Leather-bound certificates for the degree of M.B. (Bachelor of Medicine) for studies of S. Albert Bush, University of Melbourne. Three third year certificates signed; remainder incomplete and unsigned. Note: Last page relating to certificates for extra three months (Hospital Surgical Practice) BUT these are unsigned. Inscriptions: 'University of Melbourne Certificates for the Degree of M.B. S. Albert Bush'.organization, education, university of , university of melb.

The photograph was taken after 1910 when the chapel, on the left, was built.This is a rare photograph of the Central Institute built in 1907 replaced by the Flinders Street Institute in 1917. The two buildings coexisted for many years until the this one was demolished (date still unknown).Small monochrome photograph at 45 degree angle depicting a horse carriage passing in front of the Siddeley Street mission, known as the Central Seamen Institute.In pencil: 137seamen institute, siddeley street, brick, huddard company, australian wharf, horse carriage, smoke, flag, chapel, walter richmond butler (1864–1949), goldsmith album

Mounted colour photograph of a 360 degree panoramic view of the University of Ballarat Arts Academy (later Federation University). .1) Daylight .2) Nightterry kelly, arts academy, camp street, ballarat, alfred deakin place

Sash was worn at all meetings except where the program made it in impractical.MGC009.1 Deputy Chief Ray gold Sash with gold fringed ends and "D.C.R." in satin stitch inside royal blue stem-stitched circle. 1st Degree circle, 2nd Degree star, 3rd Degree cross and crown gold metal symbols. MGC009.2 Deputy Chief Ray gold Sash with gold fringed ends and "D.C.R." in gold satin stitch on a royal blue appliqued ivy leaf. 2nd Degree star, 3rd Degree cross and gold metal crown above. This sash does not confirm to the standard outlined in the Methodist Girls' Comradeship Constitution. MGC009.3 Deputy Chief Ray gold Sash with gold fringed ends and "D.C.R." in blue satin stitch in a satin stitch ivy leaf. 1st Degree circle and crown metallic insignia. Felt. MGC009.4 Deputy Chief Ray gold Sash with gold fringed ends and "A.D.C.R." in teal blue satin stitch. 1st Degree circle and crown insignia. Felt. This sash does not confirm to the standard outlined in the Methodist Girls' Comradeship Constitution. MGC009.5 Deputy Chief Ray gold Sash with gold fringed ends and "DCR" in blue satin stitch. Satin. Crown insignia. This sash does not confirm to the standard outlined in the Methodist Girls' Comradeship Constitution. MGC009.6 Deputy Chief Ray gold sash with gold fringed ends and "DCR" in blue satin stitch. Felt. The sash has a gold satin Social badge [S] in a blue felt square under the DCR letters. methodist girls' comradship rays section

This book looks at the earliest years of contact between Aborigines and Europeans in the Melbourne area. The contact period saw the Wurundjerei-willam resisting, coping with and adapting to a new and alien culture. A degree of mutual respect seems to have existed, at least for a short time, of each other?s intentions. It appears that the settlement at Port Phillip did not encounter the degree of violence seen elsewhere.maps, b&w illustrations, colourwoiwurung, woi wurrung, wurundjeri, wurundjeri willam, merri merri, william thomas,

Galvanised metal folding stove with numerous ventilation holes. One side folds outwards 90 degrees to form the stove. Hexamine tablets used to fuel.military equipment - army, domestic items - cooking, hexamine, stoves

A window sash is a type of moveable window frame that can slide, usually vertically. Unlike a window frame built into the wall, a sash allows glass window panes to slide up and down. The sashes fit inside a track that runs along another window frame attached to the house. Lead weights traditionally counterbalanced sashes, but today they are counterbalanced by springs. The traditional sash window is double-hung; this means it has two sashes that can both slide along a vertical track. However, some sash windows have a single moveable sash, and sashes may slide horizontally. A sash usually contains panels of glass, called lights. The lights are traditionally held together by a grid of bars. The sash window was developed in 17th century England and allowed for greater airflow. The sash window has had a significant impact on western architecture, used in nearly every style of English domestic architecture since the late 17th century. The subject item is a template used by the carpenter to mark or scribe the vertical track in which to window will slide up and down.An item used when sash windows were made by hand from the 17th to the early 20th century. The template allowed the carpenter to mark accurately a channel that was then planed and the Mitre to join the bars.Wooden Ovalo sash template with two screws each side. It has slot along length and has 45 degree bevelled edge each end.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wooden ovalo sash template, ovalo sash template, template, sash template, sash templet, window sash, tool

Black and white photo: image shows farm gate fully tilted at approx. 50 degrees from hinged end. Links to previous images of gate.bendigo, industry, abbott supply, abbott supply, farm, gate

Black and white photo: image shows gate tilted upwards at angle of approx. 45 degree. Appears to show progression of operation in images 2403.23 to 24.3.25.bendigo, industry, abbott supply, abbott supply, gate, farm

One of a group of slides taken by members of the Society of built heritage in Kew in 1979-80. The selection of subject matter reflects the priorities of the period. The colour of some slides has degraded.The slides represent a snapshot in time of built architecture in Kew, much of which has changed in the forty-plus period since they were created. 35mm colour transparency (slide) taken from a photograph of the facade of South Esk (Ordsall). The photo was developed in 1980. There is a high degree of colour distortion in the transparency.victorian architecture, south esk -- cotham road -- kew (vic.), ordsall

One of a group of slides taken by members of the Society of built heritage in Kew in 1979-80. The selection of subject matter reflects the priorities of the period. The colour of some slides has degraded.The slides represent a snapshot in time of built architecture in Kew, much of which has changed in the forty-plus period since they were created. 35mm colour transparency (slide) taken from a photograph of the portico of South Esk (Ordsall). The photo was developed in 1980. There is a high degree of colour distortion in the transparency.victorian architecture, south esk -- cotham road -- kew (vic.), ordsall

John Hastie Engineer and millwright John Hastie opened small manufacturing works in Greenock in 1845 and 1853 patented the first self-holding steering gear. The firm became known as John, Hastie and Co. Ltd. in 1898 after taking on limited liability status and their main works were at Kilblain Street, Greenock, where they specialised in ships' steering gear. The company also occupied works at Rue End Street, Greenock. Plans of this unit depict a stockyard to the east, with areas for welding; fitting and assembly; flame, cutting and fabrication; and a machine bay. The company was dissolved in 1991. Brown Brothers Brown Bros Rosebank Ironworks made the steering gears for many large ship's, including The Titanic. Andrew Betts Brown the founder was born in 1741 and closely associated with many improvements in marine engineering. He was educated in his native city and served his apprenticeship as an engineer in the locomotive works of the North British Railway Company at St. Margaret's. During his apprenticeship, he attended the evening classes at Watt College. subsequently going to Manchester to study chemistry. He went to London around 1863 and took over an old brewery, which he converted into an engineering works. During his time there he invented an overhead travelling crane, which was used on the construction of Blackfriars Bridge London. He went on to develop plant which used steam and hydraulic power for discharging ships as a result the company was contracted to install this equipment in Hamburg Docks. ​ By around 1870 he continued to construct machinery in London but realised that conditions were more favourable in Edinburgh. He acquired land at Rosebank adjoining the North British Railway Company's line to Granton, and the necessary infrastructure was completed allowing him to finish the Hamburg contract. The works at Rosebank were eventually extended and added to until they became one of the largest engineering works in the East of Scotland. ​ Mr Brown was a member of numerous engineering institutions, the best known at the time being the Institution of Naval Architects. He was also a Fellow of the Royal Society of Edinburgh, a member of the Institute of Mechanical Engineers and of the Institution of Marine Engineers he died in 1906 at the age of 67.An item made by two marine innovators of marine auxiliary machinery and itemsShip's wheel, brass, attached to brass pillar. Base has 6 holes in it for securing it in place.. Top of ship's wheel pillar has a brass, adjustable, arrow pointer that is positioned over a dial etched into the flat brass surface. The dial reads " PORT STABD". Lines and degrees are marked, with '0' in centre and every 5 degrees, from 0-35, in both Port and Starboard sidesInscription to wheel hub "Brown Brothers & Co. Ltd, Rosebank Ironworks, Edinburgh"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, john hastie, john hastie, andrew betts brown, ships wheel, ship steering gear, marine equipment

George Sutherland Mackay came to Warrnambool in 1891 and in 1893 joined his practice with that of James Fletcher and the firm became known as Mackay and Fletcher later changed to Mackay and Taylor. G S Mackay served for a long time on the Warrnambool City Council including 4 terms as Mayor. He was also an active member of the Presbyterian Church and worked to establish the Warrnambool Agricultural High School. He built the offices which still stand at 131 Kepler Street. He died in 1926. The firm celebrated its centenary in 1993.A commonly used office item which is well linked to both a long established business in Warrnambool and G. S. Mackay who contributed greatly to the community of Warrnambool and district. Cast iron painted black with rounded rectangular base. Circular seal and shaped handle which moves down 45 degrees. Trimmed with worn gold paint. Excelsior in gold on the front. The oval seal reads G. S. Mackay Warrnambool solicitor.warrnambool, g s mackay, mackay & taylor, mackay solicitor, company seal

Two photographs of Richard Jones , MD. 1, A side profile, sitting in a chair, reading a paper. 2, A 45 degree profile looking at the camera and holing the paper.Alice Mills , Melbourneperson, individual, richard jones, richard jones

Collection of mixed spanners, 24 individual spanners and one joined set of five spanners. Spanners in various degrees of maintenance. Stored in Pittock Coachbuilder's box, reference 1300.1

Martin Crane was the first Bishop of Sandhurst. 1874 - 1901. The knife was probably a gift and is engraved on the front with his name. Martin Crane was a progressive leader in Sandhurst and built many new schools and churches in the Diocese. The knife is significant because it belonged to the first Bishop of Sandhurst, Martin Crane. Irish born Crane was an Augustinian priest before being ordained in 1874. Crane was Bishop of Sandhurst for 27 years. Elaborately engraved sterling silver knife. Floral, leafy design. Probably a cheese or butter knife. The handle sits 90 degrees to the knife blade. This a part of a cutlery set. Bishop. M. Crane. Engraved on the front of knife. Silversmith's name/symbol engraved on the back of knife blade. Sterling. P??? engraved on the back of knife blade. knife, silverplate, cutlery, catholic clergy

Lists languages under areas and language classification; records location, previous research, degree of urgency of research and assessment of total linguistic knowledge; index of variant language names.Mapslinguistics

Yellow cotton shield with dark blue and light blue cross. Green collar. Blue felt Degree of Sincerity emblem at intersection of cross. Commander emblem in left quadrant.methodist order of knights

Black covered book, 145 pages, 'RITUAL' Ritual of the First, Second, and Third degrees, Charges and Lectures. Printed by Mason, Firth & McCutcheon Pty Ltd. Melbourne. 1949.Printed by, Mason, Firth & McCutcheon Pty., Ltd., Melbourneclubs, social, united grand lodge of antient, free

One of a group of slides taken by members of the Society of built heritage in Kew in 1979-80. The selection of subject matter reflects the priorities of the period. The colour of some slides has degraded.The slides represent a snapshot in time of built architecture in Kew, much of which has changed in the forty-plus period since they were created. 35mm colour transparency (slide) taken from a photograph of a section of the ballroom ceiling of South Esk (Ordsall). The photo was developed in 1980. There is a high degree of colour distortion in the transparency.victorian architecture, victorian interior decoration, south esk -- cotham road -- kew (vic.), ordsall, murals

One of a group of slides taken by members of the Society of built heritage in Kew in 1979-80. The selection of subject matter reflects the priorities of the period. The colour of some slides has degraded.The slides represent a snapshot in time of built architecture in Kew, much of which has changed in the forty-plus period since they were created. 35mm colour transparency (slide) taken from a photograph of a section of the mural in the ballroom of South Esk (Ordsall). The photo was developed in 1980. There is a high degree of colour distortion in the transparency.victorian architecture, south esk -- cotham road -- kew (vic.), ordsall, murals, victorian interior decoration

This model clinometer used in both WW1 and WW2 for checking artilllery and mortar barrel anglesPrecision instrument widely used by Alliied forces in two warsMetal with some parts painted black. Device comprises a segment of a circle with an adjustable radial arm with bubble level on a slide attached"Clinometer Field Mark VI No. A.221" Noblet and Forrest 1941" "Direction of Target" with arrow. "Use this Base for 0° - 45°" "45° - 90° Target" with arrow Circle segment graduated with 0 - 44 degrees on side, 45 - 89 degrees other side. Arm graduated 0 - 60 minutes both sides clinometer, artillery instruments

An octant is an astronomical instrument used in measuring the angles of heavenly bodies such as the sun, moon and stars at sea in relation to the horizon. This measurement could then be used to calculate the altitude of the body measured, and then the latitude at sea could also be calculated. The angle of the arms of an octant is 45 degrees, or 1/8 of a circle, which gives the instrument its name. Two men independently developed the octant around 1730: John Hadley (1682–1744), an English mathematician, and Thomas Godfrey (1704–1749), a glazier in Philadelphia. While both have a legitimate and equal claim to the invention, Hadley generally gets the greater share of the credit. This reflects the central role that London and the Royal Society played in the history of scientific instruments in the eighteenth and nineteenth century's. There were also two others who are attributed to having created octanes during this period, Caleb Smith, an English insurance broker with a strong interest in astronomy (in 1734), and Jean-Paul Fouchy, a mathematics professor and astronomer in France (in 1732) In 1767 the first edition of the Nautical Almanac tabulated lunar distances, enabling navigators to find the current time from the angle between the sun and the moon. This angle is sometimes larger than 90°, and thus not possible to measure with an octant. For that reason, Admiral John Campbell, who conducted shipboard experiments with the lunar distance method, suggested a larger instrument and the sextant was developed. From that time onward, the sextant was the instrument that experienced significant development and improvements and was the instrument of choice for naval navigators. The octant continued to be produced well into the 19th century, though it was generally a less accurate and less expensive instrument. The lower price of the octant, including versions without a telescope, made it a practical instrument for ships in the merchant and fishing fleets. One common practice among navigators up to the late nineteenth century was to use both a sextant and an octant. The sextant was used with great care and only for lunar sightings while the octant was used for routine meridional altitude measurements of the sun every day. This protected the very accurate and pricier sextant while using the more affordable octant for general use where it performs well. The invention of the octant was a significant step in providing accuracy of a sailors latitude position at sea and his vessels distance from land when taking sightings of land-based landmarks.Octant with metal handle, three different colored shades are attached, in wooden wedge-shaped box lined with green felt. Key is attached. Two telescope eyepieces are in box. Some parts are missing. Oval ink stamp inside lid of box, scale is graduated to 45 degrees. Ink stamp inside lid of box "SHIPLOVERS SOCIETY OF VICTORIA. LIBRARY"instrument, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, octant, navigation, nautical instrument, navigation instrument, john hadley, sextant, astronomical instrument

This item is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a metal tool with a curved centre section and two hollow pieces at the ends acting as handles. The blade for planing is curved and the degree of the curving can be changed by the adjustment of two metal screws. vintage tools, henry phillips, warrnambool