Items belonged to Wayne William Forbes No 3176337 RAE. Refer Cat No 754 for service history also 2586. Part of an extensive collection including his fathers..1) Wooden stained shield shaped plaque with a Rising Sun badge mounted centre. The badge has been bent into a curved shape. .2) Wooden stained shield shaped plaque with a Royal Australian Engineer plaque centre. Under is a gold coloured scroll with 1 Field Squadron Group RAE SVN. At the top is a small brass plaque..2) Presented to SPR W FORBESmilitary history - army, plaques, rae

This item has been in use since WW2 and has been a critical tool of the Royal Australian Engineers and others in that time.Given the wide range of uses of various gauges of wire to 'hold things together', and to repair maintain equipment, the wire cutter is of high significance as an important tool for a wide range of Service personnel but in particular, for engineers.Iron wire cutter, suitable to cut up to a heavy gauge wire. The item unfolds for usage and folds up when resting.D of D with small indecipherable markings.vietnam, vietnam war, engineers, tools, equipment

Item in the collection re Tom Glazebrook, refer Cat No 4330.2 for his service details. This is an Officer's peaked cap, khaki colour. The brim is also Khaki cotton covered. It has a leather strap sitting on top of the brim. It has the badge of Royal Australian Engineers on it. The badge is copper, but with silver oak leaves around left and right side. Inside is a leather lining around the inside rim. It has a water proof vinyl layer against the interior top,Inside the leather internal rim is "T. Glazebrook 3137211”uniform, hats, tom glazebrook

Various Historical significance.Australian returned from active service badges. 2 x Returned Soldiers and Sailors Imperial League Badges. (1919 - 1947.) 2 x 1971 to 1990 Life Member Badges. Maralinga & Monte Bello Association Badge. Boomerang with Rising Sun badge. Royal Australian Engineers 1930 - 1942 badge. Silver badge "To the Women of Australia. Vintage Turkish Medal. Inscribed To The Women of Australia Crown surrounded by Laurel Leaves with Map of Australia in centre. Returned From Active Service. Two or Three Servicemen shown. RAAF #A1102 - 1942. Boomerang with Rising Sun below Crown. Royal Engineers Badge inscribed "FACIMUS ET FRANCIMUS" encircling GviR in centre Crown over Laurel leaves.

This item commemorates the war in Vietnam (1962 - 1972.) It was donated by Sapper Gordon Skidmore, who served Royal Australian Engineers in Vietnam 1968-69.A 50 cent commemorative coin is presented in a green envelope. Images of a huey helicopeter to the left, an ink stamp of a helicopter with the date of issue, a postage stamp is located on the top right hand side. The coin is located in a plastic cover, to the right of the coin is a sepia photo of a solider looking at a map hanging up. The coin commemorates Operation Overlord. South Vietnam Long Khanh Province, South Vietnam, 5 - 14 June 1971.Operation Overlord/Long Khanh Province, South Vietnam/ 5 - 14 June 1971.commemorative coin, 50 cents, operation overlord, long khanh province, 5 - 14 june 1971, skidmore, 39570, 17th construction squadron, 21 engineer support troop, auspost

Wooden, shield shaped plaque, badge of Royal Australian Electrical & Mechanical Engineers affixedPresentation plate: Presented to 4/19 PWLH Offrs Mess by Capt F J Bell 4 Sep 69plaque, raeme, plaque, raeme

Used in Vietnam 1968-9, by Special Reconnaissance Regiment (SRR) Brian Leonard Start, a National Serviceman in 17th Construction Squadron, Royal Australian Engineers.Silver flip-top cigarette lighter. Has been personalised with the RAE emblem in gold on the front and engraving of serviceman's name, number and year on the back. Stored in original box.Front: R.A.E. VIETNAM, Back: 3791450/SRR START/'68-69r.a.e., bl start, "68-69, special reconnaissance regiment, 3791450, engineers, zippo, vietnam, cigarette lighter

Sapper L S Sempel of Royal Australian Engineers traded an Australian Army shirt for this knife, then used it to probe for mines during his service, 1966-1967.Knife with metal blade attached to a wooden handle and bolt hilt. The handle is made up of six wooden spheres joined to the blade. A wooden bolt secures the spheres.Shelham 4131 Japan inscribed on the knife blade.knife, mines, survival knife, us army kabar knife, kabar, engineer, sapper, vietnam, trade, sempel, ka-bar

1. "AACS" - Australian Army catering Service. 2. "RAE" - Royal Australian Engineers. 3. "A FLD BTY RAA" - Royal Australian Artillery B.C.O.F. Japan 1946-1948.1. BANNER FRAMED, COTTON FABRIC, BLUE BACKGROUND, PALE GOLD COLOURED TASSLE FRINGE, WHITE EMBROIDERED INSCRIPTION, COLOUR PATCH CENTRE, GREY, PALE BLUE AND WHITE. 2. BANNER FRAMED, COTTON FABRIC, MID BLUE BACKGROUND, GOLD COLOURED TASSLE FRINGE, WHITE EMBROIDERED INSCRIPTION, COLOUR PATCH CENTRE, FUSCHIA WITH GREY SURROUND. 3. BANNER FRAMED, COTTON FABRIC, NAVY BLUE BACKGROUND, WHITE COLOURED TASSLE FRINGE, WHITE FABRIC INSCRIPTIONS, COLOUR PATCH CENTRE, RED AND BLUE WITH GREY SURROUND. 1,2,3, Frames - timber, block colour print, glass front, cardboard backing.1. White embroidered inscription. AACS. 2. White embroidered inscription, "RAE/6 Welding PLT/10 Bomb disposal/13th Army Troops/14th WKs PKs/1st AWT/17th CRE/42 & 43 Port Operating/28th FIELD COY" 3. White fabric inscription. "A FLD BTY RAA"/ "345 Aust LAD".military, ww2, japan, banners

Army Jacket Dinner Dress, Lt Royal Australian Electrical & Mechanical Engineers with Insignia (Stored with trousers U112)uniform, c1950, army

standard style of a jacket battle dress from the late 1940s to 1982; it was used for parade dress; this jacket was worn by a warrant officer class 2 of the Royal Australian Electrical and Mechanical Engineers.This jacket has historical significance because it representative of a standard style service battle dress worn by soldiers of the Australian Army Post WW2 until the introduction of the modern polyester cotton uniforms. It is also in excellent condition, which is special considering it's age. Waist length jacket, with two breast pockets either side, collar, olive green, two shoulder patches on both side ones says “Royal Australian Electrical & Mechanical engineers” in Bright yellow/gold writing on a in navy blue shoulder patch; a ranking insignia of Warrant Officer class 2 above the cuff of both sleeves Label located inside the jacket on the right hand side it says “A.G.C.F. VIC 1977 8405.66.025.6423 Size of chest: Size. 109/112PR. Yarra Falls. Batch 21657. Dry clean only Crease upper half of labels only.jacket, jacket battle dress, jacket khaki

Local tailors made these jackets with variations of the city name on the back: Vung Tau, Saigon, Vietnam. This item was purchased and worn by Lance-Corporal Ronald J Stibbe of the Royal Australian Engineers, who served in 1st Field Squadron in Vietnam from 21 Oct 1966 until 10 Oct 1967.Black cotton souvenir jacket with collar and front zip closure. On the back is a map of Vietnam with cities labelled, all in coloured embroidery. Above and below the map is white lettering. The upper sleeves of the jacket are embroidered with a dragon, whilst the front of the jacket features an embroidered tiger head and good luck symbol. It is lined with white silk.Adhesive tag "RJ Stibbe" Embroidered On back - 'WHEN I DIE I'LL GO TO HEAVEN BECAUSE / I'VE SPENT MY TIME IN HELL / SAIGON'. Below the map embroidered in white the lettering, 'VIET NAM - 66 67'.jacket, vietnam, souvenir, embroidered, stibbe, r j stibbe, anti-war, vietnam war, 1200492, bomber jacket

This item commemorates the war in Vietnam (1962-1972). Item donated by National Serviceman Pte DJ Moore, who served with 3RAR in the Army Catering Corps in 1968.Deep blue can with 21 Construction Sq insignia on front. Back of can-Thanking sponsor R.S.L. Seymour/Royal Hotel/ Highland caravan park/ Reunion in Seymour, Victoria/ 25-28 October 2024.21 Construction Squadron Royal Australian Engineers 21 Insignia for Construction Squadron Motto- Up the/ Old Red/ Rooster/ and more piss. / Reverse of can thanking supporters/ RSL Seymour. Vic sub Branch/ The royal Hotel-Seymour/ Highland caravan park/ Reunion in Seymour/ 25-28 Oct 2024.old red rooster, engineers reunion 25-28 oct 2024, seymour, beer can, engineers, moore, 3rar, d moore

This memorial commemorates the historic siege of Tobruk. The memorial is based on the one in the Tobruk War Cemetery, built by Royal Australian Engineers during the siege. That memorial has since been destroyed. The original marble inscription stone was brought back to Australia after the war and is incorporated in the obelisk in Canberra. The memorial was unveiled on 13 April 1983 by the Governor-General of Australia, Sir Ninian StephenThis item is part of a collection of items owned by Arthur lock, a member of the 2/23rd Battalion, an all-volunteer Second Australian Imperial Force which served as part of the garrison during the Siege of Tobruk, then at El Alamein, New Guinea and Borneo. It has particular local significance as the battalion was know as "Albury's Own" because a large majority of the battalion's initial intake of volunteers came from the Albury–Wodonga region. A group of 3 coasters produced to commemorate the unveiling of the Tobruk Memorial in Canberra on 13 April 1983. In top left "CANBERRA TOBRUK/MEMORIAL/UNVEILED 13 APRIL 1983"world war 11, rats of tobruk, tobruk

Royal Australian Electrical and Mechanical Engineers stable belt. Dark blue in colour with red and yellow stripe.Motto on buckle ARTE ET MARTE with badge of RAEME.

White dress jacket for Sergent from Vietnam war. Royal Australian Electrical and Mechanical Engineers RAEME

Typed on back of one photograph, 'Lt. Col Baldwin receiving the key and the certificate of Freedom from the Mayor. Town Clerk, F. Dwerryhouse seated at back. The unit paraded on the reserve at the back of the Town Hall. 27 Mar. 1965'. Written on back of another picture, "Mayor Ben Hubbard handing "Freedom of City" to Capt.. 3rd Div. Engineers'. Last photograph states below it, 'Freedom of the City' on back of same picture, '27th Mar. 65. Mayor (Cr. B.J. Hubbard presenting scroll of Freedom of City to Royal Australian Engineers'. Typed below 11172-2: 1965 Mayor Cr. B. Hubbard presenting scroll qwith Major General His Honour Norman A. Vickery & Major Gen R. J. H. Risson, and handwritten on the reverse: "This is the Scroll presented to the Royal Australian Engineers 3rd Division on 27 March (1965) granting them the freedom of the City of Ringwood. From Left the Mayor of Ringwood (Cr Benjamin Hubbard), The Commander 3rd Division (Major General His Honour Judge Norman A. Vickery) and Major General RJH Risson who represented the Colonel Commandant, Royal Australian Engineers"

Issued as a uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This uniform belonged to CPL K. Howe, the donor providing good provenance. In conjunction with other items of militaria donated by the Howe family. Item can be to tell a story of multi generations of military service of the Howe familySingle breasted hip-height jacket in khaki fabric, fastened with five buttons down the centre of the chest. Two pleated breast pockets with triangular flaps fastened with two buttons. All buttons plastic and khaki green in colour. Jacket is fastened around the hips with a belt, attached on left hand side and buckled in a rectangular metal buckle on right hand side. Both left and right sleeves bear two patches, a double chevron and red rectangular patch rounded to follow the seam of the shoulder, with embroidered text. Navy lanyard looped around right shoulder, held in place by epaulet and tucked into right side pocket. Red patch reads "ROYAL AUSTRALIAN ENGINEERS" Internal left chest label reads "A.G.C.F./VIC. 1981/[broad arrow symbol]/6405.66.025.6408/SIZE OF CHEST/SIZE 99-102R/MACQUARIE 80/BATCH J/DRY CLEAN ONLY/CREASE UPPER/HALF OF/LAPELS ONLY/No. 3144504 [handwritten]/NAME/CPL K. HOWE [handwritten]"jacket, battledress jacket, battledress jacket khaki, royal engineers

Beret, black felt with reinforced black hat band, 2 air vents RHS & back. Silver RAEME (Royal Australian Electrical & Mechanical Engineers) badge in front.costume-male, headwear, military history - army, raeme, passchendaele barracks trust

Copy of framed photograph of World War 2 Australian Army serviceman Lieutenant Edgar Burton Chapman, service number VX43645, who served in the 2/10th Field Company, Royal Australian Engineers. The 2/10th FC was attached to the 8th Division. Chapman later transferred to the 2/12 FC which was in Singapore when the Japanese invaded. Chapman was captured and spent 3 1/2 years as a Prisoner of War in Changi Prison. Chapman was born in Dromana, Victoria, on 21st March, 1914 and lived in Frankston and attended Frankston High School. He trained as a Civil Engineer and commenced work with the British Phosphate Commission in Nauru.

Possibly WW2Royal Australian Electrical and Mechanical Engineers Artificer Badge. Metal badge is mounted through an aluminium metal plate and secured with clipsNil

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. The royal ascent was granted in 1948. The Royal Australian Electrical and Mechanical Engineers (RAEME) is a technical corps tasked with the maintenance of the Army's modern hardware and equipment. RAEME personnel are represented in most Army units. The Royal Australian Electrical and Mechanical Engineers corps motto is ‘Arte et Marte’, which is Latin for ‘With Skill and Fighting’. This item, was presented to the Council of the Rural City of Wodonga in 1978. RAEME has a strong connection with the city of Wodonga through its service and training facilities at the Bandiana base on the edge of Wodonga. A shield shaped plaque carved with the emblem of RAEME corps (The Royal Australian Electrical and Mechanical Engineers corps). The edge of the shield is decorated with carved leaves. An engraved metal plate has been attached to acknowledge the presentation of the plaque to the Council of the Rural City of Wodonga. The rearing horse and chain are symbolic of power under control and the lightning flash, of electrical engineering. The rearing horse also forms part of the crest of the Institution of Mechanical Engineers and, together with the lightning flash, is intended to mark the close relationship which exists between the electrical and mechanical engineers in both civil and military life. The globe is indicative of the impact of engineering on the world generally.Attached to rear of shield "Presented to/The Council of the Rural CIty of Wodonga/ by/ The Commanding Officer and Members of/RAEME Training Centre/ 21 October 1978"raeme, australian army

Possibly used during Vietnam conflict.Empty shell case made into trench art in the form of a bottle opener with a Royal Australian Electrical and Mechanical Engineers badge fixed on the sideOn the base of shell case L C 52..

Newspaper cuttingTyped above and below photograph: "Belle of Belles. Miss Elizabeth Dunn, 17, of Box Hill. One of the first to congratulate her was Miss Pat Yardley, of Ringwood, who was Belle at the Ringwood C.W.A. Ball. - Photo by J. Gallagher. 10/12/1953. Written below- Grand Military Ball held at Box Hill Town Hall by the Ringwood Unit of the 10th Ind. F.D. Sqn. (armed) Royal Australian Engineers."

A cutting from from a Melbourne Legacy President's report showing a photo of Legatee Chas Wilks (President of Melbourne Legacy in 1989). It was collected to be a record of a photo of past presidents. During World War 2 Chas Wilks saw active service in the Royal Australian Engineers in New Guinea and Borneo. He had a career in civil engineering with MMBW. He joined Melbourne Legacy in 1973. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of Legatee Chas Wilks a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.An article with a black and white photo of Legatee Chas WIlks - President 1988.past presidents, chas wilks

Sketch Map of Bulldog-Wau Road New Guinea drawn to scale by 2/1 Aust Fd Coy dated 23.7.43 and signed by soldiers together with related newspaper article. Hand sketched by Peter Muncey VX10042 a Draughtsman who served in the Middle East Ceylon and New Guinea with the 2/2 and 2/1 Field Coy Royal Australian Engineers. The sketch contains 26 signatures including:- S/Sgt Raymond Hector Ibbotson NX14112 who served in the Middle East and New Guinea Lt Col Jack Graham Wilson NX 130646Bulldog Track also known as Bulldog-Wau road was longer, higher, steeper, wetter, colder and rougher than Kokoda Track. In 1943 Australian Army engineers; the 2/1 and 2/16 Field Company RAE, 9th Australian Field Company (AIF), veterans of Syria, Palestine, Egypt, Greece and Crete, the 1st and 3rd Australian Pack Transport Companies and local Papuan labour cut the road with pickaxes and dynamite over a period of eight months. During five months of operations over seventy per cent of the 2/1 Australian Field Company contracted malaria.Seventeen bridges were constructed; mostly single, but at least one with multiple spans. More than two thousand Australian army personnel and over two thousand Papuans and New Guineans were involved during nine months of construction. Thus the road, acclaimed as the greatest military engineering feat ever, was completed and for the only time in history motor vehicles crossed the high rugged mountains of Papua New Guinea. Carved brown timber frame with cream mount containing hand sketched map with soldiers signatures and two newspaper articles.Sketch Map of Bulldog-Wau Road 23.7.43 2/1 Aust Fd Coy Newspaper - Diggers pushed on with pick and shovelbulldog-wau road, map, new guinea, ww2, 2/1 aust field coy