Showing 3092 items
matching makers
-
Warrnambool and District Historical Society Inc.
Souvenir, Victoria Fine China, Miniature mug Warrnambool Thunder Point, C 1940
Warrnambool has been an attraction for tourists for over 100 years. It has been popular as a coastal resort and today the winter whale season brings more tourists. In the late 19th and early 20th centuries Warrnambool was promoted as a spa and health resort, partly because of its hot and cold sea water baths and partly because of its bracing climate and attractive coastline. Thunder Point, depicted on this item, has been a popular visiting spot for tourists for many years. Buying a high quality ornament such as this one was a popular activity of tourists in the mid 20th century. Tourists today buy souvenir items but the choice and range vary from what was available 80 years ago. This item is retained as an example of a local souvenir bought by tourists in the mid 20th century. This is a small white china mug with a gilt edging or strip around the top opening rim, the base and the handle. There is a colour image of a seascape in blue, yellow and black on the side of the mug and the maker’s name on the base.‘Victoria Fine China’tourism in warrnambool, souvenir china items 20th century, history of warrnambool -
Warrnambool and District Historical Society Inc.
Souvenir - Souvenir Towel, 1934
This towel is a souvenir of the Centenary of Victoria celebrated in 1934. It marks the centenary of the officially-recognized first permanent European settlement at Portland with the arrival of the Henty families in 1834 in Victoria (then known as the colony of Port Phillip). European settlement occurred at Melbourne in the following year. This towel is one of many souvenir items produced in 1934.This towel is of minor interest as a memento of the centenary of Victoria. It is a comparatively rare souvenir of that event as towels such as this would have been used and most would not have survived for nearly 90 years.This is a white cotton towel with a white fringe at both ends. There is a red strip down the centre of the back of the towel with red lettering in this strip down the front of the towel.The maker's name is stitched into one corner.Centenary 1934 Osmancentenary of victoria -
Tennis Australia
Puzzles, Circa 1950
Set of 3 jigsaw puzzles in a cardboard box. One of the puzzles depicts a tennis scene. Complete set. No maker name, but lid is printed with 'MADE IN USA'. Materials: Cardboard, Paper, Ink, Gluetennis -
Tennis Australia
Racquet, Circa 1987
A painted tennis racquet; composite materials; no visible model or maker markings. Marked post-maufacture with silver ink on butt: 'HB'. Materials: Metal composite, Plastic, Adhesive tape, Nylon, Painttennis -
Kew Historical Society Inc
Domestic object - Tea Cup, Saucer & Plate, Ridgways, c.1880
Item of family crockery donated by a Jean Woollard, KHS member, and Kew resident. Her family, residents of Kew since the 1860s, was highly involved in the political life of Kew. William Woollard was a councillor and mayor while Herbert Woollard was also a councillor and a member of the local Labor Party BranchGlazed earthenware tea cup, saucer and plate with transfer printed decoration, using the 'Hawthornden' pattern by Ridgways. The underneath of each item bears the maker's mark and a pattern registration date for April 1880.dinnerware, ridgways (1879-1920), earthernware, staffordshire ceramics, hawthornden pattern - reg. april 1880 -
Stawell Historical Society Inc
Photograph, Pierlots House Great Western 1920's
Charles Pierlot's house at Great Western. Build about 1900Garden Gully Rd, past Race Course, second house on left. Champagne maker for Hans Irvine. Photo possibly by Louis Grellet.winemaking -
Flagstaff Hill Maritime Museum and Village
Photograph, late 19th century
Loch Ard was bound for Melbourne in 1878 loaded with passengers and cargo when it ran into a rocky reef at the base of Mutton Bird Island, near Port Campbell. Of the 54 crew members and passengers on board, only two survived: an apprentice, Tom Pearce and a young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. The wreck of Loch Ard still lies at the base of Mutton Bird Island and much of the cargo has been salvaged. Some was washed up into what is now known as Loch Ard Gorge following the shipwreck. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. The photograph is significant for its association with the wreck of the Loch Ard. This wreck has been protected as a Historic Shipwreck since 11 March 1982, under the Commonwealth Historic Shipwrecks Act (1976) Flagstaff Hill’s collection of artefacts from Loch Ard is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register. The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the Loch Ard, which was one of the worst and best known shipwrecks in Victoria’s history. The Loch Ard collection meets the following criteria for assessment: Criterion A: Importance to the course, or pattern, of Victoria’s cultural history. Criterion B: Possession of uncommon, rare or endangered aspects of Victoria’s cultural history. Criterion C: Potential to yield information that will contribute to an understanding of Victoria’s cultural history. Black and White photoghrap of Thomas Pearce. Taken by the Photographic Society of Victoria. Registered copyright July 24th 1878. Reverse has printed maker’s information and a white adhesive label with hand writing on it.Label has hand writing “F-Ph 55/2-74” Printed green text “PHOTOGRAPHIC / SOCIETY OF VICTORIA / MELBOURNE / REGISTERED COPYRIGHT / JULY 24th 878” and “NONE ARE GENUINE UNLESS WITH / SIGNATURES THUS” and “PRESIDENT / VICE PRESIDENT / SECRETARY” flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, photoghrap, thomas pearce, photographic society of victoria, loch ard shipwreck -
Flagstaff Hill Maritime Museum and Village
Equipment - Diving compressor and helmet, 1944
Siebe Gorman & Company Ltd was a British company that developed diving equipment and breathing equipment and worked on commercial diving and marine salvage projects. The company advertised itself as 'Submarine Engineers'. It was founded by Augustus Siebe, a German-born British engineer chiefly known for his contributions to diving equipment. Siebe Gorman traded as an engineering firm for over 180 years from 1819 to 1999. The early success of the business was due to its founder, the Prussian immigrant Christian 'Augustus' Siebe (1788-1872). For business reasons, he applied for and was granted British citizenship in 1856. He was a gifted engineer who was able to translate theoretical problems into practical, working products. During the industrial Victorian period, the business traded as 'A. Siebe' at 145 High Street Holborn London, but in 1828 new premises were acquired at 5 Denmark Street, Soho. The family firm produced a wide range of manufactured goods including paper-making machinery, measuring machinery, water pumps, refrigeration equipment, and diving apparatus. Augustus Siebe specialised in submarine engineering early on and the company gained a reputation for the manufacture of safe, reliable diving apparatus. Augustus Siebe is best remembered for the development and manufacture of the ‘closed’ Diving Dress based on the ideas of Charles and John Deane, George Edwards, and Charles Pasley. Apart from some small modifications to valves and diver communications, the basic 12 bolt ‘closed’ diving dress remained relatively unchanged after the 1870s. Later company successes were also based on innovation, with new products that could be successfully developed and manufactured to high standards. This was largely attributed to the inventive nature, foresight, engineering, and entrepreneurial skills of Robert Henry Davis (1870-1965). In 1882, RH Davis joined the company of 'Siebe & Gorman' as a young 11-year-old office boy and he was to remain with the company until he died in 1965. Augustus Siebe retired in 1869 and handed over the company to a new partnership of Henry H. Siebe (1830-1885) and William A. O'Gorman (1834-1904). The new firm traded as 'Siebe & Gorman' (1870-1879) from premises in and around Mason Street, Westminster Bridge Road, Lambeth, London. The two partners soon recognised the potential of R.H. Davis and in 1894, aged 24, he became General Manager of Siebe & Gorman. Davis increasingly ran the company until the surviving partner (W.A. Gorman) died in 1904. The firm was disposed of to the Vickers (armaments) family and a new company 'Siebe Gorman & Co. Ltd.' (1905-1998) was formed. Under the chairmanship of Albert Vickers, R.H. Davis was kept on as Managing Director, and the company forged ahead. However, after WW1, the Great Depression caused manufacturing output and share prices to slump. In 1924 Robert Davis made a deal with the Vickers Board and acquired control of the company through majority shares. Under his leadership, the Siebe Gorman Company flourished and within time, four of his sons also joined the firm. The company gained a worldwide reputation for the manufacture of diving apparatus, decompression and observation chambers, and safety breathing apparatus of all types for use on the land, in the air, and under the sea (including mine rescue, tunneling, aircraft, diving, submarine escape and in other hazardous environments). Close research and development links with the MOD (especially the Admiralty), also provided a lucrative outlet for the company products. In 1932, Robert Davis was knighted by King George V, principally for his invention of the ‘Davis Submerged Escape Apparatus’ (D.S.E.A.). Siebe Gorman essentially remained a family firm from the beginning (under A.Siebe) until it became a public company for the first time in 1952. However, following WW2, British manufacturing stagnated through stifled investment and post-war austerity, and there was little innovation. Siebe Gorman's fortunes began to decline as an aging Sir Robert Davis failed to invest, or change the company's business and management practices. In 1959, Siebe Gorman was acquired by the “Fairy Group” and the ailing Sir Robert was made Life President. Consequently, nothing changed and the slow decline continued until Sir Robert's death in March 1965. Around 1960, Siebe Gorman acquired the diving apparatus manufacturer C E Heinke, and for a brief period, it manufactured some diving equipment under the combined name of Siebe Heinke. Around 1964, Mr E. 'Barry' Stephens was appointed as the new Managing Director to modernise Siebe Gorman. Changes were made, including a move to a new factory in Wales in 1975. The new company concentrated on fire-fighting breathing apparatus and escape equipment, and the move coincided with the loss of many of the older, traditional craft skills. Between 1985 and 1998, Siebe expanded through acquisitions, and several other companies were acquired. The Siebe Gorman (diving apparatus) company has therefore traded as A. Siebe (1819-1870); Siebe & Gorman (1870-1879); Siebe Gorman & Co (1880-1904); Siebe Gorman & Co. Ltd (1905-1998). (For information regards the diving helmet & Frank King see Notes Section at the end of this document)The items are very significant as a snapshot into marine history and the development of diving equipment generally especially that used for salvage operations before and during WW2. The company that made the equipment was a leading inventor,developer and innovator of marine equipment with its early helmets and other items eagerly sought after today for collections around the world. The items in the Flagstaff Hill collection give us an insight as to how divers operated and the dangers they faced doing a very necessary and dangerous job. Frank Kings' diving helmet and compressor (communication pipe stored separately). Compressor is hand cranked. US Navy diving helmet, Mark V. Two maker's plates attached. Made in 1944.On rear "WATER SUPPLY" On front 'PATENT" " Logo: Images (Lion, Crown, Horse, Shield within an oval) "SIEBE, GORMAN & Co. Ltd. SUBMARINE ENGINEERS, LONDON.flagstaff hill, warrnambool, maritime museum, great ocean road, us navy diving helmet, commonwealth government salvage, diving helmet, marine salvage, frank king, diver, siebe. gorman & co ltd, submarine equipment, diving equipment, communication under water, hand cranked, diving compressor -
Warrnambool and District Historical Society Inc.
Glass, Glass Tumbler (Kennedy)
This glass has been produced as a memento of the South West Bottle & Collectable Club Annual Display and Sale of 2016. The club has reproduced the logo of the 19th century Warrnambool chemist R.F. Kennedy because he was a prominent chemist and because his chemist bottles and jars have become so collectable today. Richard Frank Kennedy came to Warrnambool in the 1880s as a retail, wholesale and manufacturing chemist and his premises in Timor Street became one of the best furnished and stocked pharmacy businesses in Victoria. The lighthouse logo used on his bottles, labels, jars and advertising material was a well-known one throughout Victoria.Although this glass is not an original R.F. Kennedy item it is of interest as it shows how widely known Kennedy’s pharmacy business was and how he is still remembered today.This is a heavy-weight glass tumbler etched with the wording ‘South West Bottle & Collectable Club Inc’ and the image of an R. F. Kennedy lighthouse symbol. The glass has a stamp on the bottom with the maker’s name.‘R.F. Kennedy, Warrnambool’ ‘South West Bottle & Collectable Club Inc’ ‘Duralex 12, Made in France’. south west bottle & collectable club inc., r.f.kennedy, warrnambool -
Coal Creek Community Park & Museum
Button Accordian, Hohner Diatonic Accordion
Single row diatonic button accordion, black with floral decoration. 10 white keys on player's right, 4 on left. Speaker box on right. Maker: Hohner (Marcia Registrada), made in Germany. -
Ringwood and District Historical Society
Plaque - Cast iron machine badge, Engine maker's plate from former Ringwood Coolstore (1911 - demolished 1963)
Green cast iron engine plaque featuring maker's name mounted on varnished timber backing, retrieved by Ron Pullin for preservation by Ringwood Historical Society following demolition of Ringwood Coolstore in 1963.Marshall Sons & Co Ltd No 26759 Gainsborough & London -
Whitehorse Historical Society Inc.
Tool - Bee Smoker
Pender Bros began in 1892 in Maitland New South Wales who supplied beekeeping supplies to the local beekeepers and later to beekeepers Australia wide. In the early 1970s was the largest factory in the southern hemisphere. In the late 1970s Pender Bros sold the beekeeping business in the late 1970s to the workers of Pender Bros and the name changed to Pender Beekeeping. The business moved to Rutherford New South Wales. The business was sold and changed to Pender Beegoods around 1989. In late 2002 it changed hands again to Pender Beekeeping Supplies and moved to Cardiff, Lake Macquarie New South Wales.Metal cylinder with hinged lid with spout on top. Cylinder for containing smoking medium connected by hose (missing) to small bellows on base. Marked on base with Pender Bros Ltd Makers West MaitlandPender Bros Ltd West Maitland (New South Wales)bee keeping -
Bendigo Historical Society Inc.
Container - CLAY CRUCIBLE
Clay gold crucible used for smelting, assaying and refining gold. Inside of crucible discoloured with brown and pale green mark. Maker's name on side: 'Juleff, number 78, (location indecipherable) England.Juleffgold mines, mining equipment, gold crucible -
Flagstaff Hill Maritime Museum and Village
Domestic object - Sewing Machine and case, Joseph Wertheim, late 19th century
Hugo Wertheim (1854-1919), was a merchant and manufacturer and was born on the 12th July 1854 at Lispenhausen, in the German electorate of Hesse-Kassel, son of Meyer Wertheim and his wife Minna, née Heinemann. Hugo reached Melbourne in October 1875. He soon began advertising, from premises at 39 Flinders Lane East, as agent for his father's cousin Joseph Wertheim, a well-established manufacturer of sewing machines. Hugo returned to Germany where he married Joseph Wertheim's daughter Sophie Emilie (1864-1953) on 30 August 1885 at Frankfurt. the couple then came to Melbourne. In a short time, with extensive advertising, Hugo established a substantial business, selling sewing machines, bicycles, pianos and other mechanical devices, under brands such as Wertheim, Electra, Planet, Griffin and Hapsburg. He also mounted elaborate displays at agricultural shows and in 1901 at the Pan American Exposition, Buffalo, United States of America. O. C. Beale worked with him before setting up his own piano business in New South Wales. Hugo continued to own 25 per cent of one of Beale's companies, which became Wertheim's Queensland business. In 1908 Wertheim opened a large, innovative piano factory at Richmond, Melbourne, intending to produce 2000 pianos and player pianos annually, predominantly using Australian materials. In laying the foundation stone, Prime Minister Alfred Deakin observed that “few men with such opportunities for a life of ease would have embarked on such an enterprise” Hugo died of chronic hepatitis on 11 July 1919 at his home at South Yarra, his wife, two daughters and three sons survived him; Herbert Joseph (1886-1972), the eldest, continued the business. Rupert became a share broker and went on to represent Victoria in inter-State tennis in 1913-27 and Australia in Davis Cup matches against Czechoslovakia in 1922. The piano factory closed in 1935, becoming a Heinz food processing plant and in 1955, GTV Channel 9 studios and offices.Early Australians had to be self-reliant in regards to making and mending their clothes and utensils. This sewing machine was one of many items used that exhibit the skill and craftsmanship of the women in these early families. A sewing machine was a necessary part of each home and this item demonstrates how women of the time managed had to become self-reliant in the repair and making of their families clothes to make their household budgets go further.Sewing machine, Wertheim brand “ Syst 182” hand crank operated machine with folding handle, timber case and carry handle. Metal machine is painted black, with remnants of gold, red and green scrolls and floral decoration. Machine has base with inlaid measuring rule across front and 2 holes drilled through the base (perhaps for mounting machine to a bench). Machine tilts open, hinged on one side, after thumb screw is unwound, revealing machine’s workings and serial number. Base has a fitted round, concave, silver metal pin holder with lid that hinges open, and symbol pressed into lid; several pins are inside. Body of machine has brand name transfer across front and oval metal trademark disk on front. Metal sliding covers over footplates have stamped lettering. Timber machine case or cover includes an accessory box with sliding cover and metal hook and eye latch, and inside the box are 23 metal sewing attachments, a disc and a stick of black crayon with maker’s trademark on it paper cover. Workings of machine have seized up. The crayon wrapper has printed on it “For the wonderful Wertheim new family machine made in Germany ‘Syst. 182’”, and the maker’s symbol with “Trademark” beside it. Made for Hugo Wertheim.“WERTHEIM” transfer across front and back of machine body. Cover of pin holder has symbol ‘Wings above a shield’. Maker’s trademark on gold oval disc, “WERTHEIM / FRANCFURT” and picture of a dwarf with a hammer. Left footplate has script “Syst 182”, right footplate has stamp in oval shape “MANUFACTURED IN - - /SPECIALLY FOR / HUGO WERTHEIM” Serial Number “7501”flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, hand crank sewing machine, hugo wertheim, wertheim, clothing manufacturer, sewing, syst 182 -
Flagstaff Hill Maritime Museum and Village
Tool - Moulding wood Plane, Mid to Late 19th Century
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. John Moseley & Son: Records indicate that before 1834, the firm is listed at number 16 New Street, London and according to an 1862 advertisement the shop had been established in New Street since 1730, The Sun insurance records from the time show that John Moseley was the possessor of a horse mill in the yard of his premises, which means that some kind of manufacturing was taking place, as the mill would have provided power to run a saw or perhaps a grinding wheel so the probability is that he did not just sell tools, he made them as well. John Moseley died in 1828 and his will he names his four sons: John, Thomas, William and Richard. To complicate matters he also had brothers with the same first names; brothers Richard (of Piccadilly) and William (of Peckham Rye) are named as two of the executors. Brother Thomas is not mentioned in this will, but became a minister and was one of the executors of brother Richard’s estate when he died in 1856. From John’s will, we also learn that, although the shop was in New Street, he resided in Lympstone, Devon. The family must have had a house in that county for quite some time as both sons Richard and William are baptised in Devon, although John and Thomas were baptised in London. In the 1841 and 1851 census records, we just find William in New Street, but in 1861 both William and Richard are listed there as toolmakers. That Richard was staying overnight at New Street was probably just accidental as in 1851 and 1871, we find him with his wife Jane and children in Clapham and Lambeth respectively. In 1851 Richard is listed as “assistant clerk cutlery warehouse” and in 1871 as “retired plane maker and cutler”. Although the actual place of work is not stated, one may assume he worked in the family business. 1862 is a year full of changes for the firm. In that year, William had a new property built at 27 Bedford Street. In the catalogue for the 1862 International Exhibition, 54 Broad Street (later 54-55 Broad Street) is listed for the first time, which may very well coincide with the split of the business into a retail and a wholesale branch. Around the same time, they must have moved from New Street to 17 & 18 King Street because their manufacturing premises had been pulled down to form the New Street from Cranbourne Street to King Street. In January 1865, William died and Richard continued the business. In 1867, the partnership he had with his son Walker and Thomas Elis Hooker, is dissolved. Richard continued tool making at King Street and Bedford Street. Richard retired somewhere between 1867 and 1871, but the business continued. The business is taken over by W M Marples & Sons and tools continued to be made in London until 1904 when manufacturing relocated to Sheffield. A vintage tool made by a well documented company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Wood Moulding Plane J Moseley & Son maker also stamped (Previous Owners) HIT & E Dunstan, RA Dixon with an N inside a W flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, moseley -
Bendigo Military Museum
Book, An Entertaining War
MIchael Pate - renowned Australian actor and film makerHard cover - white with black and red lettering Black and red lettering on spine White dust cover with cartoon on "The Islanders" on front and photo of Michael Pate on back. Illustrated - 189 pages plus 3 indexDonated by BGO Y Mens Club on the 1st title pagebooks, military history -
Trafalgar Holden Museum
Tool - Sealing tool
boot makers sealing tool used during ca1900boot makers sealing tool used during leather marking as requiredmetal head with wooden handle with different size grooves on headGROOVES MARKED 8 AND 9 N KADERAW - PRAHAN - 12cobblers, sealing tool -
Flagstaff Hill Maritime Museum and Village
Functional object - Ships Lamp, Telford, Grier and Mackay, 1914-1915
The subject item was produced in 1914/15 by the Telford Grier and Mackay Company in Glasgow, Scotland, this lantern was not used to provide visibility for Sailors on a ship, rather, it is meant to help other vessels identify the ship’s presence and heading in low visibility conditions hence it is marked Port and has a red filter. The lantern would have been placed along the port side of larger vessels to provided an unbroken light and would be visible in an arc from as well as at an angle from the port side of the vessel. The company was established in 1904 at 11 Fairley Street Glasgow and in 1922 moved to 10 Carrick Street. The company manufactured patented lamps for marine use, later moving into the manufacture of electrical and mechanical items. A significant marine kerosene lantern made by a company that patented this type of lantern for use by the British Navy and for merchant ships the world over. This item today is rare and sought by collectors.Ship's port side sidelight lamp with clear glass frenal lens with red filter behind, burner missing, replacement with modern electric fittingTwo makers lozenges one marked PORT the other has the maker Telford, Grier and Mackay, Glasgow, 1915 marked on main body chimney has 1914 marked . Also serial No C976 stamped on backplate.flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lamp ship's sidelight, ship's sidelight lamp, port lamp, marine light, navigation light, kerosene ship lamp -
Federation University Historical Collection
Resistance Control Box, Techtron Resistance Control Box
Grey metal rectangular box with 3 large dials down centre and 3 terminals at one end Dials show different levels - capacitiesMaker's plate: Techtron - Techtron Appliances - Melbourne - Australia Type: R3D1 Serial: 101resistance control box, terminals, ohms dials, techtron appliances, scientific instruments -
Federation University Historical Collection
Costume - Blazer, Ballarat Teachers' College Blazer, c1954
Wilma Hall (later Hobbs) wore this blazer while studying at the Ballarat Teachers' College in 1954-55. The college was established after the Victorian State Government and the State Education Department decided to establish two provincial teachers' colleges, at Ballarat and Bendigo. On 04 May 1926 W.H. Ellwood (Principal), Miss A. Bouchier, and Mr A.B. Jones, welcomed the first enrolment of 61 students to undertake the one year course. In 1927 the College moved to the former Ballarat East Town Hall in Barkly Street, which was remodelled for their use. It closed in December 1931 due to the Great Depression. In 1946 Ballarat Teachers' College reopened and relocated to the Dana Street State School. It was originally planned to open as a women's college, for whom the residence at 130 Victoria Street was purchased, but the decision was made to admit resident men from Ballarat. Mr T.W. Turner was appointed as Principal in 1951 and directed the introduction of a two year course for the Trained Primary Teachers' Certificate. The former one year course was terminated at the end of 1951. In 1958 the College was relocated to a custom built facility at Gillies Street, in close proximity to the Ballarat Botanical Gardens. Numbers increased with the introduction of the Trained Infant Teachers' Certificate course under the guidance of Mary Egan. With the introduction of a three year Diploma Course in 1968 accommodation became cramped. The introduction of the Diploma of Teaching (Primary) led to the Trained Infant Teachers' Certificate being discontinued in 1969, and the end of the Trained Primary Teachers' Certificate in 1969. Secondary Art and Craft students began studies at Ballarat Teachers' College in 1969 under Mr Ted Doney. In 1971 Mr D. Watson was appointed Principal. The State College of Victoria was proclaimed by Order in Council on 24 July 1973, and Ballarat Teachers' College became a constituent college of the State College of Victoria, and was known as State College of Victoria, Ballarat. By 1975 the College moved to Mount Helen as part of the Ballarat College of Advanced Education. Pre service teachers currently undertake their studies on the Mount Helen Campus of Federation University. ("Ruffians Attempted to Carry off the School Tent: A History of State Education in Ballarat", 1974, p73-4.)Blue unlined, woollen Ballarat Teachers' College blazer with embroidered pocket. The jacket had three buttons at the front although two are missing. The edges are all bound with tape including the pocket and the sleeve binding is 12cm from the cuff edge. The seam edges are either turned back and stitched or cut with pinking shears. There is a small panel on either side of the inside between the side seam and the facing which reinforces the pockets.Embroidered emblem of the Ballarat Teachers College and woven makers patch - The Myer Store for Menballarat teachers' college, blazer, wilma hall, wilma hobbs, textiles, costume, embroidery, uniform -
Federation University Historical Collection
Costume, Nurses Uniform, Early 1970s?
This nurse's uniform (probably a Nurse's Aid uniform) was used at the Ballarat Base hospital.This nurses uniform comprises a mauve princess style dress with short sleeves, a front zipper, side pockets and white piping around the collar, sleeve cuff and pocket trim. The back has a yoke and a pleat on either side for comfort. It is made of polyester and cotton blend.Written in black maker - B.H. Written in black marker on a cotton tape - J. Dobbinnurse, uniform, ballarat base hospital, nurse's aid, nursing, school of nursing, costume, textiles -
Bendigo Military Museum
Uniform - COAT, SERVICE DRESS, RAAF, c1944
" Garnet William Charles JACKSON' No. 50970, Enlisted 23/02/1942, Age 28 years. Discharged 18/01/1946. Rank of Flight Sgt in No.73 Operational Base Unit.Dress Coat - navy blue colour, cotton twill fabric, navy blue and beige cotton lining to shoulders and sleeves. Full belt with bakelite and metal buckle. Buttons - black colour bakelite with metal shank. Emblazoned with the Kings Crown and a wedge tailed eagle in flight. WW2. Propellor on sleeves - Leading Aircraftsman. Red stripes on sleeve - years of overseas service.Maker's label - black ink print on label " V93/Made in/ Australia/1944/ Size ".uniform, raaf, ww2, jacket -
Warrnambool RSL Sub Branch
Peaked Hat - Army, Military Uniform, Date unknown - Manufacture: Commonwealth Government Clothing Factory, Melbourne
As an historic army uniform with an association to Victoria this item is of local historic and social significance. It is also in very good condition. Woolen khaki peaked hat has a central head band with solid peak connected to the lower front of the head band. The top is high at the front and protrudes out from the headband about 3cm on all sides. There is a brown leather chinstrap on the lower front of the headband above the peak and this has a slide extension that can be enlarged to go under the neck to keep the hat in position in high winds. The chin strap in connected to the headband with two plastic button that have queens crown above a map of Australia. Affixed to the front of the headband above the peak is the Artillery Corps metal hat badge in gold colouring. The interior of the top of the hat has a cotton lining under the woollen exterior and then a plastic protective lining to avoid sweat bleeding onto the exterior. A cloth badge with the makers name sewn to the cloth lining and covered by the plastic protective layer. uniform -
Warrnambool and District Historical Society Inc.
Badge, Manchester Unity IOOF
This badge has been issued by the Victorian branch of the Manchester Unity Independent Order of OddFellows. This is a benefit society owned by members who assist other members in times of illness or unemployment. Originally founded in Manchester, England, the M.U.I.O.O.F. started in Melbourne in 1840. The Warrnambool branch was founded in 1860. This badge has no known local provenance but Warrnambool members of the M.U.I.O.O.F. would probably have worn such a badge in the past so it is kept as a memento of those times.Gold metal badge in a shield shape with royal blue enamel with text as a banner across the top and again at the bottom . An inner shield contains a cross in red with five stars . The four corners each contain a symbol .MANCHESTER UNITY IOOF . Victoria at the top of the badge. Makers name Newman is stamped on the back.manchester unity independent order of oddfellows, manchester -
Sunshine and District Historical Society Incorporated
Seed & Fertilizer Drill Panel, Between 1921 and 1930
The item is an end panel from the box section of a "SUN' Seed & Fertilizer Drill. It was manufactured by H.V. McKay Pty. Ltd. at their agricultural machinery manufacturing plant in Sunshine Victoria. The date of manufacture is estimated to be somewhere between 1921 and 1930 because of the imprint H.V. McKay Pty. Ltd. According to the Museum Metadata Exchange (http://museumex.org/oai/mv/2749) the Sunshine Harvester Works was reformed as H.V. McKay Pty. Ltd. in 1921 and in 1930 it became H.V. McKay Massey Harris Pty. Ltd after a merger with the Canadian farm machinery manufacturer Massey Harris. The two events in 1921 and in 1930 are also confirmed by Churchward, M. (2006) at (http://collections.museumvictoria.com.au/articles/2010).This early 20th century item is a relic of the agricultural machinery manufacturing past of Sunshine Victoria. The company started by H. V. McKay no longer exists and neither do the subsequent manufacturing companies H.V. McKay Massey Harris Pty. Ltd., and the later Massey Ferguson (Aust.) Limited. Manufacturing has disappeared from this site being replaced by a shopping centre and other retail outlets, high rise apartments, law courts, police station, Vic Roads, and soon will house the new Brimbank Council offices and library.Brown rusty cast iron end panel from a Seed & Fertilizer Drill"SUN" / SEED & FERTILIZER DRILL / H.V. McKAY PTY. LTD / MAKERS / SUNSHINE / D879 agricultural machinery, sun, "sun" seed & fertilizer drill, h.v. mckay pty. ltd., d879, 1921, 1930, sunshine -
Glen Eira City Council History and Heritage Collection
Robe
Official Municipal (?) Robe, Black pleated (woollen?) robe.Makers details printed in gold on cotton tag stitched on inner side, back of robe. -
Kew Historical Society Inc
Accessory, Oroton, Black Enamel & Brass Handbag, 1960s
The Kew Historical Society's Fashion & Design collection includes a small and representative collection of reticules, purses and handbags, purchased, inherited or collected by members of the Society. These items date from the Nineteenth and Twentieth centuries, and conform to fashions and styles popular during the period of their use. Some of the items are handmade, while others are mass-produced commercial products. The handbag was owned by, used and donated by Dione McIntyre.The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s. Black Oroton handbag with brass and black enamel frame and handle. The inside label includes the company name - “OROTON” - and maker details - “Made in West Germany”.costume accessories, handbags, oroton, costume accessories, handbags, purses, oroton, mcintyre collection -
Bright & District Historical Society operating the Bright Museum
Cup wine small
Brought to the Ovens Goldfields by Chinese men working in the area in the 19th century. Most likely made in China.Aldo Gios recorded the location of where most of the pieces in this collection were found. Some maps drawn by Aldo Gios also give more detail. This detail is rare, as most pieces of broken crockery were discarded and complete items were usually collected with no thought to recording the location they came from. Part of one of the largest collections of Chinese ware found in the Upper Ovens area and the only one recording the location where found.Porcelain wine cups, celadon. Chinese tableware.Chinese writing or maker's stamp on base of both cups is identical. Writing is in blue colour.chinese, cup, gios, tableware, glaze, porcelain, harrietville, celadon, wine -
Flagstaff Hill Maritime Museum and Village
Weapon - Cannon, circa 1825
HISTORICAL INFORMATION In an article dated 26 March 1963, the Warrnambool Standard reported: “A cannon which has lain on the ocean floor since the barque, Children, was wrecked at Childer’s Cove on January 15, 1839, was raised by three Warrnambool skindivers at the week-end…The cannon, weighing about 750 lb. and 4-ft. 6-in. in length…is in excellent order considering the length of time it has remained under-water”. No conservation measures were taken at that time, other than chipping off the marine growth with hammers and cold chisels. The minutes for the 4 February 1974 meeting of the Flagstaff Hill Planning Board recorded that “a cannon recovered some time ago was lying in the garden of [one of the three original divers] and that it could be picked up at any time”. Peter Ronald, past Manager and Diver for Flagstaff Hill, notes that the CHILDREN cannon would have been recovered by the other divers around 1964. When the cannon came into care of Flagstaff Hill it was given basic conservation relevant to the time. (At the same meeting the Board was advised of the recovery of an anchor from the wreck of the CHILDREN by Flagstaff Hill divers (Peter Ronald, Colin Goodall and Gary Hayden, and Hank Howey and Andrew Coffee), and its interim relocation in the sea at the end of the Warrnambool Breakwater while awaiting conservation). The CHILDREN was owned by the pioneering Henty family of Portland. She was en route from Launceston to Adelaide, when she foundered in rough conditions at Childers Cove on 14 January 1839. The CHILDREN was a small three-masted barque, only 29 metres long and 254 tons weight, with 14 crew members and 24 passengers (including 9 children) on board. The ship was also carrying an awkwardly ballasted cargo of 1500 sheep, 8 bullocks, 7 horses, 5000 London house bricks, 6 whaling boats, and general trade goods. When the CHILDREN was driven into the limestone stack at the entrance to the cove, the seas smashed her into pieces within half an hour, and 16 lives were lost. The CHILDREN was an all-wooden ship, built in 1825 at Liverpool, and her shipwreck in 1839 is one of colonial Victoria’s earliest and most significant maritime disasters. There is little left to mark the tragedy on the seabed now, apart from some of the house bricks intended for the Henty’s Portland Bay settlement. Despite its poor condition, the CHILDREN’s signal cannon remains an important and interpretable record of her demise, (along with her anchor, the bottom half of her ship’s bell, and portions of a brass porthole - artefacts that are also in the Flagstaff Hill collection). In 2015 the CHILDREN cannon will undergo further conservation. (Conservation Management Plan for Victorian Guns and Cannon, South Western Victoria, May 2008, ref W/F/06) The shipwreck of the CHILDREN is of state significance — Victorian Heritage Register No. S116.A 1.3 metre iron 6pdr cannon recovered from the wreck of the CHILDREN. The shape of the cannon tapers from a thick round breech to a flared muzzle, with an 8 centimetre bore, and two side trunnions for pivoting on a wooden gun carriage. It was recovered from the shipwreck site of the CHILDREN by local divers in 1963. This small muzzle-loading signal cannon is in poor and unrestored condition. The cannon’s upper profile of smooth grey metal casing has corroded off, leaving an extensively oxidised rough red surface of crumbling iron. The bottom half of the cannon remains intact although the outer smooth casing also appears to be separating from the iron core of the barrel. Original grey casting is also missing from the breech and muzzle ends of the cannon. Corrosion and spalling of the upper surface layer of the cannon has removed the maker’s marks and specificationsflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, the children, ship’s cannon, signal cannon, childers cove, 1839 shipwreck, conservation of marine artefactsm, shipwreck-coast, flagstaff-hill-maritime-village, cannon, 6pdr small bore cannon, children cannon, defence, children, shipwreck, 1839 -
Flagstaff Hill Maritime Museum and Village
Domestic object - Butter Churn, Cherry and Sons, 1890-1920
The subject item is a good example of a large, hand-operated Bentwood box butter churn used to make up to 14 pounds of butter. It was made in Gisborne, Victoria, by the famous manufacturer, E. Cherry, and is known as an Improved Patent No.2 model probably dating from the late 1800s. The Cherry works specialised in making all types of butter churns and equipment for both domestic use on farms and small butter factories during the late nineteenth and early to mid. twentieth centuries. Milk was "separated" to retrieve the cream which was then beaten to make butter. E Cherry began making various models of Cherry butter churns in 1858, Edward Cherry migrated from Herefordshire England to Australia in 1855 with his wife Ann Appleby, nee Davis, and established a joinery workshop at Gisborne, Victoria. He began by making butter churns in his spare time and his product soon became popular allowing him to establish a viable business. A factory was established in 1875 and he started to make churns of all sizes including up to industrial scale. He exported his products to many countries around the world, Edward Cherry died in 1909 and the business was then run by his son George until he died in 1917. E Cherry's other son Thomas (1861-1945) was also involved in the firm maintaining an interest for several years. He had been born in Gisborne and became a senior house medical surgeon at the Melbourne Hospital in 1890. He continued his studies at Kings College London, eventually becoming a renowned bacteriologist and agricultural scientist. A significant item giving an snapshot into how early industrial manufacturing became established in Australia in the production of domestic and industrial dairy equipment.Butter churn wooden manually operated made by Cherry and Sons with rotating lever curved plywood basin and parallel cross beamed horizontally spoken churning apparatus inside with wooden plug at lower side of churn. Label in block transfer "E CHERRY / MAKER / GISBORN / VICTORIA / 2" "IMPROVED PATENT"warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, butter churn, wooden butter churn, e cherry & sons, dairy equipment, gisborne, food preparation