Polished, hollowed wooden toe puff with 5 carved grooves . Tight metal spring hinged to toe puff and joined to wooden heel ball. Screw on instep side of toe puff holding hingeMade in Germany ink and 123/8-9 stamped under hollowed toe puff

098?? stamped on instep. Removable instep cast ? 241 on foot cast with locating grooves for instep cast. Locating hole on under foot arch

Carved pale wooden toe. Stiff metal spring. Unsealed wooden ball at heel end1/325/3on inside of toe carving

Wooden pattern used to make impression in sand to form mold for casting hot metal. These patterns were for the caps for bearing covers.Wood, with an oval footprint. Pins underneath with covered channel across oval, cylindrical cap mounted on top of channel, semi-circular (approx) flanges either side of channel cover.

Used to make cast for the metal ring gear for the water wheel which powered the Mill.Slightly arched wooden pattern with wooden ridges along the edge. Three square metal plates with a hole in the centre, bolted on with four bolts. Ten pentagin pieces of wood attached to the face.

Attaches to a tap, used in the milling process. (some taps are still intact in the mill building.)Long cylindrical metal hose which gets narrower near the tip. attached to a long canvass hose.

A tool to set the teeth of saws used in the early 20th centuryA metal guide used to set the teeth of a circular or crosscut saw when sharpening - i.e. to angle the teeth so that the saw bites into the wood.. It was used in the early 20th century.handsaws, woodworking saws, log saws, woodcutter saws

Used to drill railway sleepers in the early 20th Century.'Jigger" - an antique steel large two piece drill used to drill railway sleepers around the early 20th Century. The 50cm drill piece can be detached and replaced and it has a handle with a knob on top to turn the drill. The drill is attached by a bolt and screw.steel, metal, tool, drills

A tool used in the early 20th Century.A two piece metal wrench with an adjustable chain that is used to tighten around metal objects. It has a double triangular pointed grooved jaw grip, a handle and chain attached. They provide safe, reliable and powerful torque. The dual reversible jaws allow ratchet action in both directions without removing the chain wrench from the pipe.Stamped on the handle - Drop forged from bar steel by J.H. Williams & Co, Brooklyn, NY. On a grip jaw at the top is stamped - No 1, 'W' in a triangle shape, Patented Oct.4 '81, Dec.13 '81, Mar. 14 '82, Sep.25 '83, Feb.14 '88 and Brook Chain Wrench at the bottom.tools, equipment, hand tools, wrenches, steel

Used in the 19th centuryAn all steel bit brace made of forged metal with a round knob on the turning handle and a screw to tighten the bit when attached. It was used in the late 19th Centurytools, carpentry tools, woodworking tools, steel

Used in the late or early 20th Century. Could be used to cut steel.A curved steel shaped wooden handled Bow saw with a curved nail puller near the handle. A metal saw blade is attached by a screw at the end where it is fitted. Used in the late 19th or 20th Century.saws, carpentry tools, woodworking tools, tools, steel, wood, metal

Used in the 19th CenturyA large handmade wooden barrel shaped headed maul with two steel bands at each end. The handle is a metal pipe. It has a worn piece of a leather flap near the flanged join of the handle where it meets the head. A solid steel rectangular wedge which was used to split logs is displayed with the maul. It was used in the 19th Century.mauls, striking tools, long handled heavy wooden mallet, steel, wood, tools, wedge, splitting tools, splitting wedges, woodworking tools

Used in the 19th or early 20th century.A steel forged metal headed broad axe with a turned wooden handle for a right handed person's use. It was used to trim posts or logs in the 19th or early 20th century.axes, cutting tools, hand axes, froes, woodworking tools, cleaving tools

Owned and used by the late Mr W.T. Sebire 1900. The frame was rebuilt by Russell Sebire.A large sandstone grinding stone disc with a pale blue wooden frame and metal turning handle/ It was used for sharpening tools such as axes in the late 19th or early 20th Century. grinding stones, sandstone, equipment, sharpeners, sharpening stones, steel, wood

A long wooden handled tool which has a shaped knob at the end. It has a steel point at the other end with a large curved hook casing, attached underneath with a metal bolt. It was used to roll heavy logs or bags.hooks, tools, farm equipment, grappling irons

Used in the mid 20th century.A forged steel hatchet with an axe head, hammer head, nail puller and a lever hole. It has a short metal cased wooden handle with brass rivets. It was used as a trimming hatchet or axe in the mid 20th century. It is a 'Swordfish' brand, made in China.Inscribed with Swordfish brand Made in China with a picture of a swordfish. woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, hatchets, cleavers, tomahawks, wood

Used in the 19th centuryA bill hook or axe-handled slasher which is an axe-handled forged metal blade with a strong curved sharp axe like edge and a straight secondary edge on the back. It has a broken wooden handle with steel or a tang which passed through the handle if it were still attached. There is stamped on the blade near the handle join - '2'. The original finish of the blade would have been, 'Japanned' which is baked black enamel. It was used to cut back scrub, small trees and woody vegetation in the 19th century.'2' stamped on the blade near where it joins the handle.slashers, cutting tools, bill hook slasher, gardening tools, agricultural tools

Used in the 19th century. Pigs were often raised for meat for the family. The scraper was used to remove the bristles from the carcass.A curved metal straight bladed pig scraper used to remove the bristles from a pig's carcass. It has a hook on the top edge to remove the nails from the pig's trotters. It has a short wooden handle attached to the metal on the blade with three rivets. There are two slashers near the flail. On the left is the brand 'Pearson 2532' circa 1914 Made by F G Pearson & Co, Sheffield, Right side (est 1859) Right: brand is indistinct. Used in the 19th century.On the left is the brand 'Pearson 2532' circa 1914 Made by F G Pearson & Co, Sheffield, Right side (est 1859) Right: brand is indistinct.farm equipment, farm tools, pigs, farm

A small steel oval shaped headed bale hook or hand grab with three of nine pointed hooks remaining and a turned smooth wooden handle. The metal head is attached through a hole in the handle with a rivet. It was used to assist with handling bagged goods without causing damage. agricultural equipment, farm equipment, bale hooks, hand grabs

Used by Wandin Sebire for an unknown purpose.An unusual split headed long thin spade with a wooden handle Four rivets attach the head to the handle. At the top the handle is screwed to the metal. It was used by Wandin Sebire, probably for a special purpose - it is not known for what. Spades are usually used for turning soil by pushing against the blade with the foot. Used in the early 20th century.Stamped on the metal handle - '2' and 'S & C Ham'. 'Parkes & Co. Birmingham no. 2'.gardening spades, spades, shovels, gardening tools

An adjustable metal headed hand scarifier with a wooden handle attached with a screw. It has nine teeth with the middle one lower, fixed and wider. It could be altered to suit the width of the row being worked. It was patented 1905.Patented 1905agricultural tools, agricultural equipment, tools, rakes, scarifiers, gardening tools, hand tools

A small combined hoe and rake metal headed hand scarifier or cultivator tool with a wooden handle. It has a pointed hoe shape at one end and at the opposite two hooked spikes. It could be used in small areas such as a garden.agricultural tools, tools, rakes, scarifiers, gardening tools, hand tools, hoes

A metal King Eye slasher with an unusual rounded 'U' shaped open blade and a wooden handle. On the blade is stamped, 'King Eye, PATT NO, 3868 A & F PARKES & CO BIRMINGHAM England'. It was efficient for clearing thin and dense low-lying scrub or bush where an axe would be too clumsy. It is similar to a billhook, but with a longer handle.'KING EYE, PATT NO, 3868 A & F PARKES & CO BIRMINGHAM ENGLAND'tools, agricultural equipment, agricultural tools, slashers, gardening tools

Used late 19th and early 20th centuries.A blacksmith handmade hay fork or pitch fork with three thin forked metal spikes and a handmade long wooden handle. The head is attached to the handle with two rivets. It was used in the late 19th century and early 20th century.gardening tools, gardening equipment, domestic equipment, tools, gardening forks, pitchforks, agricultural equipment

Used in the late 19th or early 20th century.A large triangular shaped metal blade tin cutter for manually opening kerosene and petrol tin lids which were often recycled for use on farms in the 19th and early 20th century. It has a rectangular shaped tubular steel handle attached to the top side by two rivets. On one of the triangular points of the blade is the manufacturer's brand ' Chapman and Co, Enfield S.A'. It was Australian made.'Chapman and Co, Enfield S..A'. tin openers, tools, tin cutter, farming equipment

A small vintage handmade metal rectangular meat chopper with a short metal handle attached to the very sharp blade. It has a turned, patterned curved wooden handle joined to this.cutters, cutting tools, butchers tools, meat chopper, cleavers, butchers knives

Used in the late 19th and early 20th century.A vintage No 2 Class II Salters Improved Spring Balance weigh scale with a weight guage of 0 - 40 lbs. It is made of metal with four rivets holding the front measurement panel covering the spring with a ring at the top and a hook at the bottom to hold the item being weighed. It was manufactured in England by Salters and used in the late 19th and early 20th century.'No 2 Class II Salters Improved Spring Balance weight guage 0 - 40 lbs. Manufactured in England by Salters'''spring balances, scales, balances, weighing instruments

Manufactured by F.E. Kohler & Co, Canton, OhioA vintage post hole digger with two long wooden handles and two metal scooped blades. It is operated with a lever action, with the two handles pulled apart to take a 'bite' of earth. The handles are attached by a nut and bolt. There is a crowbar on the end of one handle and a rammer on the end of the other. The brand is F.E. Kohler & Co, Canton, Ohio.'Kohler Little Giant' patented.tools, agricultural tools, farming equipment, garden tools

It was used on well worked ground.A combined hoe and rake metal headed hand scarifier or cultivator tool with a long wooden handle. It has three curved metal hooks with sharp points and was used to break up the ground. It could be used in small areas such as a garden.agricultural tools, tools, rakes, scarifiers, gardening tools, hand tools, hoes

Used in the 19th and early 20th century.A metal scythe with a long curved wooden handle to manoeuvre the blades. There are also two shorter wooden handles or 'nibs' fitted at an angle to suit the user attached to the main handle by a metal ring. It has two curved pointed cutting blades which are attached by nuts and bolts to the handle.agricultural tools, scythes, cutting tools, agricultural equipment