R.T. Vale had a stationary and bookshop in Ballarat. He had studied at the Ballarat School of Mines, and served on its Council. In 1886 he was elected to the Victorian Legislative Assembly as the member for Ballarat West, serving until 1889 and again from 1892 to 1902. From 1894 to 1896 he was a minister without portfolio.Two handwritten letters from Richard T. Vale. .1) Letter on Government of Victoria Education Office letterhead dated 09 May 1898. .2) Letter of Legislative Assembly Victoria letterhead dated 28 October 1898..1) Dear Martell, I want you to send to dept details as to Room required size of classes how often they meet [illegible] of present accommodation and [illegible] how they clash ad how the proposed rooms are to be erected send at once. Yours truly R.T. Vale .2) 28.10.1898 D.M. I called at [illegible] today plans not quite colored yet I have to be traced from sheets full of detail drawings [illegible] to service and would made had it been safe when they tried [illegible]. I [illegible] would have to wait another fortnight. Yours R.T. Vale.richard t. vale, r.t. vale, legislative assembly victoria, goverment of victoria

Three invoices, two made out to the Ballarat School of Mines. .2) has a red Victoria 1 penny stamp duty stamp on it. .3) has two red Victoria 1 penny stamp duty stamp on it.ballarat school of mines, richard t. vale, richard vale, bookseller, invoice, letterhead

Correspondence from W. Robinson of Soho Foundry Maryborough to the Director of the Ballarat School of Mines. The letter is on letterhead which includes details for Abraham Robinson, Engineer, iron and brass founder, boiler maker, blacksmith, etc. The correspondence related to two samples of tailings for assay.soho foundry maryborough, abraham robinson, w. robinson, assay, ballarat school of mines, engineer, brass founder, iron founder, boiler maker, blacksmith

Handwritten correspondence from the Castlemaine School of Mines asking the Ballarat School of Mines for a list of their charges. castlemaine school of mines, ballarat school of mines, letterhead

Handwritten letter from N.E. Russell of Elaine asking for information about the treatment of pyrites at the Ballarat SChool of Mines Laboratory. ballarat school of mines, elaine, n.e. russell, pyrites, ballarat school of mines model mine

Information from Norman F. Dalton: Ballarat had a reticulated DC supply in the early part of last century and in 1905 had sufficient generating capacity to enable the trams to be changed from horse drawn to DC electricity. The use of electricity increased with the main power station located on Wendouree Parade, near Webster Street, under the ownership of The Electric Supply Company of Victoria. AC generating plant was installed in 1925 and conversion to AC proceeded. In 1934 the company was taken over by the State Electricity Commission Victoria (SECV) and more AC generation was installed and the changeover of customers was accelerated. This is around the time that the Synchronome Frequency Checking Mast Clock was installed at the Wendouree Parade Power Station. The SECV Annual Report of 1921 states: ::Section 11 of the act directed the COmmission to enquire into the question of securing the adoption of such standards of plant and equipment of a system, frequency and pressure for the generation and distribution of electricity as will admit of the efficient interconnection of undertakings throughout the State. In 1934 when the SECV took over the Ballarat operations the question of linking with the State grid had been a planned operation for some years but due to financial considerations had hindered it and in fact would continue to do so for a further 10 years. So while the need for close frequency control for interconnection was hardly an issue, the need to keep electric clocks correct was important, particularly as this item was a frequent sales point to cover the inconvenience and sometimes expense of converting from DC to AC. The clock is a very accurate pendulum clock with provision for varying effective length during operation for precise time regulation. There are two normal time dials and one is controlled by the pendulum and the other is operated by the system frequency. When the clock was in use it was installed by the MEter and Tests Laboratory and the time was checked daily by radio time signals. The two dials were repeated in the operators control panel in the Power Station. A maximum deviation between the two dials was set in the operating instructions (eg 5 seconds) and the operator would correct this when necessary by remote manual alteration of the turbine governor set point. The clock was used to drive and regulate a system of "slave" clocks which were used to display the time in various locations around the power station. A slave clock is a simple clock which is driven by a small electric motor, its accuracy is regulated by the master clock every 30 seconds to ensure that it and all the other slave clocks in the station are on exactly the right time; slave clocks were placed in various locations, from common rooms to workshops. A master clock could potentially run thousands of slave clocks at one plant. The clock also contains a rectifier. A rectifier is a device that is used to convert AC power to more stable DC current.Two clocks in a timber case. Both are electric, one is powered by the main pendulum mechanism, the other is a self contained electric clock. The main mechanism is of the gravity arm and roller type, which sends an impulse to the slave clocks every 30 seconds. The This Synchronome Frequency Checking Master Clock was used at the Ballarat Power Station. Below the main section of the case is a smaller cabinet containing a rectifier to provide consistent DC power for the clock. The rectifier was made by the Victorian company Hilco, which was located in Burwood. There is a high chance this is not the original rectifier from this clock as there appears to be brackets to hold a larger device in the space the rectifier occupies.Front below main clock face on front of case: "Patented Sychronome Brisbane" Lower left-hand clock face: "Frequency time" Lower right-hand clock face: "Standard Seconds" Synchronous electric clock mechanism on door (Frequency time clock): >200/250 V. 50~ >"Synchronomains" Made in England >Direction indicator for clock starting switch >"To start move lever in direction of arrow and release" >"Patent applied for" Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for main clock face: >"English Made" >"Patented" >Serial number "8751" >0 above right-hand pillar on front-plate Inside case, back panel, top enamel plate: >Seconds Battery + Pos. > Battery Common or - Neg. >1/2 min dials Inside case, back panel, bottom enamel plate: external seconds dial Inside case, right hand side, electrical knobs: two switches, both "A.C. mains" Pendulum rod, below suspension spring: Serial number (?) 0000005 Rectifier in bottom cabinet: >"Hilco Rectifier" >"A.C. Volts 230/240" >"Model 1060/S" >"A.C. Amperes" >"Serial No. 1060/S >"Phases 1" >"D.C. Volts 6" >"C.P.S. 50" >"D.C. Amperes 1" >"Made in Australia by Hilco Transformers McIntyre St., Burwood, Victoria." Bakelite electrical plug: makers mark Lower cabinet, RH side panel, pressed tin plate: "AC" (upside down) Brass speed adjustment, outer right RH side: "S" and "F" Ivory and wood pendulum beat ruler: >Ruler, with 0 in centre and numbers 1-5 in ascending order from centre on left and right. > "Synchronome Patent." Steel plate, back panel, inside case, right hand side: >N R A" (descending) >"2191" serial number/part number Face of main clock: "Synchronome Electric" synchronome frequency checking master clock, electricity, state electricity commission, wendouree parade power station, secv, clock, time, pendulum, electric supply company of victoria, norman f. dalton, ballarat power station, rectifier, slave clock

A mining safety cage was used in a mine lift. It was fitted with mechanisms to prevent the cage from dropping if the lifting rope broke. In the 1870s in Victoria, deaths and injuries from falling cages in vertical shafts of gold mines were a major problem. The inventor of this safety cage was Robert Allan, a machinery maker of Creswick Rd, Ballarat. He said his cage featured a ‘dissolving’ fulcrum. Others called it an eccentric (off centre) system. Note the pair of clutch levers designed to grab the side guides if tension ceases in the suspending rope from the poppet head pulley. Also, the hinged ‘lids’; designed to protect miners trapped in a braked cage from falling rope, and to enable rescue of the miners. This model was presented to The Ballarat School of Mines Council in November 1876. This model was shown at the Smeaton Show in November 1874, Ballarat School of Mines Museum from 1876, and examined by the 1879 Victorian Board of Inquiry (Pg 15 of FedUni Catalogue 3437) From the Argus of 13 November 1874: At Smeaton Show, Robert Allan of Ballarat won 1st prize for a Model of a Mining Cage, a Butter working machine, a Cheese press and a Curd Mill. By 1878 an Allan Safety-Cage was in operation in the Number 6 shaft of the Band and Albion Consols mine in Ballarat. This cage was judged the best inspected by the Victorian Board of Inquiry by 1879, p. 39.Mining was a big industry in Ballarat in the late 1800s and a lot of deaths were recorded because of mining accidents, the development of the mining safety cage brake limited the deaths and injuries from falling cages in vertical shafts. The model also has links to the Ballarat School of Mines, being presented to the council in 1876. Ballarat School of Mines is the oldest Technical School in Australia and is a predecessor of Federation University. The model is significant to Ballarat's mining history.Model of a mine safety cafe. A grey painted wooden frame with metal model of cage and safety brake system. When tension ceases in rope a pair of crutch levers grab strongly onto the wooden guide strips which run down the sides of a vertical shaft. This safety cage was discussed in "Safety Mining Cages. Report of the Board of Enquiry on Safety Cages 1878-9; together with proceedings of the Board and Appendices".safety cage, mine cage safety brake, robert allan, model, safety cage model, machine maker, millwright, mining, gold mining, tools, equipment, victorian board of inquiry

The black border recognised the death of Queen Victoria.Handwritten letter on letterhead Public Library, Museums, and National Gallery of Victoria which was bordered in black. The paper has been embossed with the crest of the library. The letter requests copies of the Ballarat School of Mines Annual Reports for the library.ballarat school of mines, melbourne public library, national gallery of victoria, letterhead, armstrong, state library of victoria, copyright act, legal deposit, crest, emboss

University of Ballarat Pull Up Banner featuring the star logo. It is in a grey carry bag.university of ballarat, banner, crest, logo, marketing

University of Ballarat Banner and stand for tabletop in black carry caseuniversity of ballarat, banner, marketing

The University of Ballarat was granted a Coat of Arms from the College of Arms in London. The grant has five parts: the Shield, the Crest, the Supporters, the Motto and the Badge. The origin of the University Arms us based on the history of the University and its antecedents. The earlier institutions include the School of Mines and Industries, the Ballarat Teachers' College and its successor, the State College of Victoria at Ballarat. A Coat of Arms signifies the heraldic achievements of an individual or community. The University of Ballarat's Coat of Arms symbolises the golden past of the City of Ballarat and the former institutions, the School of Mines and Industries Ballarat Ltd and the Ballarat Teachers' College, which came together to form the University. At the same time, the motto 'dare to be different', presents a challenge to everyone in both the University and the region to strive for new ways of achieving.Pullup Banner of the University of Ballarat Coat of Arms on white background - in grey carry caseuniversity of ballarat, university of ballarat coat of arms, pullup banner, marketing, logo, coat of arms

The Ballarat Technical Art School was a division of the Ballarat School of Mines. A custom built building was opened in 1915. A plan on linen showing the proposed fittings for the new Ballarat Technical Art School Building built in the grounds of the Ballarat School of Mines. The plan has been hand coloured and designates rooms for freehand and plant drawing, model and cast drawing, Modelling Room, Light and Shade Room, Lecture room, Head Master's Office, attendant's office, cloakroom, storeroom, Castings Room, Sheet 7 W.J.G. 5.3.14ballarat technical art school, buildings, ballarat school of mines, plan

The Ballarat Technical Art School building opened in 1915. It was a division of the Ballarat School of MinesPlanes for the Ballarat Technical Art School basement and ground floor, featuring hand coloured sections. Wood Carving and Metal Working were located in the basement. Scale is 8 feet to 1 inch School of Mines Ballarat New Art School C.B.G.5.4.13ballarat school of mines, ballarat technical art school, plan, buildings, metalwork, wood carving, freehand and plant drawing, model and cast drawing, lecture room, modelling room, light and shade, architectural drawing

The Ballarat Technical Art School was a division of the Ballarat School of Mines. The new building opened in 1915Hand coloured plan for the proposed fitting for the Ballarat Technical Art School.Stamped 'Department of Public Works, Melbourne, Victoria' W.J.G 7.12.14ballarat technical art school, ballarat school of mines, plans, buildings, architectural drawing

Ammeter in timber frame.ammeter, scientific instrument

The Ballarat School of Mines Botanical Gardens was established in 1872. It was used to grow plants for the Materia Medica classesTwo views of the Ballarat School of Mines Botanical Garden.ballarat school of mines, botanical gardens, ballarat school of mines botanical gardens, materia medica, sytem garden, parks and gardens, landscape

The Ballarat School of Mines Botanical Gardens are locate at the rear of the current Administration Building. The gardens were important for the teaching of Materia Medica and Pharmacy at the Ballarat SChool of Mines. Ferdinand Von Mueller, a one time examiner in Botany at the School, is thought to have supplied or suggested plants. Black and white photograph of the path and stairs in the centre of the Ballarat School of Mines Botanical Garden. The photograph depicts mature trees in the gardenballarat school of mines botanical gardens, ballarat school of mines, botanical gardens, materia medica, pharmacy, ferdinand von mueller, noel l. harvey

The tree was planted to mark the centenary since the establishment of the Ballarat School of Mines Botanical Gardens in 1879.Black and white photograph showing four men watching a tree being planted by Dr D. Churchill (CSIRO). From left to right the four men are M. Brown (Mayor), Graham H. Beanland (Principal), E.J. Tippett, Rex M. Hollioake (SMB Council President). ballarat school of mines botanical gardens, ballarat school of mines, botanical gardens, m. brown, graham beanland, d. churchill, e.j. tippett, rex hollioake, centenary

The Former Ballarat Wesleyan Church was later known as the Ballarat Methodist Church. It was sold to the Ballarat School of Mines and became the Museum.A stone church located in Lydiard Street South. Four people lean against a white picket fence. ballarat school of mines museum, ballarat school of mines, museum, solomon and bardwell