Brown leather money belt, with metal buckle. The belt has four pouches on the exterior of the belt with the pouches being secured closed with metal press studs. At the rear of the belt is the following inscription: “With Best Wishes from the Mayor, Councillors & Citizens of the City of Prahran”harrison, ww2

Brown leather money belt with metal buckle and 3 pockets secured by metal zips. Affixed to the belt is a brass regimental shoulder badge, with the initials “ RF” ( Royal Fusiliers ) and brass flaming grenade with 7 points. Also affixed are 2 brass buttons.The inscription on the brass button nearest the buckle refers to “Australian Military Forces”; and the remaining brass button has inscription too small to decipher, with a rose imprint.harrison, ww2

Khaki webbing pouch for two .30 Calibre, M1 Carbine 15 round magazines. Metal Lift-the-Dot studs.Front of flap reads U.S, inside flap reads Camlin Fashions of America Inc. 1944pouch, magazine, m1 carbine, cotton canvas

Metal rectangle cases with discoloured tape wrapped around bottom of magazinesmagazine, m1 carbine

The Mess Box ( 0089.1 ) is one of two with the partnering box referenced at 0089.1Aluminium Mess Tin with metal movable steel handle attached to one end.Inscribed on aluminium plate affixing handle to box “ C & B. Ltd. 1939. “ with arrow pointing upwards.

The mess box ( 0089.2 ) is one of two issued with the partnering box referenced at 0089.1Aluminium Mess Tin with metal movable handle attached to one end.Inscribed to aluminium plate affixing handle to box “ C & B 1939 “ with arrow pointing upwards.

U.S. M1 Steel Helmet post WWIISteel with green painted surface of sand & paint with welded rim. Two cotton webbing chin straps with metal bucklesOn front of helmet reads SMILEYu.s. m1, steel helmet

Metal cup shaped to hold plastic water bottle (canteen) (0115.1)(On handle) STOKES AUSTRALASIA LTD. 8465-66-058-5567 (part number) 1989 (scratched onto side of cup) MAGPIE (soldier's nickname?)

Cloth holder for water bottle (Canteen) and drinking cup Loops (plus metal clip and metal 'hook') for attaching to belt Nil

This item has not yet been identfied as to use, origin, etc. Any information to assist identification would be appreciated.Olive green cylindrical fluted pressed metal tube. Sealled one end, with twist top lid attached by short chain at other end. Evidence of removed carrying sling mounting brackets (??) both ends.

Chris Albers served in Cambodia, with the UN Forces late 90's Russian AK-47 bayonet and scabbard cross mounted with metal wires in stained light walnut colour wooden glass fronted display case. Leather strap and buckle attached to mounting end of bayonet. Nylon hanging cord for wooden case stapled to back of wooden case. Black masking tape covering mounting wires on back of wooden case. White label with barcode on rear of case.Russian AK-47 bayonet and Scabbard. 0040 Memory Frame 10" XS with barcode on white label.cambodia, un forces, ak-47, bayonet, scabbard

Manufactured during World War II Manufactured during WWIIWWII 3 inch Mortar sight, Mk1, Lensatic. Dark green coloured brass metal body with brass fittings. Aluminium coloured circular dial with black painted numeric (zero to 180 degrees) and alphabetic (left and right) markings. Silver coloured butterfly nut fitting on lower body for sliding clamp adjustment. Steel screws and nut fittings. Two clear glass levelling bubbles are provided. Left and right adjustment dials, locking clamp provided for fitting of sight to a circular post fitting.SAR 1941 24-36 DD02124-3 TO LOCK (with direction arrow) L R (with arrow point marking) 0 to 9 R 0 to 9 L 0 to 180 R 0 to 180 L 210 GRS SEC CHARGE II I MR 2454 graticule markings 1400 to 600 Graticule markings 2700 to 10003 inch, mortor, sight, australian defence forces, ww ii

Black bottle with long neck, made of black glass with black metal screw top and label front and backKapyong 1989 is at top of label with emblem between, then 111, 38th year, Kapyong, Commemorative Port. 750 ml. Wine made in Australia. 18% Alc/vol. Mt Aitken Vineyard Gisborne Vic On the back of the bottle

This model clinometer used in both WW1 and WW2 for checking artilllery and mortar barrel anglesPrecision instrument widely used by Alliied forces in two warsMetal with some parts painted black. Device comprises a segment of a circle with an adjustable radial arm with bubble level on a slide attached"Clinometer Field Mark VI No. A.221" Noblet and Forrest 1941" "Direction of Target" with arrow. "Use this Base for 0° - 45°" "45° - 90° Target" with arrow Circle segment graduated with 0 - 44 degrees on side, 45 - 89 degrees other side. Arm graduated 0 - 60 minutes both sides clinometer, artillery instruments

Two metal tins of which one fits into the other. Larger tin has two handles, smaller tin has only one handle as the other has broken off.Smaller tin - D(arrow)D, IDtin, mess tin

Awarded to L.G. Donelan by the Shire of TowongMetal medallion, tarnished on face and rear.Face - FOR GOD, KING AND COUNTRY Back - SHIRE OF TOWONG For Honourable Service Rendered L.G. Donelan World War 1939 - 45l.g. donelan, towong

Metal Box, 5-sided, various sighting and other dials and attachments (including battery compartment)A. M. BUBBLE SEXTANT MARK IX 6B/151 No.15798/40 BRIT. PATS. 480112 490621 AND PENDING

WW II British Gun Sight 'Telescopic Bearing' Brass barrel with tops lens for sighting (missing lens cap on barrel) Originally on a circular metal base plate, most of which has been cut off(T)EL BEARING No 10 MK I (imprinted on underside of base plate; other inscriptions on base plate of original article missing from this item) ("T" missing as a result of base plate cutaway)

World War II Manufactured during WWIIDark brown rectangular stitched leather case with folding lid for a WWII 3 inch Mortar sight, Mk1, Lensatic. The folding lid has a leather strap and metal buckle to hold the lid closed. The leather case has a leather adjustable carrying strap with a metal buckle. Shaped leather covered wooden mounting supports are located inside the case. Leather covered padding is provided on the inside of the case lid.CASE 3 INCH stamped on case top. Other markings on the case top are illegible. White painted number 3 with a faded red background on the case lower front. White number 1.3 painted on case top.3 inch, mortor, wwii, australian defence forces, case, sight, leather

Circa WWII type 92 Japanese steel helmetCirca WWII japanese type 92 steel helmetWWII Japanese steel helmet, Type 92, painted silver post-war. A five point star is soldered to the front. There are four small holes (two on either side) in the top of the helmet. A circular metal stud is located on either side of the helmet at the rear. Three liner mounting attachment points are located on the inside rim of the helmet. The rim of the helmet is cracked in two places.helmet, japanese, headgear

Identification plate is for the Royal Australian Mechanical and Electrical engineers (RAME), 3rd Military District, vehicle number 743.Vehicle identification plate used by the Australian Army.Small square shaped steel metal plate. Khaki coloured paint on rear face. Blue, yelow and red horizontal painted stripes on the front face. White coloured numbers with a narrow horizontal white line painted on front face. Small hole drilled through the plate on the top.Horizontal blue, yelow and red horizontal stripes. Number 3 on top of a narrow horizontal white line with the numbers 743 underneath.vehicle, identification, plate, rame, 3rd military district

Vehicle identification plate used by Australian Army HQ post WWIIAuatralian Army vehicle identification plate used post WWIISmall square shaped painted steel vehicicle identification plate. Painted khaki on the rear and front edges. Red, blue and red horizontal painted stripes on front face decal. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.Red, blue and red horizontal painted stripes on front face. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.vehicle, identification, plate, australian army, army headquarters

Wood-encased telephone (aluminium-reinforced edging strips) in leather carrying case. Hinged lid mostly aluminium (some wooden trim). (Missing from original: Metal dividers/calipers should be held by the leather strips on front of case).Metal instruction plate inside lid - shows wiring diagram with instructions in Japanese. Serial No. (Front of wooden box): 146112 (other inscriptions in Japanese)

Used by Australian Army circa 1960s.Used by Australian Army circa 1960sUnpainted US style aluminium canteen formed by two seam welded halves (front and back sides) with an aluminium threaded top for attaching a top to the water canteen. The water canteen has a black plastic screw top lid attached to the neck by a metal link chain. The front of the water canteen is bowed outwards with the back being flat with a curved top doorway shaped indentation.australian army, water canteen, aluminium

Used by Australian Army circa 1960sFelt lined khaki green stitched water canteen cover with two metal press studs on the top front of the cover used for attaching the top to the front. There are four stitched lines on the front of the cover from the top to the bottom. The cover has stitched reinforcement around its top opening. A metal belt loop attached is stitched to the back of the cover with webbing.cover, canteen, khaki, australian army

Vietnam era Australian Army backpackVietnam era Australian Army backpackAustralian Army Vietnam era khaki green multi compartment canvas with cotton/polyester adjustable webbing and metal buckle securing straps. The backpack has two main compartments located at the top and bottom, with two smallèr comparments located either side of the top. The back pack has a hard plastic insert at the back, with two padded shoulder carrying straps. Two padded strips are located on the rear of the backpack. Two adjustable webbing and metal buckle straps secure the top compartment. Three adjustable webbing and metal buckle straps secure the bottom compartment. A wide webbing with multiple insert metal eyelets is stiched across the middle front of the back pack, two across the side at the top, and one across the top flap. The top flap has a webbing strap handle, a stiched clear plastic identification compartment, and two reinforced stiched slits on either side of the rear of the flap.1973 is printed on the rear of the backpack.vietnam, australian army, backpack

Model of the ship served on by W Thomson during WWII.Scale model of the HMAS Maryborough that was operated by the Australian Navy during WWII.Grey and black painted plastic and wood scale model of the Bathurst class HMAS Maryborough (1940 to 1946) minesweeper (commonly known as corvettes) mounted in a wooden frame glass sided and top case. It has cotton rigging with metal anchor chains. An inscribed metal plate is located on the front glass side. The upper of the model is painted grey, and the bottom black. J195 is painted in black lettering on the bow of the model.J195 H.M.A.S Maryborough 1940 - 1946 Made by W. Thomsonmodel, hmas maryborough, bathurst class, minesweeper, corvette

Metal RAAF Point Cook crest mounted on a small dark red coloured plaque. The plaque has a mounting slot on the back and foward sloping curved sides meeting at a lower point. The circular RAAF crest has a jeweled crown at the top, black lettering at the bottom, and gold lettering on a circular blue enamel background surrounding a brown coloured line drawing of an eagle flying over water with the sun in the background.Point Cook Royal Australian Air Force First And Foremostraaf, point cook, crest, metal, plaque

Used by Colour Sgt Cordwell, grandfather of John Cordwell, past President of Sub-Branch.On loan from John Cordwell's Family (past president of the Montmorency RSL)Nickel plated silver coloured brass metal military whistle and woven brown leather neck loop. The leather neck loop is attached to the body of the whistle by a small circular steel metal key ring. A metal post with a hole attaches the key ring to the whistle. The whistle has a small light brown coloured wooden pea.Premier Wire Works Melbourne Australia 1944 Marked with the Broad Arrowcordwell whistle, military, metal

Wooden tripod mount for lamp, signalling daylight, short range, MK II. The legs are shaped to a point at the bottom and shaped to form a circle when closed. Each leg has a metal fitting attached by metal screws at the top, which supports a circular metal collar fitting for the mounting of the lamp. A khaki coloured stiched canvas webbing with brass buckles is attached at one end to the metal fitting at the top of one leg. The other end has a circular sleeve for using to keep the wooden tripos mount legs closed for storage. One leg has a small brass ring mounted at the top. A metal hook is mounted under the lamp mounting collar.STAND LAMP OR HELIO A MK IItripod, helio, lamp, daylight