Rock formation is called " The Woolpacks " and was located on the Wonderland Track at the top of Silent Street -- however on a Broadbent map of the Grampians no.205 this formation was called the " Wool Sacks " ; and the "Woolpacks" was shown on the map close to Venus Bath.Photo shows distinct slabs of rock balancing on each other. Three people appear in the photo -- a man with a boy and a woman. All three are wearing hats. A large rock outcrop can be seen on right of photos -- trees can be seen on left.The Wool Packs F5030scenery, wonderland range

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re-cycled remaining the property of the manufacturer. History of Cohn Bros., Bendigo & Swan Hill.Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle. Bottom half has straight sides. The top half tapers to the top where a metal crimp fits over the lip. Manufacturer's name is embossed in print in block letters with its logo just above halfway from the bottom. At the base on the sides is embossing in capital letters around the circumference. The base is embossed with the crown seal of AGM.On 1 side half way up is embossed - Cohn / circle with CB inside around top of circle is Bendigo and around bottom of the circle is Swan Hill / Bros.is on the other side of the circle. - On the other side is embossed - The property of the Cohn Bros. Vic. Bry. Co. Ltd. Bendigo & Swan Hill. At the base - F1449 AGM (crown seal) M 2glass, bottle, domestic, household, drinks, lemonade, cohn bros., swan hill, bendigo

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of R.J. Hadden's company in Benalla.Historical: Change of bottles - shape, glass, stopper. embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle heavily embossed. It was used for lemonade. It has straight sides that taper towards the opening two thirds of the way up. On 1 side the company's logo forms a circle with the word 'lemonade' embossed horizontally inside the circle. On the other side, at the base, are 2 lines of embossing.R. J. HADDEN - moon shape across the top forming the top of a circle with BENALLA completing the circle below. LEMONADE is embossed horizontally inside this circle. On the other side of the bottle: 'This bottle is the property / of R.J.Hadden, Benalla.' Base: lemonade, benalla, bottle, drink, r.j.hadden, soft drink

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. the shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of Murray Brewery, BeechworthHistorical. Change of bottles - shape, glass, stopper, embossing, use. Aesthetic. Display showing the embossing & shape especially if in good condition.Clear glass bottle. Embossed print in capital letters, around half of the circumference, one third of the way down from the top between the 2 longitudinal joins. The bottom half has straight sides and the top half tapers to the top where a metal crimp fits over the lip. Around the circumference is embossed print in capital letters. The base also has embossing. Crown Seal.Around circumference one third from top: 'Murray B.' Around circumference at base: ' Propetery of Murray Breweries pty Ltd. Beechworth.' Base: F1767 Symbol: 'AGM' and '445' 'M O'beer, drinks, lemonade, beechworth brewery, murray breweries, bottles

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles changed. Bottles were recycled remaining the property of the manufacturer who paid for their return. People collected bottles to return.Historical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic; Display showing embossing & shape especially if in good condition.Clear glass bottle used for beer. Straight sides half way up and then tapered to the opening. 2 longitudinal joins on opposite sides in glass. Lightly embossed MB and underneath it CV in a spade (as in cards) shape two thirds of the way up. Embossed along the bottom and a horse shoe shape at the base.M.B. with C.V. underneath it on the side. Along the bottom: "This bottle always remains the property of / The Manufacturers Bottle Co. of Victoria Pty Ltd." Horse shoe shape on base.beer, bottle, m.b.c.v., manufacturers bottle company of victoria

Flagons were used by chemists to store liquids used for dispensing medicines to customers. Chemists made / mixed the medicines on their premises.Historical: Used in the Kiewa Valley showing change in the way chemists store their medicines as pharmaceutical companies now produce medicines already mixed. Aesthetic: Display - shape & in good condition.Clear brown glass flagon with straight sides two thirds up from the base. It tapers into the neck, and comes out over a lip, then in again and up to the opening. Screw top below on which 2 twin glass handles are attached. It could have been used by a chemist in his dispensary eg. to store sulphuric acid. The glass is joined longitudinally on each side.3 numbers or letters on base (too small to read)chemist, medicines, flagon, spirits

Historically this item represents women's fashion in the 1920s to 1950s. As the material used in the construction is not of a high monetary value it can be assumed it was a day to day working woman apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important within the regionThis item is a reflection of both the fashion mode of the 1920s to 1950s when long hair needed to be controlled by hair pins rather than later manufactured hair sprays. It is also an example of society's mores of tidiness and quasi religious beliefs of covering the hair and head when outdoorsThis long hat pin is adorned with a flat, oval-shaped, piece of black plastic. A raised pattern of small distinctively dome shaped molded plastic infill together with three larger shaped domes. Identical to KVHS 0361costume, female head wear, accessories hat pin

Historically this item represents women's fashion in the 1920s to 1950s. As the material used in the construction is not of a high monetary value it can be assumed it was a day to day working woman apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important within the regionThis item is a reflection of both the fashion mode of the 1920s to 1950s when long hair needed to be controlled by hair pins rather than later manufactured hair sprays. It is also an example of society's mores of tidiness and quasi religious beliefs of covering the hair and head when outdoorsThis long hat pin is adorned with a flat, oval-shaped, piece of black plastic. A raised pattern of small distinctively dome shaped molded plastic infill together with three larger shaped domes. Identical to KVHS 0360costume, female head wear, accessories hat pin

Historically this item represents women's fashion in the 1920s to 1950s. As the material used in the construction is not of a high monetary value it can be assumed it was a day to day working woman apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important within the regionThis item is a reflection of both the fashion mode of the 1920s to 1950s when long hair needed to be controlled by hair pins rather than later manufactured hair sprays. It is also an example of society's mores of tidiness and quasi religious beliefs of covering the hair and head when outdoorsThis hat pin has a shiny black ball head, probably plasticcostume female head ware accessories, hat pin

Historically this item represents women's fashion in the 1920s to 1950s. As the material used in the construction is not of a high monetary value it can be assumed it was a day to day working woman apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important within the regionThis item is a reflection of both the fashion mode of the 1920s to 1950s when long hair needed to be controlled by hair pins rather than later manufactured hair sprays. It is also an example of society's mores of tidiness and quasi religious beliefs of covering the hair and head when outdoorsThis hat pin has the letter "J" as its head.costume female head ware accessories, hat pin

Historically this item represents women's fashion in the 1920s to 1950s. As the material used in the construction is not of a high monetary value it can be assumed it was a day to day working woman apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important within the regionThis item is a reflection of both the fashion mode of the 1920s to 1950s when long hair needed to be controlled by hair pins rather than later manufactured hair sprays. It is also an example of society's mores of tidiness and quasi religious beliefs of covering the hair and head when outdoorsThis hat pin is adorned with a black shiny plastic "tear drop" shape head on a long shaft This is identical to KVHS 0366costume female head ware accessories, hat pin

Historically this item represents women's fashion in the 1920s to 1950s. As the material used in the construction is not of a high monetary value it can be assumed it was a day to day working woman apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important within the regionThis item is a reflection of both the fashion mode of the 1920s to 1950s when long hair needed to be controlled by hair pins rather than later manufactured hair sprays. It is also an example of society's mores of tidiness and quasi religious beliefs of covering the hair and head when outdoorshis hat pin is adorned with a black shiny plastic "tear drop" shape head on a long shaft This is identical to KVHS 0365costume female head ware accessories, hat pin

The construction of these boots suggests that it was not purchased locally or from any large town. It may have been introduced by a wandering caravan trader in clothes and shoes. In this era of rural development shoes, especially children footwear, were regarded as a longer term requirement that only required the soles and heels to be replaced. Multiple shoe types were not common only basics that could be handed down. The policy of one main work/play shoe and one church shoe (special occasion) was the norm at this point in history.Worn by Everil Fisher (girl) at Dederang in 1880. They have 'copper toes' and are 'Hob Nail' These items although very basic were what the region required and was applicable to all levels of society at this time. Durability and no fashion infiltration from larger cities resulted in a spartan attitude to basic living requirements. The rural regions of this area were more in focus to the character of the person rather than what was worn. The personal interactions of everyone in the region were more "true blue" than that of the cities. The concept of "mate-ship' far outweighed the type of fashion being wornBrown/Black ankle high boot for child age 4 (approx). Tongue and six eyelets with broken leather laces. Hob Nail visible on soles and heel. Copper Toes. costume, children's footwear, boots, anklets

The Bogong Village was originally constructed (1937-1940) by the State Electricity Commission to house, engineers and construction workers working on the Kiewa Hydroelectric Scheme. These workers were initially settled in 26 houses and were mainly of European heritage. At the completion of the scheme, in the 1960's, the village was opened to public/tourism use. This photograph shows the village before beautification for tourism was introduced and "bare bones" homes and village usage existed.This photo clearly presents a period of restricted human occupation of a very fragile Alpine environment(up to 4000 workmen involved). This was the beginning of a planned and controlled form of sustainable tourist orientated development of the Victorian Alps and high plains region. The Bogong Township was the base camp for workers employed by the State Electricity Commission. After the construction phase was completed, the planning and controls originating from this period have been modified to allow a greater public access of this unique environment.Photograph of a framed glass enclosed black and white photograph of the Bogong settlement Paper details "KodakXtraLife paper" on back of photo. bogong village, bogong township, sec alpine constructions, hydro, kiewa scheme

As part of the push to cut electricity costs and diversify supply, the Victorian Government (circa 1930) implemented the conversion strategy from mainly brown coal supply to hydro - electricity. The Kiewa Hydroelectric Scheme became the largest scheme of its kind in the State Of Victoria and the second largest scheme in Australia. This dam was constructed to supply water to feed four turbines (62 mega watts) at the West Kiewa Power Station. This was at the forefront of sustainable "Green" energy. Costs associated with power supplies is still a major incentive of governments, however environmentally friendly alternatives such as wind and nuclear have also made inroads. The Kiewa valley and its surrounding alpine catchment were looked at(Victorian State Government), from the beginning of the twentieth century as a source of alternate power for an every increasing demand for electricity by growing population and heavy industrial ares within Melbourne City and State regions. Construction of dams, such as Clover Dam provided the large quantity holding areas of water required to turn the turbines at the various power stations to provide the electricity needed. The impact of these controls by moderating water run off from the alpine regions is beneficial in reducing flooding from thawing of snow on the alps. This by-product allows agriculture and grazing to be less vulnerable to seasonal flooding thereby resulting in a more stable annual production level.Reproduction (scanned) of a black and white photo of Clover Dam circa 1940. The paper used is KodakXtraLife II paperThe reverse side of photo " KodakXtraLife II paperdams, pondage, hydro electricity, power stations, clover dam, secv

This item(razor) was used by men, only before fashion dictated that women should shave their legs and underarms. There is information that this razor was first used circa 1922 and it lasted up until circa 1958. It permitted the user to have a compact shaving apparatus at hand in any environment. It provided a safe and easy way of sharpening the more permanent blade. This type of razor replaced the straight, open, or cut-throat razors. The mobility of this item was further enhanced by Gillette with their double bladed disposable razor. Time taken(shaving) and costs involved where crucial factors in the ever growing pace of domestic lifestyle in the post 1920s.This historical item presents that, even though the Kiewa Region was an inland rural settlement which in the 1920's was not as close to "modern" fashions and "gadgets", the basic living conditions where still maintained at city levels. This particular razor was in its heyday a sophisticated safety razor and brought down the demand for the services of the "professional" barber(shaver). One of the problems of the superseded straight razor was the high levels of cuts and nicks to the face. As this particular razor was fairly expensive it would have been used by men who were in the middle to upper socio-economical position in Kiewa Valley before the late 1950'sThis item is a Sheffield steel(stamped inside) metal box(Viscount model) containing a red leather fine shaving strap and in its lid a grey honing stone. Both bottom and top lids are removable to allow for replacements of strap and stone. On the bottom lid appears "The Whetter" trade mark, registered in the U.S.A. in 1950.Three bands of a Greek key pattern has been pressed on the lid. A circled identification inscription. " ROLLS RAZOR Ltd, MADE IN ENGLAND" and patented information appears within this inscription. "Patented in England and Abroad. English patents numbers 467383. 284428. 242718. 242717" On the outside of the base lid within a circle are "ROLLS RAZOR" and the sketch of a long haired naked man (side view), crouched, with both hands stretched forward operating the razor. On a slab underneath are the words "The Whetter"safety razor, non disposable, men's shaving implement

Most likely the Eltham Springtime Fair run by the Eltham Methodist Ladies Guild and held in the Methodist HallReproduction of black and white photographeltham fair, festivals, eltham, nation, squire, boyd, edwards, carroll, battye, brown

One phase of the Papuan campaign as seen by the camera of George Silk a department of Information photographer, 194240 Page Pamphlet with black and white photograph on front cover of Cpl. F.R.Smith of Queensland, with his tommy gun near Gona Front line.Official War Photographs of the Battle for Australia

This is a book given as a prize to Allan Scarfe in 1942 when he was in Form One at Warrnambool High School. Allan Scarfe, spelled ‘Alan’ in the book inscription, died in 2016. He was a teacher at Warrnambool High School/College for a great number of years and was an author of note. He wrote several works of non-fiction in conjunction with his wife, Wendy, and several novels, mostly crime fiction.This book is of interest because it belonged to Allan Scarfe, a resident of Warrnambool for many years, well-known as a teacher and a writer. It is also of interest as an example of the type of reading material favoured by young boys in the 1940s. This is a hard cover book of 224 pages. The cover is blue with black print on the front cover and spine and a sketch of a sailor on the spine. The dust cover is multi-coloured with sketches of scouts on the front cover and on the spine. The dust cover is ragged at the edges and torn at the bottom part of the spine. The dust cover also has lists of books published by Blackie’s Books. The book has several black and white plates scattered throughout the pages. The inscription on the first page is hand written in black ink. ‘Form 1, Warrnambool High School, 1942, Prize awarded to Alan Scarfe for 7th in Form, gift of Mr G.W. Clarke, R.W.Andrews, B.Sc., B.Ed. Headmaster.’ allan scarfe, warrnambool high school

UnknownLight Weight bomb is made from 3 parts. The cylinder head section made of light steel screws onto the main body which is Aluminium and has a cylinder shape and screwed to the body section is a tin fin sectionSome what appears to be Japaness writing on the heads sectionlight weight bomb ww2

This kit bag belonged to Keith Litchfield Arnel. Born in Kensington on 23 August 1910, and enlisting in Melbourne at the age of 33 on 14 July 1944, Keith Arnel served in the Royal Australian Air Force. At the time of his discharge, Keith Arnel had become a Flying Officer with the Air Force Headquarters Telecommunications Unit. Keith Arnel had two service numbers, VX68230 and 129880.Blue-grey kit bag, cylindrical in shape, constructed of one circlular piece at base with rectangular piece forming sides. Open at one end and fastened with a cream cord drawstring threaded through metal eyelets and fastened with a brass D shaped ring threaded through two eyelets. Inscriptions in cream-white paint on side of bag. One D ring attached to the circular base, possibly for the purpose of attaching a strap to form a duffle bag.Inscribed on side of bag “K.L.ARNEL/R.A.A.F./129880”kit bag, duffle, luggage

This skirt belonged to Joan Elizabeth Peck who served with the Royal Australian Air Force in the Second World War. Joan was born on 27 July 1919 in Acton England and enlisted in Echuca on the 6 January 1943. At the time of her discharge from the RAAF in 1945, Joan was serving as an Aircraftwoman with the 2 Air Observers School in Mount Gambier. Throughout the war, the Mt Gambier base operated under the Empire Air Training Scheme.This skirt was donated by the owner, Joan Peck, and has significant provenance. The inscriptions throughout facilitate significant research ability, though records are not publicly accessible and digitised at this time. Joan Peck’s uniform is also significant as an item of social history, revealing the role of local women in the home front war effort. Light khaki coloured skirt in cotton fabric. A-line skirt constructed of four panels with two darts on the back and two pockets on the front (as per photograph in Supplementary File). Side fastening on the left side with a series of four steel hook and eye fasteners. Two fasteners on the back waistband which are tightened by pulling through two steel rings. Peach-cream coloured bias binding on interior of hem. Label attached to the interior waistband of the skirt back, to the left and right of which is a handwritten inscription.Waistband label reads: “V298/MADE IN/AUSTRALIA/1942/SIZE PECK” Inscription handwritten on waistband interior: “105135.” To the right of the interior label: “J. E. PECK”skirt, uniform, second world war, royal australian air force, world war ii, women

This RAAF uniform is believed to have belonged to Flying Officer Russell Miller, the son of William and Muriel Miller of Warrnambool. Russell Miller attended Warrnambool High School and worked for the Warrnambool City Council before enlisting in World War 11. He was killed in flying operations over Germany in 1944. Died 28 Sept 1944. Remembered at Rheinburg War Cemetery, Nordrhein-Westfalen, Germany. More info @ https://cwgc.org/find/find-war-dead This uniform is a poignant memento of one Warrnambool's brave heroes of World War 11.1 The jacket is made of navy blue wool with a rever collar, four front pockets, eight buttons with air force insignia and navy cloth lining. The two sleeves have metal insignia and black and cream braiding. Above the front left pocket is a stitched blue and white applique. The jacket has a cloth belt with a rusted metal buckle. .2 The trousers are made of navy blue wool with two pockets, a buttoned fly and there are six buttons evenly stitched around the waist band. There is also a metal clasp on the waist band. RAAFraaf, flying officer russell miller, raaf uniform 1940's

Monochrome photograph of Emily Ogilvy (nee Stoddard) in nurses uniform, mounted on cardboardEmily Stoddard Ogilvy Ethel Ogulvy

Painting of five ships at sea, one in foreground is manned. Framed using a small replica life bouy; two crossed flags top centre, one Union Jack flag mid left, one British Naval flag mid right, title 'Oyster Dredging' lower quadrant.OYSTER . DREDGING paintings, decorative life bouys, oyster dredging, fishing, harvesting

Used in the Orbost district prior to electricity being connected (early 1960s). Used for ironing clothes.This is an example of a domestic appliance commonly used before electricity connection was widespread.A metal iron enamelled in blue colour, with a silver coloured fuel reservoir shaped like a bowl. This most likely stored Shellite which was the fuel to heat the iron. The handle is also blue and made of wood. iron shellite-iron clothes-iron

A set of collars, possibly worn during the 1920s-1950s period, wearer unknown. A detachable collar is a shirt collar separate from the shirt, fastened to it by studs. The collar is usually made of a different fabric from the shirt, in which case it is almost always white, and, being unattached to the shirt, can be specially starched to a hard cardboard-like consistency. The popularity of detachable collars and starched collars in general began to fade in the 1920s and 30s as men’s clothes became more comfortable.These items are examples of men's clothing from the first decades of the 20th century when men wore more formal daily attire. A set of four white men's collars of assorted sizes, made from stiffened fabric.Cremorne Collar Company, Melbournemen-collars male-apparel

Belonged to Marjorie McKeown (need Ford)A brassiere of apricot / pink cotton fabric with metal suspender clips around the bottom and 18 small metal clasps down the back. Size 42. La Mode (manufacturer) Size 42womens-corsetry womens-undergarments fashion