member of the Geelong Handweavers and Spinners Guild.W7219 (Mann loom) Lilian Joyce Mann's loom in house Lilian Joyce Mann's loom in houseOxy & Electric Welding Motor & Gehandicrafts, geelong handweavers and spinners guild inc., weaving looms, weaving, mann, mr john charles mann, ms lilian joyce, geelong, victoria

Dress worn by Mary (Molly) Sprunt on marriage to John (Jack) Leith on 12 March 1938 at St Andrews Presbyterian Church, Rushworth. Veil was handmade by mother Madge Brydon in 1912 for her wedding. Dress and veil donated by Molly's daughter. Dress also worn by sister - Lyndsay (Lyn) Sprunt for her marriage to George Hendrie on 10 November 1945 at St John's Church Elsternwick. Gown made by Molly and Lyn's aunt Edith Brydon. Veil (NA3495) worn was made by mother Madge Brydon. Donated by Molly's daughter.Cream damask 1938 satin dress. Long sleeves, cross over neckline to a diamond front panel. Skirt cut on the cross, with front pleat. Back skirt has long train. Self-covered buttons at centre back.|See also NA3495 - Veil. Also worn for 1945 wedding with veil. NA3496 - Shawl.costume, female ceremonial

Thomas Burch Ford (1818-1892) began producing blotting paper and filter papers for personal and industrial use, after taking over Slade's Original Handmade Blotting Company in 1881. John Letts produced the first commercially available diary in 1812. In 1835 the business was taken over by his son Thomas and grandson Charles John joined the company in 1870. In 1881, after a brief hiatus, Charles restarted the business as Charles Letts and Company, the name it retains today. The blotters were included in the diaries as a form of advertising both for Letts and for TB Ford.A Collection of Ford's Blotting Paper: Orange(1), blue(1), green(2), light green(1) yellow(1), light pink(1) and pink(1) coloured blotting paper with blue print. Advertising * Charles Letts's Diary Blotter. An Alliance of Quality Comfort and Economy. Fords Gold medal absorbent Blotting. Ford 428 Mill Made in 22 Colours and white. The very best obtainable Ford's Gold Medal Absorbent Blotting. Box 625T.B. Ford, Ltd. Snakeley Mill, Loudwater, High Wycombe, London Showroom 72 Piccadilly, W.1. Ch.L. - 2- F8064ephemera, mementoes, blotting paper

A gift to Ron Cochrane, a member of the Navy commissioning team of HMAS Voyager. The box was handmade by two brothers CLARK/E (?) from Benalla. The signatures done in ball point pen belonged to the crew attached to the portside Forward Mess. They presented the box to Cochrane who was responsible for the Mess as a token of appreciation. Ron Cochrane R46195 served as a Leading Hand with the Royal Australian Navy between 1951 and 1957 and served on numerous ships including HMAS Voyager between 6/2 - 6/10/1957. He was born on 20/3/1933 at Ballarat East. Daring class destroyer, Voyager, was the first ship of her class to enter Australian service, and the first all-welded ship to be built in Australia. During the night of 10 February 1964, Voyager and the aircraft carrier HMAS Melbourne collided off Jervis Bay, when the destroyer passed in front of the carrier during post-refit sea trials. Voyager was cut in two by the collision, sinking with the loss of 82 of the 314 people aboard. This was the largest loss of Australian military personnel in peacetime, and the subsequent investigations resulted in the holding of two Royal Commissions—the only time in Australian history this has occurred.Cream painted wooden box with metal hinges. There is an inscription and ship on the lid and autographs written in ink on the underside of the lid. On top of lid - HMAS Voyager 1957 On bottom: Bills, bills and more bills !!!!!! Dotted line R Cochranehmas, voyager

The items in this collection of Ecclesiastical Linen were used by St. Andrews Anglican Church on the corner of the Esplanade and 14 Drummond St, Dennington, Victoria. The first Anglican service was conducted on December 22nd, 1907. The church was decommissioned in January 2003. The items donated include Maniples, Chalice Covers, a Goblet Cover, Altar Cloths, Matts, Priest's scarf, armband and sashes, and a bag that is a cover for the Baptismal Towel. HISTORY OF ST ANDREWS, DENNINGTON The land on which St Andrews Church was built in Dennington was surveyed in the 1840s and reserved for church purposes in 1855. In 1889 the Farnham Dairy factory relocated to Dennington and the town began to grow as involvement in the dairy industry increased in the area. In 1896 plans for a church hall on the reserved land were considered and on 22nd December 1907, the first Anglican Service was conducted in Dennington, with 60 people attending. In August 1909 the first building was opened with a midweek evening service conducted by the Rev. J.A. Coe. The Sunday School was opened the following year. In that same year, Nestle took over the Farnham dairy plant. On December 20th, 1914, a new church was opened in memory of Andrew Peacock, who passed away in 1912. The funds had been raised by the community and 150 attended the morning service. The building was described as a simple edifice with a plain exterior and high, wide pointed windows, and a comfortable porch entrance, all of which gave a pleasing impression of light and space. In 1935 the average attendance for morning services was just over 22 people. In 1936 extensive repairs and replacements were carried out. In 1947 the first recorded Pastoral Festival took place and in the same year, a Ladies Guild was formed. In 1954 water services were connected to the church building. Many items of furniture, furnishings and books were donated over the life of the church, including handworked linen items. Further items were added due to the work of the Ladies Guild, as well as donations in memory of church and community members.These items of Ecclesiastical Linen are significant as examples of handworked embroidery and drawn-thread work from the early 20th century. They are also examples of a collection of items used for church services during this period. The Ecclesiastical Linen is also significant for its association with the early development of the local township of Dennington and the importance of setting aside land in the 1850s for the purpose of religious worship. The Ecclesiastical Linen is also significant for its connection to St Andrews Anglican Church, Dennington. The church was funded and attended by the local community in the early 1900s and is now listed on the Victorian Heritage Database (VHD 118083) as a building of historical and social significance. Set of Ecclesiastical Linen. The items were once used in St. Andrew's Anglican Church, Dennington, Victoria, between the years 1907 and 2003. All of the handmade items are in white fabric. Some also have embroidered emblems, tassels and drawn-thread work. White embroidery thread has been used for most of the decorated items, with the following exceptions, which have been embroidered with coloured thread; the communion linen, the Priest's scarf, armband and sash, the altar cloths, mats and a cover for the baptismal towel. Two items have hand written inscriptions.(See individual objects for details)flagstaff hill, warrnambool, maritime museum, shipwreck coast, great ocean road, st andrews anglican church dennington, dennington church, warrnambool church 1907, ecclesiastical linen, linen for religious service, communion linen, priest's sash, baptismal towel, maniple, eucharist, emblem of rope and cross, embroidered religious cloths, embroidered celtic cross, drawn thread, chalice covers, handmade linen, embroidered linen, stylised cross, the english church, ladies guild dennington, nestle, farnham dairy, andrew peacock, victorian heritage register vhr 118083, hand worked linen, handworked embroidery, j.a. coe

Handmade brown wooden honour board, retangular with octagon-style corners, white painted names of those who served and small Australian and UK flags. Lists the following names: W. Gale, B. Withers, A. Charles, J.B. Dixon, H. Eggleston, M. Harrison *, R. Thompson, W.J. Tanner, W. G. Rail, Wm. Gale, A. W. Ellis, A.P. Smith*, N. Clarke*, T. Fraser*, J. A.McLean, H. Withers*, R. Daglish, A. E. Ellis*, R. B. Dixon, C. Withers, J. Thompson*, J. ClarkeAbove the names listed reads: 19 LILLIPUT 17 / Methodist Church / Honor Roll / Attendants of this Church who / fought for the Empire in the Great Warhonour boards, wwi, the great war, first world war, lilliput

Very old hand-made wooden stool 47 centimetres long, 14 centimeters wide and 19 centimetres high. The top is one and a half centimeters thick. The two sides are made from one centimetres thick wood and are 47 centimetres long tapering to 36 centimeters and seven centimeters wide. The two ends are 17 centimetres long, 14 centimetres wide and two centimetres thick, it checked out to fit into the sides of the stool, there are two centimetre notches cut into the bottom which create the impression of legs. The nails that hold it together are handmade.wooden stool, miner's item