The photograph shows a RDNS Sister driving her RDNS car along a dirt road to reach a patient to administer nursing care. It shows the typical conditions of the roads the RDNS trained nurses encountered in some districts. The photograph also depicts an Australian made Holden car of the mid 1960s Melbourne District Nursing Society, later Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 years. At first their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded bicycles, public transport, District cars, the use of a Motor Auxiliary, the Trained nurses (Sisters) own cars, and even a motorcycle were used, and all these forms were intermingled until RDNS had its own fleet of vehicles. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. The Trained nurses of the Melbourne District Nursing Society (MDNS), later known as Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing, and to people of many cultures, throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care the Sisters provided is as follows: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. The Sisters provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Poliomyelistis, Quadriplegia, Paraplegia, Acquired Brain Injury, to those following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.In the centre of this black and white photograph is a Royal District Nursing Service, (RDNS), Sister at the wheel of her RDNS Holden car, which has a black rear Victorian number plate with 'JPH - 516' written in white letters. Through the back window you can see part of the Sister's uniform and her peaked hat worn over her short curled hair. Her left hand is on the upper part of the steering wheel. The dirt road on which she is travelling has mud and some grass tufts either side of it. On the right of the car is a hip roof brick house which has a single storey front area with attached two storey section at the rear. A short open Besser brick fence, with a white wooden gate, is seen running from the front of the property to the house, and beyond this a clothes line and shed. Beyond this, part of a tall paling fence is seen from the front of the property to the shed. The top section of the next brick house is seen beyond the fence; it has a white railed veranda along part of it and the house has a flat roof.Photographers stamp. Quote No. GE 90rdns, royal district nursing service, rdns transport, rdns patient care

These pencils were supplied to the Orbost railway Station office to be used for clerical work. They were used by Victor Smithers who was the Assistant Station Master at Orbost from 1957 - late 1960's. He was also a reliever until the 1970's after which he returned to Ormond Station on the Frankston line where he worked until his death in 1979. The Bairnsdale-Orbost railway was opened in 1916 to serve the agricultural and timber industry. Because of the decline in traffic and heavy operating costs, the line was finally closed in August, 1987. Orbost Railway Station was opened on Monday 10 April 1916 as the terminus of the Orbost railway line, and closed in 1987. The station was located on the west side of the Snowy River despite the town of Orbost being on the east side of the river, in order to save on the costs of a bridge over the river, which at the time had highly variable levels. This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost.Two coloured pencils. 2580.1 is a hexagonal blue pencil and has "Wolff's Emperor MADE IN AUSTRALIA". 2580.2 is a round red pencil with "Wolff's Fintorex MADE IN AUSTRALIA coloured copying". Both have "VICTORIAN RAILWAYS" marked in gold lettering on the sides. orbost-railway-station smithers-victor

Wooden inkwell with bakelite insert made from Australian mulga wood with top turned in steps.Genuine Australian Mulgadomestic equipment, writing equipment, ink well

Badge or pin - souvenir of a Melbourne W2 with the words "Melbourne Australia" under the image. Made in Taiwantrams, tramways, badges, w2 class, souvenirs

About the 1992 Barcelona Olympic Games donor Doug Pleasance wrote- During the 1980's the Australian wool industry was at its most prosperous times with record numbers of sheep producing wool receiving ever increasing values due to the success of the Reserve Price Scheme, and the overall guidance of the Australian Wool Corporation (AWC). As a humble technician, my role was a low profile newly created position of Controller, Technical Marketing where wool was to be marketed on its technical properties, as distinct from the Product Marketing Group which exploited the traditional high profile approach of marketing wool;s superior fashion attributes. The Woolmark was the tool central to this approach. The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The ensemble consisted of three elements- 1. The Official Uniform which was used for travel and all official functions. This included: a tailored blazer and trouser/skirt (all water repellent) by Fletcher Jones, pure wool olive-green faille fabric by Foster Valley, cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, printed wool tie by TD Noone, wool nylon socks by Holeproof and footwear by Hush Puppy. 2. Opening Ceremony Uniform a lightweight wool fabric printed with floral designs that had been inspired by the work of Australian artist Margaret Preston. This included: Lightweight W/PE shorts by Fletcher Jones in Foster Valley Fabric, socks by Holeproof and footwear by Hush Puppy. 3. Village Clothing was designed to be highly visible garments to make it easy to  spot the Aussie and helped to contribute to good team spirit. This included: A pure wool shirt featuring blocks of contrasting colours, and a newly developed stretch 50:50 wool/cotton fabric by Bradmill was made into shorts and jeans by Fletcher Jones.8133.1 - The front of the short sleeved shirt has four colour blocks. The bottom two quadrants of the shirt are yellow and cream, the top two are red, above the cream, and green, above the yellow. The collar of the shirt is cream and the cuffs of the shirt are yellow. The back of the shirt is solid green. There are seven buttons with small amounts of colour on them to do up the shirt, and a motif of Australia made up of curving, crosshatching lines on the left of the shirt, sitting over the line between the red and cream colours. 8133.2 - The front of the short sleeved shirt has four colour blocks. The bottom two quadrants of the shirt are yellow and cream, the top two are red, above the cream, and green, above the yellow. The collar of the shirt is cream and the cuffs of the shirt are yellow. The back of the shirt is solid green. There are seven buttons with small amounts of colour on them to do up the shirt, and a motif of Australia made up of curving, crosshatching lines on the left of the shirt, sitting over the line between the red and cream colours. The bottom hem of the shirt is asymmetrical with the back of the shirt longer than the front. 8133.3 - Red fabric sample. 8133.4 - Red fabric sample. 8133.5 - White fabric sample with permanent marker writing "F22630." This sample also has the tag attached. 8133.6 - White fabric sample. 8133.7 - White fabric sample. 8133.8 - Green fabric sample.8133.5 - On tag - "Allan Robison Textiles Design F22853 82m 30 Wangaratta St Richmond Victoria, 3121, Australia Tel 429 - 9600 Fax 427 - 0594"1992 barcelona olympics, sport, athletes, fashion, design, uniform

HMAS BENDIGO (J187) was an Australian made "Corvette" which served throughout WW2 until 'paid off' on 27 September 1946. The Bendigo Military Museum also holds the last ensign of HMAS BENDIGO, it has a large number of auto graphs. We also hold the wooden crest and Battle Honours Board, this is on loan for 5 years. Refer to Cat 4546 Ensign.1. This is a medium size ships bell. It is cast from Brass. It has a protrusion on the top with a hole in it, used for mounting. The words HMAS BENDIGO 1941 are engraved into the side and painted black. The exterior surface has a few pits, but has been polished numerous times. The interior surface is rough cast, with a large quantity of dints, where it has been struck by the clapper. 2. This is the clapper. There is a steel hook under which is a weight of steel. Under that is a ring. Suspended from the bottom ring is the rope handle. This is an excellent example of navy rope work. At the top of it is a metal ring. Under that is a white and red stylised crown. Under the 'headband' of the crown is a white rope handle with blue inserts. At the bottom is a large rope "Ball" with numerous rope threads of about 180mm length.ww2, ran, hmas bendigo

Used in ...Indicates stage of advancement of such field use materials. Camtech. Paint. face, camouflage. Military sunscreen. Made in Australia. Mid green. Brown. Dark green. Mirror. CAMTECH Paint. face, camouflage NSN6850-66-130-0172 Military Sunscreen RT01/94390C-1^0192

The Kew Historical Society’s collection includes a wide range of leisure objects. Many of the items are European-made, generally of British origin, however there are a number that were made for the Australian market by Australian manufacturers. There were clearly a huge range of toys produced for the Australian and International children’s market in the Nineteenth and Twentieth centuries. The examples of toys in the collection include examples of alphabet toys, arcade toys, baby toys, construction toys, dolls, doll accessories, educational toys, soft toys, tin toys, toy animals, toy blocks, toy machines, toy typewriters, etc. Constructio toy called Bonza-Builda, which was a "KINDERTOY product" made in Australia in its original cardboard box.KINDERTOY PRODUCT / MADE IN AUSTRALIAbonza-builda, kindertoy, toys

Racquet press.Wood with metal corner bolts. Marked 'Made in Australia'. Two wingnuts missing. Materials: Wood, Metaltennis

Banner used during by the Square Dance Club after the creation of Vision Australia. Made by Margaret Fox, who along with her husband Colin, volunteered to teach square dancing at the AFB. Her son remembers that his parents rarely ever drove to a dance together, as they would need both cars to ship down the food made by Margaret to the hall, or ferry dancers to and from dances.White banner with purple writing, dancing couple in green and letters V and A in green and purpleVision Australia Blind Sports Square Dance Clubrecreation, vision australia, margaret fox

Stove brush, round one end and pointed the other. Wooden handle attached to body by two screws. Made in Australia. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, stove brush

World War 2 Army uniform of Capt. Noel Edmund Charles West. Donated by Mitcham RSL after it closed in 2013. After the war Capt West served in Japan with the 27th War Graves Unit.Pair of service green wool putees with cotton tapes. Labels on one end. V414 1942 size Made in AustraliaV414 1942 Size Made in Australiacostume, male uniform, military

The two wooden oars were formerly painted white. They were used on lightstation boats and are now displayed on the wall of Room 2 which is located next to the light tower. Numerous images of the lightstation show rowing boats either on stand‐by on land or in the sea performing duties in the surrounding sea and at the East Landing. The wooden boat rudder with brass and other metal fittings was also formerly painted white and is possibly from the same boat that used the oars. Meets second level threshold.Two long wooden oars, Residue of white paint. Possibly made of Australian hardwood. They were used on lightstation boats.

2 AMIDA White China cups made in Japan 2 saucers green RAN emblem 1 saucer blue RAN emblem made in Australia by B.Ristle dinner plate blue RAN emblem made in UK made by Melba Large serving plate blue RAN emblem made in Australia by Westminster RAN emblem

Shell dressings are a type of bandage with a gauze pad and a safety pin for fastening around the site of the injury. This item was made by Johnson & Johnson Pty. Ltd., Sydney, in or before January, 1942. Shell dressings were carried by individual soldiers and medics intended to be used as a first dressing in event of wounding or injury. The Australian-made shell dressing is opened by breaking the stitches at the top rather than pulling tapes apart as per the British design.Rectangular, light brown fabric pouch. The front is printed with black text in a rectangle explaining the instructions for opening the pouch and directions for use of bandage. The maker's name and date of manufacture are printed under the directions. Sewn together in two locations on the top. Irregular shaped medium brown stain on back.world war two, shell dressing, medical supplies, medical, wound dressing, johnson & johnson

BHS CollectionHorwood Collection - Wooden Poppet Legs. Wooden poppet legs in Kneebone Street, off Eaglehawk Road. Markings; Made in AustraliaKodakmine, gold, poppet head, horwood collection - wooden poppet legs. wooden poppet legs in kneebone street, off eaglehawk road

Made in Australia by Middy's Used by a pioneer family in Moorabbin. Manufactured by Middy's: Arriving in Australia at age 19 by ship at Port Melbourne, Dutch immigrant Petrus Cornelis Nicolaas Middendorp (1891-1963) settled in Melbourne to apply his trade as a cigar maker for the British American Tobacco Co. Retiring from the cigar industry and following his work as an honorary orderly tending WW1 Australian casualties in Paris and Melbourne, Petrus began selling Dutch manufactured light globes, vacuum cleaners and other electrical products imported from Holland and England. Warehousing and sales of the goods were undertaken from 1928 by the ‘Middendorp Goods Supply Company’ initially located in Flinders Lane in Melbourne’s CBD, then moving to McKillop Street, followed by a basement store at 148 Queen Street. During the 1940s a manufacturing plant known as ‘Middendorp and Sons’ was established in the Melbourne suburb of Preston, where Petrus’ three teenage sons Peter, Nick and Hugh joined him. Peter and Hugh worked with a small team of staff to produce rubber plug tops, extension sockets, double adaptors and a small range of bakelite accessories, whilst Nick became the first sales rep calling on customers and construction sites. The products were sold under the brand name of ‘Middy’. A name change of the distribution business took place in the late 40s and Middendorp Electric Company Pty Ltd was officially registered in 1948. The manufacturing operation ceased during the late 50s due to the introduction and acceptance of plastic and injection moulding. However, the Middendorp family had positioned itself to further establish its electrical wholesale business with the first branch and Head Office opening in 1956, located at 520 Latrobe Street, Melbourne. By 1962 there were five trading branches, growing to 25 in 1986 and 101 by 2018 Australia wide. Middendorp Electric, more commonly known as Middy’s and readily identified by its trademark colour of Middy’s pink, has developed into the largest privately owned Electrical Wholesaler in Australia. In 2015 Middy’s acquired Mekolec lifts fire and electrical adding presence and sector expertise in Melbourne’s inner south. In Sep 2018 Middy's acquired Salmon Brothers Electrical, with 5 Branches in Sydney's Metro region and in 2019 they acquired Goulburn Electrical Wholesalers greatly adding to Middy's location coverage in NSW and providing Middy’s the ability to better service NSW contractors. Bakerlite electrical fittingMiddy - Made in Australiamiddy's, moorabbin pioneers, electrical, bakerlite

The first Australian cast iron stove was made by Charles Andrews in 1877 he patented his design and called it the “Andrews Nonpareil stove.” That for many years was the only Australian made kitchen stove on the market. When his patent expired numerous imitations were manufactured by other firms but the Nonpareil continued to earn a reputation for quality, economy and excellent cooking. The company operated at 47-10 Gheringhap Street Geelong, Victoria, they also specialised in hot water generating services.The subject item is significant as a copy of the well known design for the original Nonpareil stove by Charles Andrews. The name Andrews Nonpareil in stamped on the flue however the doors on the stove front are wrong and indicate the item is a copy by an unknown manufacturer probably made in the first quarter of the 20th century. Stove cast iron on 4 legs, two oven spaces with round doors. On flue "Andrews Patent Nonpareil".On flue "Andrew Patent Nonpareil"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, stove, iron stove, andrew patent nonpareil, cooking appliance, oven, combustion oven, cooker

Tin metal hinged with lid coloured red, white and blue with leaf and floral border. Marked "Best British Razor" Made in Australia.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tin, best british razor

EIG School - Ralph Birrell Collection - Latrobe Uni Construction, 1965-69. Students in classroom. Markings in plastic: Perutz, Made in Australia.Perutzeducation, tertiary, latrobe university bendigo, eig school - ralph birrell collection - latrobe uni construction, 1965-69. students in classroom

EIG School - Ralph Birrell Collection - Latrobe Uni Construction, 1965-69. Enginering equipment. Printed in plastic: Perutz, Made in Australia.Perutzeducation, tertiary, latrobe university bendigo, eig school - ralph birrell collection - latrobe uni construction, 1965-69. enginering equipment.

Four folds green paper pamphlet for two billiard tables models and accessories made by Australian company Ace, located in Fitzroy, Melbourne.ace, billiard table, australia, diner, earl, fitzroy