Wooden case or cover for hand operated sewing machine. Has silver metal carrying handle, metal locking key with plastic tie attached and removable accessories drawer incorporated in case containing various tools. Sewing machine is a Pfaff attached to a wooden board.Martha Weller (in case) Weller (on accessories box)pfaff sewing machine, portable sewing machines

Hand operated pressure pump with water reservoir. High and low pressure hoses. Low pressure for filling reservoir, high pressure reinforced hose for delivering water to item to be pressurised. Brass fittings. Reservoir painted pale green and operating handle yellow & red.

The Raywood Borough was created on 17 January 1865 and was united into Marong Shire on 1 October 1915. In 1994 . In 1994 the City of Greater Bendigo was created from the amalgamation of the former City of Bendigo with the Borough of Eaglehawk, Shire of Strathfieldsaye, Shire of Huntly and parts of the Rural City of Marong and Shire of McIvor. It now includes the towns of Axedale, Elmore, Heathcote, Marong, Raywood and StrathfieldsayeDecorated hand operated cast iron embosser with 35mm stamp head attached. Gold and maroon painted decorations extend from top edge of handle including scrolls and roses. Well used showing all over signs of wear. Stamp is for the Borough of Raywood.Borough/ Raywood / Victoria / 1865borough of raywood

Used in shops and businesses in Australia prior to decimal currency being introduced in 1963.A Victor hand-operated adding machine covered in brown plastic trim. It has a lever on the right hand side which turns. Has eight columns of numbers with 1 - 11 on the right hand column and 1-9 on six columns and 1 only on one column.A gold VICTOR label on the front. adding-machine pre-decimal-currency

Cutting from The Sanitary Age, dated September 7, 1934. Cutting is pasted on an exercise book page. Article has an illustration of a household installation of a Scale Buoy and a Hand-operated Scale Buoy. It also mentions how the Scale Buoy works and the benefits of using them.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, the sanitary age, canadian national exhibition, scalebuoys

This mincer was donated to the Slab Hut (Visitor Information Centre) as a display item.This domestic kitchen appliance is typical of the period when food processing was done at home. It would have been before the time of mass food processing factories.A cast iron food mincer with a wooden handle. It has a funnel shaped cup at the top through which the pieces of meat are pushed to come out of the side. The wooden handle is turned to help this action. It has one blade. The mincer clamps to a flat surface by a hand operated vice/screw. MODEL No 2food-preparation mincer appliance kitchen domestic

Hand-operated toy sewing machine has red metal base with name inscribed in gold; creamy-white plastic body has a gold scroll decoration with 5 red spots. The operating wheel is silver metal with a black knob on the handle. The working parts are silver-coloured metal.Little Bettylittle betty, allansford, toys, sewing machines

Hand operated washing machine. Works on same principal as our model on display. Made of a metal drum with supporting metal legs. It includes a metal handle with an agitator. A piece of wood is bolted to the side of the washing machine for mounting a hand wringer. Such a machine was ideal for homes that did not have electricity.

Eduard Lehman, Zurich Switzerland patented a metal barrel shaped hand washing machine with a hand crank to operate a metal plunger in 1919. Such hand washing machines were used by settlers in Moorabbin Shire An 83 year old Visitor on site remembers using this type of washing machine. He had to push the agitator for 5 minutes. Prior to his mother buying the washer, all laundry was hand washed in troughs.Such hand washing machines greatly reduced the workload of the women of pioneer familes in Moorabbin ShireThis hand washing machine c1919 consists of a metal barrel, standing on 4 legs, and has a hand crank to operate a cone shaped metal agitator.THE / LEHMAN/ COMPRESSED AIR AND / VACUUM WASHING MACHINE / Pat. No. 50614/30lehman eduard, hand washing machines, laundry equipment, pioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham

This image shows a sealed road running along South Road, although with a wide gravel shoulder. The railway crossing gates were hand operated. This image is one of many in the collections that focuses on the railway. The development of the railway was crucial to the ongoing development of the area. Community life often sprang up along and beside the railway.Black and white photograph of the railway crossing at South Road, Moorabbin, viewed from Nepean Highway. Handwritten in blue ink on reverse: 217 Handwritten in red ink on reverse: 80%moorabbin, railway, railway crossing

The office of the Public Trustee was constituted and incorporated by the Public Trustee Act 1939 which was amended by the Public Trustee Act 1940. The Public Trustee was the successor in law of the Curator of the Estates of Deceased Persons The Public Trustee was empowered to act as administrator, trustee, executor and attorney. On 1 July 1994, State Trustees succeeded the Office of the Public Trustee as Victoria's first State owned company under the State Trustees (State Owned Company) Act 1994. (https://prov.vic.gov.au/archive/VF50). Decorated hand operated cast iron embosser with 35mm stamp head still attached. Gold and maroon painted decorations extend from top edge of handle including scrolls and cross hatching. Well used showing all over signs of wear. Stamp head is for the Public Trustees Kangaroo Flat.Public / Trustees / Kangaroo / Flat

This small Adana letterpress was based on a larger press. It was intended for printing stationery such as business cards, visitor’s cards, shop price cards and notepaper headers, Used for letterpress printing, and advertised as “Virtually indestructible”. Used for hobby printing, schools, and similar uses. When donated to Flagstaff Hill the chase still had letter type in it, which was printed out "THE SHADOWS / apahc / the aauage / shaboogie ". Currently, the machine is used by the Flagstaff Hill "Examiner" office to make business cards for use by some of the Volunteers in the Village. HISTORY Donald Aspinall, born in London in 1899, suffered shell shock while serving in World War 1. During his recovery, while still a teenager, he worked his hobby, the design of a small flatbed printing press, then advertised it in The Model Engineer’ in 1918 and received an overwhelming response of orders. In 1922 Aspinall founded the Adana Agency, in Twickenham. His had great success in his sales of flatbed, self-inking wooden presses to hobby printing enthusiasts. Over the years Adana made a variety of machines; flatbed, lever, treadle and powered presses Adana cast its own type in 1925 and has a number of patents for press parts. In the 1980’s the company wound down, and was purchased by Caslon, who still service and supply part for the Adana machines. Printing press; hand operated small letterpress machine made by Adana. Tiny platen style. Model Five-Three (5 inch x 3 inch). Cast metal base and lever handle with rounded end, both painted dark red, rounded red metal lever handle. C. 1934 Marks on foot of stand " REG. NO. / ISIL 46 & S00575 / PATENTS PENDING" and "REG. TRADE MARK / ADANA"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, adana letterpress, adana model three-five, mini letterpress, printing machine, donald aspinall

Press metal hand-operated press base with 2 round pressing surfaces and large curved lever. Stamp is marked with "Warrnambool Harbour Board" and depicts graphic of lighthouse, boat and sun. In working condition. Has separate wooden base of rectangular shape and tall wooden box lid with key and 2 key holes.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, press, warrnambool harbour board

Wagon, four wheeled fully sprung with tail board, railing on each side plus hand operated brake on rims of rear wheels. Wooden frame, metal turntable and single shalves. Double chain for harness attached to wooden tail piece. Metal rimmed wheels. Wagon once belonged to S.J. Bell, Wangoom"S J Bell Wangoom"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cart, wagon, horse drawn vehicle

A hand-operated maize planted used in the maize industry, possibly used prior tothe introduction of larger horse-drawn planters which could plant two rows at a time. Associated with the large maize growing industry in the Orbost region 1880s - 1950s.A metal and wooden maize planter, a square seed reservoir, wooden handle on the top, a swing door at the bottom which is manouvered by two wires connected to the door.maize-corn-planter agricultural-implement

p34 'Old Farm Machinery in Australia' Society Ref.Horse drawn, hand operated Spring Tyne Orchard Cultivator. It can be paired with a similar cultivator. Has 7 tynes one disc at rear both adjustable. Depth of tyne into soil controlled by levers for light scratching to deep. The weight per tooth was 1/2 that of ordinary English harrow. Useful for rough stony ground.'Harvey' - on rear disc adjuster pivot.rural industry, orcharding

Yields information about SEC Ballarat Welding truck fitted with a trolley pole.Colour slides, Kodak white cardboard mount, developed Dec 1969 of the SEC Ford Welding truck, complete with Trolley Pole in the Power Station yard. Welder, weld Note the hand vice on the front bumper bar and the hand operated turn and stop signal device. See Reg Item 2864 for a view of this truck at work.ballarat, tramways, trams, sec, trackwork, welding

Bridgewater is a situated 39km northwest of Bendigo and 170 km from Melbourne. It was established as a crossing point over the Loddon River for gold diggers en route to the Inglewood gold diggings. As gold began to dry up in the district the town of Bridgewater developed due to its proximity to the river which it relied on for industries such as brewing, farming and market gardens. As demand on the water supply grew, the Water Works were established to ensure supply and manage the quality of the water for drinking. Decorated hand operated cast iron embosser with 40mm seal head attached. Gold and orange painted decorations extend from top edge of handle to sides of base. Original knob has been replace with a newer wooden knob. Well used showing all over signs of wear. Seal is for the Bridgewater Waterworks Trust 1927.Bridgewater Waterworks Trust 1927.loddon shire

This drill once belonged to Goodall and Sons, who were blacksmiths in Terang. The smith was called upon to do a variety of work. In the early 1900s he was often the nearest person to be able to perform an engineer’s services for many miles around. The Dawn Ball-bearing Post Drill no. 611 is described in McPherson’s Catalogue as a “drilling machine with adjustable automatic feed, with improved Dawn coupler and ball-bearing thrust’. The heavy design of the flywheel enables it to maintain momentum” and is “fitted with pulleys for belt drive if desired” The hand crank drives an automatic feed to work off a cam-follow system opposite a large wheel. Made by Dawn Manufacturing Co. Australia 1920-1950. DAWN MANUFACTURING CO. Dawn Manufacturing Co. was founded in Coburg, Melbourne, in 1917 by the four Blake brothers, who were all engineers. After World War I Dawn was supplying drills Australia wide and the company was growing at a healthy rate. During the depression they remained busy, with employees working 60-80 hour weeks. Dawn was contracted to supply vices and clamps to the Australian Defence Department and munitions factory during the World War II. In 1959 the company was taken over by G.N. Raymond Group, then in 1973 the Siddons Ramset Limited acquired Dawn. In December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. In November 1998 Dawn became 100 per cent Australian owned. HENRY GOODALL & SONS Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The drill is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the 1920s-1950s.Dawn Ball-bearing Post Drill no. 611, made by Dawn of Melbourne, model no 611. Hand operated drill press. Self-feeding blacksmiths’ drill-press. This drill once belonged to Harry Goodall & Sons, blacksmiths of Terang. Dated 1920s-1950s. Gear ratio 2:1 main drive, 6" diam, 3:1 reduction gear. "Dawn", "Melbourne"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, terang 1900s, warrnambool district 1900s, post drill, blacksmith’s drill, dawn post drill, dawn ball-bearing post drill no. 611, blacksmiths, dawn of melbourne

Sewing machine, Singer, hand operated by crank handle, rounded wood case with lock on one side. Machine has hinges at back and recessed accessory compartment containing pins and needles. Machine has shuttle bobbin. Singer Trade Marks gold transfers on lid and machine, with Singer badge on front of machine. Serial Number "F1841984" on front right. Serial Number "F1841984" on front rightflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, singer, singer sewing machine, dressmaker, taylor, domestic machines

Frister and Rossman sewing machine. Serial No 050811; vibrating shuttle. For decades Fricher and Rossman were the largest producers of sewing machines in Germany. By 1903 the factory had produced over one million machines. This machine manufactured c1900. Hand operated. Housed in ornate wooden cabinet. Table top model. .1 Machine .2 Cover .3 ShuttleFrister and Rossmandomestic items, sewing

Blackburn Railway station opened on 25/12/1882 but was not staffed and the crossing was not manned. The station opened as ac staff and ticket station on 12/8/1889 with hand operated gates.Automatic signalling was introduced on 13/7/1958.Coloured photograph of the Blackburn Road railway crossing at Blackburn, looking east towards Ringwood - 2012blackburn road, blackburn, blackburn railway crossing

Metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Exterior casing of a black painted metal railway signal lamp with circular blue and red glass filters and a turning mechanism on the top under a circular handle. Small copper plate with the letters "A y" stamped on it, on one side of the lamp. "A y"railway lamps, signalling lamp, train signal lamps

Metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Black painted metal signal lamp with a circular metal cover over a clear glass disk at the front and an elongated oval shaped handle at the back. The circular metal cover has a vertical slit in it. There is an inscription on the top of the lamp with the date 1917 and the company name "Eli Griffiths & Sons, Birmingham"."ELI GRIFFITHS & SONS / 1917 / BIRMINGHAM"railway lamps, signalling lamp, train signal lamps, railway equipment

F. M. Brown & Co were a foundry located (in 1892) on the corners of Creek and High Street in Bendigo. This embosser was manufactured by them for the City of Bendigo. Large, decorated, hand operated cast iron embosser with an top iron winder. Winder has a large knob on each end and when turned lowers and raises the seal. Embosser is decorated with a layer of plaster with is black with gold hand painted decorations including scrolls and flowers. Object is extremely heavy. Seal head is still attached and holds the embossing stamp for the City of Bendigo. 'F.M Brown Bendigo' on both sides of the embosser 'City of Bendigo' on seal head.city of bendigo commerce

These types of metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The three railway signalling lamps have local significance as a set donated by a resident of Wodonga who worked for the Victorian Railways, as well as national significance as examples of the communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Set of three painted black metal and glass railway signal lamps used for various purposes during train journeys. The largest signal lamp has circular blue and red glass filters and a turning mechanism on the top under the handle. "A y" on a small copper plate on one side of the largest signal lamp - Lamp 1.railway lamps, signalling lamp, train signal lamps

These types of metal and glass railway signal lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Black painted metal signal lamp with a clear glass lens secured at the front and one thin elongated oval shaped handle showing at the back. The metal appears to be tin plated iron under the black paint layer. There is an oval plate with an embossed inscription on the proper left side of the lamp that is partly covered by the door at the front which holds the clear glass lens. The inscription includes the date 1901."...NARIPPINGILLE STOVE / CO LTD 1901 / PATENT...S & / ...NUFACTURERS / RMINGHAM" on an oval shaped plate on the proper left side, which is partly covered by the door with the clear glass lens.railways wodonga, victorian railways

Small metal hair clippers with two handles to be held in one hand and operated by opening and closing hand. Has blade concealed underneath metal teeth

The pump was restored by Alan Mitchell who was an employee of Zerbe Engineering, Ashburn Place, Blackburn. The work was carried out by Alan in their workshop.The pump was patented by Joseph W. Douglas, Middletown Conn. and the patent was assigned to W & B Douglas.A reconstructed well of red bricks. Circular, dome shaped, it has a grill on the flat top of the dome on which the force pump is situated next to the grill. It circulates the water which is held in a tank beneath the brick structure. The force pump is hand operated with a replacement handle made c1965 by Alan Mitchell who restored and donated the pump. The well is located outside the kitchen door of Schwerkolt Cottage.Patented 1842 M--D Conn.civil engineering, water supply, machinery, pumps