Standard summer dress shirt indicative of that worn by sailors of all rank post WWII until present time. Summer, tropical dress shirt white worn by from post WWII to present day. Shirt was worn on service duty by CPO (R’td) Craig Duff; This style shirt is still in use by the RANShirt Service Dress White short sleeved with two breast pockets; Insignia embroided Naval Police Coxswain on the right sleeve; shoulder patch embroided in navy blue cotton with the word Australia embroided on both sleeves, Insignia Rank Petty Officer, buttoned down the front.Inside seam right hand side there is laundry instructions label measuring 45mm x 50mm; Collar label 45mm x 68mm/ DNJ9CC/ July 2007/ 8405-66-051-8334/ SIZE 40,/ NAME/ Service No., 65% polyester/ 35% viscose Rayonshirt short sleeved white, shirt white

Russell H Whitehead serve in 1 Field Regiment Royal Australian Artillery in Vietnam between 22/05/66 and 27/03/67 Plastic Framed Certificate of Vietnam Service Vietnam War Service / Private / Russell Henry WHITEHEAD / Service No: 3411520/ Service: Army / Service Between 22/05/1966 and 27/03/1967 /Total Days: 310 /Unit: 1st Field Regiment / Australian Coat of Arms bottom left hand corner Australian Government/ Department of Veterans Affairs/ on centre left sign Rising Sun Emblemvietnam, 1 field regiment, first field regiment, royal australian artillery

Khaki coloured dress trousers with pressed seam running vertically down front and back of each leg. Two hip pockets, one on each side, with rear pocket on right side fastened by plastic button; additional pocket sits in waistline on right side. Trousers have seven loops for a belt and smaller loops for metal inserts which support a Sam Brown belt. Trousers fastened by a zipper in front and flap which secures with a plastic button on the interior. Spare button is sewn into the interior waistband. Leg hem is reinforced at front and back with strip of synthetic binding, presumably to aid against wear from rubbing on boots. Interior label on left back of waistband reads "DRY CLEAN/REPRESS ON ORIGINAL CREASES/USE DAMP CLOTH OR MEDIUM TO/HOT STEAM IRON/MENDING PATCH ATTACHED" Interior label on right back of waistband reads "ARMY NO/NAME" dress uniform, pants, australian defence force

This a belt which fastens to a Women’s nurses dress of the Royal Australian Army Nursing Corp.The garment was a sealed sample 26 feb 1962. It is unknown when the dress was replaced. It is a representative example of this type of uniform in the period.The dress is in excellent condition.Light green cotton belt with 3 sewn holes ( for fastener) 30mm apart,a gap of 50mm with 3 more holes at one end of belt.At other end a sewn opening of 30mm with another similar opening 70mm from first.women’s, raanc, short sleeve, uniform, dress, royal australian army nursing corp

The Type 62 is a re-badged British Pattern 1907 bayonet. Siam purchased 10,000 SMLE rifles and Pattern 1907 bayonets from Britain in 1919 to equip the "Wild Tiger Corps," royal bodyguard of Vajiravudh, King Rama VI (reigned 1910–1925). The tiger figural on the ricasso is representative of the Wild Tiger Corps. Year 2462 on the Buddhist Calendar corresponds to 1919. SMLE rifles and Pattern 1907 bayonets were taken from British stocks, refurbished by Birmingham Small Arms (BSA), and remarked with Siamese markings. The bayonets were shipped with standard steel-mounted leather scabbards. However, the leather rapidly deteriorated in the tropical climate, so the Siamese made a replacement steel scabbard body to which the original steel mounts were brazed. Sword bayonet for use with the .303 caliber Short, Magazine, Lee-Enfield No. I Mk. III (SMLE) rifle.A tiger head on the left side with some symbolsww2, world war 2, bayonet

This lanyard attaches under the right shoulder epoulette of a jacket issued as a Royal Australian Engineers uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was a standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This lanyard is a component of a uniform belonging to CPL K. Howe, the donor provided good provenance, in conjunction with other items of militaria donated by the Howe family. The Uniform can tell a story of multi generations of military service of the Howe familyA length of thick, navy blue, cylindrically shaped fabric. Knotted in two locations to create two loops at either end. One loop is 270mm long when outstretched and the other is 82mm long when outstretched.royal engineers, battledress jacket, battledress jacket khaki, lanyard, royal australian engineers

Mid-length shift dress in light grey-blue. Dress consists of two breast pockets, each with rounded flap closure held in place by two press studs. Dress is fastened down centre with three silver buttons held in place with a metal ring (only two buttons remain). From waist line down, dress is fastened by a hidden zipper and hook and eye. Waist line is pleated and carries two loops on the back, through which a fabric belt (0030.2) is threaded. Two fabric loops on each shoulder may have been used to hold epaulettes or similar. Dress sleeves are rolled up by 40 mm. Collar is notched. Interior label on left side at waist height reads "IYD CLO CO/VIC./8410-66-000-000/SIZE 18/ARMY NO........../NAME............"

Fabric belt with seven lines of topstitching running the length of the belt. Belt fastened by fabric covered metal buckle through which a pointed end of the belt passes. Pointed end bears press stud though no on corresponding fitting is evident; loose threads indicate where the complementary fitting may have once been. uniform, dress

Jacket worn by Brendan Honey when performing the duties of a Petty Officer Radio Supervisor in the Royal Australian Navy from Oct 1979 to Oct 2000Jacket Double Breasted Service Dress Navy Blue with gold embroided insignia, [Radio Operator Petty Officer] on right upper arm; gold embroided rank insignia [Petty Officer] above three gold embroided chevrons indicating 12 years service on the left upper arm; shoulder flashes with gold embroided word, "Australia" on both shoulders. 8 gold button with embossed Australian Navy Emblem and the word "Australia" in parallel columns of 4. Size 99R (Regular fit) with 2 small gold button with embossed Australian Navy Emblem and the word "Australia" the cuff of each arm.Manufacturer's identification label on inside right breast.Manufacturers label measuring 4mm x 8mm showing company logo ADA / 1990 / arrow pointed up /NSN:8405-66-132-2314 / 70% 30% Wool Poly / size 99R / match / trouser size 89R / No / Name / Dry Clean Only / Made in Australia/ owner's name written in black by a laundry marking penjacket, navy, jacket service dress, jacket petty office radio supervisor

The insignia on the collar of this jacket indicates that its wearer was a Marine Technical Propulsion Petty Officer in the Royal Australian Navy.Double breasted jacket in dark navy colour with notched lapels, chest pocket on left side and two hip pockets. Eight gold buttons fasten the jacket in front, each bearing Navy insignia of a crown above an anchor above the word "AUSTRALIA". Sleeves each bear navy blue patch on upper shoulder with the word "AUSTRALIA" embroidered in gold thread. Cuff of sleeves carry three gold buttons as previously described. Lapel collar has an embroidered patch on both sides which includes an ornately embroidered crown, above a propeller, above a six-pointed star above a "P"; all insignia is embroidered with gold thread. Jacket contains two interior chest pockets and is lined with synthetic material. Buttons carry embossed text "STOKES/MELB" Shoulder badges read "AUSTRALIA" Interior chest label reads, "A.G.C.F./VIC. 1981/8405-66-100-2323/SIZE. 104P/MATCHING TRS/SIZE 99P/R.A.N./MADE IN/AUSTRALIA." Handwritten on this label are the annotations "5114247/BAUMGARTEN"chief petty officer stoker, royal australian navy

Light blue woollen beret with black synthetic binding around rim, attached to black cotton lining. United Nations badge is attached to front of beret in gold and white enamel, held in place with pin; badge depicts the globe surrounded by branches of an olive tree. Interior lining has diamond-shaped manufacturer's label stitched on. Beret has two black eyelet holes on wearers' right side. Interior label reads "HILLS/NEW-ZEALAND/made/PURE WOOL/BERET HOOD/UNITED NATIONS/PROPERTY/7 5/8"united nations, peacekeeping, blue berets, uniform, interwar

This flying suit would have been worn by a pilot of the Royal Australian Air Force. It is a drill suit and most likely was not used in active service. This flying suit dates to 1988. It is no longer manufactured and is an historically significant article of military clothing. It is also in good condition.Olive drab coloured overalls. Full length sleeves and full length legs. Two pockets on the front of each leg. One zip at the front of each leg with extra fabric in the interior for fabric width enhancement. One access zip on each hip. Two diagonal breast pockets, either side of chest. One small pocket on each arm. All pockets are fastened with metallic brass colour zips. Another pocket on the left upper arm with stitched sections for storing pens. A silver coloured metallic pen holder is clipped and stitched into this section. One epaulet on each shoulder, each fastened with a brass coloured metallic stud. Regular shirt collar. One long zip at the front from the groin to the collar. This has two zip handles, each with a thin piece of leather attached to aid zipping. A patch with inscriptions machine stitched to nape of neck interior. Three brass coloured metallic studs, with a small piece of size adjustment fabric (and the clipping stud attached to this) on each sleeve. Three brass coloured metallic studs, with a small piece of size adjustment fabric (and the clipping stud attached to this) on each side of the waist. One rectangular leather clip attached to the upper right leg pocket. Patch stitched to nape of neck interior has the following inscriptions: A.G.C.F. VIC 1988 (symbol of broad arrow) SIZE.3 8415.66.013.1557 NO NAMEflying suit, royal australian air force

Royal Australian Navy officer's peaked cap with a woven dark navy band and off-white piqued top in synthetic material. Patent leather peak is black with green underside. The cap has a black patent leather chin strap that runs across the top of the peak, secured on left and right with press stud buttons. Above the peak is an embroidered insignia of the Royal Australian Navy, a crown with an anchor underneath. Hat brim is stiffened by foam and bears a brown leather band with punched holes, presumably for ventilation. The interior lining is black.Interior tag at back of hat reads "59". Inscription on underside of hat peak is illegible.royal australian navy, navy, hat, cap, uniform

This style of jumper has a long history in the Royal Australian Navy, descending from the uniform style of the 19th century Royal Navy.Navy blue long sleeved, heavy-weight jumper with square rig collar. On left sleeve is an embroidered patch with the word "AUSTRALIA," underneath which is an anchor insignia and three downward pointing chevrons in gold embroidery thread. On right sleeve is an embroidered patch with the word "AUSTRALIA" on the upper shoulder, underneath which is an embroidered gold wheel on a semi-circle shaped patch. The jumper has a deep neckline, tied with a cotton navy tie. Accompanying collar (0036.2) attaches to the jumper via three navy blue plastic buttons at the back of the neck, and three navy blue plastic buttons running down both left and right interior neckline. The jumper has a zip on the left hand side which runs from the hem to the waist.On patches "AUSTRALIA" Interior label at back of neck reads "ADA/2001/[broad arrow]/NSN: 8405 66 132 2508/SIZE: 111 L/NO/NAME/WOOL/POLYESTER/DRY CLEAN ONLY"royal australian navy, uniform, marine, shirt, australian defence apparel, ratings

This shirt was manufactured in 2004, and was presumably owned by a Beechworth local service personnel by the name of Cross. This piece of clothing would have been worn as part of the standard Royal Australian Naval Ratings uniform.White short sleeved shirt. Square collar with thin navy blue trim. A curved slit on either side of the lower edge (near the hip area) and an extra piece of fabric within each slit. A white label with inscriptions is stitched to the seam in the middle of the lower back seam. This has n written inscription beneath on the shirt fabric.Inscriptions on the label: CAN'T TEAR 'EM 8405-66-132-3767 R.A.N 2004 SIZE: 117 35% COTTON 65% POLYESTER GENTLE WARM MACHINE WASH. RINSE WELL. WARM IRON. DO NOT SOAK. DO NOT BLEACH. DRY CLEAN (A) MADE IN AUSTRALIA Written inscription under label: CROSSshirt, naval ratings, royal australian navy, navy

Unknown donor, this item was typically worn by Army personnel for day to day duties at Base and workshops etcA day to day typical item of clothing worn by some Army personnel for their duties.Green cotton overalls. 410 mm shoulder width, 1143.5 mm length, 53 mm arm length-top of shoulder to arm end.,48mm waist width, 73.5mm leg length,62mm zip front from collar to waist., 39.5 mm collar with 75mm width.5mm sleeve cuff width., 45mm width for leg cuff. 16 mm zip length for all 4 pockets. Two pockets vertical from waist line-22.5 mm from middle of waist. Top two pockets with zip sloping from shoulder down towards centre of chest.Top of zip 11.5mm from shoulder with bottom of zip 23.5mm from shoulder. The pocket finishes at waist line-15mm from waist to lower zip position. Cloth hanger 7 by 25mm sewn on inside neck. Four pleats at lower back of coveralls.Green tag on neck: “A.G.C.F. VICTORIA 1985 ARROW SIGN SIZE 85-90SH 8405.66.060.4199 SERVICE NO . NAME............................ “ One other tag below first tag. The second tag is a tear off tag (7mm long ,8.5mm wide)made of light canvass off white colour with the following inscription within a 6.5mm width by 5.5mm deep 2mm black border “ THIS TAG IS FOR IDENTIFICATION ONLY PLEASE REMOVE BEFORE WEARING Docket No 44784/1 Order No 295024 34 Size. 85-90 SH Garment No 20273 Remarks. R 34 “ “ 29” At bottom right hand corner of white tag. army, geen

This style of collar has a long history in the Royal Australian Navy, descending from the uniform style of the 19th century Royal Navy.Rectangular shaped collar with three white parallel lines running the border of the collar. Collar is light navy on top and striped white and blue on interior. Collar is held in place with nine buttons on the jumper, there are nine corresponding machine-stitched button holes on the collar. Handwritten on the interior at the back of the neck and on the edge of the square collar is "D. KRUEGER" On interior label on right side, "A.G.C.F./SIZE. 3/8406.66.078.0013/R.A.N./MADE IN/AUSTRALIA"royal australian navy, uniform, marine, australian defence apparel, ratings, collar

Worn by an Australian Navy Warrant OfficerJacket Double Breasted Service Dress Navy Blue with rank insignia, [ Warrant Officer] on lower arms; on the upper arms; shoulder flashes with gold embroided word, "Australia" on both shoulders. 8 gold button with embossed Australian Navy Emblem and the word "Australia" in parallel columns of 4. Size 109R. Manufacturer's identification label on inside right breast.Inscriptions inside pocket 8405.66.132.2318 size.109R match. ADI logo. 5114147 Baumgarton. Trouser size.99R 70% 30% Wool/Poly. Dry clean onlywarrant officer navy australian senior service

Short sleeve khaki coloured shirt with two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a khaki coloured plastic button. Six buttons fasten the shirt down the centre front. Patch on left and right shoulders depicts three downward pointing chevrons in brown and white embroidery thread.dress uniform, pants, australian defence force

Short sleeve khaki coloured shirt with two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a light brown coloured plastic button. Six buttons fasten the shirt down the centre front, down to an unfinished, overlocked hem. Patch on left and right shoulders depicts three downward pointing chevrons in brown and white embroidery thread.dress uniform, australian defence force, shirt

Long sleeve khaki coloured shirt with two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a brown coloured plastic button. Six buttons fasten the shirt down the centre front. Patch on left and right shoulders depicts three downward pointing chevrons in brown and white embroidery thread. Sleeves are fastened with two plastic buttons on each arm. Manufacturer's label on interior back of neck.Manufacturer's label on interior back of neck reads "CLASS-8405/66-027-2495/ARMY No/NAME"dress uniform, australian defence force, shirt

The item is a representative example of previously standard issue uniform and is in excellent condition. As a set alongside 0040.2, the uniform has aesthetic significance in its design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field shirt in disruptive pattern colours of green, khaki and browns. Long sleeve with five buttons up the front, two chest pockets with button-down flap pockets. Both sleeves are reinforced from the elbow down to the cuff; cuffs are fastened with a single plastic button. Above the right chest pocket is a patch with embroidered inscription in black thread on disruptive pattern backing. Shirt also features plain epaulette's on both shoulders, fastened by plastic button. Manufacturer's label on interior reads "ADI P/L/VICTORIA/1989/[broad arrow]/8415.66.130.0033/SIZE. 100R/NAME/SERVICE NO./MACHINE WASHABLE/DRIP DRY ONLY/DO NOT IRON/DO NOT STARCH/DO NOT BLEACH" Patch above chest pocket reads "PARKER"camouflage, uniform, australian defence force, disruptive pattern

The item is a representative example of previously standard issue uniform and is in excellent condition. As a set alongside 0040.1, the uniform has aesthetic significance in its design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field trousers in disruptive pattern colours of green, khaki and browns. Two pockets on either hip, two pockets on both thighs fastened by two plastic buttons and one pocket on the back right side, fastened by a single button. Five large belt loops encircle waist, held in place with a dark green khaki button. Trousers fastened with a zipper and button, and adjustable tabs around hip bones. camouflage, uniform, australian defence force, disruptive pattern

This hat was worn by D. P. Bright, whilst serving in the Royal Australian Navy, presumably on the H.M.A.S. Leeuwin.Sailor's hat with removable ribbon which sits on exterior band with machine embroidered inscriptions, tied in a bow at the back. Hat is piqued, stiffened white cotton with two white eyelets on both left and right side. Dark navy band on exterior with brown leather lining on the interior, with cotton bow on interior back. On interior of hat, the hat contains a plastic lining on which there is an inscription. On either side of the inscription is a strip of beige coloured cotton lining in the shape of a semi circle (see photos).On ribbon, "H.M.A.S. LEEUWIN" On interior, "BRIGHT. D.P. HONDEN"; crossed out is the inscription "D.P. BRIGHT" Manufacturer's label reads "HILLS HATS PTY.LTD./SYDNEY N.S.W. 1972/R.A.N. 20476 6 5/8 /No./NAME/MADE IN AUSTRALIA"royal australian navy, navy, sailor, leeuwin, melville, cape leeuwin

According to the UK National Archives, the firm F. C. Chamberlain & Co. was founded by Frederick Chamberlain, who made boot uppers at West Street, Wellingborough, in 1891. In 1903, he had moved to Mill Road, and by 1903, was established in Palk Road, producing boot uppers, leggings and gaiters by 1919. These gaiters are therefore presumed to be an early example of products produced by the company.Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle (now missing) and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Embossed manufacturer's name, "F.C. CHAMBERLAIN & CO/1913"legging, gaiter, f c chamberlain & co, first world war

Khaki coloured canvas legging constructed of three panels, sewn together with beige topstitching. Gaiters fasten around leg by way of nine hooks which fit into metal eyelets; a strip of canvas runs under the foot and is buckled on the other side. One tag on interior and printed manufacturer's information on interior centre panel; printed in black.Tag reads "2-R"; printed inscription reads "2R/LEGGINGS,CANVAS, M-1938 DISMOUNTED O.D./THE BRAY COMPANY/10-27-43 W 12-036 OM 114B/72-L-61923/JEFFERSONVILLE OM DEPOT"second world war, uniform, jeffersonville

Khaki coloured canvas legging constructed of three panels, sewn together with beige topstitching. Gaiters fasten around leg by way of nine hooks which fit into metal eyelets; a strip of canvas runs under the foot and is buckled on the other side. One tag on interior and printed manufacturer's information on interior centre panel; printed in black. Cotton shoelace is fed through one eyelet at top; shoelace has one aglet and one end without an aglet.Tag reads "2-R"; printed inscription reads "2R/LEGGINGS,CANVAS, M-1938 DISMOUNTED O.D./THE BRAY COMPANY/10-27-43 W 12-036 OM 114B/72-L-61923/JEFFERSONVILLE OM DEPOT"second world war, uniform, jeffersonville

This belt was manufactured for military service. It is presumably a World War Two era article of Army uniform.This Army belt was presumably made and used during the World War Two era and therefore has historic value. Brown leather belt with a brass buckle. The belt has twelve holes in two rows at one end for fastening into the buckle. The very tip narrows to a point. There is light brown stitching along the edges of the belt. There are two brass studs which hold the leather in a loop of the other end. There is an additional piece of leather fixed to this looped edge for holding the other end in place. The buckle is made of a silver coloured brass and has two rods which pass through two of the twelve holes for fastening. The buckle also exhibits blue/green copper corrosion in several areas. belt, war, uniform, army, royal australian army, world war two, ww2, wwii, second world war

The Type 62 is a re-badged British Pattern 1907 bayonet. Siam purchased 10,000 SMLE rifles and Pattern 1907 bayonets from Britain in 1919 to equip the "Wild Tiger Corps," royal bodyguard of Vajiravudh, King Rama VI (reigned 1910–1925). The tiger figural on the ricasso is representative of the Wild Tiger Corps. Year 2462 on the Buddhist Calendar corresponds to 1919. SMLE rifles and Pattern 1907 bayonets were taken from British stocks, refurbished by Birmingham Small Arms (BSA), and remarked with Siamese markings. The bayonets were shipped with standard steel-mounted leather scabbards. However, the leather rapidly deteriorated in the tropical climate, so the Siamese made a replacement steel scabbard body to which the original steel mounts were brazed. Scabbard bayonet metallic slightly tapered rectangular with rounded edges; oval belt nob on blazed steel top of the bayonet and a blazed steel bottom; the body is steel with dents and a wear holes on one side.ww2, world war 2, bayonet