This kit bag belonged to Keith Litchfield Arnel. Born in Kensington on 23 August 1910, and enlisting in Melbourne at the age of 33 on 14 July 1944, Keith Arnel served in the Royal Australian Air Force. At the time of his discharge, Keith Arnel had become a Flying Officer with the Air Force Headquarters Telecommunications Unit. Keith Arnel had two service numbers, VX68230 and 129880.Blue-grey kit bag, cylindrical in shape, constructed of one circlular piece at base with rectangular piece forming sides. Open at one end and fastened with a cream cord drawstring threaded through metal eyelets and fastened with a brass D shaped ring threaded through two eyelets. Inscriptions in cream-white paint on side of bag. One D ring attached to the circular base, possibly for the purpose of attaching a strap to form a duffle bag.Inscribed on side of bag “K.L.ARNEL/R.A.A.F./129880”kit bag, duffle, luggage

This scent bottle would have been attached to a belt or handbag and would have belonged to a woman of some means. It would have been in use when the owner was outside or travelling and used to combat the unsavoury smells of a farm or industrial area. This item is of interest as an object used by women more than a hundred years ago. It has no known local provenance and will be useful for display This is an egg-shaped perfume bottle made of opaque glass (opaline?). It has an inner lining and cotton wool inside the lid of the top. The top is brass with a brass hinge. Attached to the lid is a brass chain and circular ring to attach the bottle to a chatelaine belt or handbag. The chain was once attached to the bottle in two places but one section has been broken.social history, warrnambool history, scent bottles, milk glass scent bottles, antique scent bottles

This box was made for the Royal Dunkeld School in Scotland to participate in a flag exchange with with the Dunkeld State School No 183 in Victoria, Australia in 1910. It was made from the wood of one of three Larch trees planted in Dunkeld Scotland by the 2nd Duke of Athol from seeds which were brought from the Tyrol. The tree was struck by lightning in 1905 and died over the next few years. It was cut down and some of the timber was used to make the box.This box was sent to the Dunkeld State School from the Royal School of Dunkeld, Scotland and part of a state wide flag exchange in Victoria in 1910. Schools were encouraged to contact schools with a similar name. This box contained a Union Jack which was first flown at the Dunkeld, Victoria school on Empire Day 1910. A box made of Australian Ash was sent to Scotland with an Australian flag enclosed.Timber box made from larch wood. Silver shield on the lid and plaque on the front edge of the lid and crossed flags on the front of the box with a portrait of King George 5th and a banner engraved "God Save the King". Handles on the end are brass lions heads with rings through their mouth. Lock keeper is silver in the form of a Maltese Cross.. The lid has bevelled sides and ends and the interior has strengthening bars in the corners and inside the lid is the provenance of the timber.On top a shield with a bird and a thistle and the letters RDS. Below this a bannet with the words Forward with Honour. On the front bevel of the lid a plaque with "Presented to Dunkeld State School Victoria Australia from Dunkeld Royal H.G. School Scotland 24th may 1910. On the front. Banner with God save the King. Crossed flags representing either the Union Jack or the Scottish Saltair and the Australian Flag and a medallion with the head of King George 5th in relief.

This compressor was part of the E.G. Ward Collection. It is connected to the diving suit and boots also in our collection. Siebe Gorman & Company Ltd was a British company that developed diving equipment and breathing equipment and worked on commercial diving and marine salvage projects. The company advertised itself as 'Submarine Engineers'. It was founded by Augustus Siebe, a German-born British engineer chiefly known for his contributions to diving equipment. Siebe Gorman traded as an engineering firm for over 180 years from 1819 to 1999. The early success of the business was due to its founder, the Prussian immigrant Christian 'Augustus' Siebe (1788-1872). For business reasons, he applied for and was granted British citizenship in 1856. He was a gifted engineer who was able to translate theoretical problems into practical, working products. During the industrial Victorian period, the business traded as 'A. Siebe' at 145 High Street Holborn London, but in 1828 new premises were acquired at 5 Denmark Street, Soho. The family firm produced a wide range of manufactured goods including paper-making machinery, measuring machinery, water-pumps, refrigeration equipment and diving apparatus. Augustus Siebe specialised in submarine engineering early on and the company gained a reputation for the manufacture of safe, reliable diving apparatus. Augustus Siebe is best remembered for the development and manufacture of the ‘closed’ Diving Dress based on the ideas of Charles and John Deane, George Edwards and Charles Pasley. Apart from some small modifications to valves and diver communications, the basic 12 bolt ‘closed’ diving dress remained relatively unchanged after the 1870s. Later company successes were also based on innovation, with new products that could be successfully developed and manufactured to high standards. This was largely attributed to the inventive nature, foresight, engineering and entrepreneurial skills of Robert Henry Davis (1870-1965). In 1882, RH Davis joined the company of 'Siebe & Gorman' as a young 11-year-old office boy and he was to remain with the company until he died in 1965. Augustus Siebe retired in 1869 and handed over the company to a new partnership of Henry H. Siebe (1830-1885) and William A. O'Gorman (1834-1904). The new firm traded as 'Siebe & Gorman' (1870-1879) from premises in and around Mason Street, Westminster Bridge Road, Lambeth, London. The two partners soon recognised the potential of R.H. Davis and in 1894, aged 24, he became General Manager of Siebe & Gorman. Davis increasingly ran the company until the surviving partner (W.A. Gorman) died in 1904. The firm was disposed of to the Vickers (armaments) family and a new company 'Siebe Gorman & Co. Ltd.' (1905-1998) was formed. Under the chairmanship of Albert Vickers, R.H. Davis was kept on as Managing Director, and the company forged ahead. However, after WW1, the Great Depression caused manufacturing output and share prices to slump. In 1924 Robert Davis made a deal with the Vickers Board and acquired control of the company through majority shares. Under his leadership, the Siebe Gorman Company flourished and within time, four of his sons also joined the firm. The company gained a worldwide reputation for the manufacture of diving apparatus, decompression and observation chambers, and safety breathing apparatus of all types for use on the land, in the air and under the sea (including mine rescue, tunneling, aircraft, diving, submarine escape and in other hazardous environments). Close research and development links with the MOD (especially the Admiralty), also provided a lucrative outlet for the company products. In 1932, Robert Davis was knighted by King George V, principally for his invention of the ‘Davis Submerged Escape Apparatus’ (D.S.E.A.). Siebe Gorman essentially remained a family firm from the beginning (under A Siebe) until it became a public company for the first time in 1952. However, following WW2, British manufacturing stagnated through stifled investment and post-war austerity, and there was little innovation. Siebe Gorman fortunes began to decline as an ageing Sir Robert Davis failed to invest, or change the company business and management practices. In 1959, Siebe Gorman was acquired by the “Fairy Group” and the ailing Sir Robert was made Life President. Consequently, nothing changed and the slow decline continued until Sir Robert's death in March 1965. Around 1960, Siebe Gorman acquired the diving apparatus manufacturer C E Heinke, and for a brief period, it manufactured some diving equipment under the combined name of Siebe Heinke. Around 1964, Mr. E. 'Barry' Stephens was appointed as the new Managing Director to modernise Siebe Gorman. Changes were made, including a move to a new factory in Wales in 1975. The new company concentrated on fire fighting breathing apparatus and escape equipment, and the move coincided with the loss of many of the older, traditional craft skills. Between 1985 and 1998, Siebe expanded through acquisitions, and several other companies were acquired. The Siebe Gorman (diving apparatus) company has therefore traded as A. Siebe (1819-1870); Siebe & Gorman (1870-1879); Siebe Gorman & Co (1880-1904); Siebe Gorman & Co. Ltd (1905-1998).The compressor is a very significant item as it gives a snapshot into marine history and the development of diving equipment generally especially that used for salvage operations before and during WW2. Siebe & Gorman the company that made the equipment was a leading inventor, developer and innovator of marine equipment with its early helmets and other items eagerly sought after today for collections around the world. The items in the Flagstaff Hill collection give us an insight as to how divers operated and the dangers they faced doing a very necessary and dangerous job during the early days of marine exploration.A single cylinder divers' pump by Siebe Gorman & Co Ltd, London, eccentric hand cranked in brass mounted mahogany case with instructions to the underside of the lid, brass covered pressure gauge and air outlet, brass makers plaque to the front, water inlet and outlet to the rear, green painted lifting rings. Machinery has some blue painted areas on the metal.Plate on the back 'WATER SUPPLY" "WATER OVERFLOW" "WATER DRAIN-IN" Pressure gauge dial "BOURDON'S PRESSURE GAUGE" STEBE GORMAN & CO. LONDON", "LBS PRESSURE" "FEET OF SALT WATER" Plate on the front " PATENT, Siebe Gorman & Co Ltd Submarine Engineers" below emblem (Lion, Crown, Horse)flagstaff hill, warrnambool, flagstaff-hill, maritime-museum, diving compressor, london, siebe gorman & co ltd, marine technology, life saving, deep sea diving, maritime museum, maritime village, manine history

The breeches buoy and traveller block are part of the beach rescue apparatus used by lifesaving crew overseas and in Australia in the 1860s to 1960s. The breeches buoy (or chair bucket or petticoat breeches) were invented by Lieutenant Kisbee by the 1850s. It looks like a pair of canvas shorts with a cork lifebuoy ring attached around the top. The set-up works similar way to a zip wire and allows for two-way travel. Saving lives in Warrnambool – The coastline of South West Victoria has had over 600 shipwrecks and many lost lives; even in Warrnambool’s Lady Bay there were around 16 known shipwrecks between 1850 and 1905, with eight lives lost. In 1859 the first Government-built lifeboat arrived at Warrnambool Harbour and a shed was soon built to house it, followed in 1864 by a rocket house to safely store the Rocket Rescue equipment. In 1878 the buildings were moved to the Breakwater area, and in 1910 the new Lifeboat Warrnambool arrived with its ‘self-righting’ design. For almost one hundred years the lifeboat and rocket crews, mostly local volunteers, trained regularly to maintain and improve their skills, summoned when needed by alarms, gunshots, ringing bells and foghorns. Some became local heroes but all served an important role. By the end of the 1950s the lifeboat and rescue equipment had become obsolete. Rocket Rescue Method - The first use of a lifesaving rocket rescue system is often credited to Captain Manby and his invention of a life mortar, first used in 1808 to fire a line onto a ship to rescue lives. Henry Trengrouse’s invention of 1820 was the first to use a sky rocket’s power to throw a line, and his invention included a chair for carrying the shipwrecked victims to shore. In 1832 John Dennett invented a rocket specifically for shore to ship rescue. It had an iron case and an 8 foot pole attached and could shoot the line as far as 250 yards (about 230 metres). From the 1860s the rocket rescue apparatus was in use. It comprised a breeches buoy and traveller block that was suspended on a line and manually pulled to and from the distressed vessel carrying passengers and items. Colonel Boxer, who had invented an early line-thrower, designed a rocket in 1865 with a range from 300 to 470 yards. It was the first two-stage rocket, with two rockets placed one in front of the other in a tube that carried the rescue line. The hemp line was faked, or coiled, in a particular way in a faking box to prevent twists and tangles when fired, and the angle of firing the rocket was measured by a quadrant-type instrument on the side of the rocket machine. Schermuly invented the line-throwing pistol around 1920, which used a small cartridge to fire the rocket. Victoria’s Government adopted lifesaving methods based on Her Majesty’s Coast Guard in Great Britain, which used Colonel Boxer’s rocket apparatus rescue method. The British Board of Trade published instructions in 1850 for both the beach rescue crew and ship’s crew. It involved setting up the rocket launcher on shore at a particular angle measured by the quadrant, inserting a rocket that had a light-weight line attached, then firing it across the stranded vessel. A tally board was then sent out with instructions in four languages. The ship’s crew would haul on the line to bring out the continuous whip line and attach the whip block to a mast or sturdy part the ship. The rescue crew on shore then hauled out a heavier hawser line, which the ship’s crew fixed above the whip block. The hawser is then tightened using the block on the shore end of the whip. The breeches buoy and endless whip are then attached to the traveller block on the hawser, allowing the shore crew to haul the buoy to and from the vessel, rescuing the stranded crew one at a time. The rocket system could also be used from one ship to another. This item is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Breeches buoy and traveller lock; white canvas breeches (shorts) with lifebuoy ring attached to its waistband, with ropes for attaching it to the traveller block. Wooden traveller block has double brass inline sheaves and brass rollers on each cheek of the block, and each shell is scored for the strop. The thimble attached to the strop has a wooden slat for quick release of the breeches buoy. The ropes comprise of two equal lengths of rope that have been bunched together to form two loops, then bound together just below the loops, while the four hanging ends are looped around the lifebuoy, equally spaced, with each end finished in an eye-splice. The apparatus is suspended by the loops at the top and attached to the traveller block, which has a quick release device.flagstaff hill maritime museum & village, flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, maritime accidents, shipwreck victim, rocket crew, beach rescue, line rescue, rescue equipment, rocket firing equipment, rocket rescue equipment, rocket apparatus, beach apparatus, petticoat breeches, breeches buoy, rocket house, rocket shed, lifeboat men, rocket equipment, rocket machine, rocket head, rocket launcher, rocket line, marine technology, william schermuly, line-firing pistol, line throwing gun, schermuly pistol, pistol rocket apparatus, beach rescue set, traveller, block, running block, pulley, hawser, faking, faking box, faked line, rescue boat, lifeboat, lady bay, warrnambool harbour, port of warrnambool, tramway jetty, volunteer lifesavers, volunteer crew, breakwater, lifeboat warrnambool, rocket rescue method, rocket rescue apparatus, captain manby, mortar, henry trengrouse, sky rocket, john dennett, shore to ship, colonel boxer, two-stage rocket, italian hemp, quadrant, schermuly, line-throwing pistol, line throwing cartridge, rocket apparatus rescue, stranded vessel, tally board, light line, whip line, endless whip, petticoat buoy, traveller chair, traveller block, her majesty’s coast guard, harbour board, line thrower, line throwing, beach cart, hand barrow, sand anchor, hawser cutter, life jacket, faking board, irish hand barrow, government of victoria

1. 9 carat gold sovereign case belonging to 'Robert H. Baron'. Part of the Robert H. Baron, No.3596, and Cooper Collections. See Catalogue No. 1981P for details of R.H. Baron's service.1. Rose gold coloured hinged sovereign case. Circular in shape, interior has spring loaded clip for holding a sovereign. Catch and ring for a chain located on top. Owners initials engraved on front. Message to owner engraved on inside of lid. Outside front and back finely engraved. Hallmark on inside. 2. Brass coloured hinged sovereign case. Circular in shape. Pressed decoration and blank cartouch on front. Back plain. Dark felt lining inside lid. Interior has spring loaded clip for holding a sovereign. Catch and ring for a chain located on top.1. Hallmark stamped on inside and on inside of lid. '9.375'. Engraved on front: R.4.B. Engraved on inside: from Mother to Bob, Xmas, 1924.robert h. baron, cooper collection, sovereign case, accessory

HMAS BENDIGO (J187) was an Australian made "Corvette" which served throughout WW2 until 'paid off' on 27 September 1946. The Bendigo Military Museum also holds the last ensign of HMAS BENDIGO, it has a large number of auto graphs. We also hold the wooden crest and Battle Honours Board, this is on loan for 5 years. Refer to Cat 4546 Ensign.1. This is a medium size ships bell. It is cast from Brass. It has a protrusion on the top with a hole in it, used for mounting. The words HMAS BENDIGO 1941 are engraved into the side and painted black. The exterior surface has a few pits, but has been polished numerous times. The interior surface is rough cast, with a large quantity of dints, where it has been struck by the clapper. 2. This is the clapper. There is a steel hook under which is a weight of steel. Under that is a ring. Suspended from the bottom ring is the rope handle. This is an excellent example of navy rope work. At the top of it is a metal ring. Under that is a white and red stylised crown. Under the 'headband' of the crown is a white rope handle with blue inserts. At the bottom is a large rope "Ball" with numerous rope threads of about 180mm length.ww2, ran, hmas bendigo

Order of Australia Medal.This is full scale replica of an OAM It has a circular blue enamel ring in the centre. The word "Australia" is in the blue ring. The large gold section has a large quantity of replica gems. The top of the gold medal is a crown set with red and white enamel. A ring is above the crown. Attached to the ring is a brass loop 30mm long. Through the loop is a small piece of blue ribbon with gold wattle flowers printed on it. The medal is pinned to a piece of green cardboard.order of australia reproduction, aust awards

"D" handle, used to close a kit bag. The eyelets on the bag are threaded along the straight edge. It was then able to be locked using a padlock through the small ring area.Brass - "D" handle for kit bag.passchendaele barracks trust, brass handle

Item in the collection re “MAJ. JOHN BALSILLIE MBE” Refer to Cat No 118.5 for his service details, RSL and Council history.Brown leather Sam Browne Belt fitted with double clawed brass buckle. A brass stud and leather loop secured the free end of the belt tongue. The shoulder strap, 32 mm wide, is connected by a similar loop and brass stud arrangement. A pair of "D" shaped rings are mounted at the bottom of the belt (for the sword). The belt also has a flat brass hook mounted against the belt, between the “D” rings. The belt is double layered on the back and left side section.Stamped inside the shoulder strap are the letters "HQEC"uniform, ceremonial, maj john balsillie

The Heytesbury Settlement Scheme in the area west of Colac and bordering the Otway Ranges. The Settlement was established in 1960 as a dairying area and was one of the largest post World War Two farming settlements. This cow tag has been broken at the top and detached from the animal.The item is of some interest as coming from the Heytesbuty Settlement. Dairying is of major importance in the Warrnambool area and this extends to the Heytesbury area. These cow tags have now been superseded by more improved technological equipment. This is a brass cow tag. It is semi-circular with a ring top, broken or worn through at the top. ‘1292’ ‘Heytes East’ heytesbury settlement scheme, cow tag

There is no known history connected to this item. A spirit lamp was an essential household item in the 19th century and the first three decades of the 20th century until electric lighting became a common feature of most homes. This lamp has no particular significance and is suitable for display as an example of family life in the past.This is a spirit lamp with a milk glass base in two sections (two pedestals in rings). The bowl is made of green glass emulating the shape of the base. There is a brass section connecting the bowl to the wick holder with the wick exposed. There is a small knob or handle external to the bowl for controlling the wick’s use. The clear glass lamp mantle is slim-line bulbous shaped. history of warrnambool, social history, spirit lamp

Historically this item would have been used by gold miners, rabbit shooters, mobile "Rag and Bone" traders and other mobile(in caravans and/or horse drawn cart) traders of various small goods and haberdashery. Although marked as not to be used as trade, the isolation and sometimes difficult terrain rules out using larger and more delicate scales. In the early 1900s rough roads and severe weather conditions forced traders to be more flexible in trading with weights and measures. The "close enough is good enough" doctrine was the Australian outback rule of thumb.The significance of this item in the Kiewa Valley during this period demonstrates the slower acceptance of accurate trading measure using the country side principle "my hand shake is my bond". In the Kiewa Valley small quantity commercial undertakings e.g. gold mining, fur pelts and rabbit meat trade did not require bulk weight type scales. Commerce in rural production e.g. fruit and vegetables involved more farmers and their staff in a barter and/or "in kind" payments. This was more so in the depression years 1929 to late 1930s. Self sufficiency was to a large extent more attainable in this region than in the city/ large country town environment. The Australian "fair go" ethical approach to life and commerce was very much ingrained in those living in country regions, like Kiewa Valley as is demonstrated by the not so accurate hand balance, spring loaded scales.This brass "faced" portable Pocket Balance ( Fish Scales) has front plate made from thin pressed brass. The mild steel spring mechanism enclosed by black painted medium gauge steel cover( three quarters cylindrical). Front scale face and rear spring casing fastened by three rivets. Spring loaded marker blade is located in the centre of the front plate. A steel " finger holder" ring is attached at the top of the scale unit from one of two pre drilled holes. The top is for holding the scale upright and the bottom for a hook to dangle the item to be weighed from the bottom. See item KVHS 0223 for similar scales"THE BILLY BALANCE" and at the bottom "MADE IN GERMANY"antique pocket balance, scales, mobile weights, vintage appliances

This medal was issued in 1919 to members of the Armed Forces to celebrate the victory of the Allies in World War One. Australian Armed Forces members were issued with the medal produced in Great Britain. The medal was issued to Private A.E.Snell. Albert Edward Snell enlisted in World War One from Nullawarre. He was listed as aged 21, single and a labourer. He was at first in the 8th Battalion (7 Reinforcement Group) and embarked on the Wandilla in 1915 and later transferred to the 14th Battalion. He was wounded in action and returned to Australia in1917.This medal is of considerable significance, firstly as an example of the medal issued after World War One to Australian Armed Forces members and secondly because it was issued to Private A.E. Snell, a resident of Nullawarre, about 32 kilometres from Warrnambool.This is a circular brass medal with a laurel wreath and an inscription on the reverse side. The obverse side features a winged figure of victory with her left arm extended and holding a palm branch in her right hand. There is a metal ring at the top .There is text around the rim.THE GREAT WAR FOR CIVILISATION 1914-1919 2419 PTE. A.S.SNELL 8 BN A.I.F.victory medal, private a.e.snell, warrnambool

These medals were issued by the Town of Warrnambool in 1897 to commemorate the 60th anniversary of the reign of Queen Victoria of England. Walter John Hickford, the Mayor Warrnambool at that time, has his name on the medal. Walter Hickford (1855-1928) was a Warrnambool businessman, setting up a shop in Liebig Street in 1880, supplying the paint materials for householders, contactors, painters and artists. He also carried out decorative work in private homes, businesses and churches. Hickford was active in civic life in Warrnambool, serving as a Councillor from 1890 to 1903 and he was Mayor from 1895 to 1897.These medals are of considerable importance as they were produced for the Town of Warrnambool in 1897 to celebrate Queen Victoria’s Jubilee. They have both a local and a wider national significance.,1These two circular bronze medals have profiles of Queen Victoria as a young woman and as a crowned monarch on the reverse and the Warrnambool Coat of Arms on the obverse. Both have a punched hole with a metal ring on the top. .2 As above .3 These five circular medals, four of which are bronze and one brass are identical with those described above..1Queen Victoria 60th year of reign 1837 to 1897 obverse Town of Warrnambool W. J. Hickford Mayor .BY THESE WE FLOURISH Reverse .2 As above .3 As for .3 above Note one of the bronze ones has a fabric cord attached through a hole at the top.medals, queen victoria 60th anniversarry, warrnambool, mayor john hickford

This is a badge of an Australian association of fellmongers, wool sorters and scourers. This group may have been part of the Amalgamated Fellmongers, Wool Sorters and Wool Scourers Union of 1912-1918 or it may have been an earlier association. A fellmonger was a dealer in the hides or skins of animals, especially sheep, or a person who removed the skins from animals. There were several fellmongery and wool scouring establishments in 19th century Warrnambool and district. These included the Dallimore Fellmongery at Lake Gillear, the Bennett Merri Bank Fellmongery at Dennington and the fellmongery businesses of James Evenett and Henry Mawbey on the Merri River in South Warrnambool.Although it has no known local provenance, this badge is of interest because there were several fellmongery establishments in the Warrnambool district in the 19th century so it may have belonged to a local person.This medallion has a gold coloured image of a suspended lamb on a circular royal blue enamel background which in turn is surrounded by a white enamel annulus with text. The external brass edging is filigree. The medallion has an attached ring at the top with narrow gold ribbon threaded through an additional ring FELLMONGERS WOOL SORTERS & SCRS' . AUST. WOOLANDSKIN 82? G.P.O.PLACE W fellmongers, warrnambool history, dallimore fellmongery, bennett merri bank fellmongery, james evenett, henry mawbey

Although the medal is inscribed 'Warrnambool R C' we believe it to be a Warrnambool Bowling Club medal. The Warrnambool Bowls Club gave this medal to W&DHS in 1968 describing it as a medal won by life member William Kucks, club champion in 1895. Also newspaper reports show that William Kucks was the bowls club champion in 1895. No record has been found of William Kucks belonging to either rowing or rifle clubs. William Kucks was a long-time resident of Warrnambool, operating a boarding house in Timor Street in the 1860s and then a bakery in the same street for many years. He served as a town councilor 1899-1901.This badge is of considerable interest as a memento of a Warrnambool sporting club in the 1890s and of a well-known 19th century Warrnambool resident and town councilor 1899-1901.This brass star shaped medal has a circular centre with text surrounded by a raised narrow annulus and eight near triangular hollow shapes interspersed with small spheres. on the obverse, The reverse has a metal hook and clip. There is a ring attached to the tip of one of the triangles with a second ring through it. WARRNAMBOOL CHAMPION MEDAL R C1805 W Kucks warrnambool volunteer corps, william kucks, warrnambool bowling club

This Warrnambool Rowing Club medal was awarded to the winners of the Society Fours in 1908. The Friendly Society group that won the race was the Manchester Unity Independent Order of Odd Fellows, a benefit society owned by members who assist other members in times of illness or unemployment. Originally founded in Manchester, England, the M.U.I.O.O.F. started in Melbourne in 1840. The Warrnambool branch was founded in 1860. The Warrnmbool Rowing Club was established in 1873, though there had been several boat clubs associated with the Hopkins River going back to the 1850s. No information has been found on R.Russell. This medal is of interest as a memento of a Warrnambool sporting club award in 1908 and of the winner of the award, a Warrnambool group and a member of that group.This circular brass medal has a shield shaped centrepiece with text on both obverse and reverse surrounded by a plain annulus edged with small scrolls. It has a ring at the top.Obverse- W.R.C. Regatta 1908 Reverse SOCIETY FOURS Won by M.U.I.O.O.F.R RUSSELL. A maker's hallmark.warrnambool rowing club, the friendly society, m.u.i.o.o.f.

A plumb bob or plummet is a weight suspended from a string or rod and used as a vertical reference line or plumb line. It is the vertical equivalent of the water level. It is used to ensure constructions are plumb or level. It has been in use since Egyptian times and is also used in surveying. It is still in use today. This plumb bob weighs 910 grams and was probably used in the building trade. This item is retained as an interesting example of a trade tool from the past.This is a brass weight with a bulbous-shaped body rounded on the bottom, a slender neck and an enclosed top. The top has a metal ring to which is attached a metal rod with a ring at the end. The item is a little stained.building accessories, history of warrnambool

This is a pocket spring balance. It would have been used last century in our district by market gardeners, hawkers and other itinerant workers and possibly also used in some small businesses. In households it could also be useful for weighing jam fruit, vegetables etc. Spring balances are still in use today.This item is retained as an example of a spring balance manufactured 80 or more years ago.This is a set of spring balance scales. The spring is fixed at one end with a hook attached to hold an object to be weighed. The top end has a ring to hang the scales up. The spring mechanism is enclosed by a steel cover. The front scale face is made of brass and both this face and the rear spring casing are fastened by three rivets. On the front is a spring-loaded blade which has equally spaced scale markings next to it on one side. This item is much rusted. ‘Hughes Pocket Balance’ ‘Patent’ Scale Markings:- ‘0 to 25’ pocket spring balances, household items of the past., history of warrnambool

This instrument is an ear syringe that would have belonged either to a doctor or to a medical clinic or hospital. When it was first donated to the Warrnambool and District Historical Society in 1972 it was described as a throat syringe but this does not appear to be correct. This ear syringe, in our collection for 45 years, is a fine example of a medical instrument in use 100 years ago or more. It will be retained for display purposes and also for its aesthetic appeal.This is a brass ear syringe. It has a barrel with a plunger that is ridged at both ends and a handle with three rings for the user to enclose three fingers and a syringe tip tapering to a point. There is an oval brass plaque attached to the barrel and this contains information on the maker of the instrument and the maker’s crest. ‘Mayer & Meltzer, Makers, London’ ‘ To the University College Hospital’ ‘To the Hospital for Deseases (sic) of the Throat’ ‘To the Hospital for Women’ ‘To the Middlesex Hospital’medical instruments of the past, history of warrnambool

Scales such as these were used to measure commercial quantities possibly grains and farm produce for quite large amounts of product.Bags of the product would have been hooked up and weighed. Salter has been a name long associated with weights and measures. Salters had their beginnings in England in the 1760's with a background in springs which are a main component of many scales. The actual mechanism for weighing objects in such scales has remained similar for over two centuries.These scales would have been a common item in most commercial operations which bought and sold items in bulk and have historical and scientific significance.Cast iron frame with circular brass face painted black.. There is a round metal ring at the top which runs through a circular metal section of the frame. A hook is attached to the bottom of the frame through a similar metal circle. The brass face has graduated markings in 1 lbs increments up to 150 lbs. On top section of scale face:Salter's Spring Balance. British Made. On lower section of scales face:To weigh 150 lb. Salter trademark of rope and anchor. warrnambool, salter scales, commercial scales, spring balance scales

These badges are hat or cap badges used by the Royal Australian Air Force . These badges may date from before World War Two but the ones used today are of similar design. The basic design mirrors the equivalent design of the badges of the Royal Air Force of Britain. The Royal Australian Air Force was established in 1921 and is the second oldest Air Force in the world, being formed from the Australian Flying Corps which was established in 1912.These cap badges are of interest as early examples of those worn by members of the Royal Australian Air Force..1Bronze badge featuring a crown, a wreath of leaves and berries enclosing stylised RAAF. There are two small rings on the reverse each with a two pronged brass pin inserted in the rings. .2 Identical to .1 except the brass pins are missing. RAAF

The Australian Military Forces buttons were worn by Australian troops in World Wars One and Two. The Australian Commonwealth buttons date from the Edwardian era (1901-1910)These buttons are examples of the buttons used by the Australian Army. The attachment to a card is also an interesting example of the way members of the Warrnambool and District Historical Society mounted and displayed collection items in the 1960's and 1970's.Seven brass circular military buttons pressed into a rectangular piece of cardboard with pasted on lined paper on the back of the cardboard. Three of the buttons feature a raised map of Australia, a crown and text. Five buttons feature a raised intertwined E R,V11, a crown and text Protruding through the paper at the back is a section of a ring. The cardboard side has hand drawn blue lines, an oval stamp with text and hand written text. Three buttons have AUSTRALIAN MILITARY FORCES. Five buttons have AUSTRALIAN COMMONWEALTH FORCES Military medallion buttons ( hand written) Stamp is oval shaped with faded text of which only HISTORICAL DISTRICT and SOCIETY can be deciphered Three blue hand drawn lines to position the buttons. army, australian military forces, buttons, world war two, world war one

The tack hammer was used by Mrs K D Baird (Joy Coutts CPLC 1936) in the christening of the Minervan IV on the 11th April 1981, Boat Race morning. The christening is mentioned in Ring-a-roo October 1981 p.8The presentation of a christening hammer indicates the honour in which the owner was held by the school and also signifies the value placed by the school in both their rowing fleet and the people associated by name with the individual boats. Solid brass tack hammer with magnetic tips. Varnished wooden handle. Engraved head.Front of head: PRESENTED TO / MRS K D BAIRD / 11TH APRIL / 1981 Head verso: Minervan IV Maker's mark: GWMOUNT / PAT 282222joy-coutts, k-d-baird, ballarat-college, clarendon-presbyterian-ladies-college, minervan-iv, rowing, boats, christening, hammer,

Napkin rings for the Mess made of brass tubing (possibly a shell) in Coat of Arms on side commemorating famous battles of WW1.Gold napkin rings, home made of Brass. Possible made from a shell with emblem/Shield Commemorating a battle of WW1. 1. Emblem includes Coat of Arms and name of Amiens. 2. Emblem includes Coat of Arms and name of Bapaume. 3. Emblem includes Coat of Arms and name of Albert Town, Somme.1. Coat of Arms Amiens. 2. Coat of Arms Bapaume. 3. Coat of Arms Albert.passchendaele barracks trust, trench souvenirs

It appears that the badge has the wrong name spelling and should most likely be “HUTCHESON”. He was born in the Parish of Pine Grove, Wanurp District is in the same area. James Hutcheson had pre war training with the 4th LH at Mitiamo. Enlisted in the AIF 16.3.1916 age 33 years 5 months in the 1st Reinforcements 38th Bn, Embark for England 20.6.1916, disembark 10.8.1916, hospital with “Chill” 19.10.1916 then diagnosed with “Mumps”, rejoin unit 5.11.1916, embark for France 22.11.1916, Hospital 4.12.1916 with “Bronchitis” then finally “Tracheitis”, rejoin unit 2.3.1917, classed as Coy Driver 20.6.1917, WIA 27.7.1917 remaining on duty, embark for England 15.4.1919, embark for Australia 27.5.1919, discharged from the AIF 4.9.1919.Badge brass with central oval shape with image of a soldier, two flags at top each side has either a kangaroo or emu, under is a boomerang shape, ring at top for a chain/other.Rear, “Presented by Wanurp District League to Driver Jas Hutchinson for services rendered in the Great War 1914 - 1919”services rendered, wanurp, great war

Items collected by Albert Edward Corrie VX47191 2nd AIF. Refer Cat No 4847 for service history.1) medallion brass round shape with small ring at top. Face shows a human figure over a map of Australia. .2) medallion brass round shape showing Egyptian figures with one seated..1) one side, “1945, opposite, “Victory”.medallions, 1945 victory, eygyptian

This is a two part brass cylindrical object. The two pieces slide apart a small distance. This mechanism when operated removes a cap from the wick. On the side is a square, long section that holds a flint & string. On the tip of this section is a circular wheel with a serrated edge. When the inner section is slid down a little, the flame is shielded from the wind by the holes in the outer section. There is a ring mounted in the bottom., Engraved on one side are the letters CFA. Engraved on side of square section is "Patent 91 105107". On other side of square section are the words "Made in Austria". Pat 105107cigarette lighter, souvenir, smoking