Showing 171 items
matching drawers
-
Geoffrey Kaye Museum of Anaesthetic History
Photograph
Black and white photograph of an anaesthetic machine, likely to be a portable Foregger anaesthesia apparatus. Flowmeters with glass cylinders including Oxygen and Nitrous Oxide sit on a metal benchtop of a trolley with two drawers. A glass vaporiser is attached undernath the metal benchtop and there are metal valves attached on either side of the benchtop.anaesthetic apparatus, anaesthetic machine, foregger anaesthesia apparatus, flowmeter -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, 19 06 1969
Sister Gibbs is liaising with Dr. Gibbs to discuss his patients who are attended by RDNS.Liaison had occurred between doctors and the Trained nurses of the Melbourne District Nursing Society (MDNS), from its inception in 1885. This increased when Midwifery was introduced in August 1893 with close liaising with the Women’s Hospital. As District nursing grew it was recognized that closer liaising between many Public Hospitals would be beneficial, for not only the MDNS, later called Royal District Nursing Service (RDNS), Sisters, but also for the patients and the hospitals. In August 1964 a Liaison Officer commenced at the Alfred Hospital. This soon increased to Liaison Officers working full time at several Public Hospitals. At the time of a patient’s discharge, the Liaison Sister forwarded information on their diagnosis and instructions regarding the care required at home to the appropriate RDNS Centre, and in turn the attending District Sister wrote a report of progress and any queries to the hospital doctor, via the Liaison sister, at the time the patient was attending outpatients. Any new instructions were then sent back to the District sister. Liaising also occurred between District field staff and Doctors when patients were referred by General Practitioners and did not attend a hospital.On the left of this black and white photograph is Sister Melanie Gibbs of the Royal District Nursing Service (RDNS). To her right is Dr. L.B. Witts who is wearing glasses; has short dark hair and is wearing a grey suit, white shirt and dark tie; he has a stethoscope around his neck with the end on his lap. He is sitting 'side on' at the end of a low cabinet with three drawers seen.and is turned toward Sister Gibbs. His right arm and hand are resting on an open book on the top of the cabinet. Sr. Gibbs, who has dark curled hair, is wearing her grey RDNS uniform coat with the RDNS insignia on the upper sleeve, and peaked hat. She is seated 'side on' in the photograph facing Dr. Witts. Her dark leather rectangular shaped case, with RDNS written in the top third, is resting on Dr. Witts' low cabinet. On the left in the background sit a set of four light grey metal drawers above a set of dark drawers and part of an open Venetian blind over a window is to the right.Photographer's Stamp. Quote No. HN 47melbourne district nursing society, mdns, royal district nursing service, rdns, patient care, rdns liaison, sister melanie gibbs, dr l.b. witts -
Clunes Museum
RATION BOOK
RATION TICKETS FOR PETROL ISSUED DURING 1939-1945 WAR. COMMONWEALTH GOVERNMENT ISSUED THESE DURING THE WAR WHEN PEROL WA SCARCE FOR PRIVAT CITIZENS1. COLLECTION OF FOUR MOTOR RATION TICKETS GLUED ONTO CARDBOARD 2. McDOUGAL & CHISHOLM, CASH DRAWERS, BRIDGE STREET BALLARAT OFFERED THESE TICKETS TO CUSTOMERS TO COLLECT TO GAIN DISCOUNT, THREE HUNDRED TICKETS WOULD REDEEM GOODS TO THE VALUE OF SEVEN& SIX PENCE FREE OF CHANGE[75CENTS]local history, document, ticket, ww2 memorabilia -
Bendigo Historical Society Inc.
Costume - Cotton drawers
White cotton drawers with fine crochet and needlework lace on the legs. Lace edging 15 cms wide. The waistband fastens at the back with two buttons. A gathered section is detachable and fastens to the waistband with two buttons. This section has a machined center seam. At the front two darts are placed on either side of the central seam.cotton drawers, bloomers, early underwear, vintage underwear -
Churchill Island Heritage Farm
Textile - Lace Piece
This piece is a beautifully preserved machine made copy of Valenciennes style lace as can be seen from the diamond shaped ground. This would have been made on the Barmen machine which was developed in the 1890s in Germany from a braiding machine. Its bobbins imitate the movements of the bobbins of the hand-made lace maker and it makes perfect copies of the simpler hand-made laces. It can only make one width at a time and does not have the pattern potential of the Leavers machine. Valenciennes was a lace making town on the French- Flemish border which in 1780 had 4000 lace makers but due to the revolution of 1789 the number was reduced to 250. It was initially Flemish but was claimed by the French, however the centre for Valenciennes lace eventually diverted back to Ghent and Ypres in Belgium. Due to its lightness and neatness Valenciennes lace, although very expensive was simpler to produce than Mechlin lace, and was never used for expensive garments. Instead it was applied to bed linen, lingerie, and the fichu (a woman's scarf wrapped over the shoulders and fastened in front).This lace was favoured by Queen Victoria, the Empress Eugenie and others as a trim on undergarments. The basic undergarments were stays, shift (smock, chemise or shirt), petticoat and drawers although drawers were not in general use until the mid-19th century when the tendency of the fashionable crinoline to become airborne or to tilt itself at embarrassing angles made a covering garment for the nether regions essential. Drawers were just two cylinders for the legs, joined at the waist with the lower ends frilled or trimmed with lace.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries. Machine made Valenciennes lace with diamond groundjanet amess lace collection, lace, churchill island, machine -
Churchill Island Heritage Farm
Textile - Lace Piece
This piece is amachine made copy of Valenciennes bobbin lace with many-legged spiders and a simple oval and circle pattern. Again it is worth noting that hand-made Valenciennes lace was very costly and time consuming (e.g., a pair of ruffles valued at £160 would take the lace maker ten months of fifteen hour days to complete) therefore the advent of machine made copies was welcomed although the Barmen made lace was more expensive that that made on the Leavers machine. Valenciennes was a lace making town on the French- Flemish border which in 1780 had 4000 lace makers but due to the revolution of 1789 the number was reduced to 250. It was initially Flemish but was claimed by the French, however the centre for Valenciennes lace eventually diverted back to Ghent and Ypres in Belgium. Due to its lightness and neatness Valenciennes lace, although very expensive was simpler to produce than Mechlin lace, and was never used for expensive garments. Instead it was applied to bed linen, lingerie, and the fichu (a woman's scarf wrapped over the shoulders and fastened in front).This lace was favoured by Queen Victoria, the Empress Eugenie and others as a trim on undergarments. The basic undergarments were stays, shift (smock, chemise or shirt), petticoat and drawers although drawers were not in general use until the mid-19th century when the tendency of the fashionable crinoline to become airborne or to tilt itself at embarrassing angles made a covering garment for the nether regions essential. Drawers were just two cylinders for the legs, joined at the waist with the lower ends frilled or trimmed with lace.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries. Machine made Valenciennes lacejanet amess lace collection, lace, churchill island, amess, machine -
Kew Historical Society Inc
Archive (Sub-series) - Subject File, Kew Historical Society, HODDLE Survey, 1997
Various partiesReference, Research, InformationSecondary Values (KHS Imposed Order)Photocopied correspondence and maps (surveys) relating to surveys ordered by Robert Hoddle, Government Surveyor. Authors of letters and information include Gwen McWilliam and Jack Hackett. Much of the correspondence relates to the site of the ‘Hoddle Tree’, currently located in the Kew Golf Course. Jack Hackett’s original map is contained in the map drawers in the Society’s archive.kew historical society - archives, kew (vic) - history, robert hoddle - surveyor, hoddle tree - kew (vic), jack hackettkew historical society - archives, kew (vic) - history, robert hoddle - surveyor, hoddle tree - kew (vic), jack hackett -
Whitehorse Historical Society Inc.
Domestic object - Writing Case, c1880
Walnut and brass fitted writing case bound with brass. Brass plate on lid. Brass handles - one attached to drawer. Inside it opens to a sloping writing desk - black leather with 22 carat gold decoration. Hidden drawer compartment. Three drawers with compartments for paper, pens, ink bottle. Two keys on a ribbon.Ernest John Walters, Nov 4, 1883domestic items, writing equipment -
Tatura Irrigation & Wartime Camps Museum
Box - Sewing, 1940's
Handmade by internees at WW2 Camp 3, TaturaHandmade varnished wooden sewing box with concertina-like opening sections/drawers. Two at the top having doors and cut out handles. One top drawer is divided into 2 sections and has a picture of a Kookaburra on its door, the other has 4 sections and a picture of a koala and baby on the door. Corners of sections are dovetailed and doors hingedsewing box, wood, liebeskind, wagner, camp 3, tatura, ww2 camp 3, domestic, sewing -
Mission to Seafarers Victoria
Furniture - Volum Medicine chest
This chest is the typical mid-18th century model. Thought to have belonged to captain James Volum.A medicine chest was a necessity for all sea journeys. Sometimes surgeons were onboard ships if there were passengers but on merchant ships, the captain had to be able able to look after his crew. A medium size mahogany cabinet with four protruding feet, small free hinged handles on left and right sides which are positioned approximately 5/8ths up from the bottom of the item, these handles can hinge 100 degrees upwards. The front and back 6/8ths of the cabinet can hinge open, as can the top of. Both front and back doors can be locked closed with their own respective hook latch which is on both sides of the cabinet. The top lid can be locked by interacting with a metallic keyhole which is present on the front of the cabinet close to the top. Revealed by opening the top lit is storage location with two rows of three storage spaces and one row of four. Revealed by opening the front door, is a single shelf with six divided locations for an equal number of glass containers, though only five remain in complete form. Below this self are three rows of drawers of differing dimensions, each with a small white knob. There are two drawers of equal width in the first row. Each drawer has four equally divided sliding pieces on its top face. When removed, these lids reveal a respective small space. Present on small paper labels on each of these lids are identifiers of the material which was stored. There are three equally sized drawers in the second row, which are less wide than the previous row. Only two of the drawers in this row have lids, of which each only have a single lid which covers a single compartment, each of these have a single label on them. The middle drawer contains a small glass mortar and pestle which are restrained by small wooden fixtures within the drawer. There are two drawers of equal width and greater height than any of the previous drawers in the third row. The first drawer has a single compartment containing multiple vials of varying dimensions, some of which feature a paper label with a respective inscription. Some of these vials are broken. In the second drawer has no lid which covers its four equally sized glasses. These are restricted by a wooded piece with four circular cut-outs. Revealed by opening the back door are two equally sized and spaced shelves which both have four divided locations which are filled by eight respective glass containers. These glass containers are of similar design to those in the front compartment but are larger. Some of these glass jars have paper labels like those found on previous glass containers.Label on top lid:volum collection, medecine chest, portable furniture, geelong, peterhead, scotland, captain, seafaring, whaling, london, bishopsgate, old gravel lane, london docks, tobacco dock, james burrows -
Churchill Island Heritage Farm
Textile - Lace Trim, Section
This piece has been labelled by the Lacemakers Guild as ‘Imitation Valenciennes’which leads one to assume that it is machine made and created to look like a handmade Valenciennes trim Valenciennes was a lace making town on the French- Flemish border and in 1780 had 4000 lace makers but due to the revolution of 1789 the number was reduced to 250. It was initially Flemish but was claimed by the French however the centre for Valenciennes lace eventually diverted back to Ghent and Ypres in Belgium. Valenciennes lace was simpler to produce than Mechlin lace, and was never used for expensive garments. Instead it was applied to bed linen, lingerie, and the fichu (a woman's scarf wrapped over the shoulders and fastened in front). It was favoured by Queen Victoria, the Empress Eugenie and others as a trim on undergarments. The basic undergarments were stays, shift (smock, chemise or shirt), petticoat and drawers although drawers were not in general use until the mid-19th century when the tendency of the crinoline to become airborne or to tilt itself at embarrassing angles made a covering garment for the nether regions essential. Drawers were just two cylinders for the legs, joined at the waist with the lower ends frilled or trimmed with lace. Due to its lightness and neatness Valenciennes was favoured although very expensive. Centres in both France and Belgium were soon producing a neat copy and this section is one of the wide variety of machine imitations which were made, some so exact as to be almost undetectable. The best was the Barmen form which used linen thread. Only one width could be made at a time so it was much more expensive than that made on the large Leavers machineChurchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries. Imitation Valenciennes length of white lace trim.janet amess lace collection, lace, churchill island, amess, machine -
Parks Victoria - Cape Nelson Lightstation
Furniture - Cabinet
The tall, two‐door cupboard with curved shelves is without a back and is taller than the bench cupboard on the lower lantern room of the lighthouse . The curved shelving suggests that this practical storage cupboard was custom‐built or adapted to serve in this location on the landing level below the lantern room. It is not known when it was provided to the lightstation. It shares the structural features of this furnishing as well as other nineteenth century utilitarian cabinets that were made for Victoria’s lightstations, such as those fitted beside fireplaces in the keepers’ quarters (for example CNLS 0016) or serving as lantern room cupboards. They have doors simply framed and bevelled around central panels. This particular cupboard, which is painted grey with four white panels, is unusual both for its height and the four doors, with the twin top panels taller than those underneath. This panel arrangement repeats the design of the lightstation’s door cases. Further research may reveal more about its manufacture. It is not known whether it is attached to the wall or movable; if attached it is considered to be a fixture and included in the Victorian Heritage Register listing for the lightstation (VHR H1773). Other similar cabinets which have been constructed to fit the curved wall of a lighthouse survive at Cape Schanck, varnished wood benchtop, 2‐door cabinet with brass door knob, no drawers); Point Hicks, benchtop, 2‐door, painted green with silver doors, no drawers) and Gabo Island bench top, 2‐door, no drawers, green paint removed to reveal cedar timber), and Cape Nelson, benchtop, 2‐door, 2‐drawer, partially varnished). Cape Nelson’s tall cupboard with curved shelves and back profile is unusual among the lighthouse furnishings. The cabinet is a unique, original feature of the lighthouse and has first level contributory significance for its historic values and provenance.The tall, two‐door cupboard with curved shelves is without a back and has curved shelving. Painted grey with four white panels, on the four doors, with the twin top panels taller than those underneath. -
Federation University Historical Collection
Equipment - Scientific Object, Reichert Stage Microscope with accessories`
Originally used in metallurgy. It was probably acquired c1900. Initially it was equipped with carbon arc light source. Later, in the mid-sixties electric filament light was installed by Lindsay Pattenden, lecturer in Metallurgy.A microscope designed for examining prepared surfaces of opaque objects, e.g. polished metal alloy specimens placed on top of the viewing stage. Equipped with a light source and with two viewing posts, one which is designed for a camera. The accessory box (.2) is a polished timber box with drawers which hold lenses and other accessories. Instructions are filed with the catalogue worksheet.reichert, microscope, lindsay pattenden, carbon arc, metallurgy -
J. Ward Museum Complex
Tool - Measuring Scales
The traditional scale consists of two plates or bowls suspended at equal distances from a fulcrum. One plate holds an object of unknown mass (or weight), while known masses are added to the other plate until static equilibrium is achieved and the plates level off, which happens when the masses on the two plates are equal. Medication given to patients at both Aradale Mental Hospital and J Ward had their does measured using these weights and scales - and some evidence of residue remains.The scales are in excellent condition and a good example of medical equipment used in Aradale Mental Hospital and J Ward. Measuring scales for medications Timber construction with glass lid Small crack along the left hand side of scales Two drawers contain four weights in ounces Case painted in black lacquer Metal hinges and three brass knobs (one missing from right lower drawer) Small piece of folded butcher paper in left hand drawer No manufacturer markings or serial numberspsychiatric history, mental health, aradale mental hospital, j ward -
Flagstaff Hill Maritime Museum and Village
Plan - Ship Plan, Orient Steam Navigation Company, Orient Line, RMS Orion, ca. 1934
The Orient Steam Navigation Company Limited launched the Ocean Liner RMS Orion in 1934 and it remained in operation until 1963. The twin screw steamship was built to carry first class and tourist class passengers, over 1100 in all, plus almost 500 crew from Europe to Australia in comfort. The ship had a single funnel and a single mast. During WWII the vessel served as a troop carrier. The ventilation system noted on the plan, Punkah Louvre System, was designed for heating fresh air ventilation in buildings, ships and railroads. The system originated from Thermotank in Glasgow, Scotland. The ship plan for the RMS Orion is significant for its connection with the vessel. The ship was a leader, with several 'firsts'; the first Orient Line ship to be built with a single funnel since 1902, and the first to be painted in the Orient Line's livery, with a corn-coloured hull. It was the first liner to use chromium and bakelite materials for the surfaces throughout the ship, which provided greater resistance to the sea. It was also the first British ship to be fitted with air conditioning.Plan: printed provisional line drawing of the Orient line vessel "R.M.S. Orion". Inscriptions are printed on the plan. There are diagrams of six decks included in the plan. The ship is built for tourist "B" accommodation. The plan's Notices include details of the cabins including wardrobes, drawers, hinged seats, mattresses and bunk numbers. It also notes that there is a Punkah-Louvre System of Ventilation.Printed on the plan: "PROVISIONAL PLAN" "LOWER PROMENADE DECK" "UPPER CABIN DECK" "MAIN CABIN DECK" "LOWER CABIN DECK" "SUN DECK" "PROMENADE DECK" "ORIENT LINE / R.M.S. "ORION" / 24,000 TONS / TOURIST "B" CLASS ACCOMMODATION" "Owners: Orient Steam Navigation Company Limited"' "Managers : ANDERSON, GREEN & CO. LTD" "7 BISHOPS GATE, LONDON, E.C.2" "Chief Passenger Office : 14 Cockspur Street, London, S.W.1" "Branch Passenger Office : 1 Australia House, Strand, W.C.2" "notices"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, rms orion, plan, ship plan, provisional plan, orient line, orient ship, vissel orion, class b passenger accommodation, punkah louvre system of ventilation, deck plan, ship ventilation, ship floor plan, orient steam navigation company limited, anderson green & co ltd, steamship, ocean liner, war ship, troop carrier -
Bendigo Art Gallery
Furniture, UNKNOWN, George III Mahogany bow-fronted sideboard
decorative arts, furniture, woodwork, carved, drawers, inlay, interior, sideboard, mahogany -
Kew Historical Society Inc
Archive (Sub-series) - Subject File, Kew Historical Society, Gallipoli & Beyond 2015, 2014
Boroondara Historical Societies AssociationReference, Research, InformationProvenance orderGallipoli & Beyond was a Commonwealth funded project involving members of the Boroondara Historical Societies Association. The project involved roadshow, exhibitions, talks, and the publication of a history. The file contains newspaper and magazine, articles/clippings, promotional materials, certificates, etc. The Kew Historical Society participated in a number of events and held an exhibition on the embarkation photographs of Josiah Earl Barnes. The captions and the posters are held separately in the map drawers.photographers - kew (vic) - josiah earl barnes, first world war, boroondara historical societies association (bhsa), gallipoli & beyond - special projects, wwiphotographers - kew (vic) - josiah earl barnes, first world war, boroondara historical societies association (bhsa), gallipoli & beyond - special projects, wwi -
Churchill Island Heritage Farm
Textile - Lace Trim
This is quite a fine and dainty trim which appears to have been made with a fine linen thread or cotton combined with another fibre, possibly silk or rayon. It has been made by machine in the Valenciennes style as one can see from the diamond shaped ground. Handmade Valenciennes bobbin lace was very costly and time consuming to produce. One pair of ruffles costing £160 would take a lace maker ten months of fifteen hour days to create. Valenciennes was a lace making town on the French- Flemish border and in 1780 had 4000 lace makers but due to the revolution of 1789 the number was reduced to 250. It was initially Flemish but was claimed by the French however the centre for Valenciennes lace eventually diverted back to Ghent and Ypres in Belgium. Valenciennes lace was simpler to produce than Mechlin lace, and was never used for expensive garments. Instead it was applied to bed linen, lingerie, and the fichu (a woman's scarf wrapped over the shoulders and fastened in front).This lace was favoured by Queen Victoria, the Empress Eugenie and others as a trim on undergarments. The basic undergarments were stays, shift (smock, chemise or shirt), petticoat and drawers although drawers were not in general use until the mid-19th century when the tendency of the crinoline to become airborne or to tilt itself at embarrassing angles made a covering garment for the nether regions essential. Drawers were just two cylinders for the legs, joined at the waist with the lower ends frilled or trimmed with lace. Due to its lightness and neatness Valenciennes was favoured although very expensive. Centres in both France and Belgium were soon producing a neat copy. This specimen is one of the wide variety of machine imitations which were made, some so exact as to be almost undetectable. The best was the Barmen form which used linen thread. Only one width could be made at a time so it was much more expensive than that made on the large Leavers machine. Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries. Length of lace trim of Valenciennes lace with diamond shape ground.janet amess lace collection, lace, churchill island, trim, machine -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Document - Receipt, c1900
Mrs Martha Closter ( Kloster), of Oakleigh purchased the Melber Sewing Machine in 1909 and gave it to her daughter Mary when she and Alonzo Box married in 1918 and settled in Moorabbin Shire. This document was donated by a descendant of the Box family in 1985.William and Elizabeth Box purchased 'Box Cottage' in 1865 from a pioneer settler who had bought part of the land noted in Dendy's Special Survey 1841 Brighton. They raised their family there and established a market garden to supply produce to the population of Melbourne. Their nephew Alonzo married Mary Kloster/ Closter in 1918 and she brought with her the 'Melber' sewing machine that she used to provide clothing for the familyThe original paper Receipt of the Melber Company Sewing Machine, 154 Chapel Street Prahran on July 15th 1909. Mrs Closter purchased a ‘Melber Rotary Hook Sewing Machine , 4 drawers and attachment. No. 17469 costing 9 pounds, less due 7 shillings and 6 pence leaving the sum of 8 pounds 12 shillings and 6 pence Paid by Cash to Powell & Candy per ……… on 15/7/09 ( hand written ) MELBER SEWING MACHINES / 154 CHAPEL STREET, / Prahran / Mrs Closter July 15th 1909 ( handwritten) / Dr. to POWELL & CANDY, / IMPORTERS / New and Secondhand Machines for Cash and Easy Terms. / Repairs promptly executed Locks repaired. Keys fitted. Needles and Parts for all Machines. A stamp 25mm x 30mm is on left corner of document ‘ VICTORIA STAMP DUTY ‘ -at top and base - ‘1d ‘ - centrally victoria, melbourne, clothing, brighton, moorabbin, pioneers, sewing, box elizabeth, box alonzo, closter mary, kentucky, early settlers, america, craftwork, sewing machines, melber company, u s a, prahran, kloster martha -
Flagstaff Hill Maritime Museum and Village
Domestic object - Sewing Machine, Early 20th century
Ward Brothers (George and Samuel) registered a company (Australian Sewing Machines Limited Pty Ltd) with the head office address in Errol St, North Melbourne, and Prahan. The earliest newspaper advertisement for this company was in 1897. Around this time the Ward Brothers first imported sewing machines from England and Wertheim placed their decal on them and mounted them in their own Australian made cabinets. David Ward later imported machines from Beisolt & Locke in Germany and registered name A.N.A. (All Native Australian), his shop was in Collingwood Melbourne. Some of these machines had Ward Brothers decals on them as well. The three brothers sold under the same name as Ward Brothers. The early Ward Brothers logo had a map of Australia with a picture of all three brothers on it. In 1911 all three of the Ward Brothers decided to share a stall in the yearly Melbourne exhibition. The A.N.A was the machine that got rave reviews. It was at this time that the Australian Sewing Machine Company Pty Ltd decided to add the A.N.A logo to their logo to cash in on the new found celebrity status that the A.N.A has gained. To cut a long story short. David Ward took his brothers to court to prevent this from happening. This was a long drawn out affair that took quite a few years. The settlement was decided out of court and nothing was disclosed of the deal that was made. David seemed to have left the scene, then the remaining Ward Brothers and A.N.A. combined and then became “Wardana”. There are many Ward Brothers sewing machines in displays, they originated from Japan, England, America, and Germany. It seems that where ever they got the best deal for sewing machines or parts is the direction they went. This is where the Bendigo sewing machine company came into the picture. All imported sewing machines into Australia drew a government tax. Bendigo Cording's Traction Company was given proposed two-pound tariff protection that gave the company a significant price advantage for its machines. As a result, the Ward Brothers purchased a huge number of Bendigo shares to get cheaper machines for their sewing machine cabinets. Ward Brothers then placed one of their company officials on the Board of “Bendigo Sewing Machines Limited” and the rest is history. Ward Brothers had shops Australian wide and in most of the major country towns. History for “Bendigo Sewing Machines Limited” Cordings Traction Company owners (H. Keck MLC, W. Wallace, and W. Ewing) operated their business out of the former W. Webb & Co. building in Queen St. Bendigo. Around 1923-1924 they decided to switch from traction engines to manufacturing sewing machines. The actual date is not known but that year's financial report made note of both Cordings and Bendigo Sewing Machines Limited. The switch was made with the government of the day agreeing to a tariff of two pounds per head for every machine head made completely in Australia. The change from traction engines to sewing machines went well. Government representatives visited the factory in Bendigo to inspect and ensure that the sewing machines were Australian made as a result they agreed on granting the two-pound tariff to the company. After the first 12 months, they built 30, the following 12 months the company had produced 1500 machines probably due to the involvement of the Ward brothers. However, the government proposed a new condition to the tariff agreement which was that the company must produce 20% of Australia's requirements for sewing machines. In 1924 after having had produced 1500 machines resulting in reaching their financial limit for tariff support. According to the government, the requirement was 15,000 machines for the next year had to be produced to qualify for the tariff. The company had already reached its production limit and unfortunately folded. There were several attempts to regain government assistance to save this new industry but it was to no avail. Even a promise to open another factory in Sydney was offered but unfortunately wasn't accepted. An item fabricated in Australia from a majority of imported parts from either Germany, America or England giving a snapshot into the early manufacturing industries that were operating at the time of Federation. Sewing machine, treadle, in timber cabinet. Branded Ward Bros, A.N.A., Australian Sewing Machine Coy. Decorative carved timber cabinet, hinged, fold-out laminated timber top and five drawers; two small on each side with handles and one long, shallow, between side drawers without handle. Thread is on bobbin in a rocket shuttle (both in good condition) plus spare empty shuttle (rusty). Brass ‘Half Yard’ ruler inlaid across front, measuring scale in inches and centimetres. Two metal shuttle cover plates (or throat plate / slide plate); front one is impressed with a gauge for needle and thread. Gold trim and decals on flatbed and machine front and back, serial number under shuttle cover, brand on decals and on round metal plate on back of machine. Front right of machine has a bobbin winder. Treadle belt shows signs of wear and laminate on timber machine cover is peeling slightly.Decal coat of arms on right front of machine: kangaroo on left, man with broad-brim hat, holding pick-axe on right, in centre, top “SEWING MACHINE / THE / A. N. A.” then below it, the rising sun, then below that is state of Victoria shield with the Southern Cross constellation. Wheat sheaves around edge on left and flowering plant on right. Gold ribbon banner at bottom with script “WARD BROS.“ Decal of map of Australia on flatbed of machine. States and capital cities are marked and named (no northern territory), portrait of two men. In centre of map are interwoven letters “A. N. A.” and written in script “WARD BROS.” Decal across front of machine body has large, decorated gold lettering “A. N. A.” Decal across the top of machine “THE AUSTRALIAN SEWING MACHINE COY. PTY. Ltd.” Steel shuttle cover at front has an impressed gage listing cotton and needle sizes and number of stitches. Brass disc on back of machine “A. N. A.” in centre. Brass ruler across front of machine has carved or pressed words in the timber. In centre “INCHES” above ruler and “CENTIMETRES” below ruler, and on right above ruler is “HALF YARD” Decal across back of machine’s body “A.N. A. / MADE IN U.S.A.” Stamped into metal under shuttle cover is “219415” (2 and 5 are partially there, first 1 could instead be a 7) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ward bros., australian sewing machine co., a.n.a., treadle sewing machine, rocket shuttle sewing machine, home industry, clothing, wardana, australian sewing machine company, all native australian, dressmaking, clothing manufacturer -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Furniture - Furniture, small wooden portable cabinet of Dr Polk GP, c1880
Dr Polk was one of the first Doctors to set up a medical practice in Melbourne and attended patients in the Brighton and Moorabbin area c1850. His Grandson Mr C. Bland donated the cabinet to CMHS.This portable cabinet with writing board was used by Dr Polk , one of the first Doctors to practice medicine in Melbourne c1850 .A small, wooden portable cabinet with 3 sections that belonged to Dr Polk GP c1850. Two side cabinets that lock together by grooves on inner sides, and a flat writing board that sits on a shelf at the top of the inner sides. One of the cabinets has 4 drawers, one of which has a lock. The other cabinet has 1 drawer and a cupboard with a door lock No Keys are available, The cabinet is decorated on the outer surfaces by inlaid bamboo squares with metal decorative hinges and handles and at the corners on the door. polk dr, bland c. melbourne, medical practitioners, moorabbin, brighton, pioneers, early settlers, market gardeners, dairymen, farmers, -
Mission to Seafarers Victoria
Furniture - Desk, unknown
This desk was donated to the MTSV in 2017 by a descendant of Padre Oliver, Chaplain from 1930-1960.This desk belonged to Rodney Oliver and is believed to have been used by Padre Oliver and his wife while Chaplain, and the family resided at the MTS and thereafter in subsequent parish postings. The desk makes a link with one of the longest serving Chaplains who had a significant influence through the intense period of operations early - mid 20th C. The Padre's influence was substantial. The desk is also believed to have been used by son Rodney Oliver who also served the Mission as Chairman in the later 20th C.A four drawer leather topped desk with detachable unit comprising double sliding door lockable cabinet with small bookshelf backed with shallow pediment. Sorting / sectioned pigeonhole interiors to the top cabinets see images. The main table desk appears to be of a different wood with green leather inset to top surface and heavy legs. Drawers with heavily decorated brass handles. The top cabinet features finer cabinetry and darker colour wood or stain which could be cedar.with simple narrow reeded decoration. interior two pigeon holes with labelsfrank leslie oliver, padre oliver, chaplain, desk, mission to seafarers, melbourne, seamen's mission, flinders street, padre frank leslie oliver -
Churchill Island Heritage Farm
Furniture - Commode, 19th century
This is a Victorian round cedar commode seat raised on a plinth base with fluted sides. The name ‘commode’ translates in French as ‘convenient’ or ‘suitable’ and could be applied to a dressing table with water jug and bowl for washing oneself and having a cupboard underneath in which to house the chamber pot. It could also refer to a small bedside chest of drawers. In the days before indoor toilets and running water, it was common to have a chamber pot under or near the bed for use during the night or at any time for invalids. The commode seat was a decorative way of concealing the chamber pot by fitting it in a round hole under the lid with the height making it more convenient and suitable for people with limited mobility. The chamber post was removed, emptied and cleaned daily.Victorian Round cedar commode seat, raised on plinth base with fluted sides. Topped with red, yellow and blue embroidered upholstery churchill island, commode, toilet, furniture -
Flagstaff Hill Maritime Museum and Village
Clothing - Combination Undergarment, Late 1800s
This handmade women’s combination undergarment features hand-worked lace panels and trim, and fine pintucks. It is one of seven handmade items of white cotton underwear, all made with beautiful needlework and embroidery skill. The lingerie once belonged to the donor’s great-grandmother’s family, the Paton family of ‘Trefnant’, Yangery, in southwest Victoria. The design of this combination undergarment, or ‘combination’, includes a chemise attached to a pair of drawers or bloomers. The combination is divided, or bifurcated, from the waist to the crutch for easier urinating. This one-piece type of underwear was worn by females from the 1860s and into the early 1900s. The 19th Century garments had front button closures like this one, and those made in the 1900s more often had back closures. Combination underwear was popular because the all-in-one design had far fewer gathers and bulk, making the other clothing look much smoother. The collection of women’s late-19th-century undergarments is an example of clothing that women would include in their wardrobes. The garments add to the study of the evolution of women's fashions and practicality for the early Australian settlers. The fine linen fabric and the careful needlework in these handmade garments and hand-worked lace trims reflect the maker’s dedication to making even serviceable garments beautiful to look at and wear. Women’s white cotton and lace all-In-one combination undergarment. The handmade underwear is a combined chemise and bloomers. It has a front button closure and is trimmed with hand-worked lace panels on the bodice and lace edging around armholes, the neck, and the bottom of the legs. The left and right sides are divided from the waist to the crutch.flagstaff hill maritime museum and village, maritime museum, maritime village, warrnambool, great ocean road, southwest victoria, victorian era, combination undergarment, all-in-one underwear, combination, ‘combinations’, one-piece underwear, one-piece undergarment, chemise and bloomers, combination chemise and bloomers, divided, bifurcated, split, chemise and drawers, women’s underwear, ladies’ underwear, undergarment, women’s clothing, women’s fashion, lingerie, under-structure, 1900s undergarments, 19th-century undergarment, 20th century, handmade clothing, handmade lace, hand-worked lace, paton family, trefnant, yangery, lady's combinations, ladies combinations -
Flagstaff Hill Maritime Museum and Village
Decorative object - Sewing Machine, c 1914-1930
Sewing Machine, Medium C S. (item has 10 parts), treadle operated, in wooden cabinet. Machine body is black with floral decals in gold, cream and red. Cabinet has wheels, 4 drawers containing cylinder shuttle, 2x bobbins, handle from a drawer and a bundle of horse hair. Drive belt is missing, cabinet has evidence of borer. Ironwork on right upright has 2 splits, name on plate of treadle is worn off. Decals include English Made and Approved to Her Majesty Queen Victoria. Machine has Serial Number.Pencilled inside machine support " 11/11/10 H M X" Serial Number "66389" Decals include "MEDIUM C.S / APPOINTED TO HER MAJESTY / QUEEN VICTORIA", "ENGLISH MADE".flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, sewing machine, cylinder shuttle sewing machine, dressmaker's equipment, taylor, jones sewing machine, medium c.s. machine, medium cylinder shuttle machine -
Bendigo Historical Society Inc.
Leisure object - WAX DOLL, 1870 to 1890
Wax doll owned by Elizabeth Annie Robshaw. Doll dressed in cotton lace fabric. Three cotton petticoats. One of lace and pintucks. Two plain petticoats. Cotton drawers. The doll has wax legs with moulded boots, copostion arms. Thumb missing on left hand. Ginger wig. Holes in ears for earrings but earrings missing. No markings on doll. Doll’s face and shoulder plate badly damaged. Clothes need to washed. Large piece of lace in box with the doll. Appears to be of a later date than the doll. Printed sign with doll “Wax doll 1870. Owned by Miss Robshaw.’ -
Bendigo Historical Society Inc.
Leisure object - HEUBACH GERMAN PORCELAIN DOLL, Early 1900
Heubach German porcelain doll. Head badly cracked and taped together. The face is OK. Doll’s eyes are loose. Eyes need to be reset. All parts are separate. Composition body in need of repair. Open mouth. One tooth. Pierced nostrils. Clothed in red cotton drawers with long legs. Not original. Knitted singlet – badly moth eaten. White lawn dress with lace. Tied together with mourning ribbon. Crocheted bonnet lined with silk. Ernst Heubach was a company in Köppelsdorf, Thuringia, Germany, that manufactured porcelain-headed bisque dolls from 1885 onwardsHeubach -
Mont De Lancey
Furniture - Cocktail Cabinet, Mr Franz Striezel, Unknown
This cocktail cabinet is part of a special bequest to the Mont De Lancey Museum of hand carved furniture and items made by Mr Franz Striezel by his grandaughter Mrs Dorothy Adamson. Dorothy was a friend of Nella Lord (nee Sebire). Dorothy passed away in 2007. It was to be known as The Franz Striezel Collection. Franz Streizel came from Germany in 1886 and was one of the three recognised craftsmen (Art Carvers) in Australia who contributed to the wood carvings in public buildings and honour boards throughout Australia. The National Gallery at their request had two small panels and a tobacco jar (some of his work), donated by Mrs D Adamson. They considered these pieces highly valuable.A beautifully hand carved ornate wooden cocktail cabinet featuring two female carved busts, carved mythical beasts on the front, sides and two doors of the cabinet underneath the drop down mirrored shelf. The shelf is attached by two gold linked chains screwed onto the sides. Two drawers at the top are elaborately decorated. The cupboard doors at the bottom open to show a shelf inside. This cabinet is part of a special bequest to the Mont De Lancey Museum of handcarved items made by Mr Franz Striezel by his grandaughter Mrs Dorothy Adamson. Dorothy was a friend of Nella Lord (nee Sebire). Dorothy passed away in 2007. It was to be known as The Franz Striezel Collection.On the top shelf, carved into the relief panels at the back is 'WELL BEFALL' and 'HEARTH HALL'bar equipment, cocktail cabinets, cabinets, furniture -
Port Melbourne Historical & Preservation Society
Photograph - Interior, former grocery shop, 175 Stokes Street, Port Melbourne, Russell Polson, 1991
Shop due for demolition was purchased by artist Helen ..... and restored keeping most of it intact. These pictures were taken at the time of sale by Russell POLSON, a descendant of the Bellions. They were brought in for copying in 1991 by the Bellion's granddaughter, Margaret BRIDE.24 photos taken by Russell POLSON in 1991 of Benjamin Henry BELLION (original builder) and Elzabeth Sarah WALKER's shop and shipping business at 175 Stokes Street.. 1870 to 1959. (.01) cash drawer. (.02) windows. (.03) stables (.04) backyard (.05) back house (.06) bathroom (.07) fireplace (.08) bedroom (.09) stairs (.10) cupboard (.11) shelves (.12) drawers (.13) bench (.14) bench 2 (.15) under windows (.16) bench and door (.17) under stairs (.18) windows 2 (.19) door (.20) stables and yard (.21) backwindow (.22) sideway (.23) kitchen (.24) upstairsbusiness and traders - grocers and supermarkets, built environment - commercial, benjamin bellion, william j bellion, helen leitch, a peterson -
Parks Victoria - Point Hicks Lightstation
Desk
The large cedar desk was formerly used by the head light keeper at Point Hicks. It was made in the nineteenth century, probably by the Victorian Public Works Department (PWD) as an item of standard issue for use in government offices. The PWD operated in Victoria from 1855 to 1987 and was responsible for the design of Victoria’s major public buildings and other infrastructure including the supply of stores, furniture and equipment.The desk has turned legs, leather top and two drawers each with a pair of wooden knob hand pulls and is identical to the large desk remaining at Cape Nelson. A smaller version is at Cape Schanck, and another desk formerly at Cape Schanck is not able to be located. Gabo Island has a small cedar desk or table in the same style. Two sides of the Cape Schanck desk are stamped with the crown motif and monogram of the PWD but it is not known if the Point Hicks desk and the other nineteenth century examples are stamped with these details. There are also c.mid-twentieth century desks remaining in the collections at Wilsons Promontory and Gabo Island. officeThe Point Hicks desk has first level contributory significance for its historic values as government issued furnishing that is original to lightstation’s head keeper’s. Early, large two drawer cedar desk. Each drawer has two wooden handles. Leather insert on top of desk is worn. Commonwealth of Australia, Dept of Transport stamp with stock number on side of desk.On label on side, "C. of A. / D. O. T. / 143581"