Brown cardboard box with sliding insert containing hypodermic needles. On the front of the box is a buff coloured manufacturer's label with rust coloured print. On the rear of the box is a white coloured manufacturer's label with rust coloured print. The box has a thin strip of rust coloured plastic all the way around it. The insert has allocation for six needles but there are only four present.Stamped in black ink on front of box: EXPLORING / 19 B.W.G. 3 INCH •Stamped into metal at flat of connector: ARNOLD / SShypodermic, needle, syringe, john bell & croydon, arnold & sons

On the 19 February 1942, 242 Japanese aircraft, in two separate raids, attacked the town of Darwin, ships in the harbour and the town's two airfields in an attempt to prevent the Allies from using them as bases to contest the invasion of Timor and Java during World War II. Darwin was lightly defended, relative to the size of the attack, and the Japanese inflicted heavy losses upon Allied forces at little cost to themselves. The two Japanese air raids were the first, and largest, of more than 100 air raids against Australia during 1942–43.The Bombing of Darwin, also known as the Battle of Darwin, on 19 February 1942 was the largest single attack ever mounted by a foreign power on Australia. The urban areas of Darwin also suffered damage from the raids and there were a number of civilian casualties. As a result more than half of Darwin's civilian population left the area permanently, before or immediately after the attack. Timber framed print of planes depicting the bombing of Darwin Harbour. Gold metal plaque - BOMBS OVER DARWIN Presented to Wangaratta RSL Limited Edition Print 234/1800 by James Baineswwii, bombing of darwin, battle of darwin

Allen CrescentColour Photograph Showing a Red Roofed house taken from across the road on a angle prior to demolition. A metal sign on the fence reads "Mick teh Wrecker is here ( the second line is unclear) Pay cash (the last line is unclear).

Photo 0028 Steel construction with Wooden Roller Steel Wheels,Rachets & Wheel. Wood Handle Sides Ornate E.W Bank Jewel Rd No 32 6684 Metal Bar over Rollers " Wring at the ends of Roller--hand to finger at 24

Grey Ferguson tractor restored to working order with a detachable grader blade. A rollover protection bar has been added to comply with modern regulations for safety. Three point linkage and 3 new tyres. Club permit registration. Metal plates on front and sides "Ferguson". Serial No. plate on steering column mount etched No. "533? "........." Henry Ferguson / ........ / TE14 "351?".rural industry - farm machinery;

This is a suitcase known as a Gladstone bag. It is named after William Gladstone (1809-1898), a four-time Prime Minister of England. Gladstone bags were first produced by Edward Cole in London in 1854. This item has no particular local provenance but bags such as this one were commonly used, mainly by men, for business and sporting purposes. As it was compact and stored quite a lot of material in its deep interior, it was a popular choice for men travelling by public transport to the workplace or to sporting events. This Gladstone bag is retained for display purposes as an example of a mid 20th century suitcase.This is a small suitcase, called a Gladstone bag, made of stiffened brown leather built over a rigid metal frame. It has a leather handle on top of the metal frame and a metal lock on the side of the frame. There are metal clips to enclose the ends of the frame. There are metal straps attached to the sides of the case. Inside, the bag is lined with light brown cloth and there are two pockets on one side. The metal parts are somewhat rusted. warrnambool, vintage suitcases, gladstone bag, history of warrnambool

This needle case, probably dating from early in the 20th century, contained knitting needles of various sizes and those needles were probably used in sets of four to knit such items as socks. In the early to mid 20th century many items of clothing and furnishings were hand knitted with the yarn mostly favoured being wool. Today knitting is a hobby taken up by a few and clothes that were once knitted are now bought ready-made. This needle case is of antiquarian interest and is retained for display purposes. This is a cylindrical metal case with a gold-coloured marbled pattern around the case and closed metal ends. One metal end swivels around to reveal four compartments that once contained metal knitting needles. One of these needles remains. The case has printing on both metal ends and on the case body but much of this is now indecipherable. The Crescent Case Best English Knitting Instructions …. antiquarian household objects, history of warrnambool

Brought to Australia in the 1950s by Dutch migrants. These coffee grinders were in common use in the 1940s amd 1950s as an altrrnative to wall-mounted coffee grinders. They were operated by clamping the grinder between one' knees. The drinking of coffee is a highly social ritual among Dutch people. They brought this ritual with nthem to Australia as is evidenced by the number of coffee grinders and other coffee psraphernalia donated to the DAHC.Coffee grinder, wooden body, metal top. Wooden drawer in bottom, metal contaner for ground coffee. Metal top has circular raised section which has an opening with sliding lid to put in coffee beans. Metal handle with wooden knob in centre of top, connects with grinding mechanism inside metal top. Pe De on front above drawer.coffee grinder, kitchen ware

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. (Source: Wood Library Museum)Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. There is also a dome-shaped metal inhaler with a "whistle tip" type connection to the mask. The mask is made of tan leather. There is also a metal ether measure for pouring the ether.Printed in gold leaf inside lid of box: MAYER & MELTZER [?] PORTLAND ST. / MAKERS •Engraved on side of inhaler: Mayer & Meltzer / London •Stamped on connector of inhaler: MAYER & MELTZER RN NO 212327 •Engraved on rear of inhaler: Clover's Inhaler •Printed in white on blue sticker: O.2.5A •Measurements have been stamped on the bottom of the inhaler. •Printed in black ink on mask: MADE IN ENGLAND •Stamped on metal connector inside mask: 6 •Printed in black ink on white manufacturer's label on glass bottle: ETHER PURUS '720 / H. Francis & Co., Melbourne.clover, joseph, mollison, crawford henry, george bankin, mccaul, kevin, royal women's hospital, coroner, freemason, surgeon, gynaecologist, obstetrician, mayer & meltzer, francis & co, melbourne, ether purus

This tub probably dates from the early to mid 20th century and would have been a common item in households in those times. It could have been used for laundry items or for other washing processes in the kitchen. Wash houses in the early to mid 20th century were usually separate buildings or sheds outside of the house.This item is retained for display and discussion purposesThis is an oval- shaped metal tub wider at the top than at the base. It has a ridged top, a strengthening metal band around the base and two metal handles. It is somewhat rusty.vintage household items, warrnambool & district historical society collection

The handle of this hammer looks to be home-made and to have been used as a household tool. Most homes still today include a small hammer as a household item. The provenance of this hammer is unclear but it possible that it is the hammer found at ‘Guthrie’, a house in Merri Street, Warrnambool that was demolished. ‘Guthrie’ was the home of the Dickson family, prominent in Warrnambool business circles. James Dickson, with his friend John Cramond, established a store in Warrnambool in the mid 19th century and this department store, known as Cramond and Dickson, was a prominent business in Warrnambool until its closure in 1973. James Dickson’s son and his family lived at ‘Guthrie’ and the hammer may have belonged to the Dicksons or another family connected to that property. This hammer has a metal head and a wooden handle. The top of the handle has a metal screw inserted and small slivers of the wood are missing. The end of the metal section is much worn.household tools, history of warrnambool

The handle of this hammer looks to be home-made and to have been used as a household tool. Most homes still today include a small hammer as a household item. The provenance of this hammer is unclear but it possible that it is the hammer found at ‘Guthrie’, a house in Merri Street, Warrnambool that was demolished. ‘Guthrie’ was the home of the Dickson family, prominent in Warrnambool business circles. James Dickson, with his friend John Cramond, established a store in Warrnambool in the mid 19th century and this department store, known as Cramond and Dickson, was a prominent business in Warrnambool until its closure in 1973. James Dickson’s son and his family lived at ‘Guthrie’ and the hammer may have belonged to the Dicksons or another family connected to that property. This hammer has a metal head and a wooden handle. The top of the handle has a metal screw inserted and small slivers of the wood are missing. The end of the metal section is much worn.household tools, history of warrnambool, hammer

This tripod is part of the Cirkut Camera set used by William Anderson in Lorne A collapsible wooden and metal tripod. On top of the three legs is a circular geared metal plate with numbers surrounding it. On top of this is a metal plate with piece of wood and screw to attach the cameraCrown Tripod number 2 patented June 23 1903, Folmer and Schwing, Rochestercamera, lorne, william anderson, tripod

This tripod is part of the Cirkut Camera set used by William Anderson in Lorne A collapsible wooden and metal tripod. On top of the three legs is a circular geared metal plate with numbers surrounding it. On top of this is a metal plate with piece of wood and screw to attach the cameraCrown Tripod number 2 patented June 23 1903, Folmer and Schwing, Rochestercamera, lorne, william anderson, tripod

World War One, uniform, Australian, AIF, AFC, Australian Flying Corps, 37th Battalion, Mt Evelyn, Ascot Vale, First World WarThe significance relates to the fact it is a WWI item pertaining to the military service of Ernest Pearson MM during the Great War.Brown leather ammunition belt. Metal buckle that joins belt. Leather/metal buckle & strap that is attached to front of belt. Metal pins attached along leather belt. marked into leather - 1 1900ernest pearson, world war one, aif, first world war

Two large pieces of wood with a wide holed metal piece at one end. Large corkscrew metal pipe attached to metal tuning piece which is screwed into the wood.trades, carpentry

Used to protect meat from the elementsOval mesh metal meat cover with metal rim at base, solid metal lid, handle at top and one side, other handle missing, evidence of patching and soldering

A pair of Dayton racquetball racquets, with metal frame and metal stringing, and fine-grooved wooden handle. Materials: Metal, Wood, Paint, Plastic, Adhesive tape, Ink, Gluetennis

A tennis net post, with detachable wood/metal upper from metal base. Inscription around base: SLAZENGERS/LONDON/COLONIAL. Materials: Metal, Wood, Paint, Ropetennis

Metal plate photographic negative image of a T.E. Robinson. Metal plate fixed to wood block. Also states 'L. Tennis Annual Report'. Materials: Wood, Metaltennis

Metal cutter used for cutting sample cloth squares.

Brewer's saccharimeter. Metal container with lid and paper document

Safe metal box shaped object with metal handle keyhole & key. Black Circa 1880flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This tin or trunk came from the old Kepler Street, Warrnambol Tait legal offices. The tin originally held legal documents connected to John Hyland (1830-1908). Irish-born John Hyland came to the Warrnambool district in 1850 working as a mounted trooper and a rate collector. He then farmed in the Mortlake district for some years before returning to Warrnambool and setting up as an auctioneer and stock and station agent. He was a Warrnambool Councillor (1880s and 90s) and Mayor (1891-2). His trunk of legal documents was first held by the lawyer, Henry Parrington, operating in Warrnambool from 1888 to 1917 (1888-1900 Higgins and Parrington, 1900 Parrington and Tait, 1901-1917 Parrington). Following Hyland's death in 1908 Henry Parrington has used the tin to house his probate documents and when John Sym Tait purchased the Parrington practice in 1917 he has obviously taken over the Hyland trunk. This tin is of some considerable interest as a memento of past Warrnambool identities - John Hyland and Henry ParringtonThis is a metal tin, rectangular in shape. It has a ridged top, two metal handles and a key mechanism.John Hyland Esq. Parrington Probates & Deeds (keep)henry parrington warrnambool lawyer, john hyland warrnambool, john sym tait warrnambool lawyer

Plane tools for shaving wood date back to Roman times and are still in use today. This item is a vintage tool and could have been used in households or in businesses.This item has no known local provenance but is retained because of its age and interest as a hand tool from the past.This is a metal plane tool with an adjustable blade at the base and two screws for adjustment. The metal is much rusted.No. 113household tools, history of warrnambool, vintage tools

This badge is for a female and has been issued to a Warrnambool Racing Club member in 1956. Horse racing meetings have been held in Warrnambool since the early days of settlement and the Warrnambool Racing Club was formed in 1854. Meetings have been held at the site of the present racecourse since the late 1850s. The chief event on the Warrnambool racing calendar is the annual three-day May Racing Carnival, with the main event being the well-known Warrnambool Grand Annual Steeplechase.This badge is retained as an example of lady’s badge issued to members of the Warrnambool Racing Club in the mid 20th century.This is a silvered-coloured six-sided metal badge with embossed initials and printing and a metal clip at the back.WRC LADY Season 1956-57 B545 Stokes Melb. warrnambool racing club, badge, history of warrnambool