Deep yellow tracksuit top with dark green trim-7cm band around waist, 7cm band at wrist, 3.5 cm band on either side of front zipper opening. 16 cm roll over collar and 4 cm band on top side of raglan sleeves from shoulder to wrist band. dark green appliquéd letters across the back of the garment "AUSTRALIA''.Lower front :LHS has diagonal zipper (15cm) for internal pocket. Inside body of garment is lined with white perforated nylon fabric. Sleeves unlined.''SPEEDO'' emblem appliqued over RHS chest. Label inside back neck ; Speedo Actionwear in 100% nylon, 40''-106cm. Made in Britain Under licence''.costume, male, deep yellow tracksuit top

Clothing. Infant's white spotted muslin waisted dress. High round neck with lace trim. Front of dress has alternating vertical stripes of pin tucks and lace. Skirt tightly gathered into casing at waist. Lower section of skirt has alternating horizontal stripes of pin tucks and lace. Long shaped sleeves with fabric cap around arm hole. Sleeve gathered into casing at wrist. Item edged with lace, forming a frill. Centre back opening (20cm) fastened with five X .9mm white buttons between neckline and waist.costume, children's, infant's white spotted muslin dress

The puppets were made by German POW's in camp 13 and sent to internment camp 3 as gifts for the children at Christmas time.Hand painted light pink paper mache head with goatee beard, black eyes and eyebrows. Is wearing a black top hat and has black short hair and side burns. There are no body parts. His legs are just his trousers of checked tweed. His shirt is navy blue with high neck with white trim and 6 gold tacks securing head to body. Sleeves are long with white cuffs. Hands are brown paper mache. He has a wooden knife with elastic on handle to put on arm and a wooden key with metal ring to put on arm.pow puppets, pow handcrafts, hand puppets, sharon lohe, ww2 camp puppet theatre

Cathy and Finlay Currie (Allan's parents). Mrs Currie is wearing a dark dress with a deep V-shaped patterned insert which extends from neckline to waist and appears to have looped edging. Her dark, wide-brimmed hat is trimmed with flowers. She holds a dark clutch bag and has dark shoes. There is an elaborate corsage pinned to her dress. Mr Currie is in a 3-piece suit of medium light shade, and a tall hat. Another woman can be seen behind them. They are outside a church and are probably at a wedding.

A Chemold Owen Davidson Hawk tennis racquet, with ribbon whipping around shoulders and shaft, and red rubber with black trim handle grip. Chemold logo features across base of head. A tartan pattern features on throat. Model name features along shaft. Blue, red and white Chemold trademark features on lower shaft. Plain white plastic butt cap. Autograph by Davidson features along shaft on obverse. Materials: Wood, Nylon, Ribbon, Paint, Ink, Plastic, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis

The donor's husband's grandmother was Bertha Michaelis who lived at 'Linden', St Kilda. She married David Jacob Baruch (known as Dalbert) in Hamburg on 9 November 1881. Bertha was born in Melbourne. The couple lived in Germany. Bertha returned to Melbourne with their two children, Ernest and May, after Dalbert died in 1893. May married Rabbi Jacob Danglow in 1909 and they had one son, Frank, who was the donor's husband.Cream satin princess line wedding dress with dark cream lace trim. Fastens centre front with 17 satin covered buttons. Nine extant bones are placed on the interior seams and darts. Three-quarter length fitted sleeves. Bodice backed with cream cotton. The back trained panels of the skirt have been cut to extend into a pleated swathe of satin that wraps around the hips to the centre front. A square padded bustle pad is attached to the interior back of the skirt. The hem of the skirt is decorated with kilted and swathed satin and lace. Label, interior waist tape, woven silk stamped in dark green: H. L. HEYNEMANN / Hannover / Seilwinderstr. 6a., Bose; In monogrammed ("HLH") circles either side: (Left) BAARZAHLUNGS SYSTEM; (Right) ERSTE PREISE. Stitched in thick cotton thread on interior waist tape: *9097wedding dress, germany, hannover, linden, st kilda, bertha michaelis, david jacob baruch

Four-piece wedding outfit comprising bodice, belt, skirt and separate train all made of cream figured wool. The bodice has a centre front ruched panel, stand collar and a fitted two-piece sleeve with full gathered head. It is trimmed with cream-coloured beading with pearl drops. The bodice has seven interior bones and is fastened with metal hooks and hand sewn eyelets which are concealed under the front panel. A separate pleated belt fastens centre back. Plain gored skirt with separate train that ties around the waist.wedding dress, 1890s fashion

Belonged to donor's aunt1960s navy blue fine silk shantung fabric dress with lace bodice and elbow length sleeves. Metal zip, hook& eye down back. A-line skirt with two front seams and pockets. Dress is below the knee length. Lined from above bust line in bodice with fine blue crepe fabric. Matching jacket of fine silk shantung with lace trim on collar& cuffs of full-length sleeves. Self-covered shantung 4 buttons and stitched buttonholes. La Petite label in jacket and underarm on dress.La Petite Model Frocks, 165 Collins St Melbourne.la petite

Pressed metal plate with corners trimmed, top section partly folded with two slotted holes, sides folded to give strengthening to the plate, painted with a yellow background and the letter "M" and numbers "57" painted in black, to give a Run Number Plate for Malvern Depot No. 57. Painted with the same detail on either side of the plate. Used by Malvern Depot until they were phased out and replaced with the Automatic Vehicle Monitoring system c1990. Used to identify the depot and "run number" or timetable that the tram was running on, two in each tram, to enable monitoring by inspectors and crews.trams, tramways, mmtb, malvern depot, timetables

Pressed metal plate with corners trimmed, top section partly folded with two slotted holes, sides folded to give strengthening to the plate, painted with a yellow background and the letter "M" and numbers "65"painted in black, to give a Run Number Plate for Malvern Depot No. 65. Painted with the same detail on either side of the plate. Used by Malvern Depot until they were phased out and replaced with the Automatic Vehicle Monitoring system c1990. Used to identify the depot and "run number" or timetable that the tram was running on, two in each tram, to enable monitoring by inspectors and crews.trams, tramways, mmtb, malvern depot, timetables

Pressed metal plate with corners trimmed, top section partly folded with two slotted holes, sides folded to give strengthening to the plate, painted with a white background and the letter "M" and numbers "40" painted in red, to give a Run Number Plate for Malvern Depot No. 40. Painted with the same detail on either side of the plate. Used by Malvern Depot until they were phased out and replaced with the Automatic Vehicle Monitoring system c1990. Used to identify the depot and "run number" or timetable that the tram was running on, two in each tram, to enable monitoring by inspectors and crews.trams, tramways, mmtb, malvern depot, timetables

Joseph Gleave & Sons was working as a plane maker in Manchester from 1832 and was at Oldham Street from 1854 to 1868 and (as Joseph Gleave & Son) from 1868 to 1913. The company made complex wood planes of which the subject item is an early example. The company sold tools from other makers as well and was based in Oldham Street Manchester. Since that time the company has adapted and mutated and is still buying and selling tools and industrial supplies to this day. However the company stopped making complex wood planes in 1926. A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce an ornamental finish to timber. The tool was used before routers and spindle moulders came into general use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims, etc. or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish.A significant tool from the late 19th to early 20th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves handmade shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any decorative timber item.Complex Moulding Plane, Torus Bead. Stamped J. Gleave (Maker), No 7 & T. Moody (owner)flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, josphe, joseph gleave & sons, complex plane makers, carpenders tools, woodworking tool

Information from donor: "The orange booklet was printed mid-to-late 1930’s or early 40’s by my father Curtis Drenen, and written by my grandfather Thomas Drenen. The original publication would have been handset by Thomas’s employees as he had a keen interest in the mines financially. This booklet has been set and cast in hot metal on a linotype machine my father purchased after taking over the Rutherglen “Sun” and passing of Thomas in July 1932. This booklet was one of half a dozen I put together when I found some flat sheets of 8 page sections stored away in a cupboard. I folded, collated the sections, stapled and trimmed these Sheets during my time at the “Sun” from 1951 to1969. Where the rest are I have no idea. I wrote the final paragraph on Page 44 from a copy provided be my mother." Thomas Drenen was Proprietor and Editor of The Rutherglen "Sun," from 1886 to 1932. The articles in the book were first published in 1904.Small book of 44 pages, stapled, with cover of orange heavy paper.On cover: "Robert Drenen, 11 Hinchley St., Wangaratta" At bottom of last page, the last line "In suspending work the mine was not dismantled, except taking the ropes" is followed by handwritten lines: "down. However no further was done with the mine and the plant and machinery was later sold to Mr S.P. Gollings and eventually dismantled. THE END."drenen family, gold mining

This afternoon dress belonged to Clara Johnstone Miller (nee Bell, 1866-1910). Clara was the only daughter of Mr James Bell, a councillor of the Shire of Leigh (today a part of Golden Plains Shire) and owner of Woolbrook Homestead in Teesdale, near Geelong. In 1888, Clara married prominent businessman, racehorse owner, racing identity and pastoralist Septimus Miller (1854-1925). Septimus was the sixth of seven children born to Henry 'Money' Miller and Eliza Miller (nee Mattinson). 'Money' Miller was a well known financier and politician and reputedly one of Australia's wealthiest people in his time. In 1889, Clara and Septimus moved into the house 'Cantala' in Dandenong Road, Caulfield. They had one child, Gwendoline Stewart Miller, who died in 1902 at the age of thirteen of diabetes - a largely untreatable condition at the time (insulin would not be discovered until 1921). Clara died in 1910, aged only 44. Septimus subsequently married Helen (nee Henderson), with whom he had a son, Ronald (1915-1990). The Millers were buried in the Brighton General Cemetery in a large Gothic-style vault. Upon Clara's death, Septimus sent much of her clothing and Gwendoline's to her mother Mary Bell. Some of these items were passed down to two of Clara's nieces, Miss Mary Bell and Mrs Lois Lillies, who donated them to BHS around 1973.A salmon (pale orange pink) corded silk afternoon dress with orange beaded embellishments, consisting of a bodice (.1) and skirt (.2) from c.1890. The bodice features a high standing collar with triple pleated bone silk chiffon trim along the top line, under the chin. This same chiffon is also secured in two pieces gathered and secured under the collar and and at the waist adding volume over the bust line and partially obscuring the jacket closing. The chiffon is secured at the side into the main fabric of the bodice by the beaded embellishment. The pink seed beads are sewn in lines of five beads one after the other creating a diagonal design that tapers from the shoulder to the waist. The bodice is boned around the front and back and secured down the centre font by nineteen hook and eyes and additional cotton tapes. Further beading details the bottom centre front and base line of the bodice. The shoulders have been repaired with replacement fabric to match, from our records it appears that the repair work was performed in circa 1974 but no record exists of the original shoulder design and if the repair was an exact copy of the original. The repaired shoulders feature a small frill around the shoulder yoke and top of the arm. The sleeve is fitted and three quarter finishing just below the elbow. The base of the sleeve is also trimmed with the pink bead design and bone three pleat chiffon trim. The back of the bodice features shaped panels contouring the jacket neatly in at the waist and then splitting and splaying out over the fullness of the skirt. The skirt appears to have been floor or ankle length held at the waist by a wide waistband. The skirt openings have been altered from the original currently featuring two openings secured by press studs. The skirt is gathered to the waistband at front and back creating fullness. The lower part of the skirt features the same pink bead embellishment and additional beaded flowers and diagonal point edge detail.clara miller, woolbrook, septimus miller, henry 'money' miller, gwendoline miller, cantala, 1890s fashion, caulfield, brighton general cemetery

This horse-drawn, two-wheeled cart with a tank, is known as a Furphy Farm Water Cart that was made in Shepparton, northern Victoria, c. 1942. John Furphy (1842-1920) was born in Moonee Ponds, in 1842 to Irish immigrant parents and subsequently raised in the Yarra Valley before the family moved to Kyneton in central Victoria, where he completed an apprenticeship with the firm Hutcheson and Walker. Murphy began operations of his own at a site on Piper Street in Kyneton in 1864. He relocated for a business opportunity and founded the first blacksmiths and wheelwrights shop in the newly surveyed town of Shepparton in 1873. Furphy invented many farming tools and machines including a patented grain-stripper, and won awards at the 1888-89 Melbourne International Exhibition. His most famous invention is the Furphy Farm Water Cart, designed in the 1880s, at a time when water for most households and farms was carted on wagons in wooden barrels. The Furphy’s water cart is a single item that combines a water metal tank and a cart. The design of the cart was simple yet effective, and became popular very quickly and established itself as a vital piece of farming equipment. The water cart has had a number of words cast into its ends over many years. References to the foundry’s location in Shepparton, as well as advertising of other products also manufactured by J. Furphy & Sons were present on the ends. However, the most significant set of words to feature on the tank, was a poem encouraging continual improvement: ‘Good Better Best, Never Let it Rest, Until your Good is Better, And your Better Best’. During The Great War (1914-1918), the water cart was used by the Australian militarily at a large AIF (Australian Imperial Force) camp in Broadmeadows (Melbourne) where thousands of men were camped for months, before being transported aboard. Furphy Water Carts provided water to the troops, and were usually placed near the camp latrines, which was one of the few places the troops could share gossip and tall tales away from the prying eyes and ears of their officers. The water cart drivers were also notorious sources of information, despite most of their news being hearsay, or totally unreliable. By the time the men of the AIF were in engaged in combat on the Gallipoli Peninsula and the Western Front, the carts used for water supply had no markings and became simply referred to as Furphys. This owed as much to the coining of the term ‘Furphy’, Australian slang for suspect information or rumour. After a number of decades as principally a soldier’s word, 'Furphy' entered the broader Australian vernacular and was used mainly by the political class until recently when the term was taken up by a Australian brewer as a beer brand. This Furphy Water Cart was purchased by Friends of Flagstaff Hill in 2014. The support of local individuals, organisations and businesses enabled its restoration and later its installation alongside the existing late-19th century water pipe stand and 1940s hand pump The Furphy Farm Water Cart is of historical significance as it represents a famous Australian time-saving and energy-saving invention of the 1880s, replacing the labour intensive activity of collecting and dispensing water from barrels and casks on the back of carts. The water cart’s connection with manufacturing companies J. Furphy & Sons and Furphy Foundry are significant for being early Australian businesses that are still in operation today. Furphy carts are of military significance for the role they played during The Great War (1914-1918) in Australian army camps, and theatres of war in Europe and the Middle East, to supply the AIF troops with fresh water. A wooden framed, two-wheeled, horse-drawn cart, fitted with a horizontally mounted, cylindrical metal tank. The tank is made of rolled, sheet steel with a riveted seam, and cast iron ends with cast iron ends. The spoked metal wheels have fitted flat iron tyres and metal hubs. A metal pipe is joined to the outlet. The tank is silver coloured, the ends, wheels and trims are crimson, and the script lettering on tank sides is black. There are inscriptions on the tank, ends, and hubs. The water tank was made in 1942 in Shepparton, Australia, by J. Furphy & Sons and has a capacity of 180 gallons (848 litres). Hub perimeter, embossed “J. FURPHY & SONS” “KEEP THE / BOLTS TIGHT” Hub centre embossed [indecipherable] Tank, each side, painted “J. FURPHY & SONS / Makers / SHEPPARTON” Tank ends, embossed – “FURPHY’S FARM WATER CART” “BORN ABOUT 1880 – STILL ‘GOING STRONG’ 1942” “j. FURPHY & SONS / MAKERS / SHEPPARTON - VIC “ “S - - - - - L MANUFACTURERS” [SPECIAL] “SPIKE ROLLERS” “SINGLE TREES” “PLOUGH WHEELS” “IRON CASTINGS” “LAND GRADERS” “STEEL DELVERS” “CAST IRON PIG” “CHAIN YOKES” “GOOD – BETTER – BEST / NEVER LET IT REST / TILL YOUR GOOD IS BETTER / AND YOUR BETTER – BEST” Image [Stork carrying a baby] above shorthand, transcribed "Produce and populate or perish" Image [Furphy Pig Feeder] beside ‘Cast Iron Pig’ Shorthand, transcribed “"Water is the gift of God but beer and whiskey are concoctions of the Devil, come and have a drink of water"warrnambool, flagstaff hill maritime museum, water cart, furphy cart, furphy tank, furphy farm water cart, furphy, john furphy, john furphy & sons, furphy foundry, kyneton, shepparton, mobile water tank, jinker, hutchinson & walker, blacksmith, farm equipment, implement maker, tool maker, horse drawn, stork and baby, good, better, best, barrel, tank, first world war, wwi, eastern front, gallipoli, j furphy & sons

Cream coloured satin bodice with cotton lining. Deep V shape at waist front and back. Front opening has twelve cream coloured bowl shaped buttons with bound button holes. Two centimetre stand up collar.Front has two vertical darts on either side of opening - one on each side has plastic stiffening insert.Two inserts at back. One stiffening insert in RHS. Long sleeves have split on upper edge at hem. Sleeves have trim of gathered fabric attached above wrist. Black cotton stitches visible on both sleeve seams.costume, female, bodice

Merle made her own dress,as she had been a Home Economics Teacher, specializing in dressmaking. Dress is of silk chiffon, over tree bark satin, made on princess lines, with a Dior bow at the neckline. The brief sleeved bodice was cut with an oval neckline, trimmed with a flat bow. Fullness for the circular skirt was drawn to the back of the seven panel dress. A watteau pleat, train of embroidered nylon fell from high at the back of the bodice (refer 11400.493). A short tulle veil was held in place by a triple Dior bow. Skirt extends to a small train at back.Refer 11400.492.costume, female, wedding dress

Clothing. Infant's cream silk dress with bodice front and back. Casing at waist with .5 cm cotton ribbon insert. High round neckline with 1.5 cm lace trim and casing with cotton ribbon insert. Bodice at front has embroidered circle and leaf pattern. Centre back opening (28 cm) fastned ribbon ties at neck and waist and 1 X one cm button and button hole between. Straight long sleeves edged with 1.5 cm lace at wrist. Skirt is edged with 3 cm scalloped lace at hemline with two horizontal rows cutwork stitching.costume, children's, infant's cream silk dress

Clothing. Cream silk woman's bed jacket with cap sleeves trimmed with 2cm cream coloured scalloped lace. Sleeves embroidered with five 7mm flowers of different colours. Low scooped neckline dips to a V at centre front. Front opening and neckline edged with 2cm scalloped cream coloured lace. 6cm peplum front and back with drawstring casing connecting it to the bodice. .5cm ribbon tie through casing. Press-stud at centre front at base of neckline. Floral embroidery of wreath and scattered flowers on both sides of front bodice and at centre back below neck line.costume, female, woman's bed jacket

Objects.Wedding cake decorative assortment. Paper serviette:presumably from Reception - in red and blue lettering: Pellegrinis Melbourne, and an illustration of a cup of coffee. Cake decoration silk flower, velvet flowers, pearl trims, foil leaves: Plastic decorative heart shaped cake decorations with love bird and ring: Three velvet flowers with pearl centres: Four plastic bars to support cake pillars. Four postal order counterfoils: $3:25: 25c, $3. One receipt from Vic Roberts Men's Wear 1-65. One handyplast band-aid. One dot of confetti.wedding, accessories, cake decorations

Kodak Retina 1a 35mm bellows camera with extending bellows, in a leather case (.02) and an Instruction book (in German .03). The camera has a chrome trim with leatherette over the rest of the steel forming the body of the camera. It has a Retina Xenar F 2.8/50mm, Schneider - Kreuznach 2668277 lens covering speeds from B (bulb) to 1/500th of a second and an aperture opening of f2.8 to f16. Provision for a hot flash and various film speeds. Film advance lever with indicator showing number of photos taken. An old cartridge (.04) is loaded in the camera. Four pieces make the set.Kodak Retina Camera|Retina 1a|Kodakphotography, cameras

Demonstrates domestic items manufactured soon after the establishment of the tramway systems in Ballarat.Ash Tray - white glazed on front, unglazed rear with gold edge trim, light weight China in the shape of a "spade" with an image of the intersection of Sturt St and Lydiard St from the Post Office looking at the buildings on the south side of Sturt St including the Town Hall with two electric trams and the tram lines in the view. One of the trams is hauling a trailer. Possibly made mid to late 1900's. On rear has the makers stamp of "W&R Stoke on Trent" http://nicholnack.com.au/wiltshaw-robinson-patterns/index.php - accessed details that it is the mark of Wiltshaw and Robinson.tramways, trams, ash tray, sturt st, lydiard st, town hall

Black and white negative, by Wal Jack, of W2 380 (Moreland Route 15), at the Acland St, St Kilda terminus 1938. Note the Coburg Depot Run Number. Mal Rowe advised by e-mail 21/9/20 (from the Norm Cross notes) that To commemorate 25 years of the opening of Luna Park in St. Kilda, No’s 235, 249, 303, 380, 422, 454 and 568 were painted silver with dark blue trim and suitable sign writing. Mal noted that W2 568 was given the years 1913-1938 and lights around the roof.trams, tramways, w2 class, acland st, st kilda, route 15, luna park, tram 380

Two (2) No. or one set of - Pressed metal plates with corners trimmed, top section partly folded with two slotted holes, sides folded to give strengthening to the plate, painted with a yellow background and the letter "M" and numbers "31" painted in black, to give a Run Number Plate for Malvern Depot No. 31. Painted with the same detail on either side of the plate. Used by Malvern Depot until they were phased out and replaced with the Automatic Vehicle Monitoring system c1990. Used to identify the depot and "run number" or timetable that the tram was running on, two in each tram, to enable monitoring by inspectors and crews.trams, tramways, mmtb, malvern depot, timetables

The Northern District School of Nursing opened in 1950 in to address the issues around nurse recruitment, training and education that had previously been hospital based. The residential school was to provide theoretical and in-house education and practical training over three years. The students would also receive practical hands-on training in the wards of associated hospitals. The Northern District School of Nursing operated from Lister House, Rowan Street, Bendigo. It was the first independent school of nursing in Victoria and continued until it closed in 1989.A white porcelain feeding mug with gold trim. It has a five centimetres diameter base and curves out to nine centimetres diameter and is six and a half centimetres high. Two thirds of the top is enclosed. A three centimetre tapering to one centimetre, six centimetre long spout comes from the bottom of the mug in line with middle of the enclosed section. There is a one centimetre diameter, six centimetre long handle on the side. Used for feeding fluids to patients who are unable to hold a cup or are unable to sit up. Holes in the base of the spout control the flow. A German makers mark is on the base.ndns, feeding mug

Provides in a Q & A format, instructions to drivers in electric car operation, photos of various types of controllers, an A.B.C. for tramways drivers - "always" points to remember and has a reference index. Issued to F Reale-Key who worked for the Civil Engineering at South Melbourne Depot. Section of the MMTB or The Met and was authorised to drive trams. Demonstrates instructions issued to drivers and to those authorised to drive trams.Forty-Eight page, side staple book within blue Rexine covers and covered with plastic. Titled "Melbourne and Metropolitan Tramways /Electric System /Instructions to Drivers in Electric Car Operation" Dated 1966. Printed by Regent Press Pty Ltd, 457 Plenty Road, Preston. On the inside rear cover has an electric tram driver's certificate issued to F Reale-Key. On the inside front and rear cover has a card trimmed for "The Metropolitan Transit Authority of Victoria". For a photo of Frank standing in front of tram 8, see "MetLines - Vol 1, No. 9 December 1985". See image i2 for details.tramways, trams, mmtb, the met, drivers, training, south melbourne depot, civil engineering department, instructions

Black long-sleeved ladies’ silk blouse. High round neckline at front with V shaped lace insert from throat to bust line. Stand up lace and net collar. Top edge of collar is trimmed with pink ribbon piping and gathered cream coloured lace. There are three strips of brown tape attached vertically to the collar at each shoulder and front RHS of collar to hold plastic strips to support the collar in upright position. One piece of plastic still in place. On either side of centre front are vertical panels of pintucks with knife pleats on either side facing inwards. There are three small pink decorative buttons (1 cm) below the throat and another group of three buttons 10 cm below the first group. The top has a back opening fastened with 10 press studs. The back has two vertical panels of pintucks and knife pleats. The long sleeves have cuffs at the wrist (5 cm) with U-shaped split on upper side. Each cuff has three decorative pink buttons on one side of the U-shaped split. The lower edge of each cuff is trimmed with black lace (5 - 6 cm) that falls over the wrist. Machine stitched.costume, female evening, black silk top

This dress belonged to Mary Ann Henty [nee Lawrence] (1821-81), the wife of Francis Henty (1815-89). Her husband, Francis Henty, was the youngest son of Thomas Henty, who with his family, their retainers and property moved to the Australian colonies between 1829 and 1832. In 1834, Francis’ older brother, Edward, sailed from Launceston in Van Diemen’s Land to what was to become Portland in the western part of Port Phillip District [Victoria]. Francis, together with the first flock of Merino sheep [in Victoria], followed some months later. The first and second generations of the Henty family established vast pastoral properties in the Western part of the Port Phillip District. Francis Henty managed ‘Merino Downs’ near Casterton, while also living in his retirement at ‘Field Place' in Kew. The Henty Collection of nineteenth and twentieth century clothing, including outerwear and underwear, was collected, stored and exhibited over time by female family members descended from Francis and Mary Ann Henty. During the twentieth century, items from the collection were modelled in two fashion parades by various descendants [1937, 1959]. The items in the collection are historically and aesthetically significant, with provenance provided by oral and written tradition within or held by the family. A number of the items in the collection are very rare survivors, and provide researchers with the evidence needed to reconstruct the lives of notable women in the Port Phillip District [later Victoria] during the nineteenth and early twentieth century.A two-piece, moiré silk faille day dress, owned and worn by Mary Ann Henty, aged 59, while resident at Field Place, Kew. The fitted and panelled bodice on the day dress features wide velvet ribbon, hand sewn to form ‘V’ detailing at front and back. The front bodice hook and eye closure is decorated with handmade velvet covered buttons. The high round neckline is trimmed with pleated ivory fine tulle lace. The wide long sleeves of the bodice are also trimmed with velvet ribbon and buttons forming exquisite cuff detailing. The full length skirt and train are tucked into a fitted waistline band. The hemline is hand finished with wide velvet ribbon. A separate attached peplum is worn over the full bustle of the skirt. Measurements (mm): DRESS: Girth - Neck 355.6, Chest 889, Waist 673.1, Cuff 279.4, Hem circumference 4292.6. Vertical - Front neck to hem 1447.8, Front waist to hem 1117.6, Back neck to hem 1765.3, Back waist to hem 1346.2 , Sleeve length 590.55. Horizontal - Neck to sleeve head 196.85, Chest back 469.9, Underarm to underarm 457.2. PEPLUM Girth - Waist 711.2, Hem circumference 1066.8. Vertical - Back waist to hem 406.4.mary ann lawrence, francis henty, fashion -- 1880s, day dresses, women's clothing

The former Albion (West) Woollen and Worsted Mills is a functional structure which has been built in stages, possibly dating from the 1880s, with the earliest sections near to the Barwon River.The Worsted mill operated for about 50 years and at its peak employed around 500 people. In 1973 the mill merged with the British John Foster and Sons Company under some controversial stock and shareholding issues. The mill continued for a short period before closing at a time when much of the Australian textile industry was finding it difficult to compete with overseas operations. In the 30 plus years after the closure, the site was used for several ventures, including the Mill Vintage Markets and a vehicle trim manufacturing operation. In 2011 the site was purchased by Little Creatures of Western Australia to become their main brewery for the eastern states of Australia. Now owned by the Lion Group, Little Creatures started their 60 million dollar transformation of the old mill in 2012. Finally, in 2013 these former walls of industry were soon rattling away to the sounds of a different type of industry, as the first bottles of beer made their way out of the Geelong Little Creatures Brewery. The remaining building of the former Albion Woollen and Worsted Mills has historical significance as one of Geelong's major woollen mills. The venture has operated on the same site for more than a century. The Albion Woollen Mill was one of the four key sites along with Victoria, Barwon and Union Mills that was established in the late 1860s to mid-1870s. These mills were in constant operation on the west side of the Barwon Bridge over the last century and led to Geelong's fame as milling and scouring locality. The Albion Mill was probably the most successful survivor of the early private company operations. It was regarded as a model mill in the late 1880s and was, from all accounts, well-planned and organised with machinery on a par with the great mills of England. It produced high-quality tweeds. Together with the (now demolished) Union Mill it was regarded as the borough's principal industry over the 1870-1900 period and was one of Australia's most significant producers of tweed by 1900. These two mills were more successful, competitive and long-lived than the Barwon and Victoria Mills. The remaining building form is an important reminder of the private ventures of both the Albion and Union Mills and represents a key site of spinning, carding and finishing as well as scouring and dying that occurred in the lower section near to the river. The loss of the adjacent former Union Mill is unfortunate because the complex, together with the former Collins Union Mill office building, was an important reminder of the success of these industries and the reputation they earned for the Geelong region as a centre for quality textile products. Company seal embosser hand operated matte black & brass colour Western District Worsted Mills emblem on frontflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This clear ‘gallon’ type liquor bottle has been handmade by a glassblower from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. This bottle was made in a three part mould. The lower part was cylindrical, with a post in the centre that had an interchangeable mould with the embossed number in it. The sides of the mould gently tapering to the base, which allowed for ease of removing. The upperpart was in two pieces, one each side of the neck. The moth-blown glass formed the shape of the inside of the mould. The bottle was broken off the end of the glassblower’s pipe. Once removed from the mould the base was trimmed smooth. The mouth was then finished with the lip – there were many different styles of ‘applied’ lips, depending on the glassblower or his customer’s needs. This bottle would have been sealed with a cork. The surface of the bottle is a little bumpy and has bubbles, due to the blowing process. The meaning of the inscription is unclear. Perhaps it is a code for the bottle’s design, the date made or the maker. The bottle’s shape was referred to a ‘gallon’; six of these bottles would contain a total of a gallon of liquid. The bottle holds approximately 750 ml. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; clear glass, tall, cork-top style, handmade. Applied slightly tapered lip band. Bulbous neck, seams on neck, seam between shoulder and body. Neck and body have faint horizontal in the glass. Body tapers inwards towards base. Heel is thick and uneven. Shallow base with pontil mark and air bubbles. Inscription embossed into base. Bubbles and imperfections in glass. Sediment on surface. Mouth is chipped, surface is scratched. Bottle has polystyrene balls inside. Embossed into base “118”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, handmade, mouth blown, pontil mark, blown bottle, liquor bottle, 19th century bottle, collectable, bottle, clear glass, three piece mould