Seal skin straps and webbing were introduced into the Victorian Alps by European skiers. Enthusiasts travelled to enjoy the snow and to explore the Victorian Alps including the Bogong High Plains. This equipment enabled them to travel over snow without slipping when going up hills. They took the skins off when they wanted to slide down hills. In later years, waxes were used for cross country skiing and then 'fish tail' markings on the back of skis to enable skiers to travel distances up and down mountains. Later developments also included motor transport (replacing horses to get to the snow line) and roads to take skiers to the ski fields and mechanised tows to take skiers up mountains so they could ski down (downhill skiing). Skate skiing has also developed as another form of skiing.Skiers visited the Bogong High Plains during summer and winter to explore and enjoy the High Plains. The equipment used was a forerunner to the variety used today and the different types of skiing done today. Falls Creek was developed during the construction of the Kiewa Electric Hydro Scheme and was influenced by the number of Europeans working on the scheme and their desire to make use of the snow during winter.Each Seal skin has: Seal skin sewn onto one side of a strap of webbing. There is a webbing loop on the front that slips over a small point at the front of the ski. There is a webbing strap attached to the back of the seal skin sole coming over the back of the ski that clips metal fasteners onto a loop of webbing behind the boot.skiing. snow. high plains. seal skins. cross country skiing. alpine sports.

Photograph of Quoll taxidermy, part of the Quoll presentation at the Wooragee Hall on Friday, 27th February, 2004 as part of an event called Foxy Night Out. Foxy Night Out is part of a land fox control project. This workshop is conducted to help private and public community members to understand foxes and effective fox control techniques, and its impact to agriculture and other animals. Quolls are carnivorous marsupials native to Australia and New Guinea. They grow up to 125cm and weighs up to 5kg. The spotted-tail Quoll is now the largest carnivore on the mainland. Quolls have black to fawn fur, white spots, long and thin tails. Quolls can attack livestock like chickens. They are known for sharp teeth that enables them to sustain a diet that involves poultry meat. They hunt for their families. Historically, Quolls are treated as pests and were trapped or poisoned by people who are protecting their chickens.This photograph contributes to the scientific and historical records on fox control in Victoria. It reflects the effects of foxes and quolls to livelihood, thus, creates a picture of Victorian agriculture, trade, and community activities. Coloured rectangular photograph printed on matte photographic paperReverse: WAN NA / 0ANA2N0 BN2+ 2 1636 / (No. 5) 919foxes, quoll, landcare workshop, taxidermy, ecosystem, fox control project, agriculture, fox, marsupials, carnivore, pests

Black cover book, wire binding, 13 pages of text and maps. On front: Fosterville Gold Project' Map of ore body on cover - Central North, Central Ellesmere, Harringtons Hill. Contents include: open pits, heap leaching, waste dumps, estimated project life, changes from previously approved project, estimated project life, main project components, expanded open pits and underground mines, processing sulphide ore, tailings storages, waste rock dumps. Principles of rehabilitation, site preparation, rehabilitation activities during operation and decommissioning activities. Environmental issues, and summary of proposed new operating conditions.bendigo, mining, fosterville gold mine

A wooden, oval racquet with a concave throat, cloth tape supports, and fish-tail handle. Inscription across crown on obverse: THE DEMON. Model trademark is stamped on throat on obverse, featuring a horned demon's head device, with the text: THE/DEMON. Manufacturer's decal trademark across throat on reverse, comprises of a hexagram with the text: BEST IS BEST/S&S/L/THRO' THE WORLD. Retailer's decal below: LISLE FRASER/WHOLESALE/AND/RETAIL/SPORTING GOODS/... Inscription stamped along left side of stem and handle: SLAZENGERS (CANADA) LIMITED...MADE IN CANADA. Materials: Wood, Gut, Metal, Glue, Lacquer, Cloth tape, String, Painttennis

Early settlers had to clear the land of trees and shrubs to establish and maintain their farms and market gardens. Some settlers worked in the Gippsland region felling timber for transport by bullock wagons to Melbourne. Two-man crosscut saws were primarily important when human power was used. Such a saw would typically be 1 to 4 m (4 to 12 feet) long, and sometimes up to 5 m (16 feet), with a handle at each end. The technique in using a two-man saw involved a sawyer standing at each end and together the sawyers would alternate pulling the saw through the wood. If the kerf -slit- began closing, causing the saw to bind, wedges would be inserted behind the saw blade in order to keep the kerf open.Two-man saws were designed to cut in both directions. Careful tooth design was necessary to clear the sawdust during the cut. This is a typical two-man tree felling saw that was necessary to clear the land when the pioneers were establishing their market gardens and farms in Parish of Moorabbin c1850A long steel blade saw with 2 wood handles c1900tools, saws, axes, early settlers, pioneers, market gardeners, dairy farms, orchards, vineyards, timber mills, bullock wagons, tree felling, timber mills, city of moorabbin, county of bourke, moorabbin roads board, parish of moorabbin, shire of moorabbin, henry dendy's special survey 1841, were j.b.; bent thomas, o'shannassy john, king richard, charman stephen, highett william, ormond francis, maynard dennis,

This white oval plate with a dainty green border and self-pattern was made by the famous ceramics manufacturer Johnson Brothers of England. The pattern was patented on April 15th 1902. The serving plate is typical of dinnerware brought into Australia by migrants or importers of pottery and used in Australian households, giving many years of service. The Johnson Brothers firm was established by Frederick Johnson in 1883, at works in Hanley, Stoke-on-Trent. Frederick was later joined by his brothers Henry and Robert. The company's focus was to supply the export market. In 1968 the company became part of the Wedgewood Group. J. & G. Meakin Eagle Pottery temporarily took over the tableware division in 2000, and China took over all Johnson Bros. products in 2003. All of the Wedgewood Group was taken over by Fiskers in 2015, who discontinued the Johnson Brothers line of products. This serving plate is an example of domestic crockery used in Australia in the late 19th and early 20th centuries. It originated from England and was made by a well-known ceramic manufacturer.Plate, oval, earthenware, scalloped edge with impressed pattern and border of small green leaves. Maker's mark and name is on reverse. Pattern was patented on April 15th 1902. Made by Johnson Bros. of England.Maker's Mark; [Crown symbol] above "JOHNSON BROS, ENGLAND" "PATD APRIL 15TH 1902"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, dinnerware, serving plate, johnson bros, english serving plate, green leaf border, oval plate, platter, chinaware, plateware, crockery, chine, porcelain, earthenware

Contents: Ely family tree Frederick Ely was born in Cowlinge Suffolk, in 1838. (His parents were George Ely b1793 and Sarah Poulter b1792, both born in Cowlinge. Frederick came to Australia on the ship 'Ocean Monarch' in 1856 with (most likely) his brother George, aged 34, his wife Elizabeth Piper, aged 22, and daughters Elizabeth, aged 2, and Harriet, aged 1. George and his family settled in the Harcourt area of Victoria, as did his brothers William and Henry. In 1857, Henry, his wife Mary Anne (Parker) and a daughter came to Australia, and settled in Greensborough for a short time, then moved to Harcourt, taking a large amount of apple tree cuttings and plants from Greensborough, where he, brother William, William Eagle, a childhood friend from Cowlinge, and a Nathan Vick, planted and stated apple orchids.History of the origins of this Greensborough family.20-page plastic binder, spiral bound, clear cover. Contains documents relating to the Ely family.Collected by Greensborough Historical Society. Folder commenced 2012.ely family, splatt family

7126-3 Beryl Cox receivieg her 10 year Certificate from Mayor Don Gardiner, wathed by Gail Wood, Jeanie Skurrie, June Radford. 7126-3A: Coral Eagles, Mayiam Scott. 7126-3B: Leanne Birtsal, elenor Musumeci. 7126-3C: Afternoon Tea. 7126-3D: Rae Smith, Linda Owen. 7126-3E: Mayor & Mayoress Mr & Mrs Don Gardiner, Our President Mr Doug Hately. 10 year Certificate Presented to 7126-3F -3G: Darol walscott, Rae Smith, Beryl Cox & Doug Hatley. 7126-3H Betty Crouch, Jill Riddler, Ian Howell, Terry Howell. 7126-3I: Betty Crouch, Jill Riddler, Ian Howell, 7126-3J: Jill riddler, Ian Howel & Terry Howell. 43 Colour Photographs Showing various people at the 10 year celebrations.

This dress belonged to Ethel Nina Blundell (1876-1949), having been first made for her mother Jane Blundell (nee Burkitt, 1845-1878). Born in Dublin, Jane married James John Blundell Jr at the Black Street Congregational Church in Brighton on 16 March 1874. The Blundells were a socially prominent Brighton family who played an important role in the development of the area. James' father, publisher and bookseller James John Blundell Sr, served as a Brighton Borough Councillor between 1862 and 1867 when the local government was still in its formative years, including holding the position of Mayor in 1864. He was involved in the foundation of the Brighton Volunteer Rifle Corps and was also a strong supporter of the Brighton Ladies Benevolent Society. The Blundell family were active members of the Brighton Congregational Church and supported the construction of the Black Street church, where James Jr served as a deacon for sixty years, in addition to his work in the Crown Land and Survey Department. The dress is believed to have been made for Jane in 1875 or 1876 during her early pregnancy, likely by a local dressmaker. Jane died in 1878 when Ethel was very young, and Ethel was then raised by her father and paternal grandmother. As she never married, Ethel remained living in the family home of 'Eumana', 164 Church Street, and as an adult she assumed the role of hostess whenever she or her father had guests. On these occasions, she reportedly wore her mother's dress. The family home was sold on James Jr’s death in 1924 and Ethel was living at 52 Black Street Brighton when she died in 1949. In the 1930s, Ethel gifted the dress to a close family friend, Dr Jean Kelly. She told Jean that the garment held precious memories, perhaps due to the connection it provided to the mother she had never known. Jean donated the dress to the Merimbula Old School Museum in NSW in 1987, where it was on display for many years. The Museum donated the dress to Brighton Historical Society in 2023.This is a good example of a late nineteenth century day dress, made from two different patterns of russet brown silk brocade and featuring a lobster tail style bustle. The lack of boning combined with waist and hip measurements indicates it may have been made as a maternity dress. It is lined with beige leaf pattern cotton fabric. The princess line fitted bodice of herringbone pattern brocade has a high round neck with small 'mandarin' style collar and buttons down the front to below the waist where it forms an overskirt which is bordered with a band of coffee bean patterned brocade. The overskirt drops down to hem length at the back but from the centre front it is draped up to the back to a point below the waist level. Here it is sewn to the edge of the lobster tail style bustle which is also bordered by the coffee bean fabric. There is a concealed pocket with the opening under the right edge of the bustle. The buttons on the front of the dress have a decorative circlet of small blue flowers around a russet silk covered dome. The long sleeves are set in and slightly full with a contrasting three pleat band of coffee bean fabric with an ornamental turn back from the pleats sewn just above the wrist. The skirt section of the dress is in four 20 cm bands of alternate fabric patterns with the top and third band of coffee bean pattern slightly gathered and the second and fourth bands of herringbone forming pleated ruffles.1870s, ethel nina blundell, jane blundell, jane burkitt, eumana

Royal Australian Air Force officer’s cap.Navy cotton drill peaked cap with black crossgrain band around exterior. Two black eyelets sit above band on either side. Black patent leather chin strap attached by two gold buttons on brim, slightly misshapen. Embroidered patch carrying a red velvet and metal crown (Queen Elizabeth II era) with blue, green and red embroidered knots mimicing jewels, sits above a gold eagle above now tarnished gold leaves. Interior sweatband in patent leather with plastic layer on top interior, underneath which is a manufacturer’s label with red ink. Strip of folded newspaper (H06.2) inserted inside interior sweatband.Label reads “M.TX/SIZE 6 7/8/A [broad arrow] F/MADE IN AUSTRALIA”. Black ink stamp on inside of sweatband reads “M. TX” inside a circle and “S19/[broad arrow]”raaf, royal australian air force, officer

This early tobacco tin was manufactured in England and imported to the "colony" Australia at the beginning of the 1900s. This manufacturer had won the Gold Medal at the Liverpool International Exhibition in 1884. This tobacco would have therefore been very expensive to purchase making it a must for the wealthier client of the Kiewa Valley. The Golden Flake Cavendish smells of the man of wealth and position. In this era the type of dress and the brand of tobacco smoked showed everyone at first glance where the man using it was on the social ladder and his pecking order. With the demise of tobacco smoking in the early 2000s clothes themselves do not show the pecking order in that quickly visualised manner, as at the time of manufacture of this tobacco tin. In the 21st century the level that men are in the socio economic field is realized on "the social information" available on the internet.This tobacco tin relays a long ago era, when personal contact, and not something that has been written down by some "unknown", was valued as the true appraisal of a member of the community. This was especially relevant in a small regional area such as the Kiewa Valley. Although social networking was not as fast then as the internet provides now, appearances, manners, fashion and etiquette with first impressions high on the order of evaluating someone in the community. Pointer such as the brand of tobacco smoked was part of the rural assessment method. Up until the demise of the Australian Tobacco Industry, circa 2004, the Kiewa Valley and surrounding district was part of a vibrant producer of tobacco leaves. The remnants of this industry still remain today but the drying sheds (for tobacco leaves) are now used to store hay for the valley's dairy and beef cattle industries.A dark metal tobacco tin covered in a bright metallic gold fleck pattern with a black frame on the lid around a drawing of a woodsman with a musket and axe sitting on a stump overlooking a valley that reads "Pioneer Brand", next to a company seal incorporating a wreath, eagle and shield. The front side reads "Richmond Cavendish Co./ Limited/ Liverpool." and the right and left side "Golden Flake Cavendish". The bottom has the same woodsman feature as the lid. The back side is an elongated diagram featuring tobacco leaves and plant summit. Inside lid surface has a half torn coloured (red, black and green) sketch on paper of the woodsman scene depicted on the top lid.The following inscriptions are displayed on the top and inside lid and on the bottom tobacco tin: "PIONEER BRAND" and to the left of the scene the "SEAL OF THE COMPANY TRADE MARK" Both side of the ens have the following words in large thick print "GOLDEN FLAKE CAVENDISH" and each is contained withih a black boarder.pipe tobacco, cigarette tins, smoking accessories, personal effects, tobacco containers

It appears that items .1 , .4 and .5 are insignia worn by members of the Royal Australian Air Force. It also appears that items .2 and .3 were gifts by members of the force for a friend or loved one. The origin of the two star shaped items is unknown. The Royal Australian Air Force was formed in 1921, being evolved from the Australian Flying Corps., the aviation section of the Australian Army in World War One. These items are examples of military insignia pertaining to the Royal Australian Air Force and are retained for display purposes..1 Propeller khaki cloth badge with red and black embroidered symbol of a propeller .2 An oval badge featuring a gold and red eagle with wings outstretched and a gold and red crown above embedded in a black transparent material. A safety clip is attached by two chains to the badge .3 A metal oval with a bronze stylised propeller attached through two holes in the metal base to a silver coloured safety pin at the back. .4 and .5 Bronze five pointed star shaped three dimensional badge. The centre of the star has a rosette. One has a single brass clip on the reverse. The other has two clips. Otherwise they are identical. Nilmilitary insignia

The Satin Bowerbird is commonly located around the eastern and south-eastern coast of Australia. They reside in wetter forests and woodlands, and nearby open areas. They feed mostly on fruits throughout the year but in summer will supplement their food supply with insects and in winter with leaves. The Satin Bowerbird is most commonly known for it's practice of building and decorating it's bower. They will often collect objects of bright blue to decorate the bower including straws, clothes peg, parrot feathers, pens, marble, string, glass and bottle tops. This decoration is done by a male Bowerbird in the effort to attract females. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.This taxidermy Satin Bowerbird specimen has dark black/blue glossy plumage and a pale coloured bill of small size. The bird is of a medium size compared to other species of birds and has pale legs with short talons. The eyes are made of strikingly blue coloured glass which represents the violet-blue iris of this bird while living. The bird has a short tale and has been stylized in a leaning/crouched position with it's back arched upwards and head out long. This specimen stands on a small platform and there is some deterioration to the tail feathers which protrude beyond the platform which may have otherwise provided some protection. Donor - Mr. E.T. / BH. RO. /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, australian birds, bower, bowerbird, satin bowerbird

Grey Butcherbirds live in wooded habitats, including suburban areas, from the north of Western Australia, across different parts of the top of the country, through to mid-eastern Queensland, and then south along the eastern side of the country all the way down to Tasmania. They have a 'lovely, lilting song', and are fiercely protective of their nests and chicks, swooping at presumed attackers with enough strength to sometimes draw blood. Adult Grey Butcher Birds are typically a light grey colour with dark heads and white underparts. The brown colouring on this animal suggests that it is a young bird, with its grey adult feathers coming in. This bird appears thinner than most Grey Butcher Birds, but it is unclear if this is because of its age or because of inaccurate taxidermy. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century. This specimen is particularly special in the Burke Museum Collection as it is part of a male/female pair (see Relationships). Many birds in the collection were originally donated in male/female pairs, but at least one specimen has been lost, leaving these as one of the few surviving sets.This Grey Butcher Bird (likely female, based on size) has a light grey and brown bill with a sharp hook. The majority of the feathers on its back and tail are an olive-brown colour. The feathers of its underparts, the patches on either side of its bill, and two stripes coming up either side of its neck are a yellow-white colour. There are some light grey feathers coming through in small patches, particularly across the back, the top of the underparts, and along the upper half of the legs. The eyes are brown. The bird stands on a brown, wooden perch with a circular bar, curved stand, and circular base. It has an identification tag tied around its right leg.18a. / Collared Crow. Shrike / See Catalogue; Page 10. /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, australian birds, butcher bird, butcherbird, grey butcher bird, collared crow-shrike, australian butcherbird, tasmanian butcherbird, tasmania, bird pair

The Blue-faced Honeyeater is commonly located in northern and eastern mainland Australia. It is also found in Papua New Guinea. This species prefer to reside in tropical locations or those which are sub-tropical and wetter temperate or semi-arid zones. It can be located in open forests and woodlands close to water. Due to these locations along with it's propensity for feeding on the fruit and flowers of the banana in northern Queensland, this species is colloquially known as the "Bananabird". These birds commonly reside in pairs, family groups or small flocks. They can often be found socialising with other species including the yellow-throated miner and the Little Friarbird. The Blue-faced Honeyeater feed on insects and invertebrates, but also may eat nectar and fruit from native and exotic plants. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The blue-faced Honeyeater is large in size with bright white and black colouring. The bird also has golden olive-green colouring on it's rear, tail and wings. Around the eyes is strikingly blue coloured skin which has faded significantly on this particular specimen. It also has a pair of glass eyes to replace the original which do not survive the taxidermy process. There is a patch of dark colouring on the plumage of the stomach and neck of the bird. This dark batch is surrounded by white plumage which also forms a white band across the back of the neck. This specimen is stylized placed on a wooden mount. The bird's feet are attached to a thin stick and the stick attached to the mount.taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, honeyeater, blue-faced honeyeater

The Common Buzzard is part of the buteo genus (Latin for buzzard or hawk) which indicates it is part of the raptor group whose features include a medium to large build, a strong body and larger wings. The family includes birds of prey such as hawks and buzzards. Like their name suggests, Common Buzzards are very ‘common’ in the UK but can also be found in other parts of Europe, Africa and Asia. The birds’ habitat consists of woodland, shrubland, forest, wetlands and countryside, and they can live in cold, tropical and temperate climate zones. Similar to other raptor species, Common Buzzards make their nests in tree branches or tree forks. With finely tuned hearing, they are able to detect small marsupials, and their diet consists of small amphibians, birds and mammals. Normally solitary, these raptors can occasionally be seen with others. Common Buzzards are classified as of ‘Least Concern’ on the IUCN Red List. While there is some noticeable fading of this particular taxidermy specimen’s plumage, it is relatively well presented. The completely black eyes and string through the nose of the specimen seem to be taxidermy/curatorial choices, as this is not something that is normally found on living versions today, and the eyes of Common Buzzards are normally golden eyes with black pupils. It is interesting to note, when considering the selected artificial eyes, that the original swing tag labeled this specimen as Saleo tinnunculus Lina, a form of kestrel (known to have complete black eyes), which perhaps explains this taxidermist choice. As a Common Buzzard, this particular specimen could have had its frame and breast area bulked out a little more, as birds within the buteo genus are generally recognised to be of medium to large build. Overall however, this is a fairly reasonable and accurate representation of the species. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.With similar colourings and features to a range of raptor species, the Common Buzzard can often be mistaken for other varieties of buteo and raptor. The bird’s plumage generally varies by location, but normally includes a variety of shades of brown, commonly with darker brown on its back and lighter coloured feathers on its breast, underbelly areas and face. These birds normally have fine bands on their tail and darker tipped wings. Common Buzzards have smaller heads with a band of yellow around the base of their small curved beaks and golden yellow eyes. This particular specimen’s feathers have faded and he stands upon a wooden perch with an identifying tag hanging from its right leg.Swing Tag: Swing tag obverse seems to read: ‘…io [? First few symbols aren’t clear]/ Saleo /tinnunculus/ Lina [there is also another illegible symbol on the tag in the centre on the second line] Swing tag reverse: illegible sections of text and the beginning of a number ‘403…[?]. Metal tag: 1032[?]taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, common buzzard, buteo, hawks, raptors, birds of prey, buzzards

"Victoria the Golden" documents life in Victoria between 1850 and 1862 as viewed by artist William Strutt. Momentous events in the Colony’s history such as Separation Day (1 July 1851), the sitting of the first Legislative Council (13 November 1851), the death of Burke (June 1861) and the Black Thursday bushfires (6 February 1851) are depicted. In 1907 the Premier of Victoria Thomas Bent purchased "Victoria the Golden" from Strutt for £120 and presented it to the Library. The album depicts events in chronological order with what Strutt considered “fidelity to nature and accuracy”, so that present day Victorians may view the sketches “as records of what we may now look upon as the dim past in the rapidly progressive history of Victoria”. Victoria the Golden is celebrated as one of the Parliament’s great treasures. It is a testament to William Strutt’s skill as a draughtsman and contains over 100 assorted images which were executed between the years of 1850-1862. Strutt’s particular talent was to be able to step back and record each event with particular care to detail. Many of the pieces contained within this album are littered with notes, such as the correct resting position of a corporal’s sword or details about the cloth and cut of a subject’s jacket. Strutt also notes in one of his many sketches of the new Legislative Council chamber at Spring Street that the President, Sir James Palmer, is seated ‘a little too high’ (page 30). Throughout the album, Strutt’s illustrations bring to life the diverse nature and peoples of the new colony. His range of subjects is comprehensive and includes parliamentarians, lawyers, wives and daughters, merchants, labourers, police and military officers, indigenous communities, farmers, miners, prisoners and explorers. The everyday and the extraordinary are depicted with each turn of the page. 44 leaves heavy card, approximately 1mm thick. Sketches, watercolours and prints of varying sizes and papers are glued onto the pages. Full leather binding in blue leather with title and decorative border in gold. There are four raised bands on the spine, with gold decoration on the bands and at the head and tail of the spine. Marbled end papers and flyleaves. Gold on the edges of the book block. Card pages have a sheet of mottled blue paper on recto. Album leaf connection is a guarded system with stiff stubs and cloth hinges. Each page has a sheet of glassine paper attached at the binding edge to protect the images. Many pages stamped with "Parliament of Victoria" verso. Printed in gold, recto: "VICTORIA THE GOLDEN/ SCENES,/ SKETCHES,/ AND JOTTINGS FROM NATURE./ BY/ Wm. STRUTT/ MELBOURNE, VICTORIA./ 1850-1862" First pages include handwritten 'introductory remarks' and index of plates.parliament of victoria, colony of victoria, separation day, victorian legislative council, burke and wills expedition, wills, william john, 1834-1861, burke, robert o'hara, 1821-1861, strutt, william, 1825-1915, bent, thomas sir, 1838-1909, native police corps, fawkner, john pascoe, 1792-1869, black thursday bushfires, gold rush, princes bridge, melbourne

Grey Butcherbirds live in wooded habitats, including suburban areas, from the north of Western Australia, across different parts of the top of the country, through to mid-eastern Queensland, and then south along the eastern side of the country all the way down to Tasmania. They have a 'lovely, lilting song', and are fiercely protective of their nests and chicks, swooping at presumed attackers with enough strength to sometimes draw blood. Adult Grey Butcher Birds are typically a light grey colour with dark heads and white underparts, while their young are typically olive-brown. The mix of these two types of colouring on this animal suggests that it is a younger bird. This bird appears thinner than most Grey Butcher Birds, but it is unclear if this is because of its age or because of inaccurate taxidermy. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century. This specimen is particularly special in the Burke Museum Collection as it is part of a male/female pair (see Relationships). Many birds in the collection were originally donated in male/female pairs, but at least one specimen has been lost, leaving these as one of the few surviving sets.This Grey Butcherbird (likely male, based on size) has a bill that is dark grey at the front with a sharp hook but becomes lighter towards the face. The majority of the feathers on its back are light brown with some grey feathers around the lower half. It's crown area is a dark black colour and its tail is a dark grey. The feathers of its underparts and a small patch on either side of the neck are a yellow-white colour. There are also grey feathers coming through on its underparts. The eyes are brown. The bird stands on a brown, wooden perch with a circular bar, curved stand, and circular base. It has an identification tag tied around its left leg.19a / Collared Crow. Shrike / See Catalogue, Page 10 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, australian birds, butcher bird, butcherbird, grey butcherbird, collared crow-shrike, australian butcherbird, tasmanian butcherbird, tasmania, bird pair

This photograph was taken during one of a series of workshops that were hosted by the Wooragee Landcare Group in the year 2004. In line with the main goals and missions of the Wooragee Landcare Group, these workshops aimed to promote biodiversity and land protection in the local area. Many of these workshops focused on either the protection of the endangered tiger quoll (spotted-tailed quoll) or the handling of fox infestations. Though the specific date of this photograph is unknown, it can be confirmed that it was taken outside of Wooragee Hall. Featured in the photograph, from left to right is: an unknown person, Jerry Alexander, Tony Prowse and Mary Prowse. The presence of wildlife ecologist Jerry Alexander suggests that this workshop focused on the tiger quoll, with possible exploration of its potential habitats (suggestive due to the outdoor location). The Tiger Quoll is the largest of the quoll species. Largely resembling a cross between a possum and a cat, the quoll is distinctive due to the white spots that are often found all over its brown fur.This photograph is significant as it provides evidence of a project undertaken by the Wooragee Landcare Group to educate members of the public on the tiger quoll in the early 2000s in an attempt to better understand and protect the species. The Wooragee Landcare Group has been instrumental in the co-ordination of programs relating to biodiversity protection in the local area, providing great assistance to landholders.Landscape coloured photograph printed on gloss paper. Reverse: WAN NAO1EONAON2. NNN- 1 1981 / wooragee, wooragee hall, wooragee landcare, wooragee landcare group, quoll, spotted-tailed quoll, tiger quoll, jerry alexander, jerry alexander ecologist, jerry alexander wildlife, tiger quoll habitat

A moulding plane is a specialised plane used for making complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmaker's shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. This item may be a one off item made by a cabinet maker for a particular project as the plane is not marked resulting in no history or manufacturing provenance available.A vintage tool made by an unknown maker, this item was made commercially and by individual cabinet makers for particular furniture projects that could produce an ornamental finish to timber. The tool was used before routers and spindle moulders came into regular use after World War l l, a time when to produce a decorative moulding for a piece of furniture, door trims, etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant early tool that today is quite rare and sought by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Plane, wooden, narrow blade. Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, wooden plane, wood working tool, boat building tool, tool, woodwork tool, plane

Shire of Eltham Archives: Series 69, Item 2 This video was produced for the Shire of Eltham in response to the 1985 Victorian Local Government Commission Report titled ‘The Restructure of Local Government in Victoria – Principles and Program’ (the Morris review). The recommendation was to amalgamate the Shires of Eltham and Diamond Valley, something that Eltham Council did not support as being appropriate for the shire or compatible with the 'Spirit of Eltham'. The video features Shire President, Cr. Mary Grant talking with the Hon. Pauline Toner MP and Max McDonald MP. Eltham Shire CEO Rodney Roschellor presents an alternate proposal for a shire merging more aligned to the 'Spirit of Eltham'.Also featured are Eltham icons such as the Eltham Railway Trestle Bridge, Montsalvat, Eltham Community Centre along with mudbrick making, artist Matcham Skipper, the Green Wedge and St Andrews Market. Other commentary is provided by locals Judy Wadham and Lester Eaton.VHS Video cassette Converted to MP4 file format 00:10:56; 73MBcouncil amalgamation, cr. mary grant, eltham community centre, eltham railway trestle bridge, eltham shire council, green wedge, judy wadham, lester eaton, matcham skipper, max mcdonald, montsalvat, morris review, mudbrick construction, pauline toner, rodney roscholler, shire of diamond valley, shire of eltham, spirit of eltham, st andrews market, video recording, shire of eltham archives

Seems to be a non- collapsible mask. Otherwise is a similar, thinner variety of Murray's mask, which was used for the administration of choloroform. John Murray was born in England, 1843 and described his wire mask in 1868 as a young chloroformist at Middlesex Hospital. It was wedge-shaped and made of thick wire and designed to be folded. The removable cover was originally made of several layers of flannel. Murray’s mask became very popular, especially in Australia, and was generally used with a single layer of flannel without an aperture or opening, as is this example. John Murray was an enthusiastic and innovative physician who also had an interest in nitrous oxide anaesthesia and conducted a series of experiments with J. Burdon Sanderson on dental patients comparing nitrous oxide to pure nitrogen. His career was short-lived and he died just before his 30th birthday. (Ball, C 1995, 'Cover Note: Murray's Chloroform Mask', Anaesthesia and Intensive Care, Vol. 23, No. 2, pg. 135)Triangular shaped wire mask covered by flannel. The flannel is sewn over frame and stitched around the base and along the vertical wire. The style and shape is similar to Murray's mask, which was used for the administration of chloroform, however this variation is not collapsible like Murray's mask.dr [e.s] holloway, mask, dr j. murray, chloroform

Medals x 2British War Medal & Victory Medal The British War Medal has an effigy of George V on the obverse. The reverse has an image of St. George on horseback trampling the eagle shield and the skull and crossbones, the emblems of death. Above this is the risen sun of victory. The years 1914 and 1918 are contained on the outside edge medal. The Victory Medal is bronze with a figure of Victory on the obverse. The reverse has the inscription The Great War For Civilisation surrounded by a laurel wreath.

The receipts and expenditure of the EagleHawk RSL Sub Branch cover the years 1960 - 2005. On the final entry a note in red pen dated 28.2.2005 that this was the close of business and the amalgamation of the Eaglehawk RSL Sub Branch with The Bendigo RSL, a final date under is 7.03.2005.Receipt expenditure book, spine and corners are brown leather suede, front & rear face is green buckram, a label on the spine Has "CASH BOOK", ruled lines in blue /red, vertical lines in red. The entries are in blue pen and some minor points in red. On the first page is a typed letter pasted in re a 5 Pound School Scholarship from the Eagle Hawk RSL per year. At the rear is a hand written note with a list of 12 names being the "Foundation Members". Lose is an invoice for the use of the Eaglehawk building by the Electoral Commission re the use of the building for $300.00. Last is a letter from the Commonwealth bank re the merger of the State Bank of Victoria with the Commonwealth.brsl, smirsl, ehrsl, expenditure,

John William HARKIN. No. 170317, Enlisted 27.06.44, Age 18. Discharged 6.12.48. Rank of LAC in 381 (B)SQD.1. Dress coat - navy blue colour wool fabric, black colour, cotton lining with beige colour cotton lining to sleeves. Buttons - black colour bakelite with metal shank, emblazoned with the King's Crown and a Wedgetailed eagle in flight WW2. On sleeves - Australia shoulder patch with wings and a propeller patch. Right sleeve - gold, blue and red colour "British Commonwealth Forces" patch. Makers label back below collar. 2, Trousers - navy blue colour wool fabric, owners label inside back, 5 button fly. 3. Trousers - navy blue colour wool fabric, makers size label inside back, 4 button fly.1. Maker's label - red embroidery on cotton fabric "M TX/ Size 18". Handwritten black ink "HARKIN'. 2. Owner's label - black ink on cotton "HARKIN/JW/ R.A.A.F." 3. Maker's label - blue ink print on cotton "N384/1942/ SIZE 24". Maker's label on back of trousers - dark blue print on paper - "AIRMEN'S/ TROUSERS'/ 18oz/ Size 24/ Waist 37../ Height 5'9"to 5'10". Black ink stamp "I/ E.C."uniforms, raaf, ww2

Captain Robert Ure Bain was Adjutant to Lt. Col. Bush, POW Group Commandant from 1942 - 1947. He was chosen to be one of the Australian Army officers who escorted the German POW's back to Germany in January 1947. A German POW and former member of the Afrika Korps made the item and donated it to Robert.Afrika Korps banners, embroidered, one piece of material. Large hemmed square of white/ cream cotton material embroidered with two unfinished Afrika Korps banners. Line drawn around both, to indicate edge/cutting point/unfinished embroidery point. The photograph show banner 1 which has a palm tree & swastika (emblem of the Afrika Korps). Swastika has been left outlined in pencil but not embroidered, probably so as not to create trouble by displaying the now banned swastika: Banner 2 has red stylised German eagle over the number 8. Also in picture is a model of an aeroplane and a framed coat of arms with Braunschweig (a place in north west Germany otherwise known as Brunswick).Banner 1: Afrika Korps (pink lettering); 1941 (light blue lettering). Banner 2: Zullighau (brown/gold lettering); 4. KOMP / M. G. BATL. (green lettering). (Number 4 company of the Machine Gun Battalion); framed coat of arms "Braunschweig"afrika korps, internment camps, camp 13, garrison, military, handcrafts, embroidery, captain robert bain, german pow's

http://en.wikipedia.org/wiki/Horse-drawn_vehicle http://www.coyaltix.com/lamps.htmlThe candle light needed to be protected from the wind. This removeable light or lantern has 4 sides with 2 oblong bevelled glass panals, 3rd panel is plain with a heat vent and the 4th opens to light the lamp and has a 4.5 cm round red glass which would act as a reflector. The candle holder screws out to allow for a narrow candle to be inserted. It has a black ventilated cover on top and has slide fixture to attached the lamp on to the carriage. . Powerhouse Museum Collection Thesaurus Protected lamps or lanterns, fixed or removable, used on coaches or carriages. Commonly made of brass, they often were fitted with reflectors as well as red lenses to serve as tail lights (Art and Architecture Thesaurus).red and clear glass lenses light candle reflector bevelled glass horse buggy tail light