This dress was made for the Melbourne Show in 1993 and won 3rd prize. It was designed by Jean Inglis who was inspired by the Blue Triangle Butterfly (Scientific name: Graphium sarpedon choredon). The Warp was 2/24 commercially brought black wool with a “tie down” thread of black polyester and Weft of the same 2/24 wool 2 ply. Jean utilised a twill technique devised by Theo Morgan in creating the dress. The dress was handwoven by Jean Inglis with the help of Ruth Rondell with some of the pattern and final sewing. Black dress stretching from below the knees, reaching up to the neckline and down to the hands in the sleeve. The dress has three butterflies attached to the front approximately 50mm in diameter going from right knee to left hip in a nonvisible diagonal line. Lower half of dress has ten thin blue & green lines of varying lengths, reaching a max height of the hip. The neck of dress has four frills of blue and green colour. The longest two frills are in the centre pointing diagonally outwards towards the hands. The second layer of frills is shorter and further around the neckline towards the shoulders. The dress is completed with a cape of blue and green colour with a thick black seam separating each segment of colour. The cape sits on the shoulders and droops to a height of the hips. At the rear, the cape reaches the height of the rump. The cape has two draw strings for tying to the shoulders. wool, butterflies, melbourne show, butterfly

Wax matches also known as 'strike anywhere' were invented in 1826 by William Newton in England. It consisted of a wax stem with embedded cotton threads and a tip of phosphorus. Cases of various styles were introduced to protect against accidental combustion. This simple but robust metal cylindrical box with close fitting cap made it attractive to soldiers in World War One. Bryant & May was a British company created in the mid-19th century specifically to make matches. In 1901 they acquired the rights to the Swan Vesta process.Match cylinder with press on lid.On cap " Bryant & Mays Wax Vesta London"match, bryant & may

The elaborate fancy cotton braid known as Cornelli work on this jacket is a technique of embroidery or applique of cotton thread and braid that became popular in the nineteenth century. It was used on French doll's clothing where elaborate the Cornelli wear was stitched on for decoration. The examples used in this family also included that on men's railway uniforms and bandsmen's uniforms. This jacket belonged to Eleanor Burke (nee McKew) Mrs Mary Taffe's mother and came to Hymettus at Ballarat when she arrived here to live from Donald with husband Michael in 1945.This jacket displays elaborate fancy cotton stitching and braid known as Cornelli work, a technique of embroidery or applique of cotton thread and braid that became popular in the nineteenth century. This lady's jacket is a good example of a style popular at the end of the nineteenth, early twentieth century.

After years of precursory surveying, debate and proposals the most ambitious civil engineering project of the day, the Overland Telegraph Line, began construction in September 1870. Superintendent of Telegraphs, Sir Charles Todd led the construction through “terra incognita,” guided by the precursory surveys of John McDowall Stuart and technologies such as his prismatic surveying compass. The unknown and hostile landscape claimed the lives of several men and scores of transport animals in the dogged pursuit of telegraphic connection to the rest of the world. Completed in August 1872, the Line connected Australia to the world via telegraph wires running 3,200 kilometres from Port Augusta in South Australia, to Darwin, then connecting via submarine cable to Java and beyond. The “earth [had been] girdled with a magic chain” according to the then Governor of New South Wales, Sir Hercules Robinson. How does it work? For use in surveying, the sight vane and prism are turned up on their hinge and the instrument is held horizontally either in the palm of one's hand or on a tripod. Two small discs of red and green glass attached to the prism can be flipped down over the sight line to reduce glare. The objective is to bring the subject into the sightline created by the prism, aligning with the thread of the sight-vane until the subject is bisected evenly. Once aligned, the division on the card may be read through the prism. This reading provides the magnetic azimuth, used for calculating the bearings of distant landmarks. Circular instrument mounted in a brass case with glass window and brass lid. The compass card face four black compass points printed on mint green paper; on the underside the magnetic needle would be affixed, all held in place by a brass knob at the centre. The arched labels of "Sawtell" and "Adelaide" and the Prince of Wales feathers appear to have been affixed with adhesive which has since yellowed in the areas of application on the compass card. The compass face is printed with numbers, every 10 degrees from 10 - 360, printed in reverse indicating this compass would have once held a mirror at the sighting bracket. On one side of the brass case is a brass hinged sighting-prism, possibly of ebonite. The sighting-prism is mounted in a hinged brass bracket on one edge of the brass case. It has two flip-type filter glasses (red and green) and folds down into a retracted travelling position. A hinged brass bracket on the opposite edge would have held the sighting bracket - carrying the sighting vane and mirror - which is now missing or removed. Under the hinge is a lever, possibly related to the movement of the bracket. Underneath the brass case is an indented circle with screw threads, possibly for attachment to a tripod, and indistinguishable marks scratched into the surface.Etched on to the centre of the lid, "Sawtell ADELAIDE / No 792." Affixed to the paper compass face, possibly from separate pieces of paper, "SAWTELL / ADELAIDE" with the Prince of Wales Feathers above "SAWTELL". Underneath on remains of white tape in red: "159."surveying, compass, charles todd, overland telegraph line, telegraph

The handmade basket has a variety of pieces of vintage sewing items as listed in the detailed Description. These would have been used in the home for repairs as well as pieces sewn. Mrs Pratt owned the sewing basket and it's contents - she lived in Beenak Road, Wandin, Victoria.An open rectangular shaped cane woven sewing basket with three bands of green and tan raffia woven around the sides. It had a lid which is missing but there is one twisted wire loop where the lid would have been attached. Inside are various pieces of vintage sewing items including; large and small cotton reels with cotton thread, very small cotton cardboard reels with thread, plastic container of pins, a handmade wooden darning mushroom, a brightly coloured tin of pins and needles, two short zips, a piece of embroidery material stamped with a pansy pattern to sew, a Birch brand packet of sewing needles, a Delyta brand "Nu-Bras" Brassiere Repair Set, two "Mendex" Cuff Savers for Men's Trousers, a Happy Home Needle Book with a few needles, and a paper pattern for Cross Stitch. See above for the brands and details of the sewing items included in the basket.containers, sewing, baskets, sewing equipment

Carved wooden heel extensions with inverted slide on one side and locating slide on other sideL and R stamped on each. Left extension 9 1/2(half) / 3 on inverted slide written in pencil. 16 written on locating slide in pencil Right extension 9 1/2(half) /3 on inverted slide written in pencil. 15 written on locating slide in pencil tied together with orange thread through brass rings

This shirt has an 'R' on each board indicating that the wearer had retired. Part of the Reverend Chaplain Major Thomas Bruce Williams, No556101, Collection.Khaki short sleeved polyester shirt with two button down breast pockets. A pair of boards are attached to the epaulettes, each with a major's insignia, a letter R and chaplains' department badge. On each collar is a gold coloured metal gross. A purple lanyard is threaded under the right epaulette, around the right sleeve and secures to the right breast pocket. The manufacturer's label is faded and partially detached.Printed in black on the inside of the collar: 'SIZE 41, 81'.uniform, army chaplain, major thomas b. williams, insignia

Facsimile booklets are a proof printing, as well as written correction fluid has also been used..1) & .2) Cover, clear plastic with threaded binding over the title page, red boarder on white background, black print on front with coloured photo of the Societies registration certificate on the front. In colour on the back “Welcome Back” poster with yellow border, 47 pages, white pages, illustrated in colour and B & W , complete history of the unit, members and events from inaugural certificate to 2014. .1) Handwritten in blue, black and red ink numerous corrections throughout.red cross, kennington sub branch, 100 years

Used by Australian Army circa 1960s.Used by Australian Army circa 1960sUnpainted US style aluminium canteen formed by two seam welded halves (front and back sides) with an aluminium threaded top for attaching a top to the water canteen. The water canteen has a black plastic screw top lid attached to the neck by a metal link chain. The front of the water canteen is bowed outwards with the back being flat with a curved top doorway shaped indentation.australian army, water canteen, aluminium

Gold coloured satin ribbon covering a slipper shape - one bigger, one smaller. The smaller slipper would once have been attached to the larger, but now loose threads remain but the two are separate. A gold coloured satin ribbon rosette is attached to the toe of the slipper.A 53 cm length of ribbon, folded to form a 15 cm loop, and then attached as a single ribbon to the slipper.costume accessories, clothes accessories, golden wedding charm

Document. Greeting Cards. Small white tri-fold card with uneven cut edges with gold edging resembling a ribbon threaded through the material. Around the edges are gold & white ivy leaves framing a blue coloured scene of an old water wheel and building. Another ivy vine from the top right cornewr to the bottom left corner. 'With kindest Wishes' written in gold at the bottom.person, greeting cards, malone collection, malone collection, greeting cards

Paper headed Geo. Pizzey & Son Ltd. Poms Fur Trimming. Dated August 7 Thursday 1947. Campbell's Linen Carpet Sewing thread. All printed at the top of page. Hand written is Sample taken from Walshes Machine 1/8'' brass wire from 6 buoy frame 12 buoys. From the check piece and the sample there was a loss of 35.58% of the weight.sciences, instruments - general, scalebuoy, bill ashman collection, geo pizzey & son ltd, poms fur trimming, campbell's linen carpet sewing thread, walshes

Clothing. Bed cap. Fine cotton lace crown edged by a 1.5 cm band of insertion lace, which is threaded with a mauve silk ribbon 1 cm wide. This in turn edged with a 6 cm deep frill of cotton lace, featuring flower and leaf design, and has a scalloped edge. The mauve silk ribbon insertion is finished with a bow, to adjust the size of the cap to fit the head.costume, female, lace bed cap

From the estate of Jenny Lang; 11 Pearcedale Grove, NunawadingA scoop neck sleeveless combinations with short legs. The white lawn is finished with torchon lace at armhole and at neck and legs, and with insertions. Front full length opening has 3 buttons and 2 flat darts either side of opening. Back opening 'pants' are buttoned with two buttons at either side. This opening also handstitched at side. Remains of threaded silk ribbon around neck and legs.costume, female underwear

Worn by donor to her sister's wedding 25 February 1966 at Christ Church Hawthorn.Cream Crepe bridesmaids dress Sleeveless which has a taffeta lining. the dress is a princess line style and has stiffened cream fabric flowers, with pearl centres. The flowers are mounted on continuous wire thread, Dress has a round neckline with a zip down the back. Gloves - Elbow length coloured cream with 2 pearl buttons at wrist closing. (Left glove has stain on back.)costume, female ceremonial

Jantzen is a brand of swimwear that was established in 1916 and first appeared in the city of Portland, Oregon, United States. The brand name later replaced the name of the parent company that manufactured the branded products. The brand featured a logo image of a young woman, dressed in a red one-piece swimsuit and bathing hat, assuming a diving posture with outstretched arms and an arched back. Known as the Jantzen "Diving Girl", the image in various forms became famous throughout the world during the early twentieth century. (Wikipedia). .Black men's woollen swimming trunks made by Jantzen. Inside label - "Jantzen" (red print), "Made in Australia" (faint green print). The trunks have a bone coloured cotton belt threaded through tabs at the waist. A silver coloured buckle has "Rustless" imprinted. Late 1940s. On the front at lower right is the Jantzen symbol of a costumed female swimmer in a diving position with arms outstretched.swimming trunks, jantzen, diving girl

The Arrow shirt company was founded by William H.Titus and his partner in Chicago, Illinois and in the late 1800s merged with Cluett Peabody. In 1929 Cluett, Peabody & Co. established a national menswear business under the Arrow brand name. The "Arrow" name gradually grew into a product line that included shirts, collars, handkerchiefs, cravats, pyjamas, and underwear for men and boys. (Wikipedia)Two pairs of men's underwear. "Arrow" Trademark. Made from "Sanforized Shrunk fabric - ironless finished cotton". Cotton tape threaded through the top band allow for some adjustments to sizing. One garment appears to have hand stitching on the top band to allow for resizing or repair. Each pair has three silver coloured press studs for front fastening. 1930s - 1940s.arrow clothing, underwear

A Spalding 'Kro-Flite' model tennis racquet, featuring whipping around shoulders. Has a leather wrapped hand grip and embroidered butt cloth . Manufacter name features across base of head. Model name and 'flying bird with sun' symbol features across throat. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, String, Paint, Adhesive tape, Cloth, Threadtennis

Short sleeve khaki coloured shirt with two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a light brown coloured plastic button. Six buttons fasten the shirt down the centre front, down to an unfinished, overlocked hem. Patch on left and right shoulders depicts three downward pointing chevrons in brown and white embroidery thread.dress uniform, australian defence force, shirt

This item was worn by Maj Damien Batty whilst on UN peacekeeping in BougainvillePolyester cotton brassard in Disruptive Pattern Camouflage Pattern (DPCU Rabbit pattern) Fabric. Sewn on the main body of the brassard are two patches, the first patch represents the United Nations featuring the United Nations symbol, the second is a square patch of the Australian flag. The brassard is secured to the sleeve by a slit in the top through which the shoulder strap is threaded and a velcro straps wraps around the arm. United Nations Patch - UNITED NATIONS / NATIONS UNITES Australian Flag - AUSTRALIAbrassard, united nations, australian flag, dpcu

In 1920 the City of Chelsea was formally proclaimed to be a city, rather than a township. This booklet, produced in 1970 was to commemorate it being 50 years since Chelsea was proclaimed a city.Five (5) page booklet with white cardboard covering with black text at top and bottom and a blue and red coat of arms for the City of Chelsea in the centre. The book was, at one time, registered with the Kingston Library Service and has a barcode and green sticky dot adhered to the front. There are two holes punched into the left hand side of the booklet with a royal blue ribbon threaded through and connected with a bow.chelsea, proclamation, city

The steam engine indicator, or dynamometer, is an instrument used on a steam engine (such as that of a vessel or train) to measure and record the change in the pressures of the engine’s cylinders during their operating cycle. The engineer would use it to identify problems or defects such as bad valve settings or constricted steam pipes. It could indicate the difference in efficiency caused by adjustments made to the engine, being able to instantly measure the variation of pressure from the engine stroke at any given time. This force of power would be registered by a pencil, fitted to the adjustable arm, which would trace a line on paper wound around the cylinder. The recorded information could be used in conjunction with mathematical tables. This particular instrument was made by T.S. Mc Innes, one of the better manufacturers of engine indicators. Mc Innes engine indicators were still being used in the mid 1900’s. This specific instrument was used by Mark Forsythe of North Berwial, Scotland and late of Ararat, Victoria when he was chief engineer on the “SS Talawena” in 1892. The Port of Warrnambool, in Victoria, harboured steam ships that carried both passengers and cargo along the south west coast in the late 1800’s and into the 1900’s. The engineer of a steam ship was responsible for reaching and maintaining the optimum level of steam energy to serve the locomotion and efficiency of the steam ship. The engineer would use a steam engine indicator to measure and record information to achieve this purpose. Engine Dynamometer or Steam Engine Indicator in square, fitted oak case. This brass instrument is used to measure and record steam pressure for setting up and adjusting valves on a steam engine. It has an oscillating recording drum with vertical, silver clip attached for holding paper in place around the drum. The drum oscillates left to right. There is a pulley attached to a length of cord, which is attached to the drum. Beside the drum is a fine metal arm, vertically adjustable, small hole in the end to hold a pencil. Inscription stamped into bracket of the arm. The engine indicator is mounted on a hinged side of the case that swings out ready for use. Attached chains prevent the side from opening past vertical. There is storage for other accessories and an empty compartment in the base (where a scale or ruler may have been located). The case has a collapsible wooden handle, brass hinges and two brass, hook-shaped catches. There is a code stamped inside the lid. It contains a brass, ‘T’ shaped steam-cock (or stop cock) with two open ends made of metal pipe with different sized threads. (Turning the handle on top opens and closes the space in the pipe and would close off the flow of steam from one end to the other.) Also inside the case are three different spiral springs, each with a threaded nut on the end that has a threaded hole inside it. Used by Mr Mark Forsythe when chief engineer on the SS Talawena in 1892 “T.S. MC INNES PATENT” and “522 _ _” (last 2 digits are unreadable) pressed into the arm of the brass indicator. “[ ] X ’ stamped inside the lid of the case. The 3 springs all have a number stamped into them: (1) “32” and “12” (2) “12” and “16” [above] “12” (3) “64” and “150” Card that came with instrument “This instrument was used by Mark Forsythe of North Berwial Scotland and late of Ararat, Victoria when chief engineer on the SS Talawena in 1892" dynamometer, steam engine indicator, t.s. mcinnes, glasgow, dobbie mcinnes, port of warrnambool, warrnambool, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, shipwreck coast, great ocean road

This bookmark was found in a book called 'The English Lakes' owned by Elizabeth Chatham-Holmes. The bookmark is a Stevenograph. In 1854 Thomas Stevens began with weaving plain and fancy ribbons, but was soon experimenting with a development of jacquard weaving to produce pictures. For this, the picture was plotted on squared paper, in the fashion of a cross-stitch embroidery design, and a large card then perforated to represent each colour appearing in every "line" of the picture. The cards, arranged in an endless chain and attached to the loom, controlled the manipulation of the warp threads. Each time the shuttle crossed the loom a different card came into use, changing the arrangement of the warp threads and, consequently, the pattern woven..When the industry collapsed in 1860, Stevens determined to make use of his experiments by producing pictures in such variety as to appeal to all tastes. The earliest productions seem to have been bookmarkers... The pictures included portraits of celebrities and local scenes, scriptural texts, hymns and psalms, and verses from the poets. Stevens also introduced to the Admiralty a hat ribbon with the name of the ship woven in gold wire. This he patented; it was adopted and for many years the firm was the sole supplier to the Admiralty Contracts Department. https://stevengraphs.com/thomstevandh.html Also found in the book was a small card with dried flowers glued with the words 'Flowers from the Holy Land' and a WW2 photograph of the bust of a man in uniform with a cap..1) Red hard covered book called 'The English Lakes' by W.T. Palmer. .2) Woven silk bookmark with white (now cream) and yellow background and red, purple, green and yellow detail and the start of Psalm 23 woven into the bookmark. Possibly made in the late nineteenth century. .3) Small card with dried flowers glued with the words Flowers from the Holy Land .4) WW2 photograph of the bust of a man in uniform with a cap. .1) Inside front cover "E.S. Holmes Ascot" .2) Woven into the bookmark - The Lord is my Shepard I shall not want, & T. Stevens, Coventry .3) Printed on the front - Flowers from the Holy Land, Placed on the Holy Sepulchreholmes, ec holmes, ascot, religious, religion, bookmark, english lakes, w.t. palmer, chatham-holmes collection, flowers from the the holy land, stevengraph

A clamp is a fastening device to hold or secure objects tightly together to prevent movement or separation through the application of inward pressure. The tool is for temporary use for positioning components during construction and wood working. There are many types of clamps available for many different purposes. Some are temporary, as used to position components while fixing them together, others are intended to be permanent. A C-clamp or G-clamp is a type of clamp device typically used to hold a wood or metal work piece, and often used in carpentry and welding. C-clamps or G-clamps are typically made of steel or cast iron, though smaller clamps may be made of pot metal. At the top of the "C" is usually a small flat edge. At the bottom is a threaded hole through which a large threaded screw protrudes. One end of this screw contains a flat edge of similar size to the one at the top of the frame, and the other end usually a small metal bar, perpendicular to the screw itself, which is used to gain leverage when tightening the clamp. When the clamp is completely closed, the flat end of the screw is in contact with the flat end on the frame. When the clamp is actually used, it is very rare that this occurs. Generally some other object or objects will be contained between the top and bottom flat edges. A steel ‘C’ or ‘G’ Clamp used to hold a wood or metal work piece, used in carpentry and welding.L.W.BANKtools, woodwork, metalwork, welding, carpentry, pioneers, market gardeners, early settlers, bank w.l., moorabbin, cheltenham, bentleigh, ormond

Detachable collars enclosed in a leather box such as this one were used in the 19th and early 20th centuries, particularly by men in the business and clerical professions. The collars were attached by studs or buttons to a shirt. The collars were removed prior to shirt washing the shirt. The leather box was most useful for travelling. Detachable collars could still be used today particularly by clergymen. Two are named E R Twomey.This box and collars are retained as an example of vintage men's wear. It will be useful for display.A brown leather cylindrical case with a strap and buckle. It has white thread stitching around the rim and upper edge of the lid, the slot for the buckle, the rim and lower edge of the base . Inside are four detachable white winged collars for wearing with a shirt. Each has three holes, one for a button and two for a stud or for buttons at the front, two wings and a curved slot at the back.They are made of very fine cotton and linen.002215.1 J.T. MADE IN ENGLAND ESPECIALLY FOR Buckley & Nunn Ltd. MELBOURNE 002215.2 A stamped lion, WELCH MARCETSON 7 CO. LTD. 4 THE ALATUS TRADE MARK DES M 9 M 520 1 3/4 x 1/2 T14 002215.3 MADE IN ENGLAND FOR BUCKLEY & NUNN MELBOURNE EXTRA QUALITY , A deer head with antlers in a pointed elipse E.R. THOMEY a red inverted drawn triangle two dots Lindum 2x 151/2 002215.4 MADE IN ENGLAND FOR BUCKLEY & NUNN MELBOURNE EXTRA QUALITY, A Deer head with antlers in a pointed elipse . T indecipherable . E.R.T.4 indecipherable. Lindum 2x15 002215.5 E.R. THOMEY Indecipherable Lindum 2x 15 ? warrnambool, detachable vintage collars, detachable men's shirt collars

In 2005 the H.M.A.S. Warrnambool was de-commissioned in Darwin and the Mayor of Warrnambool, Cr Glenys Phillpot, was present at the ceremonies connected to this event. She obtained this sailor’s hat at that time as a souvenir of the ship. It appears to be brand new. H.M.A.S. Warrnambool was the second ship with this name. The first H.M.A.S. Warrnambool was built in Sydney in 1941 and commissioned for anti-submarine and mine sweeping duties. In 1947 it was struck by a mine in northern Australian waters and sunk with the loss of four lives. The second H.M.A.S. Warrnambool was commissioned in 1981as a patrol boat in northern Australian waters. It had steamed over 500,000 miles before the end of its working life in 2005 and had visited Warrnambool several times. This sailor’s cap is of importance as a memento of the second ship named H.M.A.S. Warrnambool and particularly commemorates the de-commissioning of that ship in 2005 in Darwin. This is a white seaman’s hat with a flat oval-shaped crown made of stiffened white material with two white metal eyelets on each side. The base has a black ribbon with a black bow and lettering in woven gold thread. Inside there is a leather band with a white bow and a navy blue ribbon to act as a chin strap. This is attached on one side only. Inside also is a white label with the maker’s information on it. H.M.A.S. Warrnambool MAPE uniform headwear of the MCH group of companies 3405-66-075-6064 E 5 R.A.N.