Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Black and white photocopy of probably colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Black and white photocopy of probably colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, steve, alan

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, alan

This field telephone was developed primary for military purposes (World War I) and other wars/military interventions there after. It was the first "mobile" telephone which had a prime objective of providing isolated or "hard" to connect with locations instant communication links. Like a lot of "new" technologies it evolved from a war environment. This handset was used to connect offices and workshops, which due to their functions could not be co-located with their prime office(external workshops).The evolution from the early 1900s to the mid 1980s when mobile communication technology progressed in leaps and bounds from hard wire telephone communication to mobile digital receivers. This handset was manufactured by a subcontracted Australian company under the Australian Post Office mandate.This handset is significant in that it was donated by the Mount Beauty Timber yards and formed an integrated part of its communication system with its out lying work yards and buildings, before the mobile handset evolution. This handset was located in an environment which required a rugged and reliable day to day communications linkage as a vital part of its logistical (business) survival. As progress demands it, the faster that customers are satisfied with the service they obtain from suppliers the longer those services will be asked for and the longer and more profitable the supplier will be. This edict is as true for rural companies as it is for small or large city businesses. The customer is "always" right.This sturdy field telephone has a shell housing made in black bakelite material with a "U" form housing the major components (wiring, magneto and batteries). The main housing has two metal bells, with a central ringer between both, on the top part (to notify incoming calls). In front of the main structure is a box with the telephone hand piece (ear and mouth receptacles) nestled on two cradles. An on/off switch is activated when handset is removed from its cradle. On the front of the control box is a winder handle(to ring off) and in a field situation to activate/deactivate the magneto. To the left of the winder but on the the main body are two wind up connection buttons for the connection of operational wires (power)On the main right hand front body and next to two chrome switches is a plate with "L (next to the top switch) and below this "L2" and underneath this are "or" "EARTH". There is a plate fastened to the front of the handset and behind the winder with "REPLACE HANDSET WHEN FINISHED" and below the winder 'SERIAL NUMBER 5116"field telephone, world war ii field telephone f mk i

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Claire Fitzpatrick (red jacket) and Gillian Barclay (white jacket). Colour photographeltham living and learning centre, 1989, claire fitzpatrick, goat shed, gillian barclay

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.)Invitationeltham living and learning centre, goat shed, peter graham

In 1943 a camp for workmen was erected and a commencement made with the erection of plant storage and workshop buildings in the new township of Mt. Beauty. The photograph was probably taken after the completion of these buildings. There is no sign of construction of the town itself. In the latter part of 1945 work was commenced on the Mt. Beauty township area with a medical centre, general trading store and some houses under construction. The No. 5 Road, from where the photograph was taken, is the road to West Kiewa Power Station and Big Hill Scenic Lookout.Is an excellent view of the Kiewa Valley before there was little work undertaken to establish the town of Mt. Beauty. Farming was well established with the evidence of huge areas of cleared land. The junction of the East and West Kiewa Rivers can be clearly seen. The first Workmen's camp is near the river and some workshop buildings can also be seen. Black and white photograph of the Kiewa Valley, looking North.Handwritten on the back of photograph "Kiewa Valley from No. 5 Road".kiewa valley, camp, buildings, mt. beauty

Arthur Street, Eltham next to ANZ Bank The Hiroshima Day Banner was made by Jacky Talbot as part of the project. The women wanted to do something for Hiroshima Day and suggested that a workshop be set aside to make a banner. The artist was concerned about the remaining time scheduled for the project and spent several days "whipping" up the banner herself. For the artist this banner was to prove quite significant. The women hung it at the Community Notice Board on Hiroshima Day and were photographed by the local newspaper publicising the group and drawing wider community attention to the remembrance of the day. Although no new members joined the group from this activity, the artist felt that she was more fully accepted by the group afterwards. This banner has initiated a small group of women committed to peace. The artist has also continued to liaise and meet with the women as time permits. Future group plans include: making kimonos to wear when carrying the banner, participating in the Palm Sunday March, an observance of Hiroshima Day activity, which is yet to be decided, establishing contact with a sister-town in USA and USSR and supporting Eltham Council's stance as a Nuclear Free Zone. (The banner habits of the Eltham tribes : Eltham Shire "as we are" Community Banner Project report /​ by Jacky Talbot, Shire of Eltham, Feb. 1987, p46) Used in Shire of Eltham display at the Eltham Community Festival, 7 November 1987. Shire of Eltham Engineering Department Providing the resources to undertake • Survey, design, consultation • Road construction and maintenance • Bridge construction and maintenance • Street sweeping • Drain and pit cleaning • Traffic engineering installation and maintenance • Garbage collection • Tip management, land reclamation and beautification • Maintenance of community buildings • Provision of community and recreation facilitiesIllustrative of services provided by former Shire of ElthamColour photograph 20 x 29 cm mounted on green-painted chipboard 28 x 35.5 cm (string on back for hanging) Ref: 01842-0Title printed on label adhered to board below photograph (replaced June 2017)display panel, eltham festival, eltham peace banner, hiroshima day banner, infrastructure, shire of eltham, laurel eckersall, anne laurence, betty johnson, joan maclagan

Interior of timber workshopWritten on catalogue card, "Ringwood Timber & Trading Co. New Street, Ringwood".

The Council President in 1984 was Ian Gordon.Yellow soft covered book. Contents include: Review of College objectives and organizational structure, Nursing, Mining Engineering Education, Physical Education, Ultra Violet Visible Spectrophotometer, Microbee computers, Scanning Electron Microscope, Peter Colville, Thelma Rungkat, Ray Cotsell, Samantha Taylor, Don Fairhall, George Wasyluk, staff resignation of Alan Roberts, Lynette Snibson, Margaret Bowman, John Burrell, Malcolm Mackinlay,Fazal Rizvi, Irene Wasyluk, Wendy Batchelor, Peter Coman, Micro-teaching area, Staff retirement of Geoff Biddington and Mr Rofe, Staff appointment of Richard Dutton, Peter McCarthy, Richard Croggon and Jim Nugent, building of external kiln, Studio Production Ceramics, Nellie Skolnikova, John Hopkins, Sonny Dalimore, Judi Hill, Academic Registry, Staff resignation of Josephine Ryan, Staff appointment of Diane Costello, building of Metallurgy workshop/shed, Beaufort House, new road entrance to campus, ballarat college of advanced education, bcae, mt helen, mount helen, gordon, tippett, dobell, parkin, tippett, crouch, kiln, ceramics, skolnikova, hopkins

The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only.Black and white photograph of the Davey Paxman Experimental Steam Engine installed at the Ballarat School of MInes. steam engine, model steam engine, davey paxman, thomas bath, experimental steam engine

This is one of two cast brass nameplates of James & Alexander Brown in our collection. The Newcastle, NSW, firm was renowned for its coal mining and exporting business established in colonial Australia in 1843. The firm had an office in Melbourne and sold coal for commercial use and from the Wharf for the domestic market. The coal was then distributed along the southwest coast of Victoria in steamships or steam packets and into the regional areas of Victoria by cart and wagon. In 1890 there was a strike of coal workers but the Geelong Advertiser, September 1, 1890, announced that “a firm of coal merchants only recently received some large cargoes from Newcastle”. This supply of coal could have originated at the colliery of James & Alexander Brown. About James & Alexander Brown: - James (1816-1894), John (1823-1846) and Alexander Brown (1827-1877) migrated with their parents from Scotland to Sydney, Australia, in 1842. The next year James leased land and was assisted by his brothers Alexander and John in mining coal in the area near Maitland. The market was very competitive, with the government controlling prices. James was instrumental in a legal battle that resulted in the introduction of open competition for coal mining. James and Alexander had become business partners by 1852 and moved south of Newcastle where they established and worked a profitable mining enterprise. Their assets by 1857 included a ships’ chandlery, a fleet of steamships and an overseas trading business. They were the first firm to import rum, sugar and coffee into Newcastle. By 1892 they were exporting coal to New Zealand, China, North America, and various colonial ports. They had elaborate workshops to service their own steam engines and steamships. They were the first to use a steam collier vessel in Australian waters and they set up the second tug boat in Newcastle, the beginning of being owners of many more tug boats and performing a towing business. By 1868 James & Alexander Brown was the largest coal producer in the colony. James focused on managing the colliery and Alexander on overseas trade. It was estimated that the firm had produced over eight per cent of coal in New South Wales by 1914. James & Alexander Brown advertised in the Melbourne Herald in the early 1900s and kept an office at Queen Street, Melbourne as well as at the Wharf, stating their telephone numbers for both places. The coal was available for ‘Immediate Delivery’ for household and industrial purposes. The advertising claimed that their Pelaw Main coal was the famous household coal that met the highest test in Australia and burned bright and clean. Domestic customers could purchase the coal at the wharf or pay for delivery. Commercial customers could load their purchases into their steamships or wagons for further distribution into regional Victoria. After James’s death in 1894 his son John managed the firm, which was also known as J & A Brown. John passed away in 1930 and his sons took over. In 1931 the firm amalgamated with Abermain Seaham and the new name was J & A Brown & Abermain Seaham Collieries Ltd. commonly abbreviated to JABAS, which merged with Caledonian Collieries Ltd in 1960 and Coal & Allied Industries Ltd. was formed. The pair of nameplates is significant for its connection with the firm James & Alexander Brown. The firm was established in 1845 and became one of the largest collieries in colonial Australia. It was involved in trading within Australia and overseas. James was involved in the introduction of open competition for coal mining prices. They were the first to use a steam colliery in Australian waters and the first to import goods such as rum, sugar and coffee into New South Wales. The firm had a Melbourne office in the early 1900s, selling and distributing coal throughout Victoria, which likely included the Port of Warrnambool, which opened in 1890. The nameplates are likely to have originated from the Melbourne location.Brass Entrance Name Plate, one of a pair. Eight holes are formed through the plate; one in each corner, and four more holes are within the inscription area. The cast plate has three rows of text with the company’s name and type of business. The plate was owned by James & Alex. Brown. "JAMES & ALEXR. BROWN / COLLIERY PROPRIETORS / & STEAMSHIP OWNERS"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, nameplate, james & alexander brown, j & a brown, james & alexr brown, colliery proprietors, steamship owners, ship chandlers, coal mine, coal export, australian import, australian export, newcastle, colliers, coastal trade, steamships

This is one of two cast brass nameplates of James & Alexander Brown in our collection. The Newcastle, NSW, firm was renowned for its coal mining and exporting business established in colonial Australia in 1843. The firm had an office in Melbourne and sold coal for commercial use and from the Wharf for the domestic market. The coal was then distributed along the southwest coast of Victoria in steamships or steam packets and into the regional areas of Victoria by cart and wagon. In 1890 there was a strike of coal workers but the Geelong Advertiser, September 1, 1890, announced that “a firm of coal merchants only recently received some large cargoes from Newcastle”. This supply of coal could have originated at the colliery of James & Alexander Brown. About James & Alexander Brown: - James (1816-1894), John (1823-1846) and Alexander Brown (1827-1877) migrated with their parents from Scotland to Sydney, Australia, in 1842. The next year James leased land and was assisted by his brothers Alexander and John in mining coal in the area near Maitland. The market was very competitive, with the government controlling prices. James was instrumental in a legal battle that resulted in the introduction of open competition for coal mining. James and Alexander had become business partners by 1852 and moved south of Newcastle where they established and worked a profitable mining enterprise. Their assets by 1857 included a ships’ chandlery, a fleet of steamships and an overseas trading business. They were the first firm to import rum, sugar and coffee into Newcastle. By 1892 they were exporting coal to New Zealand, China, North America, and various colonial ports. They had elaborate workshops to service their own steam engines and steamships. They were the first to use a steam collier vessel in Australian waters and they set up the second tug boat in Newcastle, the beginning of being owners of many more tug boats and performing a towing business. By 1868 James & Alexander Brown was the largest coal producer in the colony. James focused on managing the colliery and Alexander on overseas trade. It was estimated that the firm had produced over eight per cent of coal in New South Wales by 1914. James & Alexander Brown advertised in the Melbourne Herald in the early 1900s and kept an office at Queen Street, Melbourne as well as at the Wharf, stating their telephone numbers for both places. The coal was available for ‘Immediate Delivery’ for household and industrial purposes. The advertising claimed that their Pelaw Main coal was the famous household coal that met the highest test in Australia and burned bright and clean. Domestic customers could purchase the coal at the wharf or pay for delivery. Commercial customers could load their purchases into their steamships or wagons for further distribution into regional Victoria. After James’s death in 1894 his son John managed the firm, which was also known as J & A Brown. John passed away in 1930 and his sons took over. In 1931 the firm amalgamated with Abermain Seaham and the new name was J & A Brown & Abermain Seaham Collieries Ltd. commonly abbreviated to JABAS, which merged with Caledonian Collieries Ltd in 1960 and Coal & Allied Industries Ltd. was formed. The pair of nameplates is significant for its connection with the firm James & Alexander Brown. The firm was established in 1845 and became one of the largest collieries in colonial Australia. It was involved in trading within Australia and overseas. James was involved in the introduction of open competition for coal mining prices. They were the first to use a steam colliery in Australian waters and the first to import goods such as rum, sugar and coffee into New South Wales. The firm had a Melbourne office in the early 1900s, selling and distributing coal throughout Victoria, which likely included the Port of Warrnambool, which opened in 1890. The nameplates are likely to have originated from the Melbourne location.Brass Entrance Name Plate, one of a pair. Eight holes are formed through the plate; one in each corner, and four more holes are within the inscription area. The cast plate has three rows of text with the company’s name and type of business. The plate was owned by James & Alex. Brown. "JAMES & ALEXR. BROWN / COLLIERY PROPRIETORS / & STEAMSHIP OWNERS"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, nameplate, james & alexander brown, j & a brown, james & alexr brown, colliery proprietors, steamship owners, ship chandlers, coal mine, coal export, australian import, australian export, newcastle, colliers, coastal trade, steamships

The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only. Black and white photograph of an experimental steam engine which was produced for the Ballarat School of Mines. It was designed for experimental purposes, such as testing of efficiency, etc. The laboratory which housed the steam engine was lit with gas lighting. davey paxman experimental steam engine, model steam engine, davey paxman, steam, thomas bath, thermodynamics

The Davey Paxman Experimental Steam Engine was purchased by the Ballarat School of Mines as the result of a bequest from Thomas Bath.The Davey Paxman Experimental Steam Engine was purchased as the result of a bequest from Thomas Bath. The 'substantial sum' was used to build an Engineering Laboratory. The Ballarat School of Mines Council minutes of 08 November 1901 record: - Plans for [the] proposed building were submitted ... and ... it was resolved that a temporary building for an Engineering Laboratory be put up.' This laboratory, as an existing building, is first mentioned in the Ballarat School of Mines President's Annual Report of 1901, presented on 28 February 1902, reporting 'the erection of a building 67ft long by 33 ft wide' This report also lists all the equipment that would be accommodated in the Engineering Laboratory, including the experimental steam engine and boiler. The experimental Davey-Paxman steam engine arrived in Ballarat towards the end of 1902. The Engineering Laboratory was opened on 14 August 1903 by His Excellency Sir Sydenham Clarke. This engineering laboratory remained in use till about 1945. By 1944 preparations were under way at the Ballarat School of Mines to expand existing facilities, to be ready for the influx of returned soldiers. A new Heat Engines laboratory was built, this time of brick construction, replacing the previous corrugated-iron shed. In the early stages the steam engine was used to drive an overhead transmission shaft for machinery in the adjacent workshop. Later the steam engine was moved to a space that became the Heat Thermodynamics Laboratory. At the end of 1969 the engine was relocated to the Thermodynamics Laboratory at the then Ballarat Institute of Advanced Education (BIAE) Mt Helen Campus. It was donated to Sovereign Hill in 2006. According to the research of Rohan Lamb in 2001 around five experimental steam engines were made by Davey Paxman, and three of these had similar configuration to the Ballarat School of Mines Steam Engine, however, each of these was also unique with different valve arrangements. The list, which was on a scrap of paper in a folio held in the Essex Archives, confirmed that one was sent to India. The Ballarat steam engine can be dated to late 1901 to early 1902. Zig Plavina was responsible for moving the steam engine to Mount Helen, and worked on it as a technician for many years. He observed the following: * The condenser is driven by the low pressure engine. * The following arrangements are possible: i) the high pressure engine alone, exhausting to atmosphere. Condenser not used, crankshaft flanges not coupled. ii) crankshafts coupled, mains pressure (120 psi) steam supplied to high pressure engine, partially expanded steam delivered to low pressure engine (Tandem operation). Choice available re exhaust steam: either to the condenser or to atmosphere. iii) crankshafts not coupled, reduced pressure steam supplied to low pressure engine. Exhaust steam - either to the condenser or to atmosphere. * Valve arrangement - a choice of Pickering cut-off or throttle governor. On low pressure engine - throttle governor only.davey paxman experimental steam engine, model steam engine, steam, thermodynamics laboratory, thomas bath, bequest

.1) Ballarat School of Mines Sound Installation of Plumbing Shop, by architect John Firth, 1954 .2) Plan and sections of the proposed Scheme - conversion of Ballarat School of Mines Clay Mill Building to Fluid Mechanics Laboratory, by architect John E. Dixon, 1962 .3) Plan for Ballarat School of Mines New Sanitary Accomodation, 1967 .4) Plan for Ballarat School of Mines Extension to Existing Workshop by architect Percy E. Everett. The plan includes the former Ballarat Supreme Courtjohn firth, percy everett, john e. dixon, ballarat school of mines, clay, ceramics, plumbing, buildings, architectural plan

The lathe-making business incorporated in 1902 as Drummond Bros Ltd originated in the fertile mind of Mr Arthur Drummond, said to have been living at that time at Pinks Hill, on the southern edge of Broad Street Common, west of Guildford. Mr Drummond, whose accomplishments included several pictures hung in the Royal Academy, was unable to find a lathe suitable for use in model engineering. In 1896 he designed for himself a ‘small centre lathe … which had a compound slide rest with feed-screws and adjustable slides’. He also designed and built ‘lathes of 4.5 inch and 5 inch centre height, which had beds of a special form whereby the use of a gap piece was eliminated but the advantages of a gap-bed lathe were retained’. Assisted by his brother, Mr Frank Drummond, who had served an apprenticeship to an engineering firm at Tunbridge Wells, the first lathes were made in a workshop adjoining Arthur Drummond’s house. The demand that speedily built up led to the decision to form a company and manufacture the lathes for sale commercially. Land was acquired nearby, at Rydes Hill, and the first factory built. The enterprise was a success, and the company quickly established ‘a high reputation in this country and abroad for multi-tool and copying lathes, and gear-cutting machines’. Other lathes were added to the range, including the first of the ’round bed’ machines for which the firm became widely known. A Drummond 3.5 inch lathe was among the equipment of Captain Scott’s 1912 expedition to the South Pole, and large numbers of 3.5 inch and 4 inch designs were exported to Australia, Canada and India. By the outbreak of war in 1914, 5 inch, 6 inch and 7 inch screw cutting lathes, arranged for power drive, were on sale. Large orders were received from the government for 3.5 inch lathes, for use in destroyers and submarines, and 5 inch lathes for the mechanised section of the Army Service Corps. The latter were used in mobile workshops. The factory worked night and day to supply the forces’ needs, until production was disrupted by a fire which destroyed a large part of the works in May 1915. As soon as rebuilding was complete work restarted. At the end of the war the entire production was being taken by the Government departments, a special feature being a precision screw lathe, bought by the Ministry of Munitions in 1918. Between the wars Drummond Bros Ltd introduced new machines for the motor vehicle, and later the aircraft industry, and the works were extended on many occasions to fulfill the increasing orders. The Maxicut multi-tool lathe (1925), designed for high-production turning operations, was one of the first machines of this type to be built in England. It was followed (1928) by an hydraulic version for turning gear blanks, and similar work. Further developments provided machines which, during the Second World War, turned all the crankshafts and propeller shafts for Bristol engines. Others, ordered by the Ministry of Supply were employed in turning shells, and many other specific needs of vehicle and aircraft manufacture were catered for by new types of Drummond lathes. Production of the small centre lathes ceased during the war when the company needed to concentrate on building multi-tool lathes and gear shapers. After the war a completely new Maxicut range was introduced, replacing the older versions, and fully automatic. The types were continually developed, and new versions manufactured until the end of the company’s life in 1980. The disappearance from the scene of Mr Arthur Drummond in 1946, and the end of the company’s autonomous existence in 1953 when the company was acquired by William Asquith Ltd, which was in turn bought by Staveley in 1966, meant that the factory at Rydes Hill became one – albeit very effective – part of a large national engineering company. Achievements at the Guildford works during its last years included the development of automated Maxicut gear-shapers in what was ‘probably the most fully automated gear shop in the country’, while a machine from Guildford was sent to the Osaka Fair in 1962. In 1963 an agreement was signed with Hindustan Machine Tools for the manufacture of Maxicut gear-shapers in state owned factories in Bangalore and Chandigarh. During 1963 the two largest multi-tool lathes ever made in the UK were installed in Ambrose Shardlow’s works in Sheffield for handling cranks up to 14 foot long. In 1976 Drummond lathes were included in Staveley’s £14,000,000 installation in Moscow of an automated production line for Zil motor cars. Up to the end invention continued at Guildford: a new Drummond Multi-turn memory-controlled machine was shown at the International Machine Tool Exhibition in 1977. This could not save the works from the pressures of the late 1970s, and Staveley Industries closed its Guildford site in 1980.An early example of a lathe that was designed primarily for the hobbyist model maker. It is in good condition and sought today by collectors as many of it's attributes were innovative at the time and lead to further development and incorporation of some of its features into more industrial models of production machinery. Lathe, round bed, treadle powered lathe, Drummond Type A, Serial number and maker's inscription. 1920-1923, Made by Drummond Brothers in Guildford, Surrey, England. Lathe is complete with Chuck, Tool post and Tail Stock in situ (30 extra parts)"MADE BY DRUMMOND BROTHERS LIMITED - PATENT TEES - RYDE'S HILL n GUILDFORD SURREY", "Serial Number 01470," "L44" or "L45 " flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lathe 1920-1923, round bed lathe, treadle lathe, drummond type a, guildford surrey, drummond brothers guildford surrey england, tread'e

In 1947 Percy Everett, Chief Architect for the Victorian Government, drew up plans to accomodate the growth in student numbers on the Ballarat School of Mines site. It was an era of government buildings surrounding the Ballarat School of Mines campus either being transfered to the school or foreshadowed for transfer. In 1947 two Red Cross huts were transferred from Victoria Park to the western side of the former Ballarat Supreme Court (later Courthouse Theatre) for use by Wool Classing and Motor Mechanics. In the same year additional facilities were provided for Pottery due to the increase in enrolments and a large brick classroom was built at the rear of the Ballarat Junior Technical School Building. In the annual report of 1947 the President said: "These transfers are, however, only temporary expedients and indicate the pressing need for more buildings of a permanent nature". By the end of the year the School Council decided to request the Education Department of Victoria to proceed with the implementation of the School's long-range plan whch had received approval earlier and to treat it as an urgent post-war requirement. After much communication a plan for a six-storied building, flanked by two three storied buildings was planned to be built on the site of the Ballarat Gaol was developed. The plan was sent to the Education Department for the Minister's Approval. It is not know if approval was granted, but the building did not proceed, possibly becausse the Ballarat Gaol was still very miuch in use. When a tertiary division of the Ballarat School of Mines was being developed in 1967 it corresponded with the closure of the Ballarat Gaol. It was determined that the Lydiard Street South site had no room for future growth so a new campus was sought. The new campus was purchased at Mt Helen, and was initially known as the Ballarat Insittute of Advanced Education. In 1976, when the Ballarat Teachers' College merged into the structure, the campus became known as the Ballarat College of Advanced Education and it was no longer a part of the Ballarat School of Mines. Plans for a proposed building to replace the Ballarat Gaol buildings. The proposed building was never built, the concept being replaced by a new teritary facility at Mt Helen. buildings, percy everett, ballarat school of mines battery, ballarat technical art school, engineering workshops, machine shop, ballarat junior technical school, architectural plans, ballarat school of mines, smb campus

On 11 June 1987 The M.B. John Trade–Art building (Albert Street front) of SMB was officially opened by the Hon. John Cain, Premier of Victoria, in the presence of Morgan B. John. Programs include 3 Dimensional Art, Painting & Decorating, and Engineering Trades. (SMB Institutional Plan 1989)Large format copy of a drawing projecting the new M.B. John Building into the Ballarat School of Mines environment. The view is from within the School of Mines in close proximity to the Ballarat School of Mines Botanical Gardens. ewan jones and associates, architects, m.b. john building, m.b.john, morgan b. john, morgan bevan john, ballarat school of mines, buildings

Used at School of mines and industries Ballarat As H.V. McKay's Sunshine Harvester business expanded there was a requirement for a school to train the company's apprentices. In 1911, H.V. McKay wrote to the Victoria Cabinet offering 2,000 pounds and 4 1/2 acres of land in Derby Rd for a technical school, On the 7th July 1913, the new Sunshine Technical School opened with a wooded administration building with six class rooms and a large galvanised iron workshop for the trade apprentices. Mr George Baxter was appointed principal with assistant teachers, A.J. Dunlop (Maths & English), W.W. Anderson (Art) & H.B. Ernest (Maths & Science). Seventy students were enrolled in the first year of which 44 were apprentices from the Harvester Works. During the First World War Years (1914 - 1918) there was a difficulties with staffing and enrollments. The school was also used to provide vocational training for wounded returned soldiers. In 1919 during the great influenza epidemic the school was used as a hospital. ​Light blue soft covered booklet of 60 pages with information about office bearers, staff, objects of the school, prizes and scholarships, examinations, time tables, courses, and subjects. It has photographs and advertising.sunshine, technical school, sunshine technical school, prospectus, hugh victor mckay, r.m. lambert, george mckay, d.b. ferguson, samuel mckay, george bult, ralph mckay, george butlin, george baxter, f.s. midgley, j.b. gray, w. kerr, a.j. dunlop, h. ernst, w.w. anderson, f. cleary, school councillors, staff, blacksmithing, carpentry, fitting and turning, moulding, sheet metal, mathematis, english, science, art, 1914, h v mckay, sunshine harvester, 2000 pounds and land donated, wounded returned soldiers, 1919 ued as hospital, influenza epidemic

A blowtorch or blowlamp is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. The blowlamp is of ancient origin and was used as a tool by gold and silversmiths. They began literally as a "blown lamp", a wick oil lamp with a mouth-blown tube alongside the flame. This type of lamp, with spirit fuel, continued to be in use for such small tasks into the late 20th century. In 1882, a new vaporizing technique was developed by Carl Richard Nyberg in Sweden, and the year after, the production of the Nyberg blow lamp started. It was quickly copied or licensed by many other manufacturers. Carl Richard Nyberg (May 28, 1858, – 1939) was the founder of Max Sievert’s Lödlampfabrik, then one of the largest industries in Sundbyberg, Sweden. After school he started working for a jeweller and later he moved to Stockholm and worked with various metalworks. 1882 and set up a workshop at Luntmakargatan in Stockholm making blowtorches. However the business didn't work well because it took too long to both manufacture and sell them. In 1886 he met Max Sievert (1849 - 1913) at a country fair and Sievert became interested in Nyberg's blowtorch and started selling it. In 1922 the company was sold to Max Sievert who continued to own it until 1964 when it was bought by Esso. The blowtorch is commonly used where a diffuse high temperature naked flame heat is required but not so hot as to cause combustion or welding: soldering, brazing, softening paint for removal, melting roof tar, or pre-heating large castings before welding such as for repairing. It is also common for use in weed control by controlled burn methods, melting snow and ice from pavements and driveways in cold climate areas, road repair crews may use a blowtorch to heat asphalt or bitumen for repairing cracks in preventive maintenance. It is also used in cooking; one common use is for the creation of the layer of hard caramelised sugar in a crème brûlée. A brass blowtorch, 'Sievert' with a wooden handleSIEVERTtools, blow torches, blow lamps, welding, brazing, jewellery, cookery, soldering, nyberg carl, sievert max, stockholm, sweden, spirit fuel, kerosene, gas fuel, moorabbin, bentleigh, cheltenham, market gardeners, pioneers, early settlers, plumbing, carpenters,