Bill Sutton Collection Jacob Estey founded te Estey Organ Company Battleboro in the late 1800s. One of the largest manufacturers of reed organs in the world. The company closed in the 1960s. This organ possibly 1923Used by a resident of the Kiewa ValleyMade of white Oak this small organ has a lid on 2 hinges at the sides and has 2 steel clips, each side, to keep it closed. At each end is attached a leather handle to move the organ.Next to the right-hand side of the keyboard is a movable silver knob. It has 2 wooden pedals each with a piece of non-slip material 'glued?' on. Each pedal is attached to the keyboard area with a leather strap. See "Reed Organ Society" La Vernia Tx, USA"Estey Organ Co. Brattleboro Vt USA" on the lid. (Note: Vt = Vermont) "Allan and Co. Ltd / Melbourne / Sole agents for Victoria" on the lid.reed organ, music, estey organs

This item was in use before electricity and was manufactured after the flat stove irons.The weight of the iron base, is heavy, helping in smoothing out crinkly material being ironed. This item permitted ironing of clothes to be separate and away from heating stoves. It permitted greater flexibility for ironing clothes and permitted more control (consistency) of the temperature of the iron.Historically and significantly this item enforces the relative isolation of the Kiewa Valley and period when and where this domestic item was in use(manufactured circa 1950). A rural setting with mining, beef , milk and tobacco production in the early 1900s. Even though the community was in a rural setting, the standards of dress was the same as in the bigger towns and cities. Social and religious mores and values demanded that the personal appearance be clean and crisp no matter where a person was living or working. Heavy laborious work was considered by some religions as virtuous, therefore the heavy and tiring work of ironing during this period had its rewards. Rural areas where the last to be connected to electricity and therefore this item was a domestic necessity far into the 1950's.This iron has a steel base and a metal body coated with green coloured enamel. The wooden hand grip is painted dark green. The kerosene (spirit) container is a chrome metal cylinder with a flat bottom and top. The top has a small filler/air plug is located on the top side. There are two control knobs located next to and under the metal cylinder. The close to the cylinder is a lock which locks the top lid of the iron and the other knob controls the airflow to the heater rodOn the base of the handle "PEERMAN" and below this P/46, C.I. Thomas & Son Pty Ltd household, ironing, domestic kerosene, dry cleaning

At the time of manufacture, circa 1940's, the first aid treatment for snake bites, was to lance(cut) open the bite, wash it out and apply a ligature or tourniquet between the bite and the heart. This method was abandoned later after scientific evidence suggested that it was better to stop the blood system from carrying the poison to the heart (pressure immobilization). Australian snakes do not have long fangs therefore deep incisions into main arteries is rare. This research took many years to develop therefore the information supplied with the "Sanax" kits of this era is well outdated. Rural areas were more attuned to the possibilities of snake activity on farms, in sheds and in out houses and farm homesteads. This was not the case for mainly city and large townships environments. The mice plagues in wheat areas during the warmer month s has always been a high risk time for encountering snakesThese snake bite kits were issued to workers on the Kiewa Hydro Electricity Scheme. Some of these snake bite kits were kept at doctor's surgeries e.g. Bogong Village, House 13. The kit was carried by bushwalkers, scouts, farmers and high plains cattlemen. This item is of significance because it demonstrates the main dangers faced by all rural industries and towns, especially remote areas, and the portable remedies that where required as a necessity of the Australian bush environment. This item was in use at a time when the air ambulance and rescue facilities were not in existence and remote locations were more isolated and the availability of anti venom was hard to obtain locally.This item is a red coloured cardboard box(250 - 300 g/m) with white writing and containing the following 12 items. 7 clear red coloured capsules, 2 opaque red plastic capsules, 2 wooden capsules and 1 brass screw on capsule. The capsules are divided into two sections (compartments) horizontally. Each compartment has a screw lid. One compartment contains a lancet (for piercing the snake bite) and the other compartment contains the "Condy's" crystals compete with tightly rolled instructions.On top of the pull up lid, and flanked by two coiled snakes (at the strike position) is printed: "Trade Sanax Mark" below this " SNAKE and SPIDER BITE OUTFIT" and below this with instructions for use". Front side: "Sanax snake and spider bite outfit" underneath "Nepean Highway Morabbin" The later printing has been severely scratched but decipherable. The back side of the box has "Note to the retailer" and due to wear no more of the writing can be read. Each side of the box is printed "SANAX" snake, spider, first aid, kiewa hydro scheme, portable medical supplies

Pipe smoking has been in vogue for centuries, and in Australia it was a symbol of the "discerning smoker" such as the landed gentry, men of professional status or student. This pipe, however,of the "corncob" style, would have suited the younger professional or student/undergraduate(male or female) of the mid and late 1900s because it was relatively inexpensive to purchase and was regarded as a "beginners pipe". It is the type of pipe well suited to the rural backdrop. In the late 1900s, with the health related restrictions placed on public smoking these tobacco pipes were not immune from the legislation, and even though the pipe smoke was not as offensive as cigarette smoke it still came under the umbrella of smoking. Pipes were also used in the process of inhaling illicit drugs i.e. marijuana, but this use was limited to a very few. Smoking in the second millennium is being phased out as a social habit in Australia but may affect the few "private" smoker and has, as the United States prohibition era (alcoholic drinks) did, spawn an illicit trade in cheap contraband tobacco.This type of pipe lends itself well to the rural setting of the Kiewa Valley and although it is a bit rough in appearance its corncob barrel blended into the environment. The Kiewa Valley region was up until the late 1900s part of the Australian Tobacco Industry and the levels of men smoking pipes was enhanced by the ready supply, "off the fields", of tobacco leaves and the attitude to city based smoking restrictions was one of resentment.This pipe has a straight stem and its "style" is corncob. Originally made from corn cobs the pipe was light in weight and easy to hold in the mouth. The pipe has a permanent filter and a black coloured tin band at the stem/shank junction. The stem fits into the wooden shank which is fastened into the bowl. The stem is made from clear plastic (orange in colour). This stem is longer(70mm) than the shank(45mm). Both are horizontal and extrude 7mm from the bottom of the bowl.tobacco, pipe smoking, smoking accessories

This tool belonged to Ernest Brighton Phillips, a Warrnambool furniture maker. Ernest Phillips (1875-1924) was born in Warrnambool and learnt his carpentry trade at the Warrnambool Box Works. In the late 1890s Phillips established a furniture store at the corner of Liebig and Koroit streets and by the early 20th century he had the largest furniture warehouse and factory in Victoria outside of Melbourne. His products were sold all over Australia. Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today this property is the site of the residential complex for senior citizens known as ‘Heatherlie’. This tool is of considerable interest as it belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th century and the beginning of the 20th century. It is also of interest as a good example of a tool that was in use 100 years ago. This is a small tool with a wooden handle. The top part of the handle that screws in is missing. The tool is attached to the handle by a brass ring and a screw and the tool itself is a thin nail-like piece of metal with a small metal piece at the end in the shape of a star with six points. This end piece gouges out a hole or a pattern in wood or other hard material. The tool belonged to Ernest Phillips and his name is stamped on the handle. Three oblong-shaped metal nails were also with this tool but were not necessarily used with it. ‘E. Phillips’ernest phillips, history of warrnambool

This item is an example the skill and craftmanship of early settler families who of necessity were self-reliant.Bamboo shelves (3 shelves + top) with brown vinyl padded top. Insides are wallpapered with an embossed paper of cream flowers on dark brown background. Wooden sides are covered with same wallpaper which has been painted over tan . There seems to have been a door originally attached as there are two hinges, top and bottom, on right hand side. There are 4 legs angled outwards with stays - all made of bamboo. Back and shelves appear to be slatted timber. Sometimes called a "whatnot".furniture-shelves-handmade

Model eyes were used by students to practise skills of ophthalmoscopy and retinoscopy. This item shows more variety of fundus view and refractive state than most.This fine example is preserved in excellent condition, perhaps through lack of use. It is the most complex of the five model eyes in the collection.Cased metal model eye for teaching ophthalmoscopy and retinoscopy. 17 numbered interchangeable fundi illustrating various pathological conditions. Double cell lens holder in front can hold lenses for retinoscopy. Axis scale on front. 6 lenses provided to simulate various refractive states. Rotating disc changes between 3 pupil sizes. Model eye, fundi samples & lenses enclosed in snap closing wooden case, covered in black leatherette and lined with burgundy velvet.Inside case:'F.DAVIDSON & Co,/ 29 GREAT PORTLAND STREET,/ LONDON, W/ DUNN'S MODEL EYE'optometry, ophthalmology, model eye, teaching, ophthalmoscopy, retinoscopy

Frank Wright was a renown resident of Smeaton, where he was born on 2 August 1901. He lived at Laura Villa, and attended Smeaton State School. His father William was a gold miner and his mother's name was Sarah. Their family won many singing and instrumental awards. Frank was tutored by Percy Code and was awarded a gold medal for the highest marks in the ALCM examinations in the British Colonies at the age of seventeen years. He became the Australian Open Cornet Champion by the age of eighteen. A year later, Frank conducted the City of Ballarat Band, and later the Ballarat Soldiers’ Memorial Band. He formed the Frank Wright Frisco Band and Frank Wright and his Coliseum Orchestra. These bands won many South Street awards, and Frank as conductor won many awards in the Australian Band Championship contest. In 1933 Frank Wright sailed to England to conduct the famous St Hilda’s Band and was later appointed Musical Director of the London County Council, where he organized many amazing concerts in parks, in and around the London district. He was made Professor of Brass and Military Band Scoring and conducted at the Guildhall of Music and Drama. Frank was often invited to adjudicate Brass Band Championships around Europe, in Australia, including South Street and in New Zealand. The Frank Wright Medal at the Royal South Street competition is awarded to an individual recognized as making an outstanding contribution to brass music in Australia.Black and white photograph of an ornate bandstand built on a grassed area and set high with seven wooden steps leading up to the platform. Under the domed roof, wrought iron lacework extends between the six supporting columns and an ornate, waist-high lacework balustrade encloses the space. At ground level, the bandstand is enclosed by a fence and in the background are leafy trees. Within the bandstand a brass band can be seen performing. The band is the St. Hilda's Band with Frank Wright as its conductor. The place is Windsor.Written in pencil on the back - St. Hilda's, Frank Wright Conductor, Windsor, 24/5/34frank wright, conductor, brass band, st hilda's band, windsor, bandstand, wrought iron lacework

Piece of linen attached at top and bottom with wooden rails. Top half of linen has a paper map of Ballaarat Province and Surrounding Municipalities directly attached to it and reads 'Ballaarat Province' in red ink which outlines the greater Ballarat area with surrounding municipalities shown in blue. Scale is '8 miles to 1 inch'. Bottom half is drawn directly onto linen and depicts Ballaarat City Boundary including street names. 'Scale about 20 chains to 1 inch'.ballarat electorate, map, ballaarat province, ballarat to buninyong railway

The box is cleverly designed to give quick access to the parts inside, having a lift-up lid and a pull-down front. The components within appear to be a portable radio, power supply or power converter with batteries and a charger. The attached leather strap makes the equipment easily portable. The portable power supply is significant for representing part of the evolutionary change in communications. The unit connects the use of power and radio for communication with the ability to save the power in power packs or batteries, or to convert the power from one form to another.Power supply, portable, electric; circuits can be Parallel or Series. Batteries (6) fitted into a square wooden box. Box has two catches to secure the lid and two catches to secure the drop-down front. Holes have been drilled around the edges of the lid and the top of the base. Inside the front panel are two copper coils, switches and connectors. Leather carry strap attached. Stamped into the vertical panel are "parallel", "P", "H", "SERIES", CAVERTY", "LIGHT" :WEAK", "CHARGING" Stamped into the vertical panel are "parallel", "P", "H", "SERIES", CAVERTY", "LIGHT" :WEAK", "CHARGING" flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, portable power supply, power supply, battery box, battery, communication, radio, portable radio, battery powered radio, electronic instrument

The construction of the lifeboat ‘Warrnambool’ began 15th September 1909 and was completed almost 12 months later, 1st September 1910. It was built at the Government Dockyard in Williamstown, Victoria, along the lines designed by the Great Britain’s Royal Lifeboat Institution, and included whaleback decks fore and aft, mast and centreboard, and rudder and tiller hung from the sternpost. It could be propelled by both sail and oar. At that time Captain Ferguson was Chief Harbour Master and Mr Beagley was foreman boat builder when he and his fellow workmen built the boat. The boat was described as “… a fine piece of workmanship and does credit to her builders and designers…” It had all the latest improvements in shape, disposition of weight and watertight compartments, and it had space for a large number of people in addition to the crew. It appears that 'H Meiers' whose signature, along with building dates, is pencilled on a concealed timber 'plaque' in the hull, was involved with the building of the lifeboat. It is interesting that the ‘Melbourne Directory’ of 1911, published by Sands and MacDougal, lists McAuley and Meiers, boat builders, Nelson Place foreshore, between Pasco and Parker Streets, Williamstown, (Victorian Heritage Database, ‘Contextual History, Maritime Facilities’), It is probably the company of the person whose name is inscribed on the lifeboat plaque. Flagstaff Hill’s documentation also mentions that the keel was laid at ‘Harry Myers, boat builders, Williamstown, Melbourne’ – the name ‘Myers’ can also be spelled ‘Meiers’, which could be the same person as the Meiers in “McAuley and Meiers” (as mentioned in genealogy lines of Myers). The new lifeboat, to be named ‘Warrnambool’ was brought to town by train and launched at the breakwater on 1st March 1911 using the Titan crane (the old lifeboat built in 1858, was then returned to Melbourne in 1911). This new lifeboat was stationed at Warrnambool in a shed located at the base of the Breakwater, adjacent to the slipway. A winch was used to bring it in and out of the water. The lifeboat ‘Warrnambool’ was similar in size to the old lifeboat but far superior in design, build and sea-going qualities such as greater manoeuvrability. The ‘self-righting, self-draining’ design was “practically non-capsizeable” and even if the boat overturned it would right itself to an even keel and the water would drain away. The hull was built of New Zealand Kauri, using double diagonal planking, laid in two layers at right angles, with a layer of canvas and red lead paint between the timbers to help seal the planking. It has “… plenty of freeboard, high watertight spaces between the deck and bottom… through which pipes lead…” The backbone timbers were made of Jarrah. The lifeboat Warrnambool was one of several rescue boats used at Port Fairy and Warrnambool in early 1900's. In late 1914 the Warrnambool lifeboat and crew were used to help find what was left of the tragic wreckage of the Antares, and were able to discover the body of one of the crewmen, which they brought back to Warrnambool. Between 1951 and 1954 the lifeboat was manned under the guidance of Captain Carrington. He held lifeboat practice each month on a Sunday morning, to comply with the Ports and Harbour’s request that lifeboats be manned by a strong and competent crew, ready for action in case of emergency. In the early 1960’s it ended its service as a lifeboat and was used in Port Fairy as a barge to help dredge the Moyne River, bolted to the Port Fairy lifeboat. Flagstaff Hill obtained the Warrnambool in 1975. In 1984 it was on display at Flagstaff Hill Maritime Village, Warrnambool. On 23rd May 1990 she was lifted from the water and placed in a cradle for restoration. The name ‘WARRNAMBOOL could be seen faintly on the lifeboat before it was restored. It was during the restoration that Flagstaff Hill's boat builder discovered the 'plaque' inside the hull. A copy of the blueprint plans has the name “V.E.E. Gotch” printed on it. His advertisement in Footscray’s ‘Independent’ newspaper of Saturday 11th May 1901 states he is “Principal and Skilled member (Naval Architect) to the Court of Marine Inquiry of Victoria and holds classes for naval architectural drawing and arithmetic.”The lifeboat WARRNAMBOOL is significant for its half century service to the local community as a lifesaving vessel. She was also used to help retrieve the body of a shipwrecked crew member of the ANTARES. Lifeboat "Warrnambool", a wooden, clinker hull, 'self-righting, self-draining design, single mast, pivoting centreboard. Complete with sail and yardarm. A 'plaque' was found inside the hull of the lifeboat, made of untreated wood, disc-shaped with one straight edge (Diam 15.5cm), inscribed by one of the boat builders in pencil script "Life Boat Start building / 15/9/09 - complete 1/9/10 / (signature looks like H Meiers) / Boat Builder)."'Plaque' inside body of boat is inscribed in pencil, script writing "Life Boat Start building / 15/9/09 - complete 1/9/10 / (signature looks like H Meiels) / Boat Builder)." flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lifeboat, life boat, vessel, life saving, 1910 vessel, port fairy, boat builder plaque, rescue boat, beagley, williamstown, government dockyard, v.e.e. gotch, royal lifeboat institution, captain ferguson, meiers, nelson place, non-capsizeable, self-righting, titan crane, double diagonal planking, captain carrington, barge, antares, self righting, crew of twelve, capacity of 30 survivors

This compass is the type used by an artillery unit of the Australian Military Forces during World War 2 and made by J W Handley. Although having owned the factory site since 1935 at 657 Victoria St J W Handley began to produce various items for the Australian Military forces after purchasing and expanding the factory to 655 Victoria St. It appears that he, or some one else may already have been occupying the site for industrial purposes, such as (Manufacturing, Foundry and Electroplating) since at least 1929. J W Handley Pty Ltd was actively producing items for the Military during the war years, a newspaper article from 1939 shows the factory in production and employing 420 people during 1939. J W Handley after the war moved into producing other non military items including a range of fishing reels. The company ceased trading in 1987 and was deregistered as J W Handley Pty Ltd in 1990.The item demonstrates the industrial capability of Australia at the start of World War 2, this item is actively sort by collectors of Australian Military memorabilia and represents a time in Australian history when the country was at war and the general population was concerned about an invasion from Japanese forces. It also therefor is of social significance as many Australians served in the Military forces at that time and the item is complete and in very good condition.A plane table compass, sometimes referred to as a trough compass, used by surveyors and artillery crew to accurately establish magnetic north. The compass is precision machined of brass material with a long needle to ensure accuracy. The compass scale is marked with a centre zero (for magnetic north) and graduations indicating plus and minus five degrees. The compass is housed in a protective wooden case with a sliding lid. The lid has a brass slide which locks the compass needle during periods when the compass is not in use.J.W.H./V Mark 11 D�D. Made by J W Handley Richmond Melbourne, Victoria. Serial number 1333 on boxflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, trough compass, navigation instrument, surveyor's instrument, j w handley, artillery, australian army, trough, plane compass, world war 2

Dr Polk was one of the first Doctors to set up a medical practice in Melbourne and attended patients in the Brighton and Moorabbin area c1850. His Grandson Mr C. Bland donated the cabinet to CMHS.This portable cabinet with writing board was used by Dr Polk , one of the first Doctors to practice medicine in Melbourne c1850 .A small, wooden portable cabinet with 3 sections that belonged to Dr Polk GP c1850. Two side cabinets that lock together by grooves on inner sides, and a flat writing board that sits on a shelf at the top of the inner sides. One of the cabinets has 4 drawers, one of which has a lock. The other cabinet has 1 drawer and a cupboard with a door lock No Keys are available, The cabinet is decorated on the outer surfaces by inlaid bamboo squares with metal decorative hinges and handles and at the corners on the door. polk dr, bland c. melbourne, medical practitioners, moorabbin, brighton, pioneers, early settlers, market gardeners, dairymen, farmers,

Black and white photograph. Machinery in box in factory. Partially unpacked machinery in wooden crate (top and front removed). Inscriptions: 'MP 207', 'B 226, 50, 4' on back. 'Cohn Bros No. 1, 24 head filler' typed on back. 'Received 14 Sep. 1950' (rectangular rubber purple stamp), 'Butlers (Australia) Pty Ltd, 18-24 Allen Street, Pyrmont, Sydney' (oval rubber red stamp). 'MP 207', T&B L corners.topic, objects, machine, 2000.525.01, 2000.524.01, 2000.532.01. 2000., 526.01, 2000.530.01, 2000.533.01, 2000.527.01, 2000.531.01

Black and white photograph. Machine in crate (two sides and top of wooden crate removed). Inscriptions: on back 'Cohn Bros No. 3, single head crowner. 'Received 14 Sept. 1950'(rectangular rubber purple stamp. 'Royal Historical Society of Victoria, Bendigo Branch' (circular rubber blue stamp). 'Butlers (Australia) Pty Ltd, Sydney, Allen St, Pyrmont', (oval rubber red stamp), 'MP 210', T & B L corners at back. 'B 226,50,1' on back.topic, objects, machine, 2000.525.01, 2000.526.01, 2000.529.01, 2000.530.01, 2000.531.01, 2000.532.01, 2000.533.01

Black and white photograph of large machine in box. Front and top of wooden crate removed). Inscriptions: on back 'MP 206', T & B L corners. '226/50/14', 'syruper, Cohn Bros, No. 2 case' typed on back. 'Butlers (Australia) Pty Ltd, Sydney, Allen St, Pyrmont' (oval rubber red stamp), Received 14 Sep. 1950' (rectangular rubber purple stamp), 'Royal Histo5rical Society of Victoria, Bendigo Branch' (circular rubber blue stamp).topic, objects, machine, 2000.527.01, 2000.530.01, 2000.523.01, 2000.529.01, 2000.531.01, 2000.533.01

B+W photo on cream board. Photograph of eight gentlemen three at the back standing, five in the front row seated on bentwood chairs. The photograph is taken outside a wooden building with two windows . Possibly, A.N.A. Inscription: On back, Photographer's stamp 'W.H.Robinson/Photographer/Mundy Street Bendigo'. RHSV on back, Bendigo branch, stamp on back. Written in ballpoint pen, 'Seated Barkly Hyett, Sir John Quick, J.H.Curnow, Angus Mackay', 'Mayor' under the name J.H.Curnow.W,H.Robinsonperson, group, possibly a.n.a

1.. Grandfather Colgan standing in Military uniform with 2 medals 2.. Mother and father Colgan ( of Miss Colgan ) mother in long black dress, lace robe, sitting holding umbrella. Father in black suit, white shirt, black tie, white handkerchief in pocket, top hat, standing holding umbrella. 3.. Brother of grandfather Colgan ( Miss Colgans great-uncle ) sitting in military uniform with 2 medals. Ornamentation on wooden frame with grey mount, under glass.Bartlett Bros Bendigo & David Wood Sth Melbourneperson, family, colgan family portrait

A clear glass Cohns 26 Oz soft-drink bottle. The Bottle has a painted Red and white label on the neck as well as on the body. The neck label says 'Drink Cohns Cold'. The main label has a Logo with a Kangaroo head under a crown and slogan 'Quick to Quench' wavers across a red shield containing the words Cohns, Since 1857. Underneath the main label is ,26 Fl. Oz.' Housed in wooden Cohns Soft-Drink crate Item # 7322Cohnsfood technology, bottles

Okey, J M Leather Bootmaking Tools and Company Stamp. An open Wooden box of assorted Bootmakers 'Leather working'Tools.(Some appear hand-made')Some tools seem to be chisels, cutters, crimpers etc. The box is approx. 30cm x 15cm x 15cm. These include a metal Stamp that creates an oval-shaped label. 'John M Okey., Boot & shoe-maker, Kangaroo Flat'. Also included is an 'Ivory?' Chisel. Donated by 'Mr Reed' 7.8.69.

The Skylark 4, the final in the Slingsby Skylark series, dates from 1961. The design heralded a trend towards the use of plastics in the construction of gliders. Slingsby incorporated GRP (glass reinforced plastic) panels to achieve a streamlined fuselage nose and cockpit area while retaining the more traditional wood techniques for the rest of the aircraft. Another notable feature was the smooth wing surface that was obtained using a Gaboon ply skin across the ribs. Best glide performance of 1:33 was found to be comparable with the early full GRP glider designs. The Museum’s example (VH-GTB – C/N 1382) was built in 1963 and originally owned by Chuck Bentson of the UK. It was brought to Australia in 1967 by Jeremy Picket-Heaps and flown at various places including Benalla, Cooma and Gundaroo. In 1970 the glider was transferred to the New England Soaring Club. Many flights were made from Armidale and Bellata in Northern New South Wales. On one occasion, the glider was kept aloft for 8 hours 45 minutes and on another the pilot took it around a 500 kilometre triangle in nearly 8 hours. In 1980 it was sold to Ralph (“Feathers”) Crompton and was flown extensively in South Australia until 1988. The final owner before the glider was given to the Museum in 2004 was Ross Dutton of Melbourne. The last recorded flight occurred in 1992. The glider at that point had logged over 2000 hours flying time from about 2000 launches. The airframe is currently being restored to flying condition. Technically this aircraft represents the state of the art at the stage that sailplane design was changing from traditional wood construction to composites (GRP) The Slingsby Skylark 4 is high wing single seat sailplane of mainly wooden construction with plywood and fabric covering. However, the cockpit and forward part of the fuselage consists of glass reinforced plastic which was innovative at the time that the type was designed. The cockpit provides for a semi reclining position for the pilot protected with a full Perspex canopy. The wings are made up of a centre section with constant chord and tapered wing tips. The aircraft has a conventional arrangement for the tail stabiliser / control surfaces. The sailplane bears construction number 1382 and is registered in Australia as VH-GTBaustralian gliding, glider, sailplane, skylark, slingsby, bentson, picket-heaps, crompton, new england soaring club, dutton

Large round cedar cased wall clock with black hands and Roman numerals on a white painted metal dial pan. Time only with a chain driven fusee movement, brass bezel with flat glass. 1 side and 1 bottom inspection doors, top and bottom wall securing hooks, front of clock secured to case with wooden pegs. Brass pendulum with circular brass bob, rating nut and suspension spring. Written on clock face 'Joseph & Co., Sandhurst' (Bendigo).Joseph & Co Sandhursthorology, clocks, joseph & co

Object. Six paper covered wooden blocks. Childrens toy, not a complete set.(meant to be 12). Six different pictures can be made by changing the blocks around. Also one picture of one puzzle depicting two children in a garden scene near a pond. Picture appears to have been pasted onto the back cardboard of a notepad. On the back of picture - Joyce, Joyce Brown is no good, Chop her up for firewood, If she is no good for that, Give her to Mick Bennett.toys, general, blocks, wooden blocks paper covered

The photograph that appears in this frame is a copy. The original is catalogued at 01314. Sgt David Hamilton Pruden, 404, enlisted from Newry and was killed at Koster River in the Trasnvaal on 21 July 1900, and was buried at Rustenburg cemetery. He is commemorated in a large tablet in the Stratford Mechanics' Institute. This photograph originally hung in the Stratford Mechanics' Institute. A framed sepia copy photographic print of a head and shoulders portrait of a young man in dress uniform of the Victorian Mounted Rifles, labelled Pte D.Pruden and presumed to be David Hamilton Pruden, who died in Africa during the Boer War. The frame, of crossed wooden bars with decorative metal at each crossing, appears to be commercially produced. Backing support for the frame is a section of an 1893 calender for an unknown insurance firm, agent J.B Kelly at Stratford, which has been detached for separate cataloguing.boer war 1899-1902

Sepia colour postcard. Wooden frame surround, image enclosed in oval shape within. Written on bottom of card ' St. Andrew's Presbyterian Church and School Bendigo' Image shows one storey building on LH side, facing street. Building has central doorway, two arched side windows. Other building and church centre and right. See link below for heritage details of buildings: https://ohta.org.au/organs/organs/BendigoStAndrewsUniting.html Receipt number 355/16bendigo, business, carwardine soap and candle

Certificate given to Thomas Flanagan for his 23 years of service and residency in Tatura. Signed by A3 size certificate, cream coloured paper with a brown border 2 cm in from the edge. Inside the border are flowers surrounding an of white space which has a letter of thanks printed in black ink. Across the top of the white space is a curved ribbon which has "Thomas Flanagan Esq. JP" printed in fancy writing. The certificate has a brown mount around it and then framed in a brown wooden frame with glass. There is a gold rim of 2 cm between the frame and the brown mount.Thomas Flanagan Esq. JPthomas flanagan, tatura

Ex-president's Certificate from the Australian Natives' Association with details of recipient's details in central circle - an Australian emblem on the top - female figure on one side of circle holding flag in one hand and male figure on other side / symbolising bushman? Smaller circle underneath encloses star with map of Australia in centre and six state emblems in points. Scenes either side depict native Australian first fleet and Canberra Parliament House. All decorated with wattle and in a wooden frame.Certificate reads: Branch No 311 / EX PRESIDENT'S / CERTIFICATE / This is to certify that / J.W. Read / occupied the position of President of / this branch from 20.11.45 / to 25.2.47 / faded signature of President / faded signature of Secretary. australian natives' association, j.w. read

The pram is light in weight. Made of black vinyl with a metal frame. A handle with wooden grips is used to push the pram from behind. It has four spoked wheels with rubber tyres. The hood can be unlocked and folded down as can the handle which folds over the top of the pram body for ease of transport. The pram contains a soft kapok fitted mattress with white heirloom lace frilled cover and a soft pillow covered with a white cotton pillowcase with a chicken and flowers embroidered on it.None