A complete replica uniform set of clothing and all items that were or could be worn by a first AIF soldier.Light horse brigade .1) Jacket, 100% wool with cotton lining. 7th Battalion AIF colour patches with a brass A signifying original ANZAC on both sleeves. Right sleeve has sergeant's stripes & 5 blue & 1 red chevron stripes. Left sleeve has 3 brass bars re WIA 3 times. Rising Sun badges on each collar & Australia badges on shoulder straps. Belted at waist. .2) Jodphurs, khaki corded wool. Brass button up fly. .3) Braces, red, white & blue oblique striped. .4) Hat, size 57, khaki Akubra with felt pugaree, leather chin strap, & blackened brass Rising Sun badge on upturned rim. .5) & .6) Puttees, pair, khaki wool felt with khaki cotton tapes. .7) & .8) Boots, pair, size L, tan coloured leather with dark brown leather laces, leather soles with metal reinforcing on heels..1) & .2) Makers labels. .4) Hat: Akubra, Made in Australia; On badge: Australian Commonwealth Military Forces. on hat: "5.7 Akubra Made in Australia"uniforms-army, costume - male footwear, costume - male headwear

Porcelain figurine of a woman holding a baby. The woman is wearing a blue dress, with a blue floral pattern, underneath a white medical coat. She has blonde hair which is tied loosely behind her, and white slip on shoes. She is holding the baby in front of her chest, with the baby's back leaning against her left forearm and the baby's head cradled in her left hand. Her right hand is supporting the baby from beneath. The baby is loosely wrapped in a white blanket, with its torso visible. The woman is standing next to a small table which supports a set of baby weighing scales and a bottle of talc next to the scales. A cloth trails down from the table to the floor. There is a manufacturing mark on the back of the base of the statue. The top row of text is obscured, but the remaining test on the mark reads 'porcellane/PRINCIPE/MADE IN ITALY'. A small Certificate of Origin tag is attached to the weighing scales by a small, thin cord. Sticker underneath the base of the statue reads 'BELLINI/PONTE VECCHIO/FIRENZE'.

BHS CollectionPhoto of Hanro Staff: Black and white photo with three ladies adjusting a dress on the centre lady. The dress has an open collar with two buttons at the front and three darts at the waist either side of the buttons. The long sleeves are gathered at the cuff, the dress is slightly gathered at the waist and supporting a belt. The lady to the left is wearing a two toned blouse with three quarter puff sleeves and turned up cuffs and is buttoned up the front. She is wearing a flared skirt the same material as the trim on the blouse, a dark coloured belt drawn together with cord at the front. At the right the lady is wearing a long sleeved cardigan with three buttons at the bottom. Underneath is a horizontal striped pullover She is wearing a pleated flared skirt with a belt at the waist. The ladies are standing against a wall of wood panelling.. On the back of the photo hand written in pencil is the work *Shirley* and *Copyright 'Bendigo Advertiser' Bendigo Advertiser Photographic Service. For re-order quote CK245* Box 116ABendigo Advertiser Photography Servicephotograph, person, hanro, bendigo advertiser photography service. hanro

Most were used in various capacities at Ballarat School of Mines or University of Ballarat.Assorted lamps including Edison Carbon filament light bulbs and other special purpose lamps, .1-3) Robertson, pear shaped 220 V 16, carbon filament? bayonet light bulb with 'nipple'. .4) Ediswan, standard shaped, 928, carbon filament? bayonet light bulb with 'nipple'. .5) (B in a circle) 280 V 32 oo1A, pear shaped, carbon filament? bayonet light bulb with 'nipple'. .6-7) Crompton? standard shaped, carbon filament? bayonet light bulb. Clear glass with an amber tint. .8) 230-240 V 40 W, pear shaped, wire filament bayonet light bulb. .9-10) Osram standard shaped, heavy spiral and disc electrodes, bayonet light bulb. (The disc is loose in 10) .11 a&b) Osram black glass, large standard shaped, 230-240 V 125 W, bayonet light bulb. .12) Philips tubular shaped projector lamp with instruction leaflet. .13) Philips tubular shaped projector lamp with instruction leaflet in original box. .14) EH JA 12 V 55 W small projector lamp. .15) Large special purpose, standard shaped, frosted bayonet light bulb. .16) Siemens, standard shaped, modern Edison screw light bulb. .17) Philips, standard shaped, modern Edison screw, frosted light bulb. .18) Crompton, gas filled 240 V 75 W, standard shaped, bayonet frosted light bulb in original box. .19) Crompton, gas filled 230 V 300 W. standard shaped, large modern Edison screw light bulb. .20) Probably an extension cord with a bayonet fitting at one end connected by a twisted cord of two fabric covered wires to a large socket. This socket has a copper Edison screw inner, surrounded by a ceramic tube and covered with a copper housing. The housing is cracked in two places.Some have makers brand and voltage and wattage stamped onto the glass.scientific instrument, ballarat school of mines, globes, edison, lamps, light bulbs, bayonet

alan gardner collection

4 calendars. (a) 1903 tiled Vine Leaves'. It is a foldable calendar. It is in four sections with a blue strip down each side. Each section has 3 months and a verse printed on it. There is vine leaves and grapes. Each month is printed on a large leaf. (b) 1941 calendae with 'A Calendar of Happy Days' printed in gold on the front of the little calendar booklet. It is a mottled grey colour with a light greenish ribbon at the top. It has a coloured picture of the Crucifiction glued inside a gold line border. (c) 1950 calendar. Coloured garden scene with trees and colourful flowers, pathways and steps. An archway at the back. Picture glued to a heavy piece of card with a pale blue calendar booklet glued to the bottom with a piece of pale blue heavy paper. 'May each Day be a Happy One' printed in gold on the front of the booklet. (d) Pale blue1937 calendar booklet with 'Calendar' printed on the front in dark blue. The back is a piece of wood (3 ply) with hand painted blue & yellow flowers painted on it. A piece of pink cord is threaded in a hole at the top for hanging.ornaments, residential, malone collection, assorted calendars

Clothing. Pointed lapel collar, with underside of collar lined with felt. Two brass metal badges in a Leidertafel style - one on each side of collar. Cloth circular badges at the top of each sleeve are embroidered with a coat-of-arms, below which are two shields, one blue, and embroidered with a bunch of grapes, one red embroidered with a sheaf of wheat, a sheep, and perhaps a symbol of the landscape. Two breast pockets, rectangular with rounded lower corners and a shield shaped flap, closed with a 2 cm brass button impressed with a laurel wreath, and horn, suspended by a cord, and triple loop-a replica of British Light Infantry buttons. Two lower ''pockets'' are flaps only, giving the impression of a pocket only. Jacket lined with blue taffeta-like fabric-possibly polyester. One internal bound pocket inside right front. Four 2.5cm brass buttons (as on pockets) at centre front opening. All buttons have a metal back, and metal loop, which enables the buttons to be pinned to the garment, enabling removal for cleaning purposes.On inside breast pocket: A Quality Garment by Australian Government Clothing Factory. On back of buttons : Stokes Australia.costume, male ceremonial, marong municipal band blazer

This afternoon dress was owned and first worn in 1875 by Alice (Henty) Hindson, the daughter of Francis Henty and Mary Ann (Lawrence) Henty. The outfit was worn in the same year as Alice's marriage to John Hindson at Trinity Church, East Melbourne, and may have formed part of her trousseau. Alice's father, Francis Henty, was the youngest son of Thomas Henty, who with his family, their retainers and property moved to the Australian colonies between 1829 and 1832. In 1834, Francis’ older brother, Edward, sailed from Launceston in Van Diemen’s Land to what was to become Portland in the western part of Port Phillip District [Victoria]. Francis, together with the first flock of Merino sheep [in Victoria], followed some months later. The first and second generations of the Henty family established vast pastoral properties in the Western part of the Port Phillip District. Francis Henty managed ‘Merino Downs’ near Casterton, while also living in his retirement at ‘Field Place' in Kew. The Henty Collection of nineteenth and twentieth century clothing, including outerwear and underwear, was collected, stored and exhibited over time by female family members descended from Francis and Mary Ann Henty. During the twentieth century, items from the collection were modelled in two fashion parades by various descendants [1937, 1959]. The items in the collection are historically and aesthetically significant, with provenance provided by oral and written tradition within or held by the family. A number of the items in the collection are very rare survivors, and provide researchers with the evidence needed to reconstruct the lives of notable women in the Port Phillip District [later Victoria] during the nineteenth and early twentieth century.Alice (Henty) Hindson's afternoon dress is a two-piece, two-toned pink ensemble made of silk taffeta. The detailing is done with fine knife-pleated trims piped in ivory satin and decorated with ivory silk moiré bows on the bodice and skirt. The panelled peplum jacket is boned and the front button closure has hand-embroidered buttonholes with handmade covered buttons. The gathered full buttoned skirt falls into a train. The skirt is decorated with rows of ivory tulle corded lace and the hemline is edged with crisp fluted organza and tatted lace. Measurements (mm): BODICE: Girth - Neck 355.6, Chest 863.6, Waist 685.8, Hip 787.4, Cuff 304.8, Hem circumference 1422.4. Vertical - From neck to hem 546.1, Front waist to hem 241.3, Back neck to hem 609.6, Back waist to hem 355.6, Sleeve length 330.2. Horizontal - Neck to sleeve head 60, Underarm to underarm 419.1. SKIRT Girth - Waist 558.8, Hip 1473.2, Hem circumference 3911.6. Vertical - Front waist to hem 1092.2, Back waist to hem 1524. fashion -- 1870s, afternoon dresses, alice (henty) hindson, women's clothing

This jacket appears to be part of the uniform of a junior officer of the 11th (North Devonshire) Regiment of Foot, a line infantry regiment of the British Army. Several companies of the regiment were stationed in Sydney and Hobart between 1845 and 1857. The jacket was acquired by Brighton Historical Society around 1971 as part of a collection of clothing belonging to the Ward Cole family of 'St Ninians', 10 Miller Street, Brighton. George Ward Cole was an early member of the Victorian Parliament and his family featured prominently in Melbourne Society in their time; the family lived at St Ninians from around 1841 until the early 1900s. It is not known who the jacket belonged to or how it came into the Ward Coles' possession. While George Ward Cole was a military man, his service was with the British Navy and during an earlier period than is indicated by this jacket (1807-1817).A red and green flocked cotton military jacket believed to be part of the uniform of the 11th (North Devonshire) Regiment of Foot. The jacket features a green high stand collar secured at the throat by three brass hook and eye closures. The red jacket bodice secures down the centre front with fourteen brass buttons and finishes approximately at the navel. The bottom line sits on the waistline at the sides and back, tapering lower to the naval at the centre front. The bottom line features two substantial brass hooks one on either side of the waist to secure the jacket to the pants. The shoulder line of the jacket is a neat tight fit on the true shoulder, with a slim fitting curved sleeve with gathered fullness at the shoulder. On each shoulder is a metallic corded epaulet with North Devon XI button and second button with floral motif. At the base of the sleeve is a green cuff like detail with a curved elongated point towards the elbow. At the base of each sleeve is a further two brass regiment buttons. The cream woolen jacket lining is lightly quilted over the breast.st ninians, george ward cole, brighton, military, british army, devonshire regiment, north devonshire regiment of foot

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, Ivoryflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, Black plastic, "ARCHER" inscribed. "ARCHER" inscribed.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, tortoise-shellflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, ivory, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic. The second type has a post in the center where the thread is wound. The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace.Tatting Shuttle, black plastic flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting shuttle, handcraft, needlework

Clothing. Navy blue wool (or polyester?) fabric. Pointed lapel collar, lined on the underside with felt. Two brass Leidertafel style badges-one either side of collar. Two rectangular shield-shaped breast pockets have rounded lower corners, and a shield-shaped flap closure, fastened with a 1.8 cm brass like plastic button. All buttons have an impressed laural wreath and horn, (suspended by a three looped cord) - a replica of British Light Infantry buttons. Three brass like plastic buttons at centre front (4th one is missing). All buttons are pinned onto the garment to enable easy removable for cleaning. Two inside breast pockets. Fully lined with blue taffeta-like fabric. On each upper sleeve, at shoulder level there is an 8 cm diameter circular cloth badge, embroidered in blue, red, and gold, displaying a Coat-of- Arms, and two shields - one blue embroidered with a bunch of grapes, and one red, embroidered with a sheaf of wheat and a sheep. These are probably symbols of the rural aspect of the town of Marong. Two lower ''pocket flaps'' are decorative, but not real pockets.Back of buttons: STOKES AUSTRALIA. On inside breast pocket: Embroidered label featuring Australian Coat-of Arms, and Quality Garment by Australian Government Clothing Factory.costume, male ceremonial, marong municipal band blazer

Composite face legs and arms. Painted features. Hair - possibly real, dark brown colour. Doll dressed in royal purple gown. Long sleeves with lace cuff. Faux fur collar around V shaped neckline at front and squared collar at back. Lace trim across front of neckline. Faux fur trim across centre front and centre back at hem. Three underskirts. Mauve satin with darker mauve frill around hem line. Stiffened white fabric (Vilene?) White drawers with lace trim on lower legs. Painted on shoes in gold paint. Purple velvet handbag edged with silver cord. Boudoir dolls are dolls that are made to sit on beds and sofas as decorations rather than being used for play. They are also called bed dolls, flapper dolls, and French dolls. Years of Production Although dolls that sit on beds are still being made today, the classic vintage boudoir dolls were made from approximately the 1920s through the 1940s. Some of the earliest dolls, made even earlier than 1920 in some cases, were made in France. Many of the dolls were made in an art deco style.

Light camel coloured silk (in very poor condition). Long sleeves overlaid with fine black lace in a floral design. Stand-up collar, five cm deep is overlaid with the fine black lace, and finished with a corded braid on the upper edge. Sleeves are tightly gathered at the shoulder tapering narrow at the wrist, giving a ''leg-o-mutton'' effect. 12cm wide fine black lace, attached at the neck edge, and shoulders, forms a ''puff'' decorative over the shoulder, and continues in a ''over-panel'' to the waistline. Ten x 1cm diameter plastic buttons, with a floral impression in them (2 missing) and 12 hand stitched button holes form the front opening. From the lower opening, six ''pintucks'' 12 cm deep, open into pleats at the lower edge, giving fullness to the bodice. Four metal hooks are evident on the lower tucked front and seven hand stitched eyelets are indicated, but are now severely damaged. Bodice is boned with ten X 17cm long bones, and is fully lined with cotton.A tiny 8cmX7.5cm, oval-at-one-end, pocket is stitched into the front opening, at the bustline. Back hemline dips to a V shape at centre backcostume, female, victorian bodice - cinamon coloured silk

This bridesmaid's dress was owned and first worn in 1875 by Alice Frances Henty, the daughter of Francis Henty and Mary Ann (Lawrence) Henty. The outfit was worn at the marriage of her friend Miss Hopkins to Mr ST Staughnton in 1874. Alice's father, Francis Henty, was the youngest son of Thomas Henty, who with his family, their retainers and property moved to the Australian colonies between 1829 and 1832. In 1834, Francis’ older brother, Edward, sailed from Launceston in Van Diemen’s Land to what was to become Portland in the western part of Port Phillip District [Victoria]. Francis, together with the first flock of Merino sheep [in Victoria], followed some months later. The first and second generations of the Henty family established vast pastoral properties in the Western part of the Port Phillip District. Francis Henty managed ‘Merino Downs’ near Casterton, while also living in his retirement at ‘Field Place' in Kew. The Henty Collection of nineteenth and twentieth century clothing, including outerwear and underwear, was collected, stored and exhibited over time by female family members descended from Francis and Mary Ann Henty. During the twentieth century, items from the collection were modelled in two fashion parades by various descendants [1937, 1959]. The items in the collection are historically and aesthetically significant, with provenance provided by oral and written tradition within or held by the family. A number of the items in the collection are very rare survivors, and provide researchers with the evidence needed to reconstruct the lives of notable women in the Port Phillip District [later Victoria] during the nineteenth and early twentieth century.An ivory silk skirt and matching jacket worn by Alice Henty, aged 22, at the marriage of her friend Lizzie Hopkins and S.T. Staugnton in 1874. The ivory silk satin peplum jacket is boned, tailored, and fitted with many princess line panels. The front closure has handmade embroidered buttonholes and covered buttons. The collar and sleeves are decorated with gathered silk tulle frills. The peplum back features a silk cord bow decoration. The skirt with bustle and train features a central panel with hand ruching and silk satin piping. It is decorated with five rows of pleated silk tulle frills. Measurements (mm): PEPLUM JACKET Girth - Neck 317.5, Chest 914.4, Waist 698.5, Hip 965.2, Cuff 279.4, Hem circumference 1168.4. Vertical - From neck to hem 558.8, Front waist to hem 254, Back neck to hem 838.2, Back waist to hem 241.3, Sleeve length 279.4. Horizontal - Neck to sleeve head 165.1,Cross back 292.1, Underarm to underarm 393.7. SKIRT Girth - Waist 635, Hip 914.4, Hem circumference 3810. Vertical - Front waist to hem 1092.2, Back waist to hem 1701.8. fashion -- 1870s, alice frances (henty) hindson, women's clothing, bridesmaid's dresses

Ribbon - Efficiency decoration instituted in 1935 - Dec 1986. Uniform issued to "BUTTERWORTH/ 15280".Service dress style - khaki colour wool/polyester fabric jacket with belt and trousers. 1. Jacket collar, with two lapel badges, gold and silver crown and shield with cannons and lettering. "ROYAL AUSTRALIAN ARMY ORDNANCE CORPS" shoulder epaulettes with silver and red metal crown rank insignia = MAJOR. Four front pockets. Two top patch pockets with button and two metal press studs on flap. Green and yellow service Ribbon above left pocket. Two lower inset pockets with button down flap. Two metal belt keepers insitu. Buttons - gold colour plastic with shank and metal ring. Buttons have raised emblem - crown and shield with three cannons. Brown colour cotton sateen fabric lining. No manufacturers label. 2. Belt - fabric with gold colour plastic buckle, leather belt keepers and brown plastic buttons. 3.Trousers - fabric with fob pocket, two side pockets and one inset back pocket with concealed button down flap. Button missing. Green colour polyester fabric libning, cream colour cotton waistband lining. Metal zipper fly with plastic button. White cotton label on waistband. 4. Lanyard - red colour cotton cord with knots.3. White cotton label with black ink print "REGIMENTAL NO./NAME" on waistband lining - handwritten black ink 'BUTTERWORTH/ 155280/ 7/ COY".uniform, army, service dress, butterworth

The Excelsior IV Log is a nautical instrument for measuring a vessel’s speed and distance travelled. When navigating a ship it is essential to be able to estimate the boat’s speed and distance travelled to determine its position at sea. In times past the only way to measure a ship’s speed was to throw a wood log into the water and observe how fast it moved away from the ship. In the 16th century, the log was fastened to a rope knotted at set intervals. The log was thrown over the stern (back) of the vessel and a crew member counted the number of knots that were paid out in a set time. From this, they could estimate the speed of the vessel through the water. This was known as streaming the log and is also the derivation of the knot as a measurement of nautical speed. The Walker’s Excelsior Mark IV instrument was designed for smaller vessels, such as yachts, launches and fishing vessels. Historical: Thomas Walker & Son was internationally renowned in the manufacturing of ships logs, founding father , Thomas Walker (1805–1871), an engineer in Birmingham, patented a mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kick starting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ship’s log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (British-based organisation promoting ties and trade with the British Caribbean), being the most common log in use for two generations. It took until 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By the time of his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log and the Walker factory was one of the first to introduce the 48 hour work week for employees. The ship log was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades.Ship's Taff Rail Log, rope attached. Walker's Excelsior IV Log model. Nautical miles dials: units and 10's. "Walker's Excelsior IV Log", "Made in England by Thomas Walker, Birmingham"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, log register, taff rail log, taffrail log, marine navigation, a1 harpoon log, cherub’ log, walker’s excelsior mark iv log, ship’s log instrument, mechanical ship’s log, measure ship’s speed, nautical instrument, navigation instrument, massey & sons, thomas walker, blue brick walker, thomas walker & son, thomas ferdinand walker, 48 hour work week

The two cards of nibs are retail display cards of the dip pen nibs that William Mitchell Calligraphy produced, dating back to around the 1920’s, which was the time of the Great Exhibition in the UK. At that time dip pens with steel nibs were the main writing instruments. British Pens Ltd. had recently formed as a company and its subsidiaries included the the company William Mitchell, which is why British Pens Ltd. is named on the cards as well. One card (1) has the Round Hand nib, which is widely used today for calligraphy scripts. The other card (2) has the Script nib that has round upturned points for monocline or unshaded lettering that is also used for calligraphy. The nibs also have a detachable reservoir. The pen nibs are shaped to fit into a slot in the base of a wooden or Bakelite pen holder. The hole at the front of the nib is for collecting ink from a well, which is then stored in a reservoir at the back of the nib. The nibsare stamped with their nib size and Pedigree (what type of nib it is) and maker’s details. William Mitchell Calligraphy still makes these nibs today with a slightly difference finish. (ref: Sales and Marketing Director of William Mitchell Calligraphy in 2016). HISTORY of the Ink Pen Quills and ink were common writing tools until the early 19th century when the pen trade began mass producing steel nibs and pens. The steel nibs each have a hole in the middle that acts like a well for the ink. When the nib is dipped into the ink well the writer needs to ensure that it is dipped to only just past that well. India Ink was one of the most popular inks used with the nib pens, notable for its satin-like smooth flow. This ink is composed of a particularly fine carbon mixed with water; it can also be obtained as a dry stick that is then crushed and mixed with water as required. The Jewellery Quarter of Birmingham had the largest concentration of independent jewellers in Europe. Birmingham became the centre of the world’s pen trade for many years -, during the 1800’s over 100 factories, employing 1000s of skilled workers, manufactured the ‘Birmingham Pen’. ABOUT WILLIAM MITCHELL CALLIGRAPHY LTD.* (*The following text is quoted from the William Mitchell Calligraphy website) British based William Mitchell Calligraphy has been designing and manufacturing exceptional pens for almost 200 years. The William Mitchell heritage in making pen nibs began whilst working with his brother John Mitchell in the early 1820s. William Mitchell established his own business in 1825 to become one of the leading nib manufacturers and famous for lettering pens. Almost 100 years later William Mitchell merged with Hinks, Wells & Co, another pen manufacturer, to form British Pens, employing around 1000 people in the Bearwood Road area of Birmingham. During the early 1960s British Pens acquired the pen business of other pen manufacturers Perry & Co and John Mitchell, once again reuniting the two brothers. Joseph Gillott, who were famous for their artist drawing and mapping nibs, amalgamated with British pens in 1969. William Mitchell and Joseph Gillott established in Birmingham during the early part of the nineteenth century and [their products] are still proudly made here. British Pens were subsequently purchased by its current owner Byron Head, the owner of William Mitchell (Sinkers) in 1982, and was subsequently renamed William Mitchell (calligraphy) Ltd. Established in 1827 Joseph Gillott was one of the pioneers of mass steel pen nib manufacturing. The company was particularly strong in the American market, prompting Elihu Burrit, the American consul, to write “In ten thousand school houses across the American continent between two oceans, a million children are as familiarly acquainted with Joseph Gillott as with Noah Webster” (The compiler of the famous American dictionary). The company consequently received visits from many notable Americans, including president Ulysses S Grant. The early 19th century invention and mass production of pen nibs such these in our collection had a large impact on education and literacy because the nibs could be produced in great numbers and affordable prices.Pen nibs; 2 cards of steel dip pen nibs from the 1920’s. The steel nibs are attached to cards by 2 rows of entwined cotton cord. Reverse sides of cards have some hand written marks. Manufacturer; William Mitchell, Birmingham, England. Card issued by British Pens Ltd. Nibs have shaped ends, a hole in the centre with a well on the underside, and the tops are shaped approximately quarter circle. Inscriptions are pressed into each nib. The script pens have detachable reservoirs made of a metal different to the nib. (Card 1) Round Hand Pens, 11 nibs remain from card of 12. Printed on card “Round Hand Pens for Beautiful Writing, Twelve degrees of point, Square points. William Mitchell, Birmingham, England. This card is issued by British Pens Ltd. MADE IN ENGLAND” Also printed on top left of card is a pen drawing of a person writing at a desk, background of decorative 3-paned window in brick wall. (Card 2) Script Pens; 11 nibs remain from card of 12. “Script pens fitted with detachable reservoir. William Mitchell, Birmingham, England. This card is issued by British Pens Ltd. MADE IN ENGLAND” Also printed on top right of card is a pen drawing of a person writing at a desk, background of decorative 3-paned window in brick wall. On Card 1, - each nib is stamped with its size, and “Wm MITCHELLS / PEDIGREE / ROUND HAND / ENGLAND” - hand written on front bottom of card in ball point pen “Lettering 5 times size of nib” - hand drawn on back of card in red and blue ball point pen are scribbled lines On Card 2 - each nib is stamped with its size, and “WILLIAM / MITCHELLS / SCRIPT PEN / ENGLAND” - a black circle corresponding to the nib is printed on the card above each nib. - hand written on back of card in black felt tip pen are numerals - hand drawn on back, 4 parallel lines in red ball point pen with the numbers “10” between 2 of the lines flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, william mitchell calligraphy ltd, british pens ltd., pen nib, writing implement, dip pen, round hand nib, script nib, birmingham manufacturer, communication in writing, mass produced pen nibs

The steam engine indicator, or dynamometer, is an instrument used on a steam engine (such as that of a vessel or train) to measure and record the change in the pressures of the engine’s cylinders during their operating cycle. The engineer would use it to identify problems or defects such as bad valve settings or constricted steam pipes. It could indicate the difference in efficiency caused by adjustments made to the engine, being able to instantly measure the variation of pressure from the engine stroke at any given time. This force of power would be registered by a pencil, fitted to the adjustable arm, which would trace a line on paper wound around the cylinder. The recorded information could be used in conjunction with mathematical tables. This particular instrument was made by T.S. Mc Innes, one of the better manufacturers of engine indicators. Mc Innes engine indicators were still being used in the mid 1900’s. This specific instrument was used by Mark Forsythe of North Berwial, Scotland and late of Ararat, Victoria when he was chief engineer on the “SS Talawena” in 1892. The Port of Warrnambool, in Victoria, harboured steam ships that carried both passengers and cargo along the south west coast in the late 1800’s and into the 1900’s. The engineer of a steam ship was responsible for reaching and maintaining the optimum level of steam energy to serve the locomotion and efficiency of the steam ship. The engineer would use a steam engine indicator to measure and record information to achieve this purpose. Engine Dynamometer or Steam Engine Indicator in square, fitted oak case. This brass instrument is used to measure and record steam pressure for setting up and adjusting valves on a steam engine. It has an oscillating recording drum with vertical, silver clip attached for holding paper in place around the drum. The drum oscillates left to right. There is a pulley attached to a length of cord, which is attached to the drum. Beside the drum is a fine metal arm, vertically adjustable, small hole in the end to hold a pencil. Inscription stamped into bracket of the arm. The engine indicator is mounted on a hinged side of the case that swings out ready for use. Attached chains prevent the side from opening past vertical. There is storage for other accessories and an empty compartment in the base (where a scale or ruler may have been located). The case has a collapsible wooden handle, brass hinges and two brass, hook-shaped catches. There is a code stamped inside the lid. It contains a brass, ‘T’ shaped steam-cock (or stop cock) with two open ends made of metal pipe with different sized threads. (Turning the handle on top opens and closes the space in the pipe and would close off the flow of steam from one end to the other.) Also inside the case are three different spiral springs, each with a threaded nut on the end that has a threaded hole inside it. Used by Mr Mark Forsythe when chief engineer on the SS Talawena in 1892 “T.S. MC INNES PATENT” and “522 _ _” (last 2 digits are unreadable) pressed into the arm of the brass indicator. “[ ] X ’ stamped inside the lid of the case. The 3 springs all have a number stamped into them: (1) “32” and “12” (2) “12” and “16” [above] “12” (3) “64” and “150” Card that came with instrument “This instrument was used by Mark Forsythe of North Berwial Scotland and late of Ararat, Victoria when chief engineer on the SS Talawena in 1892" dynamometer, steam engine indicator, t.s. mcinnes, glasgow, dobbie mcinnes, port of warrnambool, warrnambool, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, shipwreck coast, great ocean road

Cream booklet titled Jubilee Souvenir Zenith Lodge Ancient Free and Accepted Masons of Victoria. 1866 - 1916. No 1133 - No 52. Title is inside an embossed oval rope tied at each side. Various embossed symbols surround the oval rope. A blue cord is sewn to hold the pages together with a staple. A Roll of Honour is printed inside the front cover under two flags, a Union Jack and another one like the Australian flag but the blue behind the Southern Cross is red. Jubilee of the Zenith Lodge, No 52, Officers of the Lodge at Consecration, May 1866 is listed, a sepia photo of the Officers 1915 - 16. they are: Wor Bro Dunstan, Wor Bro T L Sargeant, Bro J Langdon, Wor Bro H J Martins, Bro J Leaney,R W W J Parry, R W G W Lansell,Bro G W Bruhn Bro T Cambridge, Wor Bro W Trevena, Wor Bro C E Welch,Bro W G Bowden, Bro T J Banner, Bro A Glen, Bro A G Hamilton, Bro F T Bishop and Bro J Stephens. Golden Lodge, Corinthian Lodge, Masonic Hall. Also listed are Members 1916 and Principal Officers of the Zenith Lodge for the Past 50 years. On the back cover is a sepia photo of the Freemasons' Hall View Street, Bendigo.Cambridge Press Art Printers, Bendigo.clubs, social, jubilee souvenir, masonic society events (various) - jubilee souvenir zenith lodge 1866 - 1916, bro attwood h, bro blair sgt t a, bro crookston rev j, bro dimsey lieut l s, bro harrison sgt h j, bro midgley f s, bro rodger, r h, bro stutt w j, bro wagstaff capt p w, bro ward f h, bro edward garsed, bro samuel peach hogg, bro richard harry andrews, bro wiliam webb, bro john davies, bro g w chaassand, bro thos h o'neill, bro j c duncan, bro john hamlet taylor, cambridge press

Programme of the Bendigo Operatic Society. A Musical Play by Rodgers & Hammerstein ''Oklahoma'' Produced by Norman Lee. Capital theatre Bendigo Opening Friday 14th July 1961 for six Nights. Cast in Order of Appearance: Gertrude Perry as Aunt Eller - Harry Brewer as Curly - Dawn Beckwith as Laurey - Leonard Carr as Ike Skidmore - Peter Houston as Fred - Gerald Gleeson as Slim - Bryan Brewer as Will Parker - Brian Thomas as Jud Fry - Annette Wilson as Ado Annie Carnes - Alfred Annison as Ali Hakim - Wendy Griffiths as Gertie - Emily Westgarth as Ellen - Joan Crane as Viviene - Carol McKenzie as Faye - Ailleen Simmonds as Virginia - Patricia McCracken as Suzanne - Frederick Trewarne as Andrew Carnes - Reginald Boromeo as Cord Elam - Gerald Hayward as Ed - Victor White as Mike - Peter Haines as Jud (In Ballet) - Terry Carr as Curly (In Ballet) - Bronwen Townsend as Laurey (In Ballet). Musical Director: Max O'Loghlen. Society Pianist: Mrs. P.House. Ballet Mistress: Miss M.Welch. Synopsis: ''Oklahoma'' is a musical based on Lynn Rigg's play ''Green Grow the Lilacs''. The Story is set in Indian Territory just after the turn of the century and revolves around the lives of Curly, a cowboy, and Laurey. Laurey is in love with Curly, but to make him jealous pretends to be attracted to Jud fry. Everything is settled at the Annual Box Social.program, theatre, bendigo operatic society

BHS CollectionSage coloured silk long sleeved dress. One piece full length dress. Full length side panels from shoulder to hem. Front of bodice extends below waist line to form two points on either side of front opening. Front opening is fastened with twelve fabric buttons (1-5cm) and button holes. Small standup collar(3cm) fastened at throat with hook and eye. Bodice shaped with two darts on either side of front opening. Small ruched pocket on LHS of bodice at waist level. Long narrow fitted sleeves shaped at the elbow. Decorative cuffs at wrists of ruched frilling (8cm) with triangularturned flap on top edge at back of cuff. Back of dress has four panels. The two centre panels extend below waist to to two points. The centre skirt panel is attached under the centre two panels and is gathered by five deep pleats to form a bustle effect extending to a long train. Front centre panel has horizontal gathering with ruched frills in centre, and at sides. Side panels overlap front centre panel. Hemline has pleated frill above the hem which is finished with cord. Skirt is lined with an open weave, brown cotton fabric. Bodice is lined with brown polished cotton. Hand stitched and machine stitched.costume, female, sage coloured silk dress

Hilda Hill Collection. A Combination of Sepia & Black & White Photos Total of 5. Jonah dressed in light coloured dress with geometric pattern holding a parasol in both hands, background right is a part of a large tent in striped material, to the left is a light post with a sign attached advertising fairy floss, there are a number of people to the left of the post on a sloped surface at Lake Weeroona Bendigo. Four young ladies leaning on a hand rail of a verandah, to the left is a verandah post with a large pot plant at its base, behind the girls at right is a window partly open with a lace curtain, a white piece of rope extends from the post at an angle to a rolled up blind, directly in front of the girls on the ground is a large plant in a garden, the old V.P.S. Girls Alma, Kitty, Lorna and Hilda Hill. Eileen and Claire standing on verandah with hands on the rail, Eileen is dressed in a pale coloured dress and Claire in a white dress with a line pattern longitudinal, Verandah post to their left and cord going to a rolled up blind, large pot plant at base of post, deck chair at far right, foreground shows shadow of the photographer and garden to the right. Oval photo of Nora on the rocks Feb 1921, dressed in white with material over her left shoulder, and small round topped hat. Elma and Jonah both dressed in light coloured dresses, Elma has sailor neck blouse and her dress has a horizontal line pattern, background right is an old car and behind the girls there are large trees,The Rock 1 January 1923.Hilda Hill Personal Collectionaustralia, history, victoria post war touring boom

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots.The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century.Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic (as is item 8535.1). The second type has a post in the center where the thread is wound (e.g. item 8535.2). The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace. One type of tatting shuttle produced by "Aero" from the 1930's to the late 1960's was an anodized grey coated aluminium shuttle with a sharp pick at one end. In the 1970's it was superseded by the grey plastic "Aero" which has a removeable bobbin which you can put on the end of the shuttle to make thread winding easier and an embedded crochet hook for joining picots. The "Aero" company developed in Redditch, England - a town renowned as a centre for manufacturing needles. Firms run by Henry Milward and Abel Morrall were based in Redditch and by the 18th century Redditch was manufacturing one million sewing needles per year. Abel Morrall Ltd launched the "Aero" brand in 1936 and greatly expanded the firm's product line to include tatting shuttles and knitting needles. The classic plastic "Aero" tatting shuttle was manufactured in England from the early 1970's until the 1990's. These items are significant as examples of easily accessible handiwork tools that enabled women in the 1930s -1960s to be able to decorate and personalize their household linen and clothing.Shuttle no. 8535.1 is a beige, boat shaped plastic shuttle with enclosed ends, small round central indentations on both sides and an enclosed black removeable bobbin. The shuttle has a grooved point at one end to hold a bobbin and a small metal crochet hook at the other end. Shuttle no. 8535.2 is a beige, boat shaped metal shuttle with pointed ends that are open but snug, small round central indentations and two smaller circular markings (on both sides) and two internal posts with cream thread wound around.Shuttle no. 8535.1 - "AERO" / "ENGLAND" Shuttle no. 8535.2 - "AERO' / "ENGLAND" "39c" (written in ball point pen)flagstaff hill maritime museum and village, flagstaff hill, warrnambool, shipwreck coast, great ocean road, tatting shuttle, aero company, handwork, handwork tool, craft, handcraft, needlework, tatting

Photo Album - brown cards covers, containing 12 heavy card sheets bound with a brown cotton cord titled "Types of Passenger Shelters MMTB". Ten sheets have two photos of shelters except for the last one giving location and cost. Sheet 1 - Two shelters at Wattle Park 2 - Batman Ave and Peel St; Flemington Road with cable trams in the background. 3 - Victoria Parade and Smith St; Ballarat Road and Gordon St Footscray 4 - Dandenong Road and Hawthorn Road Caulfield; photos of the standard shelter, 6 Number, for St Kilda Road, Alfred Hospital and Gisborne St East Melbourne. 5 - East Kew terminus; Camberwell Road and Smith Road 6 - Oakover Road and Gilbert Rd Preston, Flemington Road at Abbotsford St North Melbourne 7 - Swanston St and Grattan St Women's Hospital with a Bundy clock and street fire alarm in the view; Victoria Parade Fitzroy opposite Eye and Ear hospital with a W class tramcar and the Eastern Hill fire station in the background. 8 - Two photos of the shelter at the corner of William St and Collins St Melbourne. 9 - Toorak Terminus; Rennie and Nicholson St Coburg 10 - Market St terminus City. Images taken from the website production 16-1-2019 - see - http://www.hawthorntramdepot.org.au/papers/shelteralbum.htm On inside back cover is a Kodak label "Scroll" with "3" entered in ink. Date unknown, thought to be mid 1930's - see Reg item 3361 of the construction of William St shelter post 1933.in black ink "Manager" in top right hand corner.trams, tramways, shelters, mmtb, wattle park, victoria parade, st kilda rd, flemington rd, toorak, camberwell, market st, coburg, footscray, preston, caulfield

Clothing. Four Collars a. Stand-up lace collar with a shallow scallop at the lower neck edge-6 cm -7 cm deep. Three ''stand-up'' flower motifs and other flat floral motifs form the lace. Five boned and wired casings keep the collar erect. At the centre lower edge fine, cotton fabric is gathered tightly and forms a 10 cm long, fan shaped drop or jabot which in turn has a shield shaped crochet drop 12.5 cm deep with corded and cut-work elements. The stand-up collar is lined with fine cotton net, and fastens at the back with three metal hooks, but no loops are evident. b. Very fine creamy silk (?) stand-up collar. 4.5 cm deep, with a 32 cm deep jabot front. The same lace as the collar, edges the Vshaped front jabot. In the centre of this jabot is a stylized maltese cross, which also features at the front of the collar. No fastenings are visible at the neckline. c.This item is of the same design as 14.b, but is slightly larger.Cream cotton or silk, the collar is 6 cms deep at the centre front, and features a Maltese Cross shape at the centre front of the collar, and the jabot front. Ten floral motifs are spaced around the collar, and the same lace outlines the edges of the jabot front. No fastenings are evident. d. Collar. 8.5 cm deep at the centre back, shaped to 6.5 cm deep at the centre front. Jabot 2 cm wide at top, 10.5 cm wide at lower edge, then shaped to a point at the very lower edge. Floral elements and eyelets form the design. Centre back has six eyelets at each edge-perhaps laced to fasten. Two 5.5 cm long x .3 cm wide bones are encased on the front of collar, to support it in the front.costume, female, lace collar and jabot front