Japanese Shi-gunto Army Officers sword and scabbard. The guard is rectangular in shape with cherry blossom motifs. The hilt is encased in Shark skin (?) Scabbard is made of painted steel. Brass fittings on the wooden scabbard encased in an enamel painted metal sheathWorld War Two Japanese NCO/Officer sword and scabbardCherry Blossom inscription on guardjapanese sword officer scabbard shi-gunto samuri cherry blossom

This flexible measuring tape was used by the SEC Victoria in the mid to late 1900's. It was in a period before digital measuring instruments were in use. This is a 33ft long tape measure and would have been used by the construction workers when building the Kiewa Valley Hydro System. The warning details (embossed into the leather covering) was to warn users to be careful not to use the tape near live electricity terminals or linkages. This tape was produced mainly for wooden structures and not electricity conductive material. This was during the 1950's to 1960's.This imperial tape measure is very significant to the Kiewa Valley as it was used in the construction of the Kiewa Valley Hydro Scheme of the 1950's-1960's. It provides evidence that small measuring equipment used in the construction and the continuing maintenance of the scheme was of the imperial measure and used by construction workers who remained and settled in the town of Mount Beauty and Kiewa Valley long after the construction period. This flexible metallic measuring tape (33 ft in length) is contained in a round circular leather bound container. It has brass fittings (winder and tape guide) and is stitched with heavy grade twine. The tape measure is graduated in feet and inches on one side and yards on the other. Embossed in the leather casing"MADE IN ENGLAND" and around the inner circle "HOCKLEY ABBEY" and "JOHN RABONE & SONS"imperial tape measure, distance measures, imperial tools

Hand operated pressure pump with water reservoir. High and low pressure hoses. Low pressure for filling reservoir, high pressure reinforced hose for delivering water to item to be pressurised. Brass fittings. Reservoir painted pale green and operating handle yellow & red.

The Archimedes drill, also known as a fretwork drill, is an old type of drill which works on the Archimedian principle; the drill rotates quickly as the barrel on the stem is worked up and down. This tool provides a quick and easy way to bore holes through ordinary fret wood and other substances, smaller versions are used in jewellery making where precision drilling is required. There were numerous different sized Archimedes drills made from various materials, usually a combination of wood and steel, some being all steel and some including brass parts. The fancier versions of these drills included parts made from Rosewood, Ebony, Ivory and decorative brass parts. Some of the later Archimedes drills had technological improvements such as a ratchet device and the inclusion of fly-weights. The ratchet device allows the drill to revolve continuously in the cutting direction. The fly-weights give momentum to maintain the speed of the drill during the upward stroke of the hand. Most old examples have no makers names.A vintage drilling tool, the item therefore could have been used in various industries or professions where precise drilling is required. Archimedean drill with Rosewood hand, brass grip and fittings Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, archimedean drill

Military officers waist belt used on full dress occasionsAs manufactured and distributed by GMHBrown leather waist belt with brass buckle and fittings,military, belt, officer

Edgbaston is now an affluent suburb of Birmingham. The relation of the owner, James Griffin, to the donor (a resident of Kew) has not been identified. 'The Gentleman's Magazine' of 1845 contains a reference to the death of Mary, aged 12, at Brighton, the daughter of James Griffin of Edgbaston and of Withymoor Works, Dudley. (p.325). Coincidentally, James Griffin, a manufacturer of Withymoor Works was issued with a patent for his improvements in the manufacture of "spades, shovels, and such like tools" on 5 October 1843. Withymoor Works was owned by James Griffin & SonNineteenth Century leather document wallet that was brought to Australia by James Griffin's descendants.Brown leather wallet with inserted gussets to side and brass plate with lock to front and a fold over flap with brass fitting which clips shut and can be locked and leather double stitched casing to back for inserting a belt with key to lock inside. The owners name is engraved on the clasp."James Griffin / Edgbaston."cases, wallets, edgbaston, james griffin, withymoor works

.3) Arthur CowleyWebbing belt & kit. .1) Belt with shoulder straps, khaki webbing, brass fittings. .2) Shoulder strap. .3) Back pack, khaki webbing with discoloured metal fittings. .4) Gas mask pack, khaki canvas with webbing straps & metal fittings. Ventilation holes at sides..1) Stamped in ink inside surface: “ZL&T 1945” .3) Handwritten inside flap: “A Cowley” .4) Stamped inside flap: “VII RMA 1942” On press studs: “Newley Pat, 1430.22*”military equipment - army, packs, gas

Ladies companion, red velvet covered box with brass fittings, red silk lined lid, containing 7 tools, some made of bone, for various uses including button hooks. Red leather covered wooden base with small feet and secured with a small brass catch on front.costume accessories, female, ladies companion, see peter cuffley's book chandeliers & billy tea.

Grace James, the creator of the items in the Grace James collection, designed and created costumes over a 19 year period (1969-1988) for her daughter Ceri. The collection of clothing ranges from evening wear to knitted garments. All the items display exemplary dressmaking skills. The designs are of the period and reflect evolving fashions of the time. Some items are copies of published designs whereas others are original creations. The collection was donated in 2006.While most of the items in the Fashion & Design Collection of the Kew Historical Society are commercially designed items of clothing, there are also items made by home dressmakers. Many of these exhibit outstanding design knowledge and technical skills. A large and important group of these items of women's clothing is contained in the Grace James collection of outfits created for the dressmaker's daughter. The items have additional significance due to information about the purpose of the creation and the date when it was constructed.Three piece brown outfit comprising a long dress, a separate bodice and a belt of scarf. The outfit is made of a synthetic fabric. The long plain brown dress has been designed with a matching bodice that features a tan trim; the wide belt/scarf is striped. Brown silk purse with brass fittingsgrace james, women's clothing, australian fashion 1969-1988, dressmakers - surrey hills (vic), fashion -- 1970s, fashion design

Framed, black and white photograph with names inscribed on light green card mount; brass wall fittings on each end. Inscribed on mount below photograph: Ballarat College Football team 1902 / Back row from left / Quiney, Leo Charles, Lambert, Not known, Martin, Jackson, A McCoy / Chapman, G Tyler, E Holgate, Smith. Teacher G Hay / Front row: / Batch, Frank Williams, H Heinz, G Pinney, Tommy Williams, J Walker, W Hartley, S Sim, R Conners / Seated on ground / R Holgate S Walker

Three pieces of wood with one curved side and two angled sides that come together to form a circular shape. the tops have brass fittings that are attach by hinged mechanisms to a brass plate with a short three centimetre diameter thread on top. At the base of each is a long metal spike with an attachment to push in into the ground.surveying equipment, mapping, wooden trypod

A cylindrical brown leather cabin hat box. it has a leather hinge with a metal lock at the front. On top is a leather handle with metal (brass?) fittings. There is a variety of labels pasted on. They include : On sides - Kindly place this label on the end of the package. P.&.O. SN Co Bombay to Melbourne Passrenger's Name - T. D. GoveIn gold paint T.D.G. 2 x in gold print G-90mmstorage luggage container hat-box

The telescope is original to the Wilsons Promontory Lightstation and was provided by the Department of Shipping and Transport in about 1900. The device magnifies images of distant objects through its curved interior mirrors, and lightkeepers used this telescope to monitor and record the names of ships, the time they passed, and their direction, as well as read meanings of flags and other visual signals communicated by vessels. The telescope is similar to Cape Nelson’s two metre long telescope, which is included in the VHR registration for the Cape Nelson Lightstation. It is particularly important for its good condition, completeness and confirmed provenance and has first level contributory significance to the cultural heritage values of the lightstation..1 Brass telescope, cylindrical tube shape with mobile interfolding sections. Middle section of tube has been covered with textile or leather and painted black. Narrow plaited rope fixed as a border to this section is also painted black. .2. The telescope is attached by a brass fitting to a wooden tripod on a three legged triangular ply wood base with three castors.

Camouflage pattern (black, green, brown, khaki) cotton 'giggle' hat. Four brass ventilation fittings in crown. Manufacturer's label sewn inside. Label side 1 - John Star Pty. Ltd. NSW 02-669-1066 Name ............ (note - no name shown) No. ................ (note - no number shown) 100 % COTTON Made in Hong Kong" Label side 2 - care instructions headgear, combat

Blackened canvas leather fittings with brass eyeletsCGCF

Items in collection re T. Pattison, refer Cat No 5342.4..1) Shirt, light khaki, cotton, long sleeved with patch on each sleeve of Warrant Officer insignia. .2) Tie, khaki, woollen, rib pattern. .3) Belt, black, webb, brass fittings at end. .4) & .5) Belt, brass, keeper clips. .6) & .7) Belt, brass clips. .8) .9) .10) & .11) Hooks, brass, for securing clothing to the belt.uniforms - army, accessories

Signals webbing satchel bag, khaki colour. Satchel has adjustable shoulder strap with brass buckles & fittings, 1 strap & buckle on the bag inself, brass.“Satchel Signals MCC 1943”containers - military, communications - signals

Hanger, William Robert B. 1907 Aust Inf Corps. VP3651 NAA file covers 1935. The jacket was probably from Hanger, William Robert.1. Dark Khaki woollen jacket. Four pockets. Darkened AMF buttons. 38Bn colour patch on shoulders. darkened Major's badge on epaulettes. Rising Sun on collars. One medal ribbon on chest - Efficiency decoration. 2. Cotton polyester short sleeve shirt. light plastic buttons with epaulettes. 3. Tie, Khaki, Polyester. 4. Belt, Sam Browne, tan leather with brass fittings.4. Belt. Written inside belt is "Donated by Capt. D.F.V. Hufer A3/92041”. There was another name, it has been obliterated. Another name - “Capt. W.R. Hanger VP 3651”.ww2, 38 bn, passchendaele barracks trust

Khaki webbing belt with brass buckles, clasps and brass keepers for length adjustment. At the back of the belt there are two additional brass webbing fittings for attaching basic webbing straps."HALL"passchendaele barracks trust, webbing belt, equipment

Francis Robert LEONARD SX8804. Enlisted 13/07/1940. Discharged 17/01/1946. Rank Private, 2/166 Aust Workshops.Khaki webbing belt with evidence of green colouring. The belt has brass clasp fittings and brass sliding keepers. On the inside of the belt, the sewn in adjustment points are very worn and have been well used. There are two close additional brass webbing attachment points towards the centre of the belt."SX8804"passchendaele barracks trust, leonard, webbing belt, equipment, ww2

This tenon saw was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This saw is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This saw was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Tenon aw. Hand saw with small-toothed metal blade set into a slotted brass back, attached to a round brass fitting in the light coloured, turned wooden handle. Top on handle is marked with two concentric rings scored into the wood. On top of blade is maker’s name Dennan & Robinson. This tenon saw is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. "Dennan & Robinson"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, saw, wood cutting tool, tenon saw, carpenter's saw, dennan and robinson, sovereign of the sea, ship model, hobby, ship model tool

.1) Hinged lid wooden box with brass fittings and green felt covered rests inside. .2) "Fuller" type circular slide rule calculator Model No. 1. .3) Brass stand which slots into one end of box and holds calculator in position for ease of use. .4 ...7) Instruction booklets for operating the calculator. .8) Letter from importer re enquiry for circular slide rules to be used at Thompsons Engineering and Pipe Works.Imprinted on bakelite base of cylinder "Stanley / Trade Mark".trades, drafting, instruments, measuring

The Samuel Browne belt is named after Sir Samuel James Browne VC. In 1858, Browne lost his left arm in battle (as a result of a sword cut) and as the dress regulations of his regiment required officers to wear their waist belts under their tunics, Browne found this ungainly and devised an external belt supported on the left-hand (sword) side by a shoulder strap. The belt had two shoulder straps when a holster was worn. In the Australian Army, a brown leather version is worn on ceremonial occasions by officers and Warrant Officers Class One of all corps, except those who wear silver dress embellishments (Armoured, Aviation and Nursing Corps). These members wear a black Sam Browne belt. Wide brown pattern stitched brown leather belt with adustable shoulder strap, brass buckle and brass loop fittings (4 at the top and 2 at the bottom) attached to the belt by stitched leather straps.Nonesam browne, belt, clothing

Mr John Wilson Gillie was born on the 31st of March 1864. On the 31st of July 1880 he was apprenticed for four years to J.J. Wilson and Sons, Nautical Instrument Makers of Sunderland. Following the apprenticeship he spent six months to a year as an ‘improver’ in Glasgow, and then started a new company ‘Wilson and Gillie’ in North Shields. At this time sail had just given way to steam and wooden ships to steel, and the railways were competing with colliers for the carrying of coal from the North East of England to London and the South. In 1858 only seven out of 44 shipyards on the Tyne were using iron, but by 1862 there were ten, employing around 4,000 men. These changes had a significant effect on nautical instrument manufacturers, as the magnetic compass for a wooden sailing vessel was very simple and required little in the way of compensation. For steel vessels much more was required and this was a period of great development, both in the compass bowl and the binnacle in which it was housed. In 1870 Sir William Thomson (later Lord Kelvin) designed his dry card standard compass, which completely replaced all previous designs. Wilson and Gillie started as agents for the Thomson compass, but later J.W. Gillie, using similar principles, redesigned the compass suspension and patented the ‘UNIT’ standard compass. It became popular with local shipowners and shipbuilders. In 1910 the firm of John Lilley and Son (which had been established in London in 1812), found themselves in financial difficulties and were saved with the help of John Wilson Gillie, who established, on the 8th of August 1911, a new firm of John Lilley and Son Limited. John Lilley and Son had been the sole London agents for Sir William Thomson, a very enviable position during this period, when the Thomson compass led the field. Unfortunately, Mr. Lilley had quarreled with the Glasgow company, who withdrew the agency and established their own branch in London (later to become Kelvin White and Hutton). On November 7th 1913, the firm of John Lilley and Son Limited of London amalgamated with Wilson and Gillie of North Shields, and after this date instruments manufactured by the two companies bore the name John Lilley and Son Limited of London and North Shields. During the 1930s many of the London nautical instrument makers were in difficulties, including John Lilley and Son Limited and Reynolds and Son, Dobbie and Clyde Limited, and Mr. J.W. Gillie arranged an amalgamation between these two companies. The new firm became Lilley and Reynolds Limited. In 1943, with estate duties in mind, the North Shields company was reconstituted and took the name of John Lilley and Gillie Limited, although the shareholders, directors and personnel remained unchanged In the early 1970s Lilley and Gillie developed close links with Observator in Rotterdam, who manufactured one of the first fully reliable transmitting magnetic compass systems. The Observator shareholders, Holland America Line, bought the share capital of John Lilley and Gillie Limited., but retained all the personnel and the directors. (See Links for more information)A significant item of early 20th century marine navigational equipment made by a leading manufacturer in the field from a company that is still producing marine navigational instruments today. John Lilleys company began in 1812 growing at a time when the transition of compasses from timber ships, to steel vessels. Compasses at this time required a method of compensation to allow their inclusion in steel vessels without magnetic deviation. This therefore was a period of great development, both in the compass bowl and the binnacle in which it was housed and the Lilley company were leaders in the field. Ships binnacle, wood with brass fittings, consists of 2 brass lamp holders, place for compass, Also has an inclinometer with a scale 40 to 0 to 40, one red and one green iron Kelvin compensation balls, one on each side of binnacle denoting port and starboard, a brass cylinder attached perpendicular at the rear for storing a Flinders Bar, 2 hinged cupboards containing adjustable wooden racks with drilled holes in them to hold iron Heeling error magnets.Textured brass plate attached to front stating "JOHN LILLEY & SON LTD (WILSON & GILLIE), NAUTICAL INSTRUMENT MAKERS, NORTH SHIELDS" . Inclinometer has "JOHN LILLEY & SON LTD (Wilson & Gillie) LONDON & NORTH SHIELDS" engraved. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, binnacle, john lillie & son ltd, compass

Object. A 4.5 cm long suspended from a brass curved and decorated clasp at the top, to which is attached at the back, a 6.5 cm long pin , to attach to the wearers garment. This shaped brass clasp is repeated at the lower edge of the ribbon. Two Lodge symbols attached to the centre of the ribbon in a Xshape. Suspended from the lower brass clasp, which is scroll shape, is a brass fitting, from which hangs a perspex four sided shape, with lodge symbols printed on each side.organisation, masonic lodge, brass, perspex and ribbon lapel badge