Report - 3 foolscap typed sheets, titled , dated 24 July 1950. Document details the PCC tram for an article describing in detail the tram, the seating, floor, ceiling, strap hangers, PCC equipment, supplied St Louis Car Company, bogies, electrical equipment, controllers, general description, equipment compartments, doors, trolley pole and a list of principal dimensions. Signed A. Stephenson 24/7/50.trams, tramways, pcc, new trams, manufacturing, licence fees, agreements, bogies, controllers

Form - duplicated - "Progress Certificate - Preston Workshops - Form R18", giving a summary of work undertaken by Preston Workshops. Has space for the Electrical Shop, Air shop, Body Shop, Truck shop, and Paint shop. Form used to advise that works car 19 had a loose tyre 2C, advised by South Melbourne Depot 3-12-1970. Tram 19W. Electrical shop cleaned and checked both controllers with dates of test, air shop - air and sand ok, and truck shop put notes in as well, not sure what they mean, though the axle is 33" by Thomson's & Co and it was fitted with GE 241 motors. Noted it was test run 21-12-70. Item was located within Reg Item 3912.trams, tramways, preston workshops, forms, tramcar trucks, axles, wheels, maintenance, advertising trams, tram 19, tram 19w

Letter from Acting Controller of Stores, Victorian Railways to the Rolling Stock Supervisor, Tramway Museum Society of Victoria, regarding patterns for castings used on railway tramcars. Letter dated 4 October 1965. Original letter and photocopy of letter.trams, tramways, rolling stock, vr trams, victorian railways, castings, tramway museums, tmsv

Exercise book with personal notes on tramcar maintenance, operations, recovery etc of C. Willoughby in a Spicers Tudor Exercise book - 64 pages with arithmetical tables on the rear cover. Topics covered: Rail Grinder - details on how to operate and maintain it North Fitzroy Dick Kerr, Clyde, K35 and RC2 Controller sequences and diagrams - notes on testing and faults Buzzer wiring diagrams Maintenance of trams interiors and rooves - items to be checked for Line Breakers Lighting Circuits Compressors Trolley poles etc Air operated doors Re-railing of Maximum Traction trams - 22E ditto for equal wheel bogies ditto when split points Use of false trucks Derailments on the Royal Park line Electrical equipment faults Adjusting Trolley Poles heights and tension Notes on truck types and braking Brake diagram summary, giving specifications and a list of relevant drawings Forms for the insulation testing of the Rail Grinders Checking motor leads and electrical equipment - written on the rear of a St Patrick's Day Procession notice for 1962. Advice from Neil Elfick, 23/6/2018 knew him when the Running Shed Foreman at Kew Depot.trams, tramways, tramcars, faults, controllers, 22e trucks, derailments, accidents, royal park, grinder, notices and information, st patricks day

Report - single foolscap sheet titled "Bridging Transition" describing the electrical circuit arrangements while passing from series to parallel in DC traction tramway motors.trams, tramways, tramcars, controllers, electrical engineering, electrical equipment, motors, electric traction

Report - four pages - stapled in top left hand corner, titled "PCC - by F R Thompson", describing the control systems in a PCC tramcar, eg No. 980. Refers to drawings that are not included. Describes the control circuits, car drive, equipment, electric brakes, emergency dynamic braking, and service braking.trams, tramways, tramcars, controllers, electrical engineering, electrical equipment, motors, electric traction, pcc

Report - seven pages - was stapled in top left hand corner, titled "GE 247 Traction Motors" written by Noel Gipps for the AETA in 1957. Outlines the history of the motor, manufacturer, electric braking and issues, weak filed running, trials by the MMTB on W5 class cars, Westinghouse VA23 system, PCM systems and trials in Melbourne.trams, tramways, tramcars, controllers, electrical engineering, electrical equipment, motors, electric traction, pcc, general electric

Set of four drawings of electrical and brake equipment on VR Tramcars. .1 - No. 1 - Bogie car wiring diagram - shows all equipment including lights, compressors, motors and switches. Has a different lighting circuit for the 52 to 54. 4 copies held. .2 - No. 2 - Air and Brake Equipment (Excluding one-man car) - shows all equipment including wipers, conductor's brake valve .3 - No. 3 - Pneumatic Equipment for One-man car - shows all equipment including door engines, emergency valves, emergency reservoirs, door valves and links to controller. .4 - No. 4 - Pneumatic Door Equipment - cars 52 to 54 - including door controller valve positions.trams, tramways, vr class tramcars, victorian railways, brakes, wiring diagrams, one man trams, air compressors

Instruction - 108 pages + 9 fold out drawings glued and stapled in at the rear + card covers with red cloth binding, rounded right hand edges, centre stapled. Titled "Instruction Pamphlet S-100, Air Brake and Safety Car Control Equipment", published July 1924 by the Safety Car Devices Co. St Louis. Includes the M28 Brake valve. Describes in detail the rules for operation, parts, description, M28 Brake Valves, Maintenance, Practical car tests, hints, defects. The 9 drawings at the rear of the document give detail arrangements of the piping and control equipment. Book scanned into three sections. See also Reg Item 3513 for another similar document.on top of first page "C. Hodgson"trams, tramways, electrical engineering, electrical equipment, air compressors, brakes, instructions, maintenance, controllers

Instruction - 5 sheets or 10 pages titled "Parts of Westinghouse Type 1C Tramway Controllers" style number 15948, catalogue no. 6551A, published may 1913. Gives images and a list of all the parts including smaller images in the controller and their prices along with the part number. Published in the UK by The British Westinghouse Electric & Manufacturing Co. Ltd. London and Manchester.trams, tramways, westinghouse, instructions, maintenance, controllers

Instruction - 24 pages, with two punch holes and stapled on the left hand side titled "Air Brake Safety Car Control Equipment" number 84450.1B, pages 3 to 26. Details the M28 brake valve, sanding features, operation, door and step controllers, check valve, CP-25C air compressor, brake valves, air compressor governors, drawings of piping, maintenance, testing, faults and general operation. See Reg Item. 3478 for another similar document. No details as to who published it or dates.trams, tramways, electrical engineering, electrical equipment, air compressors, brakes, instructions, maintenance, controllers

Set of six destination indicator equipment that was fitted to Z, Z3 and B class trams. .1 - dot matrix type destination sign fitted to the side of a B class tram - set at Preston Depot - serial number 232636 - Luminator type, back cover loose, 180H x 1300W x 100D. See images 3704i1a to e. .2 - dot matrix type route number fitted to the front of a tram, type fitted to B2 class tram, set at 86D, serial number 273644 - Luminator type, marked "163 No", 240H x 350W x 135D. See images 3704i2a to d. .3 - flipper type, side destination type, marked "ex 53" (Z class tram), made in Italy by Boselli has yellow label 37/702S, serial number 40A1603, set to St Kilda Beach and stamped 136 on one flange. 120H x 330W x 165D. See images 3704i3a to c .4 - flipper type, destination box, with markings "B'Wick Flaps", with labels "New" "Universal A flaps" made in Italy by Boselli, serial number 40A6623, set to St Kilda Junc". 210H x 1000W x 1900. See images 3704i4a to d. .5 - flap from an above type box, half of "Richmond" and "South Melb Depot", 970W x 80H. See images 3704i5a to b .6 - controller box, marked "No. 105" on rear, serial number 202311 Luminator, numeric pad, illuminated display and five control buttons made by gulton Luminator division fitted to a B2 tram. See images 3704i6a to b .7 - dot matrix destination sign fitted to the front of a B2 class tram, set to "Not in Service", Serial number 502626 Luminator, 220H x 1300W x 165D, See images 3704i7a to e. Source of items 3 and 4 name based on drawings held by the Museum for the destination signs fitted to Z class trams. Refer to drawing R11-982 as an example. Luminator made by Luminator Technology Group Texas - see https://www.ltgglobal.com/ access 12/7/2019. Imagetrams, tramways, destination indicators, z3 class, transport equipment, z class, b class

Drawing - two A2 sheets, "Tramcar Data", listing all vehicles in use c1984, including A and B class data. Though not numbered similar to drawing X1537 held in the Mechanical drawings. Lists class, numbers, total in service, type, capacity (seated and crushed), Trucks, wheel and truck centres, motors, tare weight, controller, compressor and length over bumpers.trams, tramways, drawings, tramcars, class

Report - approx. 55 A4 photocopied sheets - bound with white comb binding, with embossed leather imitation grey card covers, titled "Symposium 'Electric Traction Systems' ", presented by the Institution of Engineers Australia, Vic Div, Tues 6/5/1975. Contains three papers: 1 - "Electricity of Transportation" - R. G. Chapman, SEC 2 - "Electric vehicles for Street Transport:" - F. D. Snell - MMTB 3 - "Electric Railways" - A. Firth - VR Paper 2 looks at the history of the MMTB system, the W class tram, control systems, lack of new trams in the 1960's, ordering of the Z class tram, its specification and manufacture, 980, 1041 and other forms of public transport on roads - trolley buses, gadgetbahns, and lots of possibilities of new systems including battery vehicles.On rear in ink in top right hand corner "D. W. Lees"trams, tramways, reports, mmtb, tramcars, pcc class, z class, melbourne, history, trolley buses, electrical engineering, controllers

Colour slide, Kodak, white cardboard of track reconstruction in Flemington Road, North Melbourne 19/12/1959, over Grattan St, with trams 935 and 927 in the far distance. Note the wood block construction, the austerity bus, the hotel in the far distance on the corner of Elizabeth St and Peel St, the trees are blocking the view of the former Haymarket, the temporary track relaying and the lone watchman or "traffic controller". Slide Number K(l)(289)Extensive handwriting on rear in ink and that it was photographed at 1/60 f5.6.trams, tramways, flemington rd, grattan st, trackwork, track construction, tram 935

Instruction - approx. 250 A4 photocopied sheets, loose, titled "General Electric Equipment for Double End Presidents' Conference Committee Type Car furnished Melbourne and Metropolitan Tramways Board Australia". Has a table of contents. Gives a very detailed description of the equipment's, its maintenance including trouble shooting. Has some duplicate copy of static tests at the end of the document.Has the stamp of "Electrical Running Sheds Branch Hanna St" on some sheets.trams, tramways, pcc, controllers, general electric, tram 980

Photocopy of a letter (four A4 pages of an unknown number of pages), from the English Electric Co Ltd of Bradford dated 29/6/1938, addressed to the MMTB via Heap and Ryley London. Follows the visit of Mr Bell and Mr Spencer to the Bradford works. Has notes on Tramway Motors, controllers, notch regulators, multi-notch remote control, trolley slider heads and Bow collectors. Refers to enclosures but not found with the document.trams, tramways, english electric, motors, controllers, trolley poles, bow pantograph

Report - "W class Tram Modernisation" from the ttmrail webpage, 2 A4 sheets stapled in top left hand corner, details the changes - DC Traction chopper system, controllers, inverters, controls, drivers cabins, lighting and drivers and saloon heating systems.trams, tramways, ttm rail, braking, electrical equipment, electrical systems, electrical engineering, controllers, w class

Lists provide information about the type of equipment fitted to W2 class trams 1 - "Trams fitted with D K (Dick Kerr model) controlleres - dated 15/7/1963 2 - "Class W2 cars with 28" dia wheels" - 11/7/1963 3 - "Roller Bearing trams" - listed by motor type, giving the number armatures for GE 288, BTM 265, MV 101 and MV 101 BR motors - These trams were fitted with roller bearings on their armatures = dated 14/10/64. Yields information about the equipment fitted to W2 class trams during the mid 1960sSet of lists - carbon copies on either foolscap or quarto paper.trams, tramways, tramcars, motors, wheels, armatures, dick kerr, w2 class

Research Report- 3 A4 sheets, stapled in top left hand corner, titled "The Melbourne L class cars", detailing the history of the L class tram from the time of ordering by the PMTT to 1981, including changes to the body and their use. Includes notes on the motors, trucks, controllers. Written by R P Baird?Marked "draft" in top left hand corner and "R. P Baird" in top right hand corner.trams, tramways, pmtt, l class, tramcars, mmtb

The photographs show SW6 tram 867 derailed at the Riversdale Road level crossing on 22/10/1976. The tram ran out of control in Riversdale Road due to the compressor not being turned on before running out to take up a Wattle Park run. This event resulted in trams being rewired so that power to the controller could not be obtained unless the compressor had been turned on. An extract from Electric Traction magazine, Nov. 1976 has been imaged. Tram 331 would have been used in rerailing. See item 7368 for The Herald report of the date.Yields information about the 1967 derailment of tram 867,Set of four Black and White photographs - printed on plain paper and digital copy of a news item.tramways, trams, mmtb, tram 867, rivesdale road, level crossings, derailments, accidents, compressors, tram 331

Photographs show the ASEA built control equipment of a Z class tram. 1 - Drivers control stand showing the foot pedals and switches with the ASEA and Comeng names on the panel. 2 - the driver's controller with the cover removed showing the various parts and linkages - photographed at the factory. 3 - Tramiac control cabinet with a technician showing one of the components or cards - see item 6140 for more details.Provides information and detail about the Z class driver's control equipment.Set of three black and white photographsHas MMTB stamp and stamp of R T Grigg of NZ. on rear.trams, tramways, new trams, comeng, z class, asea, controllers, mmtb

"R10-495 - Rolling Stock Data" dated 11/5/1965 details the tram fleet of the MMTB at the time - listing class, Tramcar numbers, No. in Service, type, capacity seated and crush loading, trucks, wheel and truck centres, motors, Tare Tons, Controllers, Compressors, and length over bumpers. No heritage trams at the time included. The drawing number determined from the MMTB drawing Registers. Signed by F Kirby.Yields information about the MMTB tram fleet in 1965.Photocopy of drawing "R10-495 - Rolling Stock Data" sheetmmtb, tramcars, tramways, data sheet, rolling stock

Folder - blue covers, foldback clips containing technical information on Metropolitan Vickers, "Cam Operated Contact Type Tramcar Controllers" dated July 1936, and given number Q.69975. Gives a general description of the equipment, sizes available, types, small and large controllers, enclosures, regenerative controllers, circuit breakers, notching regulator, air brake attachment and line switch attachment, along photographs of the equipment, construction specifications, for the OK38B. Also includes outline drawings. Folder includes four folder blueprints of wiring diagrams - note these have not be scanned."Spare / 102" on front cover in ink and date stamp "2 July 1936" on many of the documents.trams, tramways, controllers, metropolitan vickers, tramcars

File containing correspondence between the MMTB Chief Engineer Mr. Strickland and various companies, including Railless Ltd, Australian General Electric, English Electric / Dick Kerr and its UK consultants Heap and Digby between the period August 1922 and January 1923. Includes drawings, technical specifications and a book titled "AEC Railless Trolley Bus Specification", date stamped 15/8/1922. For a scan of this document see htd535-trolleybus.pdf (imaging not working correctly for this database as at 9-8-14) For a listing of the contents of this file and of Reg Item 535, see Related Documents - htd535-536list.pdf Item 535 - Trolley Buses Listed from top of file, in order found. Letters generally to/from MMTB Chief Engineer. Date Type, contents and notes 18/11/1922 Letter to Metro Vickers from Chief Engineer re Railless trams 12/1/1923 Letter to Aust GE re railless trams Not likely to proceed at this time. 11/1/1923 Letter from Aust GE Co. providing photographs, drawings, BTH, pamphlets, and general information. Includes photo of Tee-side trolley bus No. 17. No other papers with this item. 6/9/1922 Letter to Aust. GE asked for particulars and drawings of motor omnibuses These three items pinned together. 5/9/1922 Letter to Chief Engineer from Aust. GE provided up to date figures on BTH Railless vehicles. These three items pinned together. 31/8/1922 Letter to Aust GE returning folded of data in relation to petrol and petrol electric cars. These three items pinned together. 24/10/1922 Letter to Heap & Digby, thanks for information, but unlikely to use trolley buses due to poor road conditions where they could be used in terms of revenue. 14/9/1922 Letter from Heap & Digby, inclosing photos of Railless Ltd vehicles supplied to Bloemfontein South Africa and testing. These two items clipped together with drawing No. SK 14-8, showing Mexborough gradients. 28/8/1922 Letter from AEC to Heap & Digby re trolley buses, construction costs and practicality of shipping these to Aust. Includes the Mexborough test results. These two items clipped together with drawing No. SK 14-8, showing Mexborough gradients. 3/8/1922 to 31/10/22 Correspondence between MMTB and H&D regarding the Bloemfontein vehicles. Pinned together. 17/11/1922 Letter from Metro Vickers to MMTB providing details (no photos or drawings) of trolley buses – four pages. 18/1/1923 Letter to H&D thanking him for information and a paper ready by a Mr. Munro. 31/8/1922 Letter to Metro Vic – Melbourne asking whether Westinghouse had developed standard lines of motors for railless cars. 4/10/1922 Letter to Aust GE thanking for info. 2/10/1922 Letter from Aust GE providing two cuttings about railless vehicles in Birmingham and the cost of tram track construction. Papers Contained within a green strip of cloth. 26/9/1922 Letter from H&D providing info from EE – Dick Kerr Preston works equipment used by Railless Ltd. EE Specification for DK 26B Trackless trolley motors 18/9/1922 Letter from EE to H&D providing info on 20HP motors, 40HP, and other information. Blueprint – drawing 2810 – DK 26 Motor Performance curves for above motor Blueprint – No. 1312D – controller diagram Pamphlet – EE – tramcar Type D automatic circuit Breakers. Publication No. 230, dated 9/1920. Ditto, Form A, drawings No 3565, 1/1/19. Performance curves – blueprint – Type DK85A Blueprint – 4449 – outline of controller DK, Type D, form B. Blueprint – P2002M034 – DK85 Motor. EE specification for Traction Motor DK85 Modified from a tram motor. EE blueprint P2102F021, traction control wiring for form D controller. EE blueprint P2103F033 – outline of controller type SE1, form C and D. EE blueprint P2102Z011 – wiring diagram for type SE1 form controller. Performance curves for DK85A motor. EE blueprint – P2102F025 – diagram of connections (wiring) for Type SE1, form D controller. Blueprint – EE drawing – P2002M036 – DK85 motor with ball bearings. Single documents. Date Type Notes 27/9/1922 Letter to H&D acknowledging AEC Trackless trolley bus specification. 15/8/1922 Letter from H&D forwarding above specification String bound book – AEC Railless Trolley Bus Specification – stamped 15/8/22 Scanned as a separate document. 4/9/1922 Letter from Metro Vic. Melbourne advising that they have no information on Westinghouse Motors for use in railless cars, but seeking same.trams, tramways, trolley buses, melbourne, mmtb, aec, heap and digby, english electric, railless, dick kerr, general electric

File containing correspondence between the MMTB Chief Engineer Mr. Strickland and various companies, including Railless Ltd, Australian General Electric, English Electric / Dick Kerr and its UK consultants Heap and Digby (H&D) between the period August 1922 and August 1936. Includes drawings, technical specifications, some of which are duplicated in the Reg Item 535 file. For a listing of the contents of this file and of Reg Item 535, see Related Documents - htd535-536list.pdf Item 536 - Trolley Buses Listed from top of file, in order found. Letters generally to/from MMTB Chief Engineer. Date Type Notes 7/8/1936 Letter from TE Barnes – re Bremen Germany Steam Omnibus. Three pages. On foolscap paper – rest quarto. Has been damaged. 3/2/1926 Letter from Bruce Henderson re transport in the Glen Eira Rd area – poor private bus. 25/10/1925 Letter to G. Higgins, regarding a paper he had presented and printed in Australian Municipal Journal about transport around Melbourne, predicted the demise of trams, trains. Notes Spencer St bridge. Copy of paper is pinned with letters. 28/819/22 Copy of letter to H&D from AEC (see above) Includes the Mexborough test gradient drawing. Undated Pamphlet from Railless Limited about Birmingham’s new trolley buses. 16/3/1923 Extract from Electric Railway and Tramway Journal – wages of trolleybus drivers not getting paid extra in Bradford. Two copies pinned together. 9/4/1923 Letter from H&D re pamphlet exchange You should have had it! 23/2/1923 Letter to H&D asking for information. Has a note re the Board’s attitude towards motor buses. 28/8/1922 to 24/23 Series of letters pinned together with L. de Koenneritz regard trolley buses and Paris. Noted that the MMTB did not have the legislative power to run trolley buses. 15/2/1922 to 10/4/23 Series of letters pinned together with the Aust. GE regarding trolley buses and references to their operation in journals. 10/1/1923 Letter from H&D re request for information on driving gear of Railless Ltd. vehicles 23/2/1923 Letter to H&D re above. 23/2/1923 Sheet of paper on “Steads Review” paper – pamphlet not yet to hand. 8/11/1922 to 10/1/1923 Series of letters with H&D pinned together asking for Railless driving gear – reluctant to provide. 26/9/1922 Letter from H&D, with copy of letter from English Electric enclosing materials regarding Trolley Bus equipment. Note much of this material is the same as that in Reg Item 535 contained within the green cloth tape. Performance curves for DK 26B motor Blueprint – 4449 – outline of controller DK, Type D, form B. Specification for DK 26B trolley motor. Blueprint – drawing 2810 – DK 26 Motor Blueprint – No. 1312D – controller diagram Pamphlet – EE – tramcar Type D automatic circuit Breakers. Publication No. 230, dated 9/1920. Ditto, Form A, drawings No 3565, 1/1/19. Performance curves for DK85A motor Blueprint – P2002M034 – DK85 Motor. EE specification for Traction Motor DK85 Modified from a tram motor. Blueprint – EE drawing – P2002M036 – DK85 motor with ball bearings. EE blueprint P2102F021, traction control wiring for form D controller. EE blueprint P2103F033 – outline of controller type SE1, form C and D. EE blueprint P2102Z011 – wiring diagram for type SE1 form controller. EE blueprint – P2102F025 – diagram of connections (wiring) for Type SE1, form D controller.trams, tramways, trolley buses, melbourne, mmtb, aec, heap and digby, english electric, railless, dick kerr, general electric

Forty Eight page, side staple book within blue Rexene covers. Titled "Melbourne and Metropolitan Tramways /Electric System /Instructions to Drivers in Electric Car Operation" Dated 1960. Printed by Sands and McDougall of Melbourne. Has their logo on the rear cover. The first sheet was a tear off signature sheet, recording issue of the book. Has number "2681" stamped in the top right hand corner of page 3. Provides in a Q & A format, instructions to drivers in electric car operation, photos of various types of controllers, an A.B.C. for tramways drivers - "always" points to remember and has a reference index. 2nd copy - No. 2928, scanned as a pdf.Red marks against various questions in indelible red pencil.trams, tramways, mmtb, drivers, training, instructions, motormen

Illustration of Driver John (Jack) O'Callaghan and a conductor at a terminus or short working with tram W 342. Has the dates regarding the tramcar's working life on the top of the illustration. Advised by Donor that Jack was a "tram employee" between 1919 and 1922, a Gripman - 1924 - 1925 and a Motorman 1928 - 1931. After that he was a signalman. The photo was possibly taken at an opening of new track event. Scanned from an original photograph by the donor and sent to the depot when visiting about organising a tour. Tram crew in full uniform of the era, driver holding the controller and brake handles. Conductor with ticket bag etc. In 1927 the tram was based at Essendon Depot - see Reg item 800.trams, tramways, motormen, conductors, w class, tram 342, uniforms