“Penlon was founded as Longworth Scientific Instrument Co. Ltd, in 1943, in Oxford, by personnel from the Department of Anaesthetics at Oxford University.” (Ref. Retrieved from URL 2015: http://www.penlon.com/en/us/about/history.html ) Magill type blade to fit Longworth handles adult size without light bulb and without hinge at the back of the blade. Visible dust veil over its surface with presence of small oxidation spots mostly over the blade canal and base. Almost non used contact studs on base and lateral side at the light bulb connection. It has stamped on the blade base the fitting type name and the place where it was made.Stamped at the fitting base of the blade in cursive writing, Longworth Stamped at the fitting base of the base in capital writing below the previous text, MADE [I]N ENGLAN[D] longworth, magill, blade, adult blades, penlon

This jumper is part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This woolen jumper was presumably a winter addition to the DPCU.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Khaki ribbed knitted jumper with stitched Disruptive Pattern cotton elbow patches, rectangular in shape running the length of the forearm. Similar rectangular shaped patches on the left and right shoulder, bearing two epaulettes, stiched at one end and fastened with velcro and the other. The left upper arm carries a rectangular Disruptive Pattern patch with a seam down the centre, creating two long narrow pockets. Arm cuffs have external seam for approximately 100 mm from the end, indicating that the jumper may have been worn with cuffs folded over. Synthetic strip of green fabric on the interior collar behind a cream coloured label.Label on interior of collar reads: “ELEGANT KNITTING CO./PENRITH, N.S.W. 1993/(047) 32 2491/8405-66-134-9381/SIZE 115cm-125cm XL (broad arrow)/SERVICE No........./NAME.........../“ Reverse of label carries a series of care instructions including “Fasten shoulder straps before/washing/ 80% Wool 20% Nylon”camouflage, general purpose uniform, airforce, uniform, australian defence force

These are stainless steel Hair styling Clips that are used for creating definite, non permanent Waves in a lady's hair c 1920 to 1960. Ladies usually went to the hairdresser for this styling but they could do it themselves at home Gladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals the City of Moorabbin Finger waves were very a fashionable Hairstyle 1920 - 1960. Gladys Reed, who was a member of the Ormond Choral Society c 1950.that performed plays and musicals the City of Moorabbin used these 'butterfly clips'Steel spring 'butterfly clips' used for crimping hair to form waves. Sanitarium Health Food Company Box c 1960 used for storage.hairdressing, finger wave hairstyle, steel, fashion, theatrical props, craftwork, sequins, beading, early settlers, moorabbin shire, mechanics institute cheltenham, ormond choral society, postworld war 11 settlers, housing estates moorabbin 1950, bentleigh, ormond, moorabbin, cheltenham, drama societies, musical society cheltenham, clark judy, reed gladys, reed george, hairdressing salons

Boyd outlines the history of Canberra's design and construction. He argues that Canberra's strength is its planning and axially-based landscaping, but that it lacks the buildings which make the Le Corbusier's Chandigarh interesting. Boyd is highly critical of Chandigarh as an urban environment and concludes that for non-architects, planning and connection to nature is more important than buildings.Original manuscript published as 'Canberra Master Plan: Walter Burley Griffin' in World Architecture 4, John Donat (ed.), Viking Press 1967, pp 202-205.Typewritten (p/copy), quarto, 6 pageswalter burley griffin, canberra, john overall, lake burley griffin, oscar niemeyer, le corbusier, chandigarh, city beautiful, garden city, urban planning, robin boyd, manuscript

Gippsland Heritage Journal is a journal, produced about every nine - twelve months, for those interested in regional, local and family history in Gippsland, Victoria, Australia. It is compiled by Meredith Fletcher, Debbie Squires and Linda Barraclough and includes a diverse range of articles, both academic and non-academic. This issue has been edited by Meredith Fletcher.This item is a useful reference for the history of Gippsland.A 64 pp magazine, plastic covered, titled Gippsland Heritage Journal. The front cover is orange with a b/w photograph of Mr Stringy at Dead Horse Flat on the Omeo Road c 1937. The magazine contains photographs, articles on the history of Gippsland.On back - library barcode and price sticker - $13.20. On the front cover is a call no. 996.65 GIP journal-gippsland-heritage-journal history-gippsland mr-stringy-omeo

Gippsland Heritage Journal is a journal, produced about every nine - twelve months, for those interested in regional, local and family history in Gippsland, Victoria, Australia. It is compiled by Meredith Fletcher, Debbie Squires and Linda Barraclough and includes a diverse range of articles, both academic and non-academic. This edition has been edited by Meredith Fletcher.This item is a useful reference tool on the history of Gippsland.A 64 pp magazine, titled Gippsland Heritage Journal. The front cover is maroon with a b/w print of Mitchell's coach at the Ensay stables. The magazine contains b/w photographs, articles on the history of Gippsland.stamped on inside back cover : "Orbost Secondary College Library"book-gippsland-heritage-journal gippsland-history

GHJ is a journal, produced about every nine - twelve months, for those interested in regional, local and family history in Gippsland, Victoria, Australia. It is compiled by Meredith Fletcher, Debbie Squires and Linda Barraclough and includes a diverse range of articles, both academic and non-academic. Since No.24 it has been a partially refereed journal.(ref kapana)This is a useful research article.A 4 pp article copied from Gippsland Heritage Journal No 30, William Morris on the Threshold of Gipps' Land. The author is Annette Peisley.morris-william genoa-history

This item represents a period in time when there was the start by manufacturing industry for targeting the medium to lower socio and economic strata of the purchasing public. It was the beginning of cheaper mass produced items for the non professional (photographer in this instance) recreational minded public. The availability of low cost items was required by an ever increasing population hungering for the "do it yourself" amateur.This camera was owned by Margaret (Peg) Shefford nee Turner, who retired to Mount Beauty in the mid 1980s. The camera was purchased in 1920 and used up to the 1940's when her her daughter, Midge Clooney used it. When the Shefford family emigrated from England to Australia (1953), it was used to take photos of the ship voyage.This item is a Campfire Box Brownie. Model "F". It is a black vinyl covered tin box shell. It has a short leather hand strap (110mm) (stamped "BROWNIE") on the top side of the box, fastened by a metal stud at each end. There are two clasps holding the front and rear sides. Viewer (photo frame number) and lens (apertures) are on opposite sides.Stamped within a circular section on the back section is "No 2 BROWNIE" underneath,"MODEL F" in smaller letters "MADE IN CANADA BY CANADIAN KODAK Co., Limited, TORONTO, ONT". a smaller circle within has "USE KODAK FILM No_ 120"portable camera, photography, hobby, low cost camera

This jumper is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This woolen jumper was presumably a winter addition to the GPU.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. Navy blue ribbed knitted jumper with stitched navy cotton elbow patches, rectangular in shape. Similar rectangular shaped patches on the left and right shoulder, bearing two epaulettes, stiched at one end and fastened with velcro and the other. The left shoulder carries an Airforce embroidered patch at the top of the arm. Arm cuffs have external seam for approximately 100 mm from the end, indicating that the jumper may have been worn with cuffs folded over. Synthetic strip of black fabric on the interior collar behind a cream coloured label.Label on interior of collar reads: “CALCOUP KNITWEAR/291083/ 06/01 / 8405/661468799 / SIZE: 115cm-125cm/SERVICE No........./ NAME........../MACHINE WASHABLE GENTLE CYCLE/Fasten shoulder straps before/washing. Warm machine wash,/inside out on medium cycle./Do not bleach./Warm rinse. Normal spin./Doi not tumble dry./Dry in shade. Warm iron./ Dry Cleanable A/80% Wool 20% Nylon”camouflage, general purpose uniform, airforce, uniform, australian defence force

The stadium was opened on the 24th July 1970 by Victorian Premier, Dick Hamer. It was the most famous basketball venue in the 70's & 80's.costing $8mil. The stadium was financed by basketball patrons under the administration of the Nunawading Amateur Basketball Association, a non profit community advancement company.The stadium caters for 7000 players per week (2015).Coloured Photograph of the East Burwood Basketball Stadium, Burwood Hwy, East Burwood. Three people walking away from the complex.basketball stadium - east burwood, sporting venues

30 cm tactile yellow ruler with black marking every 5 centimeters with raised markings, has two different edges - straight and notched. The straight edge can be used for measuring and drawing, and the notched edge designed to help place pins when creating charts and graphs or using a compass. There are non-slip pads on the back of the ruler. 1 yellow ruler with black large print numbers and black measurement indicatorsRNIB LT21 (on back)assistive devices, royal national institute for the blind

Pomoca is Swiss based company established by Louis Dufour, a hotelier in Avants, Switzerland. His son Éric developed the production of non-slip skins, and later adhesive skins, as well as many other mountain accessories in1940s.The glue was used by the donor to glue skins on his cross country skis when skiing on the Bogong High Plains.This item is significant as it was an important product used in the ski industry.A small tube of Pomoca skins glue in a blue container with white behind brand section. The box also features instruction in German and French.COLLE POUR PEAUX POMOCA ANTIDERAPANTES DE SKI Translation - Glue for Pomoca anti slip ski skinsski equipment, ski skins, pomoca products

The group pictured are young Ithacan girls who were taught by Olga Black and they are wearing the traditional Ithacan dress. The group performed at various IPS events including the annual ball, Christmas parties. Both Olga and her sister Nina, taught Greek dancing to many people over the years, both Greek and non Greek. Many young Australian born people of Ithacan descent develop a greater appreciation and awareness of the Greek and Ithacan culture through learning traditional dances.A coloured photograph of a dancing group dressed in a Greek costumes. In the group there are five older girls and a younger girl as well as one boy.

This crucible was raised from the wreck of the Loch Ard. It is one of six similar relics, in a range of sizes, now in the Flagstaff Hill collection. All were manufactured by the Morgan brothers who founded the Patent Plumbago Crucible Company in 1856, making crucibles in a small factory in Battersea London. A crucible is a container used for purifying and melting metals so that they can be cast in a mold to a predetermined shape and use. They must withstand extremely high temperatures, abrupt cooling, and shed their contents with minimal adherence. The addition of graphite to the traditional firing clays greatly enhanced the durability of industrial crucibles this technique was pioneered by the Morgan Bros thereby making a significant technological advance in foundry technology and metallurgy. The Morgans first noticed the advantages of graphite crucibles at the Great Exhibition held in London in 1851. Initially, they contracted to be sole selling agents for the American-made products of Joseph Dixon and Co. from New Jersey, but in 1856 they obtained that firm's manufacturing rights and began producing their graphite crucibles from the South London site. The Morgans imported crystalline graphite in 4-5 cwt casks from the British colony of Ceylon (now Sri Lanka) and mixed it with conventional English (Stourbridge) clays to be fired in kilns. Their products were purchased by the Royal Mints in London and India and exported to official mints in France and Germany. They were successful exhibitors of their crucibles and furnaces at the London Exhibition held in 1861 (Class 1, Mining, quarrying, metallurgy and mineral products, Exhibit 265, Patent Plumbago Crucible Co). The range of sizes represented by the six crucibles retrieved from the Loch Ard suggests they may have been part of a sample shipment intended for similar promotion in the Australian colonies or at Melbourne's International Exhibition to be held in 1880. A newspaper account of an 1864 tour of the Morgan brothers' 'Black Potteries' at Battersea indicates: "All the pots were numbered according to their contents, each number standing for one kilogram, or a little over two pounds; a No. 2 crucible contains two kilograms; a No. 3, three kilograms, and so on." These numbers are obscured by marine sediment on three of the crucibles in the Flagstaff Hill collection, but those legible on the remaining three are 5, 6, and 8. None of the six is of the same size. (For more information on the Loch Ard wreck see note sec this document) The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck of which the crucible is a small part. The collections objects give us a snapshot of how we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. Through is associated with the worst and best-known shipwreck in Victoria's history.A medium size crucible, or fluxing pot, for heating and pouring molten metal. The container rises in a slight curve from a smaller flat base to a wider open top with a lip for pouring. It was recovered from the wreck of the LOCH ARD. The crucible has a coating of sediment that obscures its numerical specifications of size and capacity. The markings that remain visible indicate it is a Morgan’s crucible, made with graphite to prevent cracking and provide a smooth non-adhesive inner surface. .On base: “…ORGAN’S …ENT”flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, graphite crucible, plumbago crucible, morgan's crucible company, loch ard, morgan potteries, crucible, fluxing pot

Richard Liebreich of Germany invented his design of ophthalmoscope in 1855. This example is complete in its case with Coccius lenses and condensing lenses. Early ophthalmoscopes required an external source of illumination, eg lamp or candle, and light was reflected into the eye to be examined by the mirror on the ophthalmoscope. The earliest versions of the Liebreich ophthalmoscope used a polished metal surface to reflect light; glass mirrors were introduced in 1870. A condensing lens was held in front of the patient to view the image. A Coccius lens could be clipped into the holder to counter ametropia of user or subject.This Liebreich ophthalmoscope is significant for the collection as it is the only complete example of the three held in the collection.Cased Liebreich ophthalmoscope with 5 small coccius glass lenses and 2 glass condensing lenses. Non-illuminated ophthalmoscope has concave mirror in round head with central sight hole.Hinged coccius clip attached to hold lenses. Black metal head, silver coloured mount and black turned timber handle. Case has black leather outer lining and purple velvet and satin inner linings. Case hinged with snap closure. On front of case:"LIEBREICH'S OPHTHALMOSCOPE" 4 of 5 Coccius lenses engraved with powers: "8-", "12-", "-01", "+01"ophthalmoscope, optometry, ophthalmology, liebreich, coccius, lenses, eye examination, fundus, funduscopy, non illuminated, instrument, eye doctor, liebreich ophthalmoscope

Typewritten loose-leaf Paper re: history of St. Liborius, Eaglehawk (no title page, no author, incidental ref to date on page 8 ie 1982). Detailed history incl ref to: Design and erection; Sisters of Mercy; Franciscan Order of Friars Minor; chalice; weddings, baptism and font; school; convent; the ''relic of St Liborius''; current personnel and church population. Footnotes (36) and possibly a separate non-stapled.''Select Bibliography?church, history, st liborius church eaglehawk, sisters of mercy, franciscan order of friars minor, history and relic of st liborius. dr backhaus. st kilian's.bishop reville. w. e. brown. eaglehawk. bishop cane. st. marys college. sistewrs of st. joseph.

The Hall Cherokee II glider is an American design for amateur construction from plans. The designer was Stan Hall (1915-2009), a professional engineer, who gained extensive experience in the United States aviation industry during World War 2 including the programs for military gliders. He continued to work as an engineer for aircraft manufacturers and as a consultant to the industry after the war. He was active in gliding and, in particular, the home built sailplane movement. The Cherokee II was one of about 10 glider designs that he produced: it came out in 1956. It is understood that over 100 Cherokee gliders have been built. In Australia the number is possibly 10 or 11. The Hall Cherokee VH-GVO was built by R.D Meares of Caringbah, New South Wales. The glider was registered as VH-GVO on 11 October 1973 and given serial number “GFA-HB-82” by the Gliding Federation of Australia. The Logbook for VH-GVO appears to be a complete record of the flying history; in aggregate 210 hours 40 minutes in the air from 331 flights. The first test hop occurred on 29 July 1972 at Camden, New South Wales. VH-GVO was last flown on 22 July 1986. Many of the flights recorded are of one or two hours duration. The glider was last inspected and certified as airworthy and in a reasonable condition at the Hunter Valley Gliding Club in July 1986. Since that time, until transferred to the Australian Gliding Museum, the glider was in storage. Structural restoration work has been completed on the fuselage and one wing. However, inspection of the other wing revealed extensive damage to the ribs and spars and consequently a decision was taken to make it a static exhibit. The exhibit is an example of home built construction of a type that has proved popular amongst amateur glider builders.The Hall Cherokee (formerly registered as VH-GVO) is a single seat wooden home built glider. The glider is constructed from wood, plywood, fabric and metal fittings, all commercial grade except for main wing fittings, pulleys, cables and bolts. The fuselage is simple with four main longerons and bulkheads with diagonal bracing. The wing has two identical solid spars which form a geodetic structure, hence the leading edge is non-structural. Registration VH-GVO – serial number GFA-HB-82 australian gliding, glider, sailplane, hall, cherokee, meares, hunter valley gliding club

A non-technical introduction and survey of seventeen Australian languages from across the continent; various authors. Simple grammatical information and wordlists organised by meaning. Introduction describing characteristics of Australian languages and relationship to kinship systems, address list of language centres, each language chapter has introduction, notes on wordlist, spelling and pronunciation, grammar and extensive wordlist in 26 or more categories; language index and English index; chapters annotated separately.Word lists, mapslinguistics, glossaries, vocabularies

A Yonex (probably Alumina model) green metal tennis racquet, with flattened double shaft, white wooden shaft casing; and a handle wrapped in white rubber tape. Black plastic Dunlop-brand butt cap. Remains of silver, barely legible 'Yoneyama' sticker on base of head. Non-original grey tape mostly cover up logos on shaft casing. Materials: Metal, Plastic, Nylon, Adhesive tape, Adhesive label, Rubbertennis

A badly damaged brown leather bound Common Prayer book with faded red edges to the pages. On the front and back covers stamped inside a tan rectangular shape - is: Society for Promoting Christian Knowledge and the spine has five raised bands across it. There is a Contents page at the front. At the back there is a New Version of the Psalms of David fitted to the tunes used in churches, 1824. Pp. 320, plus the ad0iitional non paginated Psalms section at the back. non-fictionA small, The Book of Common Prayer and Administration of The Sacraments and other Rites and Ceremonies of the Church, according to the use of the United Church of England and Ireland: together with The Psalters or Psalms of David pointed as they are to be sung or said in churches.religious books, hymns, prayers, psalms

CEMA Art Collection Winner of 1968 Portland Art Society Art Prize for the category Oil or similar medium.The painting depicts several tall, dead trees in the foreground with dense living trees in the background. The foreground is green, white and yellow. The work has an interesting texture created through the use of clearly defined thick paint strokes. This technique is particularly evident in the foreground where it has been used to create the ground from which the dead trees stand. The work has a painted wooden frame with material mount and non-reflective glass.Front: R. ARENDSEN '67 (black, lower right) Back: RENNEE ARENDSEN "DEAD WOOD FOREST, MALLACOOTA" (1968) (typed) Stamp: KATRINA GALLERIES 485 CENTRE ROAD BENTLEIGH, VIC 97-6715 Yellow Sticker: 1967 Handwriting around back of frame.female artists, female artist, landscape, trees

Sign - Piece of sheet steel folded to give an upstand or method of attachment to a pole, enamelled with red, white and black paint for use at tram stops. Small red band at top, white band with letters "HAIL CARS HERE" and small red band underneath, on both sides to indicate to drivers a non-compulsory stop. Same sign used for same purpose in Ballarat. Has three holes for screws on the upstand or fold section.trams, tramways, tram stops, signs

Knox Pharmaceuticals Ltd is a UK registered pharmaceutical wholesaler that offers a wide range of prescription, non-prescription and other pharmacy related items. Knox Ltd are licensed to supply pharmacies, hospitals, clinics and other healthcare providers; both in the UK and overseas. Since 1989, we have grown into a large and successful pharmaceutical distribution company based in Ripon , UKAn empty brown glass bottle that contained ;Mendaco' tablets used for treating Asthma, Bronchitis and Hay Fever.Front ; MENDACO / for / Asthma / Bronchitis / Hay Fever / 3/- size / Made in Australia for / THE KNOX DRUG CO. /(Pty Ltd ) Distributors / Melbourne, Sydney, / Wellington. Left side ; Contains ……. Right side ; SAVE MONEY / ……….By purchasing the larger sizes……… Back; DIRECTIONS / Adult dose ….. Children dose ……..Base: A F583 Mpharmacy, medicines, the knox drug company pty ltd, melbourne, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, asthma, mendaco

Perfect Cheese Company was founded in 1930 by newly-arrived Italian migrant Natale Paquale Italiano. The company specialised in traditional Italian-style cheese but also produced Greek, Cypriot and Maltese origin cheeses. The cheeses were sold in Australia and Italy with all products being matured and non-processed. The company remained in operation until the early 2000s.This cheese press is significant as it represents the machinery used by an early cheese production company.Stainless cheese press machine with three steel supports and two threaded rods will spring tension wheels to screw down to pressurise the hoops containing cheese.J & T YOUNG AYR UKallansford, perfect cheese company, avery, cheese manufacturing, dairy industry

Perfect Cheese Company was founded in 1930 by newly-arrived Italian migrant Natale Paquale Italiano. The company specialised in traditional Italian-style cheese but also produced Greek, Cypriot and Maltese origin cheeses. The cheeses were sold in Australia and Italy with all products being matured and non-processed. The company remained in operation until the early 2000s.This weighing machine is significant as it represents the machinery used by an early cheese production company.Large metal machine with cast iron with a cast iron frame and a stainless steel rectangular bowl in a cradle. The round weighing scale at the top shows a weight scale up to 1100 pounds. A mesh stainless steel baffle strains the milk.Made in England Birmingham - AVERY SOLE AGENTSallansford, perfect cheese company, avery, cheese manufacturing, dairy industry

The East Burwood stadium was opened on the 24th July 1970 by Victorian Premier, Dick Hamer. It was the most famous basketball venue in the 70's and 80's costing $8 million. The stadium was financed by basketball patrons under administration of the Nunawading Basketball Association, a non-profit community advancement company. The stadium caters for 7000 players per week.Coloured photograph of the basketball stadium East Burwood. Cars parked at the front. The East Burwood hall in the distance. Located in Burwood Hwy East Burwood.basketball stadium, east burwood, sporting venue

This object relates to Frederick WOOD. He was born on 05/11/1909 in UNK. Frederick served in the BRITISH ARMY (1868235) enlisting on, 12/11/1929 in Everton, Liverpool, ENG before being discharged from duties with the Army as a Non-Commissioned Sapper (SPR). Frederick WOOD was not a prisoner of war. His next of kin is R WOOD (Wife)BRITISH ARMYliterature, ballarat rsl, ballarat

This object relates to Christopher John ATKIN. He was born on 18/08/1948 in Colac, VIC. Christopher John served in the Army (3796744) enlisting on, 15/02/1971 in before being discharged from duties with the 3rd BATTN RAR as a Army Non-Commissioned Private (PTE) on 16/10/1971. Christopher John ATKIN was not a prisoner of war.second world war (ww2), 1939 - 1945, personal items, ballarat rsl, ballarat