Victoria once had well over one hundred fire lookouts and firetowers. Fire lookouts, or observation posts, were often just a clearing on a hill or a vantage point, whereas firetowers were definite structures. There are at least three categories of firetowers… (1) tree perches, (2) four-legged towers made of either wood or steel, as well as (3) hilltop cabins and observatories. Many were established by the Forests Commission Victoria (FCV) in the 1920s, but the network was expanded rapidly in response to recommendations of the Stretton Royal Commission after the 1939 Black Friday bushfires. The wooden towers were often built by bush craftsmen like legendary FCV overseer Clem Heather from Orbost. But advances in aerial reconnaissance and radio technology led to the gradual reduction in the number of fixed towers. FFMV now operates 72 firetowers. The CFA, Melbourne Water, Hancock Victorian Plantations (HVP) also operate some, the Army has one at Puckapunyal overlooking the live-firing range. Only two remaining fire towers of this design remain in Victoria (Mt Little Dick and Big Tower in the Mullungdung State Forest). Mt Nowa Nowa and Stringers Knob burnt down in the 2019/20 bushfiresLarge model of an Reef Hills fire tower. Presumably used for instructional purposes. Traditional FCV four legged design with three landings and closed cabin.bushfire, forests commission victoria (fcv)

The Ballarat School of Mines often conducted assaying for a fee in their Model Mine. Ballarat School of Mines Assay card. Mr Sargent (most probably Robert M. Serjeant) presented 18 bags of sandstone for assayingballarat school of mines, assay, assaying, sandstone, serjeant, r.m. serjeant, robert m. serjeant., mining

A report considering a model for delivery of services to the Deaf in the Barwon Heads Region26cmHx20.5cmW, 10 pagesadult deaf society of victoria,services for the deaf in barwon heads

Changes over earlier FE model were minimal and primarily cosmeticAs manufactured by GMH4 door sedan, blue in colour chrome features including side strips, grille and bumpers and headlight surrounds.Holden emblem boot centre chrome lettering on bonnet, holden emblem grille centre special with Holden emblem on rear quarter panelsvehicle, fc, sedan, holden

Modelling clothing at an RSL Ladies Fashion Show at Lakes Entrance VictoriaBlack and white photograph of Melissa Jones at a fashion Pde Also another photograph of Melissa Jones at Prechool Fashion Paradegenealogy, fundraising, fashion

This type of film developing tank was developed by Kodak in 1913. It was designed to allow the user to develop film in the daylight. The cylindrical tank inside the box with the dark apron surrounding it protected the film from the light. This model was 'Model 2' and Brownie size. The instruction booklet is dated to 1918.This objects helps to tell the story of photography as a hobby. It is an early example of a portable film developing which allowed the user to develop film in the daylight. It shows advancement in the technologies available to the hobby photographer.Rectangular timber box and lid. The lid has red lettering ' Kodak Film Tank'. The container part of the box has dovetail joints and a slight lip at the bottom where the base is larger than box. The box contains 2 metal turning handles, a cylindrical film tank and a metal tool which has a circular top end and a slight hook at the opposite end. The inside of the tank is painted black. The box also contains an instruction booklet. At the inside base of the box there is a paper leaflet pasted to the bottom. It has printed important and caution information on it as well as diagrams.Film / Kodak / Tankphotography, kodak, portland, glenelg shire, film, developing, film developing, hobbies, leisure, photographer

Vol. 4 No. 1, January 1949 of "Tram Tracks - The Electric Traction Monthly" of the Australian Electric Traction Association. Magazine consists of 20 printed pages, with a single staple on the saddle. Contains a photo of the construction of the Victoria Parade tram line, article "Trams and the Motorist", items on Melbourne (Bourke St, "Higher costs with Buses - Melbourne Experience", Brisbane, Newcastle, Sydney, Monorails, railway map of Australia track gauges, (centre page), Brisbane Tramways, Melbourne and Sydney electric trains, and letter to the Editor from John Buckland - not supportive of Bourke or Latrobe St tramways. Issue has advertisements for the Model Dockyard, ARLHS, The Hobby Shop, Barnes Tennis Centre, Fleet, Christie Model Railway Equipment of Sydney, Meadmore Model Engineering, Austral Bronze, Wattle Park, Traction Publications and Robilt "O" gauge locomotives, Parker & Gray, The Model Dockyard,Has initials "JBS" in top right hand corner in pencil.trams, tramways, electric traction, aeta, australian tramways, mmtb, pcc, sydney, newcastle, brisbane, bourke st

Green cloth hardcovered book with black leather spine, featuring the art deco work of Bernaux, Beligant and Feseau, Binquet, Bouchard, Bouraine, Bourdelle, Chassaing, De Bardyere, Gallerey, Gauvenet, Guenot, Hairon, Jallot, Lalique, Le Bourgeois, Malcles, Joel and Jan Martel, Max Blondat, Follot, Sad, Sue et Mare and Vera and J. Martin. Monochrome prints numbered 1 to 32, showing examples of modern wood and stone carving, all by named people. Text in French.non-fictionsculpture, carving, art nouveau, art deco, seguin, joel et jan martel, repousse, plaster, modelling

"Tuner's Handbook: the Hattersley "Standard Model" loom"-George Hattersley and Sons LtdBook,42pp. Dark blue soft cover, printed black ink.textile industry - history textile machinery weaving textile industry - education, george hattersley and sons ltd, weaving looms, weaving machinery, textile industry - history, textile machinery, weaving, textile industry - education

Booklet about the Edison Model J Miners Electric Safety Cap Lamp. Small booklet with black and blue text, appears to be the manual for the lamp (SCM 0004)

Mosquito. One of a collection of 25 model aircraft made by Brian Anthony DOWD The de Havilland DH.98 Mosquito is a British twin-engined, shoulder-winged multirole combat aircraft, introduced during the Second World War. Unusual in that its frame was constructed mostly of wood, it was nicknamed the "Wooden Wonder"or "Mossie".Small silver plane with propellers at front and black & white circles on wings & sides. BONA on sidesmodel airplanes, mosquito.

Boomerang. One of a collection of 25 model aircraft made by Brian Anthony DOWD The CAC Boomerang is a fighter aircraft designed and manufactured in Australia by the Commonwealth Aircraft Corporation between 1942 and 1945.Small khaki plane with blue & white spots on wings & sides. Red nose.BFT model airplanes, boomerang.

Mirage. One of a collection of 25 model aircraft made by Brian Anthony DOWD Mirage is a name given to several types of jet aircraft designed by the French company Dassault Aviation (formerly Avions Marcel Dassault), some of which were produced in different variants. Most were supersonic fighters with delta wings.Green & brown fighter plane on a stand.A3-100model airplanes, mirage.

Avenger. One of a collection of 25 model aircraft made by Brian Anthony DOWD The Grumman TBF Avenger is an American torpedo bomber developed initially for the United States Navy and Marine Corps Green plane with white & blue circles on wings & sides, yellow band around tail. Yellow nose.CU-670model airplanes, avenger.

Spitfire. One of a collection of 25 model aircraft made by Brian Anthony DOWD The Supermarine Spitfire is a British single-seat fighter aircraft that was used by the Royal Air Force and other Allied countries before, during, and after World War II.Small khaki plane with red spot within a blue circle on wings and yellow blue and white circles around red dot on sidesKLB P9398 Image of Kiwi bird near cockpit. model airplanes, spitfire.

Demonstrates notes prepared by the TMSV for tours of the Ballarat and Melbourne systems and the nature of the notes.Five page spirit duplicated notes to act as a guide to visitors to the International Convention of Railway Modellers, Melb. 1970. Index, history of TMSV, map of Malvern depot, model trams, exhibition notes, place of Melb. Tram interest, notes and map on Ballaarat. Missing is pages 6, 7, and 8 - noted in index on page 1. Pdf image of document added 31/10/2013.trams, tramways, melbourne, ballarat, tmsv, model tramways

A wooden flat-top racquet with a laminated, convex throat, and cross-hatch handle grip. Model name, situated on the throat on obverse, is erased and replaced with a now illegible hand-written name. Model is most likely the 'Ashby'. Below is a decal of the Bliss company trademark of a 'B' linked to an anchor, within a shield device. Materials: Wood, Gut, Ink, Metal, Leather, Glue, Lacquertennis

A Revelation Professional Model tennis racquet, with ribbon whipping around shoulders and shaft, and a leather handle grip with X-formation perforations. Revelation logo features across base of head. Model name features along shaft. 'R' trademark features on plastic butt cap. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Ribbon, Paint, Adhesive tape, Plastictennis

A Talmo Model 3 tennis racquet, with cloth shoulder supports, reinforced with ribbon whipping, plastic collar around shaft, and a fine-grooved, fish-tail handle. Inscription across throat, on obverse: TALMO/REG'D/MODEL/3. Previous owner has written name on reverse of shaft. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Ribbon, Paint, Clothtennis

A Spalding 'Kro-Flite' model tennis racquet, featuring whipping around shoulders. Has a leather wrapped hand grip and embroidered butt cloth . Manufacter name features across base of head. Model name and 'flying bird with sun' symbol features across throat. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, String, Paint, Adhesive tape, Cloth, Threadtennis

A Spalding 'Nassau No.6' model tennis racquet, featuring concave throat & fine-grooved octagonal wooden handle. Has a leather end wrap and leather butt cloth. Manufacturer and model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Logo also printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Gut, Ink, String, Leathertennis

A Spalding 'Nassau No.6' model tennis racquet, featuring concave throat & fine-grooved octagonal wooden handle. Has a leather end wrap and leather butt cloth. Manufacturer and model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Logo also printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Gut, Ink, String, Leathertennis

A Wilson Andrea Jaeger Courtstar tennis racquet. Base of head features Wilson logo. Throat features model emblem - a blue crown. Shaft features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features X-form perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis

A Regent, Don Budge Contender, Tournament Model tennis racquet. Regent logo features across the crown, and base of the head. Model name features on the throat and shaft. Decal head image of Budge features on lower shaft. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, String, Glue, Lacquer, Metal, Paint, Leather, Ribbon, Ink, Adhesive tape, Plastictennis

A Regent, Flight II tennis racquet. Regent logo features across the base of the head. Model name featuresalong the shaft. 'R' trademark features at base of shaft. Model details feature on the right side of the shaft. Leather handle grip features X-formation perforations. Materials: Wood, Nylon, String, Glue, Lacquer, Metal, Paint, Ribbon, Ink, Plastic, Adhesive tape, Leathertennis

A Regent Triumph tennis racquet. Regent logo features across the base of the head and plastic butt cap. Model name features across the throat. 'R' trademark features at base of shaft. Model details feature on the left side of the shaft. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Glue, Lacquer, Metal, Ink, Plastic, Adhesive tape, Leathertennis

The St Dunstans braille writer was modelled on the German Picht model, which enabled the writer to read what was written immediately by place the embossed character upwards of the carriage. Named after the organisation, it used a different finger technique than the Stainsby-Wayne machine that was predominantly available, and was lighter to carry.Black and silver Braille typewriter, with six keys and a large key (space bar) in front. At the back of the keys is a roller arrangement (similar to a typewriter) where paper is placed.St Dunstans Mark II. Ser. No. 575braille equipment, assistive devices