Items in a collection relating to Edward Judd, refer Cat No 7410 for his service details.1. The main body is a 'U' shaped section, with an extension going out further (4cms). At the end if that extension is a small spiked wheel that rotates. The spikes are approx 3mm long. Other accessories on the spur frame are two leather straps of width 1/2" (12.5 mm) and a pivoted buckle permanently on one side of the spur frame. 2. Same as No. 1 except the spikes are missing at the end of the spur and part of one strap is missing.horse equipment, saddlery, spurs

Ski skins and webbing were introduced into the Victorian Alps by European skiers. Enthusiasts travelled to enjoy the snow and to explore the Victorian Alps including the Bogong High Plains. This equipment enabled them to travel over snow without slipping when going up hills. They took the skins off when they wanted to slide down hills. In later years waxes were used for cross country skiing and then 'fish tail' markings on the back of skis to enable skiers to travel distances up and down mountains. Later developments also included motor transport (replacing horses to get to the snow line) and roads to take skiers to the ski fields and mechanised tows to take skiers up mountains so they could ski down (downhill skiing).Skiers visited the Bogong High Plains especially during the years of the State Electricity Commission of Victoria's construction of the Kiewa Hydro Electric Scheme from the 1930's onwards. Tourists to the area increased during this time and influenced the development of Falls Creek.Long cream strips with soft short 'fur' on one side and a type of strong hessian on the back with the length of the middle and sides stitched. At one end an adjustable strap is attached to a steel, hinged clasp and at the other end is a loop that fits over the ski. A quarter of the way from each end is a steel attachment for fastening over the ski - the 'toe' end with a rubber embossed flap and the other with a short and long strap each with a steel ring at the end.On the rubber attachment: 'vinersa/pat uno'ski skins; bogong high plains; falls creek

This is the seat from the aeroplane of Basil Watson. Photographs held by the Warrnambool and District Historical Society confirm that this was Watson’s aeroplane seat. He was a pioneer aviator who had built his own plane which was 5.5 metres long with a wingspan of 8 metres. It had a 7-cylinder 50 HP rotary Gnome engine. Basil Watson flew this aircraft to Warrnambool in January 1917, becoming the first person to fly to Warrnambool, coming from Point Cook in one hour 55 minutes – an Australian cross-country flying record at that time. Watson amazed Warrnambool crowds with his dare-devil flying, looping the loop 14 times over the Warrnambool racecourse. He also brought with him the first aerial post to arrive in Warrnambool and the Warrnambool and District Historical Society has the letter he brought written by the Lord Mayor of Melbourne to the Mayor of Warrnambool. Two months after he was in Warrnambool Basil Watson was killed when his plane crashed near Point Cook in March 1917. Parts of the plane were salvaged and the seat was donated to the old Warrnambool Museum in 1918. It remained there until the museum was dismantled in the early 1960s and it was later passed over to the Warrnambool and District Historical Society. The tag on the seat today is an old Warrnambool Museum label. This is a most significant item as it is the original seat from the aeroplane of Basil Watson, an important early aviator in Australia’s history and it is also an early 20th century memento of the many treasures from the old Warrnambool Museum (1883-1963). The seat shows the primitive nature of early 20th century aeroplanes in Australia. This is a metal (galvanized iron) seat with a semi-circular base and a curved back stretching around from one end of the base to the other end. The back has a rolled metal edging on the base and the top. On the sides are two slots with a khaki-coloured cloth strap passing through the slots. This strap has a metal buckle at the end. The metal in the seat is somewhat blotched and discoloured. A luggage label is tied to one of the slots and has a name typed on it.Mr Watsonbasil watson, aviator, old warrnambool museum, history of warrnambool

These braces of the type known as ‘Police & Firemen’ were originally worn mostly by men wearing a uniform of some sort – police, firemen, members of the armed forces, postmen, other government officials etc. Later the braces were worn by men, mainly workmen, wanting a durable, good quality item to hold up their trousers. Braces are still worn occasionally by men today, mainly as a fashion item. These braces have no known local provenance but are retained as an example of an item of clothing worn by men 100 years ago. These men’s braces have a loop of long heavy quality elasticized cotton held at the top with a metal clip and with the loop forming two long ends made by a leather clamp near the top. The ends of the two cords have metal clips and two leather straps at each end with eyelets for attachment to buttons. The top of the loop also has two leather straps with eyelets. The cords or loops are adjustable and are woven in red, blue and cream patterns. Police & Firemenvintage men’s wear, history of warrnambool

Strong large cane wicker baskets such as this one were used for storage and transportation. This basket could have been used for storing sails on a vessel, or sending luggage, parcels or goods by rail, ship, wagon or cart from one location to another. The basket would also be suitable for laundry in hospitals, factories such as woollen mills, and other organisations for storing and moving equipment and goods. The inscription " A A S" has not yet been researched. It could be the name of an Australian- Service, or a - - Ship or even the initials of a person. This basket is an example of a large, strong container used for storage or transportation during the 19th and 20th centuries.Basket, natural coloured woven cane or wicker, rectangular shape with lid. Two leather straps and buckles fasten the lid to the basket. The basket has a strong rope handle on each side, metal reinforcing straps that support three wood strengthening lengths on the top of the hinged lid. The lid is hinged to the basket at the back with metal hinges. The inside frame is reinforced with wood. There is a large inscription in black paint is stencilled onto the lid of the basket."A A S"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, basket, sail storage, maritime furniture, luggage, transport storage basket, wicker hamper, vintage wicker chest, wicker trunk, cane storage basket, dispatch basket, a a s

The spider harness was specifically designed for fall protection at heights and in any hanging direction.It can be used in rescue situations. It is a fully adjustable harness.A leather harness with chains (called a spider). A round piece with leather straps threaded through and chains attached to both sides. It has metal (brass?) rivets. On each end is a large hook.harness-spider

This tripod was used to measure the height of distant points relative to a known point used in surveying and construction. The older levels consist of a telescope fitted with a spirit level and, generally, mounted on a tripod. Modern levels are automatic.This tripod was used in the Kiewa Valley by a Mt Beauty resident.Wooden tripod with pointy ends and with metal hinges at the top to collapse. It has a leather strap attached by a button press stud towards the pointy end. This is to enable the legs of the tripod to be fastened together. cowley tripod; surveying; kiewa valley;

Issued to soldiers for protection from gas attacks during World War 2. Plastic Eye Protection for use and instructions on how to react.1. Hard cardboard case, brown in colour, with green writing instructions. 2. 3 sets of tinted eye shields with purple elastic strap that goes around head in between paper.1. Cardboard case has detailed instructions on treatment of person and equipmentin relation to gas contamination and instructions on a gas attack.passchendaele barracks trust, eye protection, anti gas

Items belonging to; DAVID DIXON RAN R112262. Refer Cat No 5215.5 for his service history.1. JACKET, BOMBER - WOOL/POLYESTER, BLACK. 2. TIE - POLYESTER, BLACK. 3. CAP or 'LID' - PLASTIC, WHITE, BLACK TALLY BAND, GOLD EMBROIDERY, BLACK CHIN STRAP. 3. HMAS KUTTABUL.uniform, navy, ran

Ernest OLD. Records show that he enlisted for the Boer War No 2356 on 11.7.1902 in the 2nd Australian Commonwealth Horse age 27 years. On 10.8.1912 he enlisted in the 17th Aust Light Horse No 84004 D Troop A Sqd. He then enlisted in the AIF No 77, 13th LH, HQ & Machine Gun Section aged 40 years on 22.12.1914. Embarked for Eygpt 28.5.1915. Embarked for Gallipoli 4.9.1915. Hospitalised 24.12.1915 with Parotitis / Mumps. Hospitalised 23.1.1916 with Debility. Transferred to 2nd Pioneers 14.3.1916. Embark for France 19.3.1916. WIA 14.11.1916 GSW thighs severe. Medically downgraded to C3. Returned to Aust 20.12.1917 re wounds and overage. Discharged from the AIF 27.3.1918. He then went back into 17th LH until 1933 with the rank WO 2 in Stores.Australian Lighthorseman Slouch Hat with pugaree, emu plume, badge & leather chin strap with metal buckle. The badge has the devil above a half wreath of leaves on a round red Petersham On Badge: "13/ALH" Handwritten inside crown: E. Old 7' (Size) Adelaide HATS COY 1028armed forces, military uniform, costume, hats, australia, male

.1) Hat RAN oval shape, white top, black hat band with gold lettering, chin strap black cloth. .2) Hat band, RAN, black, gold lettering..1) " HMA PATROL BOAT" .2) "HMAS LABUAN"uniforms - navy, costume - male headwear

Pair WWII dress gaiters, khaki canvas material with leather straps & brass buckles. .1) Leather reinforcements are brown smooth leather. .2) Leather reinforcements are black textured leatherInked by hand on 1.) “M (?) J Dunbar” & (?) “M Field”uniforms - army, passchendaele barracks trust, gaiters

American style helmet used by the Australian Army.Helmet, steel with fibreglass lining, leather band & green webbing on inside of lining. Green material chin strap secured with metal buckle. Helmet covered with strips of camouflage material & hessian.Inside: “WHI869 Cat No 8415.50.758.5792”uniforms - army, costume - male headwear, trades-leatherworking

.1) Inner lining of steel helmet. Khaki coloured pressed fibre shell with webbing framework inside. .2) Steel helmet with a khaki cotton camouflage covering & 2 chin straps.Written in white paint: 38-(?)-5(?)uniforms-army, costume accessories-male headwear, protective

Standard Australian Army webbing map case with shoulder strap. This map case is complete with a folded Australian Survey map of Puckapunyal, Victoria produced in 1988. Inscription BHG Ltd 1945

This style of bonnet was commonly worn outdoors by women in South West Victoria in the late 1800s - early 1900sThe bonnet is significant as a typical of women's outdoor headwear in Australia in the late 19th and early 20th century.Ladies outdoor bonnet, white cotton with narrow mauve stripes and small flowers. Bonnet is trimmed with frills and straps to tie under the chin. Dated late 19th to early 20th century.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ladies bonnet, outdoor bonnet, hat, bonnet, headwear, ladies clothing, late 19th century bonnet, early 20th century bonnet, women's fashion, australian fashion, australian millinery

Used in the Electrical Engineering Laboratories as a source of low frequency signal - for communications. Used by Bill Rofe and Colin Kline.Beat Frequency Oscillator (signal generator) AWA typy 14R7077, Range 0-13 kcycles, in a grey wrinkle-type finish metal box with a leather strap carry-handle on top.scientific instruments, beat frequency oscillator, bill rofe, colin kline

Clothing. Orange silk full slip petticoat. V shaped neckline front and back with decorative spoke stitching 2cm below edge. 1.3 cm shoulders straps. Unshaped at bustline.costume, female underwear, orange silk full slip petticoat

White metal cigarette case with JLB in black letters on top left corner of front of case. It has a hinged opening with gilded interior. Has a yellow strap to hold cigarettes in place.Inside bottom edge: 23 Front: 'JLB' in black letterscigarette case

Made by internee at Camp 1A pair of open toed leather lattice sandals fastened with a ankle strap and metal buckle, metal toe caps with 5 tacks attached to sole. Leather sole has been replacedsandals, leather, montgomery j, camp 1, tatura, ww2 camps, costume, male, footwear

This item was used by women to enhance their figure (body) and hold their stockings in place. Although still sometimes used they were mainly used prior to the making of pantyhose approximately 1960.Pink floral embriodered cotton material corset with stays, elastised inserts, metal hook and eye closure, two lace-up sections with elastic straps and metal buckles, four suspendersTag "Gross/Support"clothing and dress, george evans collection

Vintage fire fighters helmet - Red in color and depicts station Captain. Associated with Country Fire Brigade, Red colour helmet is associated with the station Captain. Red Fire Fighter's Helmet CFA (Country Fire Brigade). Color Red depicts the helmet is worn by the Station Captain. The chin strap is made of a khaki coloured cotton hessian material. Black painted inscription on the front of the helmet : CFA Captain.red fire fighter's helmet, vintage 1940's red fire fighter's helmet, captain's red fire fighting helmet

Australian men's bag from the opening ceremony of the Sydney 2000 Olympic Games. Designed by Mambo Graphics.Shoulder bag, courier type; green and yellow fabric with the Southern Cross constellation embroidered on the yellow section. Large front flap, grey webbing shoulder strap and green shoulder pad.fashion, woolmark company mambo graphics, sport, uniforms, the woolmark company 2000 australian olympic display - exhibition (21/12/2001 - 24/05/2002)

Part of Bette Jones collectionDeep beige linen apron with bib. Bib and skirt embroidered with flowers and leaves in pinks and greens. Apron edged and trimmed with cotton lace. No straps, so either designed to be pinned on or unfinished.costume, female working

A travelling case used to hold two tennis racquets to leather and metal straps, one across the inside of the lid, and the other across the base. Materials: Metal, Cardboard, Plastic, Cloth, Leathertennis

R&M Dower was a major millinery partnership located at 146 High Street, Kew in the 1940s and 1950s. Examples of this millinery firm's hats are in other major public collections, including the National Gallery of Victoria.The Kew Historical Society’s fashion and design collection is comprised of costumes, hats, shoes and personal accessories. Many of these items were purchased or handmade in Victoria; some locally in Kew. The extensive hat collection comprises items dating from the 1860s to the 1970s. Most of the hats in the collection were created by milliners for women. There are however a number of early and important men’s hats in the collection. The headwear collection is particularly significant in that it includes the work of notable Australian and international milliners.A circular black velvet brimless woman’s hat with a ribbed grosgrain strap at the back. The hat includes a small label identifying the maker as R&M Dower of 146 High Street, Kew.Label: "Phone WM8527 / R&M Dower. 146 High Street Kew"fashion accessories, hats, women's clothing, r&m dower

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories. This dress is one of a number of items donated to the Fashion Collection by Annie McIntyre.The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s.Black acetate top and skirt. The short top includes a pleated border and shoulder straps, The full dress of the same fabric and colour is comprised of layers to emphasise its natural flaring quality.Label: Tussicocktail dresses, australian fashion - 1980s, women's clothing, evening wear, mcintyre collection, annie mcintyre, tussi