Lists the work carried out by the SEC on tram No. 28. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 28

Lists the work carried out by the SEC on tram No. 31. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 31

Lists the work carried out by the SEC on tram No. 32. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 32

Lists the work carried out by the SEC on tram No. 33. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 33

Lists the work carried out by the SEC on tram No. 34. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 34

Lists the work carried out by the SEC on tram No. 35. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 35

Lists the work carried out by the SEC on tram No. 36. This tram was originally No. 15 purchased by the SEC in 1945. Number changed Sept. 1953. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 36, tram 15

Lists the work carried out by the SEC on tram No. 37. This tram was originally No. 22 purchased by the SEC in 1945. Number changed Sept. 1952. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 37, tram 22

Lists the work carried out by the SEC on tram No. 38. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with handwritten tram car number and work category, with handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 38

Lists the work carried out by the SEC on tram No. 39. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with handwritten tram car number and work category, with handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 39

Lists the work carried out by the SEC on tram No. 40. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with handwritten tram car number and work category, with handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 40

Lists the work carried out by the SEC on tram No. 42. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with handwritten tram car number and work category, with handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 42

Lists the work carried out by the SEC on tram No. 43. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with handwritten tram car number and work category, with handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, tram 43

Lists the work carried out by the SEC on the Scrubber (track cleaner) tram. This tram was created from ESCo 23 in 1934. Includes notes on the tram itself, body, brake gear, electrical, and truck. Demonstrates the SECV practice of maintaining records for the work on the tramcars in Ballarat.Foolscap ruled sheet with stamp tram car number and work category, typed or handwritten entries.tramways, tramcars, ballarat, sec, tramcar maintenance, records, scrubber

Drawing of Melbourne Electric Supply Co. Ltd (MESCo) Geelong tramways - "Combination Car Mounted Brill E1B Special Radiax Truck" - trams 16 to 23, built by Pengelley & Co in Adelaide 1924-25. Details the tramcar elevation with dimensions, and shows the towbars. Drawing dated Jan 1985, prepared for the TMSV. Scale 1/4"=1' Second drawing is titled "Elevations of body Pengelley tram Nos. 20-23" - based on MESCo drawing GE-T9-8358. Drawing dated Jan 1985, prepared for the TMSV. Scale 1/4"=1' Yields information about the Pengelley built tramcars for Geelong.Set of Drawings printed on light brown paper with brown ink - Drawing GE-T9-8350 and GE-T9-8358trams, tramways, geelong, drawings, pengelley

The penel was recovered by the restorer of MESCo/SECV Geelong tram No. 2 and provided information about the paint scheme and layout. The Geelong tramway system closed in March 1956, No. 2 making its last run in January 1956. The body was subsequently sold to Phil Shoppee, a farmer at Murradoc on the Bellarine Peninsula. The farmer had used the tram body as a feed store, with this part placed up against a water tank or similar. This prevented it from being painted over. The panel shows the methodology of securing it to the tram body and the location of the lining and the emblem. The SECV logo or emblem dates from the formation of the SECV in 1921. The panel dates from the 1950s, possibly from a repaint after the side entry gates on the car were replaced by hinged doors in the mid-1950s. See reference.Yields information about the location of the lining and logo on the tram body and colours. One of the few original SECV logos formed from gold leaf in the Museum's collection.Sheet steel - treated - SEC green paint with a gold leaf SECV logo or emblemtrams, tramways, geelong, tram 2, secv tramways, logos, secv, emblems

Gives details for each tram at that time, where from, date of purchase, New or second hand (all ), Straight or drop sill or drop centre, Body builder, Seating capacity, overall length, overall height, overall width, Lightning arrester, controller make and type, Truck Maker and type, type of truck, axle type, wheel diameters, wheel base, axle diameter, motors type and maker, Motor horsepower, Gear Teeth, Air compressor make and type, Brake Valves make and type, Governor make and type, Weight in tons and whether suitable for one man operation. Side list gives details of abbreviations, list of tram types and note on Birney 15. List of trams include "Cleaner Car". Undated. See item 3430 for Ballarat version and 8721 and 8722.Yields detailed information about Bendigo trams -c1964Dyeline print from a typed list.2nd copy has in ink "BTPS 613" in the top right hand corner.tramcars, bendigo, equipment, lists, data

A double deck horse drawn tram with single saloon. drop ends, stairs, longitudinal seats, sliding doors, wheels of cast iron, hand brakes - see notes. Originally built by Duncan & Fraser in 1887. Rebuilt by BTPS 1991. From the BTM Fleet page on the website: Built in 1887 by Duncan and Fraser for the Ballaarat Tramway Company Ltd. as a double-decked horse tramcar. One of eight cars which ran as trailers behind electric trams at times of heavy patronage, after takeover and conversion of the horse lines by the Electric Supply Company of Victoria Ltd. in 1905. Withdrawn in the late 1920's when the body shell became a residential outbuilding locally, until retrieved in 1985. Fully reconstructed to its original form and placed on a modified Melbourne saloon cable car truck. See attached notestrams, horse trams, tram 1

One of a few service vehicles built from almost new by the MMTB rather than being a converted vehicle. Donated to the BTM in 1999 and has been an operational tram 2001.Single truck (4 wheels), special purpose tram fitted with two cabs, control equipment, air brakes, track scrubber or cleaning equipment, pump, water and air lines to clean track. Carries approx. 4 cubic metres of water. The tram was built by the Melbourne and Metropolitan Tramways Board in 1934 using the cabs from a C class tram (No. 32). It was transported to the isolated Footscray system a number of times to clean the rails there. In 1961 it received additional body bracing and repainted in the diagonal black and string (light cream) stripes. The tram became 8W during 1975 as the then new Z class trams came into service. By the early 1990's the need for the tram and the other similar cars used to "scrub" the surface of the rails was no longer. The tram was stored at Malvern depot for many years before being donated to the Ballarat Tramway Museum by the Public Transport Commission in September 1999. It has been scrubbing the rails in Ballarat since March 2001. For a detailed article see April 2008 issue of Fares Please. Photo Warren Doubleday 20/9/2008 after painting completed See Destination CityMMTBtrams, scrubber tram

Yields information about a Australian Electric Traction Association tour to Ballarat, Golden Jubilee Tour, August 1955 and Ballarat tramcars.An 8 page, duplicated souvenir brochure for AETA tour of Ballarat Trams, on 20/8/55 with brief history, itinerary, map, tram car notes. Gives details of the itinerary for the trip using a 280HP Rail car trip with the forward portion via North Geelong. Duplicated using the Gestetner process. Note the knowledge of the time, with horse tram bodies being reused to form some of the early ESCo. trams. Second copy from donation of the Tom Murray Estate added 25-11-2016 and 3rd copy from Keith Kings papers added 19-3-2017. A copy of this document ex Charles Craig collection was replaced by a better condition one ex Tom Murray - 25-11-2016. Record revised and updated for this replacement. Handle with care - both copies.secv, ballarat tramways, 1955, 50 years of electric trams, aeta

Mechanical mobile car jack made by the TREWELLAH company of Trentham for APAC Industries Ltd. Known as a "Service Jack" used for servicing cars and light vehicles. Mounted on 4 wheels, two being castors. Painted red. On a brass plate fixed to top of body "APAC / Service Jack No. 247 / Range 4 5/8" to 19 3/4" / Capacity 5000 lb / Caution: Do not overload / This jack is guaranteed to raised 5000 lb / Overloading renders this guarantee null and void / lubricate jack thoroughly before using / always keep jack clean and well oiled / Manufactured in Australia / APAC Industries Limited. / South Australia"tools, automotive, servicing

The photograph of the Royal District Nursing Service (RDNS) Holden Torana vehicles was taken in the RDNS Headquarters car park at the rear of 452 St Kilda Road. These cars are part of the RDNS fleet, with others housed at RDNS Centres. The cars were used by the RDNS District nurses to visit patients in their own homes. This photograph depicts two door Holden Torana cars of 1972.Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state two were sold in 1922 and the others later. In 1922-23 three Peugeot cars were purchased and a woman Chauffeur, 'Miss Sword', was employed who lived in the Home and was also in charge of the garage. MDNS was expanding and a Motor Auxiliary was formed in 1929 to take the Trained nurses (Sisters) to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters, though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. Black and white photograph of 14, some partly hidden, new grey Holden Torana two door vehicles parked in two rows in the RDNS concrete based car park. The cars are parked with their front lights, grill, bumper bars and number plates facing the left of the photograph. The cars are seen side-on with the full side-on view of the two cars at the beginning of the rows seen in the foreground of the photograph. The flat bonnet is the same width as the rest of the body of the car; the windscreen slopes upward and joins the flat roof; there are two wiper blades resting at the base of the windscreen. In line, and at the level of the windscreen, a quarter window, and two windows divided by a narrow pillar can be seen running along the side of the car above the slightly convex body work and front door. The rear window slopes back from the roof and the slope continues on the upper bodywork of the boot lid. A metal strip runs along the side of the car about half way down the bodywork, and another runs just up from the beginning of the front wheel arch to the rear wheel arch; beside the front wheel arch is the word 'Torana'. The round, with capital letters 'RDNS', insignia can be seen on the upper centre of the front door of the two cars. The solid wheel caps have the Holden logo on them. The front grill which runs between the headlights on either side of the car, slopes slightly backwards from the central Holden badge. The bumper bar below this is metal. Black number plates with white written capital letters and numbers 'LFA - 208' and 'LFA - 207' are seen on two of the cars in the front row. The tops of two front seats with headrests and the top of a long back seat can be seen inside the car. A tall brick fence is seen running along the rear and right hand side of the car park. In the left background is a two storey building with a flat roof, and behind this on its left is a part of a tall building and to its right part of a bare tree can be seen. To the buildings right rear part of a house can be seen. In front and to the right of this is a three storey brick building, with the top two storeys seen above the car park fence. Multiple windows run along both levels of this building which has a tiled hip roof. The tops of some bushes are seen behind parts of the car park fence.Barry Sutton Photographer's Stamp Quote KX83rdns, royal district nursing service, rdns transport, rdns headquarters, rdns car park

This sepia digital image shows the Austin car which was donated to the Melbourne District Nursing Society (MDNS) in !937 by the Rotary Club of Victoria. It was used by the Matron of the MDNS District Division to visit patients weekly. The photograph is taken outside the MDNS Headquarters at 39 Victoria Parade, Collingwood. The photograph appeared along with an article in The Age Friday May 7, 1937. The photograph appeared in the MDNS Annual Report of 1937. On page 8, mention is made of J.D Johnston Esq, President of the Rotary Club of Victoria, presenting the Austin vehicle to MDNS. Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state two were sold in 1922 and the others later. In 1922-23 three Peugeot cars were purchased and a woman Chauffeur, 'Miss Sword', was employed who lived in the Home and was also in charge of the garage. MDNS was expanding and a Motor Auxiliary was formed in 1929 to take the Trained nurses (Sisters) to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters, though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. In the foreground of this sepia photograph is a side-on view of a four door 1937 style small grey car with a nose shaped bonnet, parked on the road beside the kerb with the headlight facing to the right of the photograph.The bonnet joins onto a straight windscreen which adjoins a slightly curved hood running back along the car. This adjoins a back window which joins onto the sloping rear body of the car with a small protruding boot. Windows are seen above the body work of both facing doors and a smaller sloping window above the body work and rear wheel arch. On the drivers door is a Maltese cross and the words "Melbourne District" written above the Maltese cross and "Nursing Society" below it. In front of this door the body work forms a wheel arch and the headlight is attached between this body work and the bonnet. Rubber tyred wheels with solid hub caps are seen below each wheel arch. On the footpath, behind the bonnet of the car, four Melbourne District Nursing Society (MDNS) Trained nurses (Sisters) are standing. They are wearing dark grey coats over their grey uniforms with white collars, and brimmed grey hats with a Maltese cross on the light coloured headband. The Sister on the right has her left hand gripping the handle on top of her oblong nursing case. A metal spiked fence is behind the Sisters, which runs to the left into one of the two square concrete columns which sit either side of a path. A hedge is behind the fence, and behind this part of a building with three arched windows can be seen. A white plaque is attached to the fence near one of the columns.mdns, melbourne district nursing society, rotary club of victoria, mdns transport, rdns, royal district nursing service, rdns transport

This white Toyota Corolla is one of the fleet of cars driven by Royal District Nursing Service (RDNS) Sisters to visit patients in the community to administer nursing care. 1985 was the centenary of the founding of the Melbourne District Nursing Society; founded in 1885; the Society was given Royal patronage in 1966 and became the Royal District Nursing Service. The Coat of Arms shown on the car was granted by the College of Arms in London in 1970. Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state two were sold in 1922 and the others later. In 1922-23 three Peugeot cars were purchased and a woman Chauffeur, 'Miss Sword', was employed who lived in the Home and was also in charge of the garage. MDNS was expanding and a Motor Auxiliary was formed in 1929 to take the Trained nurses (Sisters) to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters, though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. Coloured photograph of the side on view of a Royal District Nursing Service (RDNS).white Toyota Corolla sedan displaying the RDNS Coat of Arms on the upper centre of the front door. The car is the same width all over and the flat bonnet joins to a sloping large front windscreen. on the side, at the level of the windscreen are two windows, above the metal body work of both doors. The roof runs from the top of the windscreen to the rear of the vehicle where it joins with a short back window which sits above a short boot. Part of the front grill and headlights either side of it are seen, and a bumper bar below this. A black tyred wheel with solid hub cap is seen under a wheel arch in the body work, at the front and rear of the vehicle.melbourne district nursing society, mdns, royal district nursing service, rdns, rdns crest, rdns transport

The EK was the first model Holden that had the option of automatic transmission. This was the 3 speed hydra-matic that offered performance and economy that was not far short of the manual. This vehicle still used the tried and true 138 cubic inch power plant.This was a local Trafalgar vehicle formerly owned by Graham Cook and family. The interior of this vehicle is totally original while the exterior has undergone a substantial repaint and re-chrome, This was required because the previous owner kept the external spotlessly clean and wore the paint out.Blue body sedan with white roof ,sun visor, upright rear vision mirrors added on .Hub caps featured lion emblem. Chrome arrow shape ornament on bonnet.Holden Special Registered number 63453-Hvehicle, holden, 1961, car

1200 cars made by Holden dealer team. 500 had to be sold to conform to Confederation of Australian Motor Sports (CMAS)Designed by Peter BrockDesigned as a racing car, built and sold by HoldenRed bodied four door sedan with sunroof air deflector on boot lid alloy wheels deflector fins front mudguards both sides, bonnet scoop.Both front mudguards, SS Group Three Peter Brock as well as on boot lidvehicle, ss group three, commodore

It was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). Although the Controlled Coupling Hydramatic used in the EH was actually a four speed, it effectively worked as a three speed unit except at full throttle. The 179 ci (2900cc) engine was initially only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box was called the "EH-S4", fitted with an up-graded manual gear box, with stronger gears than the 149ci gear box and an up-graded clutch. The three-speed manual (column shift) gear boxes had no synchromesh on first only second and third 'top gear'It was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). Although the Controlled Coupling Hydramatic used in the EH was actually a four speed, it effectively worked as a three speed unit except at full throttle. The 179 ci (2900cc) engine was initially only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box was called the "EH-S4", fitted with an up-graded manual gear box, with stronger gears than the 149ci gear box and an up-graded clutch. The three-speed manual (column shift) gear boxes had no synchromesh on first only second and third 'top gear'Two tone, blue body and white roofon the boot of this car there is a 179 badge stating that this car was powered by the larger motor available. There was also a "Hydra-matic" badge showing this vehicle was fitted with an automatic transmission. Registered number 63454-Hholden, 1963 - 1965, car

Drawing - A3 photocopy of the "Comeng (Vic) Pty Ltd - Dandenong Plant", showing the layout of the various buildings and Trackwork for the construction of tramcars and other railway rolling stock. Shows the various building numbers but no description of which building is used for what purpose. Shows a double ended tram testing track with two loops, probably at the time of the construction of the Hong Kong cars. Possibly produced for an AETA or similar body tour of the plant, c1985 The Google Earth view, accessed at the time of cataloguing shows that these loops no longer exist, but the tram testing track is still in position.trams, tramways, comeng, commonwealth engineering, tramcar manufacture, hong kong, tramcar construction

The FJ came along after five years of producing the 48-215 (FX) and was basically the same car with a few minor alterations to the body. Minor alterations introduced that year. The vertical grille was replaced by an elegant finned and detailed version, and the new chrome cone shaped hubcaps looked the part. There were new bright metal body decorations, 5.90 x 15 tyres, new bumpers and wonderful new chrome fins placed on the rear mudguards. And at last the Holden could be seriously optioned. For example, the 'Special' featured armrests, deluxe leather seat trim, front door courtesy switches, chrome instrument surrounds, black knobs with chrome inserts, dash facia grille extending to the glovebox, rear passenger assist straps, window winders, a cigarette lighter and (for the first time) came in a two-tone finish. The first Holden to be exported to New Zealand, 327 were shipped.Has two tone grey finish , four door sedan, tail fin mounted reflectors on each rear mud guard.Holden specialvehicle, holden, 1953, car