Cream silk, woven in a jacquard style, featuring a floral design. Fully lined with cream silk satin. A 4cm deep, stand-up mandarin style collar. Eight metal hook and eyes fasten the front in a concealed way. Heavy cording, finished with pearl trimmed tassels,a double inverted pleat, 22cm long at the centre back hemline. Three darts at shoulders giving a 'sleeve-like' shape. Lower edges of which are elaborately corded. A 12cm'slit' at the lower edge seam with the front panel gives more flexibilty to the wearer. Tassel head and decorative 1.5cm ''ball'' are woven in a ''turks head'' style. A 2.5cm wide silk ribbon, attached at centre back, and possibly tied around the waist.A card with the cape is hand written - ''For Historical Soc.if wanted, From M.Bush's Collection. Could have been from Mrs. Mueller's. Gift from Mrs. E.G.JARRETT''costume, female, cream silk evening cape

Black cotton with all-over gold paisley type floral patterning. Fully lined with brown cotton fabric. A slight train at the back hemline, and two V shaped flaps-one either side of the back opening, which probably accommodated bussell-like padding. The skirt is tightly gathered at the back to facilitate the padding. Front of skirt is flat, with a little easing of gathers. Pocket inside right hand side seam. A dark brown corded piping edges the hemline. Two metal hooks and eyes, fasten the waistband. Relocated to Clothing Box 176 10.2.2022costume, female, long black and gold patterned skirt

Silver silk, with a jacquard woven floral pattern. Long sleeves have pleated tops, forming a leg-o-mutton sleeve, which gathers in at the elbows, to a narrow fitted sleeve to the wrist. A 4cm wide band of cream satin embroidered and corded lace. Cream cording and lace trims the cuffs, the shoulder/arm hole seam, and two bands on each side of the V shaped cross-over bodice. Metal press-studs fasten the cross over bodice at the waistline. Cream satin with embroidered lace overlay forms a 5cm wide stand-up collar and a centre front panel at neckline. Twelve metal hooks and eyes fasteners fasten the grey cotton front lining of the bodice. The cotton lining of the bodice is part machine, and part hand stitched. Relocated to Clothing Box 176 10.2.2022costume, female, silver silk and lace trimmed bodice.

Wedding Dress. A very delicate, beautiful dress, in a very fragile state, worn over a satin petticoat(11400.1154). Lace bodice, and full length tapered, lace sleeves. Boat shaped neckline, outlined with a tulle insert, that brings the neckline to a high round neckline at the throat. This fastens with two metal press-studs on the left shoulder. This high yoke is edged at the bodice edge with an 8 cm deep frill of tulle, edged at both sides with a narrow frill of tulle, and sewn to the yoke to give a scalloped effect. Skirt is sheer and made from two layers of tulle. A band of lace, 9 cm deep borders the hemline, at knee level and at hip level. Three metal hooks and stitched loops fasten a placket on the left hand side.costume, female, cream tulle and lace wedding dress

Long sleeves, with gathering at the elbow to allow movement. Finished at the wrist with two eleven cm deep frills, edged with two cm wide navy blue, cotton fringing. A four cm deep gathered frill edges the high round neckline, with a narrow piping finishing the neckline seam. Two panels at the front extend from the shoulders,to the peaked waistline. These are gathered at the shoulders, edged in navy blue fringing, and the waistline edge has the gathers alternately stitched together to form a hook and eye fasteners. A fine piping defines the peaked waistline. Bodice fully lined with cream cotton fabric. Armhole/sleeve seam finished with a fine piping.Skirt has been hand stitched into tight tiny pleats. Skirt is fully lined with cream linen, and is edged at the hemline, with one cm soft green braid. Centre front of skirt has a panel extending from the peak of the waistline, where it is 5.5cm wide to the hemline, where it is 20cm wide. This panel is edged in the navy blue fringing, and is attached to the skirt at approx 15-18 cms. Panel is fully lined with cream linen. At approx. 9-10cm spaces a 4cm fabric frill and an angled band of the navy fringing. This gives a ''ladder-like'' effect. Sleeves are bell shaped, and finished at the wrist with a 11.5cm and a 12.5cm frill, both finished with the navy fringing.costume, female, full length dress with blue fringing

Ladies black boned bodice of brocade fabric with floral pattern. Crossover front opening with internal centre fastened with thirteen metal hooks and eyes.Crossover section fastened on LHS with seven metal hooks and eyes covered by overlapping panel. Front of bodice is decorated with dense patterns of small black beads and black sequins. There are three vertical panels of beading. The centre panel is bordered with gathered ruffles of black ribbon (one cm wide). The overlapping edges of the side panels of the bodice are edged with gathered ruffles of black ribbon. The front panels of the bodice are lined with black cotton fabric. The back of the bodice is plain. The bodice has a straight edge at waist level with a cotton tape hem. The lower section of the bodice is boned with ten fabric cased bones distributed across the front and back, attached vertically from the waistband. A fabric belt (three cms wide) is attached at centre back four cm above the waist, inside the bodice. The left hand end of the belt has a metal buckle ( 3cmX2cm). The bodice has a 7cm stand-up collar fastened above the left shoulder with three metal hooks and eyes. The collar is densely decorated with small black beads and black sequins. At each shoulder is an epaulette decorated with beads and sequins and edged with one cm gathered ribbon ruffles. The long sleeves are shaped at the elbows with four cm beaded cuffs fastened with two metal hooks and eyes. Above the cuff is a four cm fabric flounce, a row of gathered ribbon ruffle (one cm) and a three cm row of beading and sequins. Sleeves are unlined.costume, female, ladies black beaded boned bodice.

Ladies waist length black satin boned bodice. Chelsea style collar forming V shaped neckline dipping to eight cm above the waist. Centre insert of horizontal pintucked fabric extends at centre front from throat to just above wrist. Fastened at centre front with thirteen metal hooks and eyes and crossover fastened on LHS with four hooks and eyes. Bodice is lined with black cotton fabric. Collar extends over shoulders to form imitation collar at back extending to centre back waistline. Centre V shaped insert of pintucked fabric hand stitched in place. Nine fabric encased bones inserted into waistband. Two bones on either side of front of bodice, and one bone on each side seam and three bones across the back of the bodice. Stand-up collar with horizontal pleating (5cm wide). Fastened over left shoulder with three metal hooks and eyes. Long sleeves widening at elbow and gathered onto 25 cm lower sleeve narrowing to wrist. Lower sleeve has three X three groups of horizontal pintucks. Slit at wrist - eight cm fastened with two metal hooks and eyes.costume, female, ladies black satin boned bodice

Light camel coloured silk (in very poor condition). Long sleeves overlaid with fine black lace in a floral design. Stand-up collar, five cm deep is overlaid with the fine black lace, and finished with a corded braid on the upper edge. Sleeves are tightly gathered at the shoulder tapering narrow at the wrist, giving a ''leg-o-mutton'' effect. 12cm wide fine black lace, attached at the neck edge, and shoulders, forms a ''puff'' decorative over the shoulder, and continues in a ''over-panel'' to the waistline. Ten x 1cm diameter plastic buttons, with a floral impression in them (2 missing) and 12 hand stitched button holes form the front opening. From the lower opening, six ''pintucks'' 12 cm deep, open into pleats at the lower edge, giving fullness to the bodice. Four metal hooks are evident on the lower tucked front and seven hand stitched eyelets are indicated, but are now severely damaged. Bodice is boned with ten X 17cm long bones, and is fully lined with cotton.A tiny 8cmX7.5cm, oval-at-one-end, pocket is stitched into the front opening, at the bustline. Back hemline dips to a V shape at centre backcostume, female, victorian bodice - cinamon coloured silk

Beautiful soft cream silk dress, with a random silk embroidered three petal flower over the fabric. Round neckline with overlaid square yoke of embroidered lace on a net background. Two 7cm wide bands of the lace are gathered over the shoulder armhole edge. These frills, and the scalloped edges of the front and back lace yoke are trimmed with 4 cm long decorative silk tassels.(one missing). Long sleeves, tapered in at the wrist are trimmed at the wrist with a 4.5cm wide band of lace, part of which is threadedwith two rows ofsoft pink silk ribbon insertion. Soft pink silk, folded into three 2.5cm tucks-overall width 6cm trim the high waistline, with a 7cm diameter rosette at the left front, and a bow(?), and tails, trimming the back waistline. This is severely damaged. Four metal hook and loops fasten the back lace collar, and nine metal hooks and eyes fasten the bodice. Bodice and sleeves are fully lined. Bodice is boned with thirteen 12-4 cm long ''bones''. Skirt is in two tiers; Top is 38cm deep, and made from the plain embroidered silk. A 5cm deep band of lace, with scalloped edges then joins the 36 cm deep ;lower panel of beautifully embroidery and pulled threadwork. Hem is faced, and finished or hemmed with french knots. Dress , which is hand stitched is fully lined with cotton. The lower 36 cm deep tier of the underskirt is trimmed with three .5cm tucks, and two 8cm bands of cutwork lace in a floral and geometric pattern. An oval shaped pocket is sewn into the front of the ''petticoat'' lining. This pocket contained some plant material, included in attached bag.costume, children's, cream embroidered silk and lace dress

A school sampler from the 1930's, demonstrating a mastery of numerable sewing skills: Buttonholes- both bound;6 bound buttonholes. Button loop fastening 17 rouleau loops. Seams: Plain flat seam, machine stitched-part neatened by hand, and part neatened by machine. An overlapped flat seam-machine stitched. Fasteners: Press-studs (3) Buttons (4) shanked and f;flat. Metal hook-and-eyes (3), one eye hand stitched, all attached in buttonhole stitch. Pockets: (2) Machine stitched. Collar: (1) Rounded ''Peter Pan"" collar, with bound placket opening, one pearl button, and hand stitched loop. Facings (3). One square, one round, one Vshaped. Pintucks: 4 machine stitched pintucks.textiles, domestic, school needlework sampler 1930's

Large round cedar cased wall clock with black hands and Roman numerals on a white painted metal dial pan. Time only with a chain driven fusee movement, brass bezel with flat glass. 1 side and 1 bottom inspection doors, top and bottom wall securing hooks, front of clock secured to case with wooden pegs. Brass pendulum with circular brass bob, rating nut and suspension spring. Written on clock face 'Joseph & Co., Sandhurst' (Bendigo).Joseph & Co Sandhursthorology, clocks, joseph & co

Wall clock in a round cedar case with a single black stationery hour hand and moving brass dial, black Roman numerals surrounded by a brass outer ring with a stippled look, brass bezel painted black with flat glass, 1 side and 1 bottom inspection doors, top hook for hanging, front of clock secured to case with wooden pegs. Brass pendulum with bob. Time only Fusee chain driven movement. Dial engraved 'James Murray & Co Inventors Melbourne & Royal Exchange London.James Murray & Co Inventors Melbourne & Royal Exchange Londonhorology, clocks, one handed, horology-clocks-james murray & co

Most likely collected and donated by Dr Frank Forster. Labelled Standard blunt hook and crochet- viewed by Bryan Hibbard.Blunt hook and crochet, with central hand grip of mahogany wood inlaid on either side. Unknown manufacturer.obstetric delivery, blunt hook, destructive instrument

Most likely collected and donated by Dr Frank Forster.Blunt hook and crochet, with central hand grip of mahogany wood inlaid on either side. Maufacturer's stamp "MAW LONDON". MAW stamped at one end near the central wood inlay handle and LONDON at the other end.obstetric delivery, blunt hook, destructive instrument

Clothing.Woman's black silk blouse. Bodice is made up of two layers. Inner layer of black cotton has full length front opening with placket with five buttons and button holes from 5cm below round neckline to 5cm above the waist. There is a breast pocket on the LHS (14cm X 11cm). The outer layer of black silk is attached to the inner layer at the shoulders (pleated) and around the arm holes, and hand stitched at the lower back to form a casing for cotton tape ties. The front forms a full width crossover with one metal hook on top LHS. The outer layer extends 7 cm below the inner layer at the waist with a 7cm peplum across the back. Set in long sleeves are tapered at the wrist with a 5 cm frill at the hem. Sleeves fully lined. Hand and machine stitched. Fold over collar (10cm) with squared corners.Decorative black , gold and pearl button on each wrist on hem.costume, female, woman's black silk blouse.

The Adlake Non Sweating Lamp "THE ADLAKE NON SWEATING LAMP CHICAGO" Adlake is a shortened name of the "Adams and Westlake" company. They began doing business in 1857 in Chicago. They manufactured railroad supplies and hardware in Chicago. In 1927, they moved to Elkhart, Indiana, where they remain in business today. The difference between "lamp" and "lantern" is that the lamp is meant to be hung on a post or a hook during use and the lantern is hand-held and only used when a person is directing traffic. It has four lenses- two amber and two blue. Adams & Westlake, also known as A&W or Adlake, became a dominant maker of short-globe lanterns and their #200, #250, and plain “Kero” (sometimes known as #300 or #400) models were sold by the thousands to the entire range of railroads. Short-globe lanterns came about because manufacturers figured out how to get a lantern to burn properly with a shorter combustion chamber, which allowed lanterns to be shorter and cheaper. Adams & Westlake began selling #200 Kero lanterns around 1921 and they sold well, the #250 Kero lantern was released in the mid 1920’s as an improvement over the #200 version, with a new burner design. FInally, around 1930 Adams & Westlake released models marked simply “Kero” but are sometimes known as the #300 or #400 models, which are further refinements. The #200, #250, and “Kero” models all look very similar in design and in fact they are all pretty much the same frame design with a couple of minor differences on the later “Kero” models. Short globe lanterns are still very easy to find because they were produced well into the mid 1900s. Adams & Westlake short globe lanterns can usually be dated by looking for a two-part date code on the bottom of the lantern. The first digit will be 1,2,3, or 4 followed by a dash and then a two digit number. Sample code: 2-39 would mean that the lantern was produced in the 2nd quarter (Apr-Jun) of 193Historic - Railways - Adlake Non Sweating LampAdlake Non Sweating Lamp made of metal and glass Metal with handle, painted black, oil Bullseye lens, 13 cm diameter, green Circular lens on opposite site, 5 cm diameter, clear Sliding panel provides access to burner Rain shield embossed 'THE ADLAKE NON SWEATING LAMP' 'LAMP MFG 7 RLY SUPPLIES LONDON''THE ADLAKE NON SWEATING LAMP' 'LAMP MFG 7 RLY SUPPLIES LONDON'puffing billy, adlake non sweating lamp

During early farming in Australia (before motorised whipper snippers) the hand held sickle was used to cut long grass, in this case in or around railway tracks. The inside of the blade's curve was sharp, so that the user can either draw or swing it against the base of the grass, catching the stems in the curve and slicing them at the same time. Historic - Railway Permanent Way and Works - track equipment - Grass SlasherWrought iron sickle with extended with wooden handle.puffing billy, extended sickle, farm tool, reaping hook, curved blade, grass cutting

NSWTD Railway Marker OIl lamp, No.1 RA Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil Lamp NSWTD Railway Marker lamp, No.1 RA made of metal and Glass Railway lamp, paraffin, metal/glass/fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870 - 1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTD 1 RApuffing billy railway , pbr, nswtd railway marker oil lamp, no.1 ra

Four NSWTD Railway marker Oil lamps at Nobelius Packing shed Item stamped numbers unknown Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil LampFour NSWTD Railway marker Oil lamps made of metal and glass Railway lamp, paraffin, metal / glass / fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870-1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTDpuffing billy railway , pbr, four nswtd railway marker oil lamps

Used by child internee at Camp 3. Hand sewn.Handsewn, cotton lined, rabbit skin cap with chin strap (red and black). Fastening - Hooks and eyes (2)childs' cap, hoefer family, camp 3, tatura, ww2, children, headwear, rabbit skin

made and used by internees in Camp 3 Tatura during WW2 for making shoes and bootsHand tool used for bootmaking, hook for leatherhook, bootmakers kit, haering, manfred, camp 3, tatura, hand tool, !, trades, bootmaking

Pulpwood was often split by hand or with black powder splitting guns into more manageable sizes and cut into 8 foot lengths (or billets). Billets were first stacked endwise to drain the sap and lighten the load before they were loaded by hand onto flat bed trucks for transport to the mills. This long length metal hook was used to pull and manoeuvre the pulpwood billets onto the truck. The advent of excavators in logging operations in the 1970s led to the loading and carting pulpwood in long tree lengths.Long steel tool with handle on one end and hook on the other.

Belonged to Kathleen Marjorie Dunn (nee McKenzie)Formal day dress in black crepe. It has a round neck and short set-in sleeves. The front opens from neck to waist and has four self-covered shank buttons. The bodice is slightly gathered at two points front and back. The skirt is gathered centre front with seven rows of shirring. The bodice features six arabesques in black and white beads. The skirt has two false pockets with similar beading. A small vent at the left waist closes with a hook and eye. The dress is machine sewn with a hand sewn turn-up on the hem.Nonecostume, george evans collection

Small hand tool. May be yarn hooks. From Collins Bros Mills.

Donated by grand daughter of Edith and Ron Palmer. Bride Ellen Lidgerwood married Ron Mathers on 4 September 1937.The Best Man was the brother of the Groom, George Mathers. The bridesmaid was the sister of the groom, Miss Mathers and the flower girl was the niece of the bride, June Lidgerwood. For full family history and photos of both weddings see Supplementary File NA3817 & NA3818. Dress worn by Ellen at her wedding and Veil worn by both sisters Edith and Ellen Lidgerwood at their wedding ceremonies, Edith in 1936 (see NA3817) and Ellen in 1937Prominent Box Hill families1937 cream seersucker dress featuring a cowl neck and long sleeve, slit at shoulder to create cowl effect. Slim at lower arm to a point over the hand and fastened at seam with press stud. Bodice cut on the cross under the bust. Cut on the cross figure fitting skirt to the floor, complete with long train. On the back is a slit opening fastened with hook and eye and glass clear buttons. Below the slit are eight glass buttons with false rouleau button loops. The train is made of an added detachable piece. Veil worn at both sisters weddings but with different headdresses. Headdress has small circle of flowers and berries. See sister's wedding dress NA3817.costume, female ceremonial

World War Two Army uniform|Worn by Captain Noel WestWorld War two|Australian War Graves UnitOne khaki woolen army great coat, wide lapels wide cuffs, double breasted, four sets of medal buttons. Wide pocket cuffs on two external pockets. Epaulets on each shoulder with Australian badge and 3 pips and one button. Badge on right hand shoulder- blue with crown '' British Commonwealth Forces''. Collar with neck flaps with four bakelite buttons. Pleat on top of coat with belt with three metal buttons. Vent on skirt of coat with two bakelite buttons.Back of coat is lined to the vent, sides are fully lined with cotton fabric, sleeves are fully lined. One deep pocket on left side with one bakelite button. Fabric hook on back of collar''MTS'' N.WEST. British Commonwealth Forcescostume, male uniform, military

Used to communicate with the local telephone exchange and for connection to other subscribers. The introduction of automatic exchanges saw the their demise. This phone was used in the family home of the donor at Caboolture (aboriginal for carpet snake) during the 1940s and 1950s.A magneto telephone for communication with a manual telephone exchange. The handle on the right hand side, which was turned to rotate the magneto to call the exchange - ask operator for a number and then to be connected. Telephone enclosed in a specially designed box for mounting on the wall. There was a bell on top which rang when the magneto ringer at the exchange was turned. Fitted with a carbon microphone mounted on the front of the box for the transmission of the spoken word and an electro- magnet. A receiver which hangs on the left hand side on a hook. The hook acts as the on and off switch to answer the call and to switch on the battery to provide power for the receiver and energize the transmitter. There is an angled ledge for writing any messages. There is no battery. The circuit for the phone is on the inside of the door to the interior of the phone. pHone is type CDA116 - PMG Registered - Ericsson.communication, telephonic