Showing 10034 items matching " dandenong"
-
Victorian Railway History Library
Book, Anchen, Nick, Puffing Billy Spirit of the Dandenongs, 2017
An illustrated history of 2'6" VR narrow gauge railway in Victoria with emphasis on the preserved Belgrave to Gembrook line.ill, p.108.non-fictionAn illustrated history of 2'6" VR narrow gauge railway in Victoria with emphasis on the preserved Belgrave to Gembrook line.vr narrow gauge railways - victoria - history, narrow gauge railroads - australia - history -
Glen Eira Historical Society
Document - Historic Conservation Areas Project
Contains 4 items relating to historic conservation: 1/Five newsletters (one page each newsletter, dated 07/1975, 08/1975, 09/1975, 10/1975 and the final one 12/1975) describing how the project evolved, project funds, progress, study method, project 1 report, project 2 report and summary as no further funds available. Project was to include all of Melbourne but funding did not allow this. Note: newsletters stamped with Caulfield Historical Society. 2/Letter (one page on official city of Caulfield letterhead) from Andrew Rodda (manager planning) to Hazal Ford (dated 13/11/1989) describing ‘council resolved on 18/07/1989 to proceed with preliminary conservation survey’ and mentions that a copy is included. 3/Preliminary conservation survey for the City of Caulfield (nine pages) describing background, study area, budget, purpose, study outline, timeframe, report format, ownership, tasks and background information (mentions number and types of houses and properties as at 1986 and 1988) and a map of City of Caulfield. 4/Booklet (28 pages) titled ‘Heritage Area – Caulfield North Draft Heritage Guidelines July 1999 – City of Glen Eira’, containing Caulfield North Heritage Area, cultural heritage, Heritage Overlay Area, architectural description, common architectural forms and features, development guidelines, key design checklist. It includes a map of the Caulfield North Heritage Overlay Area, two illustrations about the development envelope and many black-and-white photographs of houses and architectural features.historic conservation areas project niven barbara, newsletters, town planning, historic buildings, heritage studies, housing, royal historical society of victoria (rhsv), read michael, plans, local government, historical societies, committee for urban action (cua), national trust, hopkins sherry ms., ford hazel, preliminary conservation survey, town planning, heritage studies, rodda andrew, city of caulfield, housing estates, victoria national estate grants program, australia icomos, burra charter, buildings structures and establishments, land surveys, suburbs, historic buildings, architectural significance, ‘caulfield’s heritage study’, soloman geulah dr., caulfield library, dandenong road, nepean highway, hotham street, iknerman road, orrong road, north road, poath road, ‘plan of the city of caulfield’, north ward, east ward, south ward, west ward, kooyong road, neerim road, bambra road, balaclava road, shire of caulfield, railways, world war 1914-1918, depression 1929-1939, rippon lea, labassa, parks, mansions, community services, ‘caulfield north draft heritage guidelines july 1999’, city of glen eira, caulfield north heritage area, glen eira heritage management plan, mayfield grove, normanby avenue, carnarvon street, glenferrie street, arthur street, malakoff street, normanby road, heritage advisory service, construction materials, victorian style, mediterranean style, spanish mission style, californian bungalow style, federation style, architectural style, architectural features, heritage conservation design, building construction, building regulations, aboriginal peoples, carnarvon road -
Glen Eira Historical Society
Book - Caulfield Institute of Technology
Three items of Annual Reports: 1/ Caulfield Institute of Technology Annual Report 1973. Including attached page of Council members and staff. Includes introduction giving history of the Educational establishment. 2/ Caulfield Institute of Technology Annual Report 1974. Includes photocopied sheet of staff and board names. 3/ Caulfield Institute of Technology Annual Report 1977. Includes two photocopied lists of staff and board members.ward t., boykett kenneth, whitlam gough prime minister, abbot pam, horne donald, k.h. boykett building, railway avenue, dandenong road, queens road, princes avenue, phillip law building carnegie, caulfield east, school boards, library, school of industrial studies, counselling services, computer centre, financial statement, degrees, diploma and graduate diplomas, certificates, school of engineering, school of general studies, administration services, colleges, moderne style, student union, building construction, building sites, budget task force, partridge committee (post secondary education), williams committee (education and training), saxe committee (nurse education), school of business, education, tertiary education -
Mission to Seafarers Victoria
Film - Documentary, Cinesound, The Flying Angel, 1952
This promotional film made in the early 1950s in Melbourne. Padre Oliver may have been inspired by an earlier film also called The Flying Angel, shon at the Mission in 1948. An article for the Herald, Saturday 27 December 1952, page 9, mentions the screening of a Cinesound short about the world's merchant fleets and the Missions to Seamen. An illuminated light house beside the ship - a £5000 model of an ocean-going cargo ship on display at the State Theatre for a week - was a collection box for the work of the mission. Flying Angel flag. Padre Oliver with flyer from the Flying Angel Club on a ship visit. Crew on a ship. Clubs at the Port Melbourne, Williamstown, and Melbourne. Activities: dances, outings. boxing, movies. Ladies from the Harbour Lights Guild. Motorbus donated by Prahran Patriotic Funds The Cruel Sea, by Nicholas Montsarrat was published in 1951.The documentary was shown for a week at the State Theatre along with a £5000 model of an ocean-going cargo ship was on display and visitors could donate money in a box in a shape of a lighthouse.Promotional documentary produced in 1951 presenting the different activities of the Mission. The 3 buildings are depicted.port melbourne, williamstown, melbourne, ww2, nicholas montsarrat, cinesound productions, the cruel sea, frank leslie oliver, padre oliver, dance, movies, picnics, motorbus, activities, appeal, hobart, cinema, dandenongs -
Emerald Museum & Nobelius Heritage Park
Memorial Certificate
World War 1 Memorial certificate in memory of William Eric Durance -
Emerald Museum & Nobelius Heritage Park
Incense Burner, Early 19th century
Nancy Hawley requested one of a pair come to the Emerald Museum . It was brought back from Japan by a friend of Noni Smith after World War 2. Noni Smith was Mr Murphy's nurse for many years Noni died at the age of 90 years . She was principal of Emerald Primary School. She was very involved with the recovery after Ash Wednesday 1983 firesJapanese Incense Burner Circa early 19th centuryFloral Bowl with Figured Legs and Topjapanese insense burner -
Emerald Museum & Nobelius Heritage Park
Registered Letters Received, Menzies Creek Post Office 1887 to 1926, late 19th century
The book is primarily historically and socially significant for understanding the local community as it lists all the registered letters received at the Menzies Creek Post office. Also gives some insight into the local families.Brown hard cover book with red leather binding on the spineRegistered Letters Received, Pat Ehenholm 6 Menzies Rd Menzies Creek, spine repaired with brown packaging tape. Grandma Wall had Post-Office 1907 to June 1926 (after last entry)post office, menzies creek, mail, registered letters -
Emerald Museum & Nobelius Heritage Park
B/W Photograph, 1920 - 1930
Cr. T.W. Butcher and Mr. McCallum (Early Auctioneer in Emerald). Mr. McCallum is the father of Mrs. McLean, Emerald. Photograph attached to cardboard mount. early auctioneer, emerald, cr. t.w. butcher, mr. mccallum, mrs. mclean -
Emerald Museum & Nobelius Heritage Park
B/W Photograph, Holman Family
The Holman family ran the Guest House near The Falls, Beaconsfield. Left to Right: John Basil Holman, Bostraze Holman (father),front seated Barbara Molesworth Holman, Ellen Molesworth Holman (mother), Derrick Hewlett Holman, Mary Joyce Holman. Photo taken at Bamawm c.1921?holman, guest house, the falls, beaconsfield -
Emerald Museum & Nobelius Heritage Park
Horse Bits
VEMU1615.1 The 2 rings are elongated horizontally and have an axial length of 11cm. The shanks are 10cm long. VEMU1615.2 The rings are 8.7cm diameter, and the shanks are 9.7cm long. VEMU1615.3 The rings are 6.3cm diameter, one ring is circular and the second has a pointed end. The is 12cm long. VEMU1615.4 The rings are 6.2cm diameter, and the shanks 8.4cm long. -
Emerald Museum & Nobelius Heritage Park
Snaffle Bit with Mouthing Keys
Custom made iron snaffle bit with mouthing keys used for breaking in young horses. The horse played with the keys, so that it would end up with a soft mouth. The side bar would help to hold the bit in the mouth. Normally there would be two side bars. The bit is double jointed with a circle in the middle (3.5cm diameter). Hanging from the circle is an oval plate supporting 3 mouthing keys (3.5cm long). The external rings on the bit are 6.5cm diameter with a 19.4cm vertical bar attached to the inner edge of the ring on the right hand side. -
Emerald Museum & Nobelius Heritage Park
Stock Whip, Late 1800's
Belonged to Trevor Pearce's grandfather, who had dairy farms at Kilsyth, and later at Montrose. He abandoned cattle for growing vegetables. This was in 1946Cane handle, plaited leather grip with plaited knob. The leather plaited whip is attached to the handle with oiled twine. The end tip of the whip (cracker) has a leather thong finishing in plaited twine. -
Emerald Museum & Nobelius Heritage Park
Bullock Yoke, Late 1800's
Part of bullock harness. Wooden yoke with 4 holes for the bows, and 3 for the centre metal ring supported by a metal plate bolted into the wooden yoke. -
Emerald Museum & Nobelius Heritage Park
Hand-Scythe- (right handed), Mid 1800's
Long curved wooden shaft with a wooden grip attached at right angles via a steel U-bolt. The long steel curved blade is fitted perpendicular to the wooden shaft and it projects towards the left hand side of the shaft. The blade has a groove that goes into a U-bolt which tightens it onto the shaft. -
Emerald Museum & Nobelius Heritage Park
Sure Grip Wire Strainer (long chain is missing), 1917 - 1953
The wire strainer was commonly used on Australian farming properties for putting fences up. Sure Grip Wire Strainers were advertised in Australia from 1917 to 1953. The distinctive grips were patented in Britain in 1913 (William Swann, (spring, hook and chain manufacturer, Walsall,in England).Improvements in or relating to means for gripping wire or the like: British patent 24,520/13. 29 October 1913.Steel bar with 2 interlocking grips for fastening the wire.Corroded marking about halfway along the lever. wire strainer -
Emerald Museum & Nobelius Heritage Park
Ring and Pin for Bullock Yoke
Iron pin 24.5cm long, attached to an iron ring of 12cm diameter, via an ovoid shaped hole in the pin. -
Emerald Museum & Nobelius Heritage Park
Large Horse shoe for cart horse
Eight hole horse shoe with 5 nails attached. -
Emerald Museum & Nobelius Heritage Park
Pincers for leading large animal by the nose
Tool made of two pieces of metal with blunt concave jaws that are arranged like the blades of scissors, used for gripping and pulling things. Iron handles 15cm long, with hole cut into the gripping end. The pincers have round, spherical ends for inserting into the nostrils. -
Emerald Museum & Nobelius Heritage Park
Horse Collar
A horse collar is a part of a horse harness that is used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces of the harness are attached.The horse collar is oval, rather than circular and it is not very flexible. It is padded with a straw- like fibre and the shape conforms to the shape of the horse's body. A strap and buckle is attached to adjust to the horses' neck and shoulders. The other buckle on the opposite side of the collar has no complementary strap to attach to it. -
Emerald Museum & Nobelius Heritage Park
Wooden Hub of Jinker Wheel
Bill Cuzen's grandfather had a dairy (Robertson) at Marysville, and he had a jinker dray and other types of machinery.Timber turned hub of jinker wheel. There are 16 oblong spoke holes. -
Emerald Museum & Nobelius Heritage Park
Full Bridle for Driving Horse
Found in the roof space at Three Springs, Clematis with various bridles, harness, reins and collars. They came from under the original post office at "Holly Tree Inn", Olinda.Ornate Leather Bridle made by J.Kelly, St. Kilda and Melbourne. It has blinkers, snaffle bit and a throat strap. Brass studs decorate the leather straps and the leather blinkers each have J. Kelly's brass plates attached.J. Kelly, St. Kilda, Melbourne. -
Emerald Museum & Nobelius Heritage Park
Riding Stirrups
The pair of stirrups have a light steel frame that holds the feet of a rider. . -
Emerald Museum & Nobelius Heritage Park
Emerald Football Jumper, 1950's
Worn by Mick Anzin, during the 1981 winning Grand Final.Machine knitted, sleeveless jumper, with a red diagonal strip extending from the left shoulder to the right hip. The stripe is on both the front and back of the jumper. The number 57 is on the back. "57" -
Emerald Museum & Nobelius Heritage Park
Cow Bell
Iron bell and clapper. The bell is a trapezoid shape of thin, flattened sheet metal with an attached thin metal handle. The clapper is like a thin match stick. -
Emerald Museum & Nobelius Heritage Park
Whippletree, Pre WW2
The whippletree consists of a loose horizontal bar between the draught animal and its load. The centre of the bar is connected to the load, and the traces, chains or straps on each side of the harness, attached to its ends. Whippletrees are used when pulling a dragged load such as a plough, harrow, or log. The whipple tree was attached to a scoop, which was used for building the 'Puffing Billy' railway and also for scooping out Emerald Lake.Wooden bar with metal hook at each end and a metal ring attached to the centre. -
Emerald Museum & Nobelius Heritage Park
Photographic Printing Frame
Used to make paper photgraphic prints from negatives.VEMU1631.1 Wooden framed photographic printing frame with glass plate and wooden backing, held together with flat brass springs. VEMU1631.2 Wooden framed photographic printing frame with glass plate and wooden backing, held together with flat brass springs.VEMU1631.1 Eastman Kodak Co, Rochester, N.Y. made in USA, for 4 x 6 plates. VEMU 1631.2 Eastman Printing frame for 4 x 6 negatives, Eastman Kodak Co., Roch -
Emerald Museum & Nobelius Heritage Park
Large Animal Pincers
Used for leading bullocks, by the nose.Wrought iron. Long handles with rolled over metal at the end. -
Emerald Museum & Nobelius Heritage Park
Hession Bag Needle
Used for sewing hession bags eg. potato sacks.Steel Needle -
Emerald Museum & Nobelius Heritage Park
Cow Bell
Trapezoidal shape, narrower at the top. Folded sheet metal housing with attached handle. The clapper is a folded strip of metal attached to a wire hanger, by a bolt. -
Emerald Museum & Nobelius Heritage Park
Short Chain, 1920's
Used before tractors came in. It was a horse drawn implement.Short chain with hook on one end and screw on the other end.