The Schweizer SGS 2-12 or TG-3A as officially certificated is a glider that was designed in 1941-1942 and produced in United States of America from 1942 for training of military glider pilots. It is understood that over 100 TG-As were supplied to the USA military and at the end of the war many were sold off as surplus. Fred Hoinville imported the Museum’s TG-3A into Australia in August 1950. It is understood that it had been built in 1948 and given construction number G15. On arrival in Australia it was assembled at Bankstown aerodrome and delivered by aero-tow behind a DH Tiger Moth to Camden where Hoinville’s club, the Hinkler Soaring Club, was based. Hoinville’s TG-3A performed well at the Hinkler club in 1950-1951. Several altitude records (including a solo flight to 8000 feet by Grace Roberts – a national women’s record) were set and many soaring flight made over Camden. However, it was badly damaged in a crash landing on 15 April 1951. The glider was repaired after the crash at Camden. It is likely that modifications were made to the cockpit canopy at this time. There were three configuration tried at various times: the original dual cockpit canopy as was standard for TG3As; an unusual dual bubble canopy set up; and a single canopy over the forward seating position (in effect converting the glider to a single seater). When the glider was flown by Hoinville at the 1958 Australian Gliding Championships at Benalla, Victoria in January 1959 (refer The Age Newspaper, January 10, 1959 p.21) it had a single canopy. Records show that the glider was entered on the Australian register as VH-GDI on 6 May 1957. And the Logbook commencing in 1959 shows that ownership passed to the Port Augusta Gliding Club in South Australia on 16 August 1959. Inspections were carried out at that club and airworthiness certificates renewed in 1965. The logbook record indicates that VH-GDI had 1191 flights with an aggregate time in the air of 197 hours at the Wilmington Road Airstrip used by the Port Augusta Club. The glider was transferred to the Cooma Gliding Club, New South Wales. Flying at Cooma began in November 1966 and continued until August 1969: the glider was in the air a further 108 hours from 1067 flights. The last recorded technical inspection of the glider was conducted on 28 September 1968. The glider then passed on to Bill Riley on 20 March 1980 who stored the glider until March 2004 when it was collected by the Australian Gliding Museum. It is not clear whether the current poor state of the airframe is due to accident damage or the conditions under which it has been stored over many years or a combination of factors. Although in poor condition, this exhibit is the sole example of a TG3A ex-US military aircraft in Australia. Further the connection with the story of well-known power and glider pilot Fred Hoinville adds to its historical significance. Tubular metal framed fuselage (without covering and fittings), wooden rudder (no covering) and in damaged condition, wooden fuselage component (formers for fuselage top), Parts of control mechanism, Wooden stringers, Wooden wings without fabric covering and in damaged condition, Ailerons, Tailplane /Elevator without fabric covering, Perspex bubble canopies.australian gliding, glider, sailplane, schweizer, tg 3a, hoinville, roberts, hinkler soaring club, port augusta gliding club, cooma gliding club, riley

Document: McColl, Rankin & Stanistreet Collection: Central Deborah Gold Mine NL - bank statements of Central Deborah Gold Mining Co. NL with ANZ Bank. Brown paper wrapper tied up with brown string contains bank statements. Handwritten summary prepared by Chris Bradley ( 2009 ) inserted in front of archive.organization, business, central deborah gold mine, mccoll, rankin & stanistreet collection: central deborah gold mine nl. bank statements, accounts

A wooden racquet with a convex throat, and grooved octagonal handle. Butt cap seems to be tarred cloth. Decal inscription across crown of head,and throat of obverse: BELLEMERE/PENNANT. Company logo is a pennant, in front of crossed racquets, and supported by two balls. Materials: Wood, Gut, Glue, Lacquer, Ink, Metal, Cloth, Stringtennis

A Dayton tennis racquet, with a steel head, and small, open throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Wooden section repainted red, with a synthetic handle grip wrapped around the lower handle. Materials: Wood, Metal, Glue, Lacquer, String, Paint, Synthetic materialtennis

Yields information about the stringing of the overhead for various temperatures and span - would have been used in the field.Duplicate copy - Memo from Electrical Engineer to General Superintendent, dated 26/3/1939, giving "Electric Railway" stringing tables for 3/0 grooved wire on 40 and 80 for spans, against given temperatures. Has initials ET/MB/LH in bottom left hand corner. Copy to Electrical Superintendent.trams, tramways, overhead, trolley wire

Object. Round Art Deco Chocolate Box. Pink Roses & Garden Leaves Around Sides & 1920s Girl In Centre of Top. Girl has bobbed hair, yellow sleeveless & backless dress with long string of pearls cascading down her back. She also has a pearl bracelet above her elbow.MacRobertson's Box Factory.domestic equipment, containers, chocolate box

An oval, wooden racquet with a laminated concave throat. Decal of company trademark features on throat of obverse. Within a football device is the inscription: TRADE MARK/SCHMELZER'S/KANSAS CITY/SPORTING GOODS. Stamped inscription along right side of stem: THE/SCHMELZER COMPANY. Materials: Wood, Gut, Metal, Ink, Glue, Lacquer, Stringtennis

A Wilson Famous Player Series, Alice Marble Finalist tennis racquet. Base of head features Wilson logo. Shaft features decal head and neck illustration of Marble. Butt cover features 'W' trademark. Materials: Wood, Nylon, Leather, Adhesive tape, Ink, Glue, Lacquer, Metal, String, Paint, Ribbontennis

A Wilson Jimmy Connors Champion tennis racquet. Base of head features Wilson logo. Shaft features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features X-formation perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, String, Plastictennis

A Wilson Jimmy Connors Victory tennis racquet. Base of head features Wilson logo. Shaft features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features X-formation perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, String, Plastictennis

A Wilson Jimmy Connors Victory tennis racquet. Base of head features Wilson logo. Shaft features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features X-formation perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, String, Plastictennis

A Regent Hawk New Model tennis racquet. Regent logo features across the base of the head. Model name, with a linear image of a swooping hawk feature on the throat. Inscription along shaft: TOURNAMENT FULL OVERLAY. Materials: Wood, Nylon, String, Glue, Lacquer, Metal, Ink, Paint, Leather, Adhesive tape, Plastictennis

A Regent Hawk New Model tennis racquet. Regent logo features across the base of the head. Model name, with a linear image of a swooping hawk feature on the throat. Inscription along shaft: TOURNAMENT FULL OVERLAY. Materials: Wood, Nylon, String, Glue, Lacquer, Metal, Ink, Paint, Leather, Adhesive tape, Plastictennis

A travelling case featuring curved metal panels across the base, creating compartments to house tennis balls and at least two racquets. Three cloth straps feature along the underside of the lid, probably also used to house racquets, or other equipment. Materials: Metal, Cardboard, Wood, Plastic, Cloth, Paper, Leather, Stringtennis

Commemorative limited edition (5/30) collage from 'The Kooyong Collection', featuring digital print reproduction of photograph of doubles team Brookes/ Wilding playing against Alexander/Wright at 1908 Australian Championships. Certificate of authenticity adhered to back of frame. Materials: Paper, Ink, Wood, Glass, String, Adhesive label, Cardboardtennis

Tin Hat Day was started in 1922, following WW1, as a fundraiser for the RSL. Money raised was for returned servicemen who were doing it tough following the war and during the Great Depression.Tin Hat Day Collector's Permit: Cream Oval label with blue cotton string through a hole for attaching.. In blue print * Returned Soldiers League War Service Fund (Affiliated with the A.C.F.) Tin Hat Day. Sept. 6th 1940 Collector's Permit. Thorold Fink, Chairman 1940 No. 992. Box 625military, world war 2, returned soldiers league, tin hat day. thorold fink.

Initially listed as T J Connelly's Tin shop, this premises on the corner of High and Forest Street, expanded to include all items of ironmongery. By 1878 they were advertising gas stoves for sale and installation.The item is alphabetical customer list of T.J. Connolly, Ironmongers, Sandhurst. Each handwritten page lists the customer name and order number. Note: corresponding orders are not in this book. The book does not have a date reference in it. The book has a flexible cardboard cover and the pages are bound together with string. This item is part of the Margaret Roberts Collection.There is a black mark at the bottom right-hand side of the front cover. There are some grey lead notes on the inside front cover. There are two mirrored ink marks on the back inside cover and last page.margaret roberts collection, ironmongers, forest street, bendigo businesses

Stem pessaries were instruments used for rectifying uterine displacement, either ante or retroversion. The pessary consisted of a stem and bulb or ball. The stem was introduced into the vagina, and the bulb rested against the cervix/uteri. An external wire frame could be attached to the bulb. The wire frame would be positioned to press on the pubis, thus keeping the pessary in position in utero. Although this pessary has been recorded as Peaslee's it is very similar in appearance to Thomas's galvanic stem pessaries. Stem pessaries were used in rectifying uterine displacement, either acute or retroversion. A pink tag was attached by string to one of the stems inscribed "Peaslee's/ Uterine/ Stem " "...?TID" on other side.Two Peaslee's intrauterine stem pessaries. Copper single stem pessaries with rounded top, stamped with the number seven on the top.intrauterine device, pessary

The Warrnambool Examiner was founded by John Wilkinson and Richard Osburne in 1851. After a gap of a couple of years Richard Osburne resumed publication in October 1853 and continued until October 1867. William Fairfax and Henry Laurie then leased the paper (1867 to 1872) before Richard Osburne again became the proprietor from October 1872 to April 1878 and from December 1879 to December 1880 when publication ceased. Richard Osburne was a pioneer settler in Warrnambool, arriving in 1847. He was prominent in community activities in the town and was a most important early historian, publishing his seminal work, ‘The History of Warrnambool’ in 1887, using the Warrnambool Examiner newspapers to assist with this history. Fairfax and Laurie were the proprietors when these papers were printed. William Fairfax was a member of the Fairfax family that were, and still are, associated with the publication of many Australian newspapers and Henry Laurie later became well-known as a Melbourne University Philosophy Professor. These original newspapers are most important because they contain much information on Warrnambool’s early history and are a primary source for historians. These papers are also of importance to historians today as some parts of these newspapers were not filmed and are not currently available on microfilm. These papers were in a Warrnambool City Council storage area and it is surmised that they have come from the old Warrnambool Museum which no longer exists.These are the original Warrnambool Examiner newspapers from 1st October 1867 to 31st March 1868. They are bound with a tattered cardboard cover, dark blue binding and string. These broadsheet papers are of two pages printed back to back and were published on Tuesdays and Fridays. They are unmarked and generally in good condition but there are some torn pages. There is one loose page. warrnambool examiner, richard osburne, william fairfax, henry laurie, warrnambool

This photograph album appears to have belonged to Agnes Ardlie. She was the daughter of Arthur and Ethel Ardlie of Warrnambool, the grand daughter of the prominent Warrnambool lawyer, William Ardlie and his wife Mary and the great granddaughter of John and Mary Ardlie, pioneer settlers in Warrnambool. Agnes Ardlie (1915-1993) and her sister Dorothy lived for some years at Aroona, 19 Princess Street, Warrnambool. This album is of interest as the photographs are of Agnes Ardlie and her extended family in the 1920s and 30s and thus provide an insight not only into the lives of a prominent Warrnambool family but also gives us a glimpse of the social aspects of the lives of the more affluent families in Warrnambool during that period and of the custom of keeping photograph albums to preserve the photographs.This is a soft cover photograph album with a light brown cover bound with white string. The front cover has an imprinted decorative pattern on the left side and there is a maker’s stamp on the back page. The album contains 22 pages, most of which have black and white photographs inserted. There are 44 photographs, some of which have been torn. ardlie family, history of warrnambool

Photograph. Cohn Bros. Collection. Black & white photo of a man operating a bottle filling machine. The bottles travel on a conveyor to the filling point. They travel past a large container with a gauge on the top. There are other various pipes and pieces behind the man. He is wearing a bag apron tied up with string. ML45/3 (written on the back).organization, business, cohn bros, cohn bros. collection, bottle filling machine, brewers, cordial & aerated water manufacturers

used by POW's at camp 13, made by Albert Jahn, an internee.Carved wooden miniature chess set (31 pieces). 2 kings, 2 queens, 4 bishops, 4 knights, 4 rooks, 15 pawns. A khaki bag with a draw string top for storage. 15 pieces made of dark coloured wood. 16 pieces made of light coloured wood. (1 piece missing)albert jahn, chess set, miniature chess set, pow games, internment camp board games

Wooden pull-along horse painted white on red wheels. Horse has pink-orange fibre mane and tail. Blue saddle. Soldier is riding the horse - red jacket, black hat, light blue trousers, black boots. String attached to horse for pulling along. As you pull it along the head moves up & downtoys, children, pull-along toy, horse, soldier, presents

A wooden tennis racquet with composite concave throat. Octagonal handle with this deep grooves and small trace of leather end wrap. Decal printed across throat on obverse states: OXFORD. Decal across throat on reverse depicts a shield with crown and ducks and states: CADILLAC. Materials: Wood, Lacquer, Metal, Glue, String, Ink, Leather, Guttennis

A wooden racquet with a 13 1/2 inch head. Inscription along the throat of obverse: PERFECTION. Inscription across the throat of reverse: HARRY C. LEE & CO./NEW YORK. Manufacturer details also along side of racquet stem. Materials: Wood, Glue, Lacquer, Ink, String, Gut, Leather, Metal, Cloth, Plastictennis

A wooden racquet with a convex throat, and a grooved, octagonal handle. Throat on obverse features decal inscription: AZTEC. Throat on reverse features a decal of a crowned garter with the inscription: E. KENT. Company logo also impressed in gold upon brown butt cover. Materials: Wood, Glue, Lacquer, Metal, Gut, Ink, String, Leathertennis

A wooden racquet featuring the decal inscription, along the throat on the obverse: BIG BILL TILDEN JR. Throat on reverse features red, gold and black decal of company logo, with the inscription 'CHAMPIONSHIP' across a ribbon situated in front of a tennis trophy, within a quartered shield. Materials: Wood, Gut, String, Leather, Metal, Ink, Glue, Lacquertennis

A Dayton tennis racquet, with a steel head, and small, open throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Small metallic plaque on shaft on obverse, with image of tennis player, reads: DAYTON/STEEL/RACQUET. Materials: Wood, Metal, Glue, Lacquer, String, Paint, Leather, Inktennis

A Dayton-built, Wilson Indestructo, wholly metallic tennis racquet, with a wood or cork fibre handle grip wrapped around lower shaft. Strung with piano wire along and across head and open throat. Model and manufacturing details engraved into underside of butt cap. Materials: Metal, Glue, Paint, String, Cord, Wood fibretennis

A wooden racquet featuring the decal inscription, along the throat on the obverse: BIG BILL TILDEN JR. Throat on reverse features red, gold and black decal of company logo, with the inscription 'CHAMPIONSHIP' across a ribbon situated in front of a tennis trophy, within a quartered shield. Materials: Wood, Gut, String, Leather, Metal, Ink, Glue, Lacquertennis