The 8th Light Horse (Indi) Regiment superseded the 16th Light Horse in 1919. It had its headquarters at Benalla with sub-units throughout the Upper Murray and Northeast Victoria. In December 1941, the regiment converted from horse to mechanised, initially as 8th Reconnaissance Battalion then in July 1942 it became 8th Cavalry Regiment and served in Northern Territory. As Japanese threat to the mainland declined the regiment was disbanded. Soldier thought to be J Bell of Wangaratta.Shows horse linesBlack and white photograph of soldier in horse lines.horse, 8th light horse

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 the Regiment was deployed to Merauke, Dutch New Guinea. Upon its return in April 1945, the Regiment was redesignated 20th Pioneer Battalion. It was disbanded following the end of the war. 20th Light Horse was the only light horse regiment to serve overseas in WWII.One of a collection of tankards donated by officers of a citizen soldier regiment in rural Victoria. It is in excellent condition.Silver plate tankard engraved on side with donor's name and date.20th Light Horse Regiment / presented by / Capt V A McLeish /1936military, 20th light horse, mess, drinking, silverware

Photograph of Dinah Lee, Wayne Stephens and Ash Power taken at the Vietnam Veteran's Motorcycle Clubrooms at the unveiling of a commemorative wall to honour the 521 personnel who died during the Vietnam War on the 50th Anniversary of the Battle of Long Tan in August 2016. Dinah LEE - Lee entertained troops in Vietnam in the late 1960s on Australian Broadcasting Commission-sponsored tours and was awarded the Vietnam Logistic and Support Medal. Wayne STEPHENS - Vietnam Veteran and Victorian President of the Vietnam Veteran's Motorcycle Club. Ash POWER - Lt. Gen (Rtd) President of Wangaratta RSL Sub BranchBlack frame and mount containing colour photograph of two males either side of a female - all wearing jackets with colour badges/patches.50th Anniversary of the Battle of Long Tan 2016 Lt Gen (Rtd) Ash Power, Dinah Lee, Mark Stephensvietnam war

The photo shows miners looking for gold at Dead Horse Creek at Club Terrace. The subjects are unknown.This is a pictorial record of gold mining in East Gippsland in the late 19th century.A yellowed black / white photograph on grey buff card. It is of seven men in the bush mining for gold.on back - "Dead Horse Creek - Club Terrace, 1897"gold-mining gold-panning-club-terrace dead-horse-creek-gold

Cocks Pioneer Office and Milne's horse and cart. Cocks Pioneer Electric Gold & Tin Mine Company was formed in 1899. The company's first power station, located at the eastern end of the valley began operating with its 340 Kilowatt steam-powered generator. By 1909, from 2,500,000 cubic yards worked, reported recovery was 17,284 ounces of gold and 224 tons of tin ore. By 1909, Cocks Pioneer’s power plant had become inadequate and uneconomical. The barge was floated downstream about a mile, but lost time caused the operations to cease. Following testing, a new mine was established by diverting Reid's Creek at a cost of £25 000. Settling dams were built, one of which held 1,935,900 cubic feet. Sold earth banks, built against a wall of stringy bark saplings constructed and laced with vertical props, were built. In 1914, the company was reformed as Cock’s Pioneer Gold and Tin Mines NL, another power station was constructed at the western end of the township, near the junction of Clear and Reid's Creeks. From 6,800,000 cubic yards of material processed, the returns were 64,397 ounces of gold and 855 ton of tin. Cocks Pioneer mine then moved the barge downs stream and continued sluicing. In 1929 Cocks Pioneer Electric Gold and Tin Mining Company ceased operations due to a drop in values. Cock’s Pioneer Gold and Tin Mines NL carried on large-scale hydraulic sluicing operations until 1941. Handwritten on image: COCKS, PIONEER GOLD MINE, ELDORADOmines, mining, horses, cart, transport, gold, tin, gold mining, tin mining, buildings, cocks pioneer, el dorado, eldorado

Chain part of a horse bit imported and sold by Holden and FrostAs imported and sold by Holden and FrostLead curb chain, part of a horse bit equine, chain, military, civilian

Second Cavalry Division conducted camp of full time training at Torquay near Geelong Victoria from January to April 1940. One of the regiments attending was 8th Light Horse. This was one of the last large gathering of horsed cavalry in Victoria. The 8th Light Horse (Indi) Regiment had its headquarters at Benalla with sub-units throughout the Upper Murray and Northeast Victoria. In December 1941,the regiment converted from horse to mechanised, initially as 8th Reconnaissance Battalion then in July 1942 it became 8th Cavalry Regiment and served in Northern Territory. As Japanese threat to the mainland declined the regiment was disbanded.Images of citizen soldiers from North East Victoria at beginning of world War 2.Collection of six black and white photographs of 8th Light Horse in camp near Geelong, January to April 1940.Shows mounted horsemen,tents and horse lines.training, camp, torquay, cavalry, 8th light horse regiment

Churchill Island Heritage Farm has a large photograph collection dating from the nineteenth century. Photograph of a horse harness resting on a wooden fence.Catalogue number written on reverse in pencil Written in pen on reverse 'Working horse harness on post + rail fence Churchill Island Easter Festival 30/3/2013'churchill island, photograph

Used by the Light Horse Brigade in WW1. Donated by the family of Fred Christmas.This WW1 item is a reminder of those who took part in that conflict.A pair of dark brown horse leggings. Straps run around outside to a buckle. They are 'Light Horse Brigade" leggings from World War 1.horse-leggings transport ww1 light-horse-brigade

General Allenby Inspecting 3rd Light Horse Brigade, Tripoli.General Allenby Inspecting 3rd Light Horse Brigade, Tripoli.general allenby, 3rd light horse brigade, horse, tripoli, war, ww1, world war 1, australia, a.i.f, australian imperial forces

Used for the treatment of cuts and wounds on Horses and Cattle Ca 1900As imported and sold by Holden and FrostSquare glass jar with screw on lid, paper label attatchedFlints Medicated oil for cure of Cuts and wounds on Horses and Cattleflints, medicated oil

Glass bottle container for Elliman's horse linement Ca 1900Imported and sold by Holden and FrostClear glass bottle with open neck with inscription on front and bottom Elliman's Royal Embrocation for horses Manufactory Slough. On bottom 12399bottle, medicine, equine

Used on Horse tackle during 1800.s and early 1900's and Imported by Holden and FrostUsed and sold by Holden and Frost C1900Brass buckle as used on Horse Bridlesequine military, military, civilian c1900, buckle

as used on dray and cart horses circa 1900manufactured and sold by Holden and FrostBrown leather straw filled oval shaped horse collar to fit over horses neck. Two buckles and leather straps on narrow end for fastening collarcollar, horse, agriculture

Information from Norman F. Dalton: Ballarat had a reticulated DC supply in the early part of last century and in 1905 had sufficient generating capacity to enable the trams to be changed from horse drawn to DC electricity. The use of electricity increased with the main power station located on Wendouree Parade, near Webster Street, under the ownership of The Electric Supply Company of Victoria. AC generating plant was installed in 1925 and conversion to AC proceeded. In 1934 the company was taken over by the State Electricity Commission Victoria (SECV) and more AC generation was installed and the changeover of customers was accelerated. This is around the time that the Synchronome Frequency Checking Mast Clock was installed at the Wendouree Parade Power Station. The SECV Annual Report of 1921 states: ::Section 11 of the act directed the COmmission to enquire into the question of securing the adoption of such standards of plant and equipment of a system, frequency and pressure for the generation and distribution of electricity as will admit of the efficient interconnection of undertakings throughout the State. In 1934 when the SECV took over the Ballarat operations the question of linking with the State grid had been a planned operation for some years but due to financial considerations had hindered it and in fact would continue to do so for a further 10 years. So while the need for close frequency control for interconnection was hardly an issue, the need to keep electric clocks correct was important, particularly as this item was a frequent sales point to cover the inconvenience and sometimes expense of converting from DC to AC. The clock is a very accurate pendulum clock with provision for varying effective length during operation for precise time regulation. There are two normal time dials and one is controlled by the pendulum and the other is operated by the system frequency. When the clock was in use it was installed by the MEter and Tests Laboratory and the time was checked daily by radio time signals. The two dials were repeated in the operators control panel in the Power Station. A maximum deviation between the two dials was set in the operating instructions (eg 5 seconds) and the operator would correct this when necessary by remote manual alteration of the turbine governor set point. The clock was used to drive and regulate a system of "slave" clocks which were used to display the time in various locations around the power station. A slave clock is a simple clock which is driven by a small electric motor, its accuracy is regulated by the master clock every 30 seconds to ensure that it and all the other slave clocks in the station are on exactly the right time; slave clocks were placed in various locations, from common rooms to workshops. A master clock could potentially run thousands of slave clocks at one plant. The clock also contains a rectifier. A rectifier is a device that is used to convert AC power to more stable DC current.Two clocks in a timber case. Both are electric, one is powered by the main pendulum mechanism, the other is a self contained electric clock. The main mechanism is of the gravity arm and roller type, which sends an impulse to the slave clocks every 30 seconds. The This Synchronome Frequency Checking Master Clock was used at the Ballarat Power Station. Below the main section of the case is a smaller cabinet containing a rectifier to provide consistent DC power for the clock. The rectifier was made by the Victorian company Hilco, which was located in Burwood. There is a high chance this is not the original rectifier from this clock as there appears to be brackets to hold a larger device in the space the rectifier occupies.Front below main clock face on front of case: "Patented Sychronome Brisbane" Lower left-hand clock face: "Frequency time" Lower right-hand clock face: "Standard Seconds" Synchronous electric clock mechanism on door (Frequency time clock): >200/250 V. 50~ >"Synchronomains" Made in England >Direction indicator for clock starting switch >"To start move lever in direction of arrow and release" >"Patent applied for" Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for "standard seconds" clock: >"English Made" >"Patented" >Serial number "321" >0 above right-hand pillar on front-plate Mechanism for main clock face: >"English Made" >"Patented" >Serial number "8751" >0 above right-hand pillar on front-plate Inside case, back panel, top enamel plate: >Seconds Battery + Pos. > Battery Common or - Neg. >1/2 min dials Inside case, back panel, bottom enamel plate: external seconds dial Inside case, right hand side, electrical knobs: two switches, both "A.C. mains" Pendulum rod, below suspension spring: Serial number (?) 0000005 Rectifier in bottom cabinet: >"Hilco Rectifier" >"A.C. Volts 230/240" >"Model 1060/S" >"A.C. Amperes" >"Serial No. 1060/S >"Phases 1" >"D.C. Volts 6" >"C.P.S. 50" >"D.C. Amperes 1" >"Made in Australia by Hilco Transformers McIntyre St., Burwood, Victoria." Bakelite electrical plug: makers mark Lower cabinet, RH side panel, pressed tin plate: "AC" (upside down) Brass speed adjustment, outer right RH side: "S" and "F" Ivory and wood pendulum beat ruler: >Ruler, with 0 in centre and numbers 1-5 in ascending order from centre on left and right. > "Synchronome Patent." Steel plate, back panel, inside case, right hand side: >N R A" (descending) >"2191" serial number/part number Face of main clock: "Synchronome Electric" synchronome frequency checking master clock, electricity, state electricity commission, wendouree parade power station, secv, clock, time, pendulum, electric supply company of victoria, norman f. dalton, ballarat power station, rectifier, slave clock

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 the Regiment was deployed to Merauke, Dutch New Guinea. Upon its return in April 1945, the Regiment was redesignated 20th Pioneer Battalion. It was disbanded following the end of the war. 20th Light Horse was the only light horse regiment to serve overseas in WWII.Framed colour photograph of guidon of 20th Light Horse Regiment20th, light horse, guidon

Used on Horse tackle during the 19th and 20th century by Holden and FrostUsed and sold by Holden and Frost Ca1900Brass half buckle used on horse tackleequine agricultural, military, civilian ca1900, buckle

Believed to have been worn by Alf Arnott (Alfred John Arnott) Light horse man of LilydaleAustralian Light Horse cavalry bandolier

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised initially as 20th Motor Regiment. In 1943 redesignated 20th Pioneer Battalion and deployed to Merauke, Dutch New Guinea. The regiment was disbanded at the end of the war, 1945. 20th Light horse was the only light horse unit to serve overseas in WWII. This is one of a collection of pewters presented by officers of a Light Horse regiment drawn from rural and regional Victoria in the period between the World Wars.Silver plated mug with handle and inscribed on side.20th Australian Light Horse Officer's Mess. Presented by Captain E.R. Dibbs20th, mess, officer, dibbs, light horse

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 redesignated 20th Pioneer Battalion and deployed to Merauke, Dutch New Guinea. The regiment was disbanded at the end of the war, 1945. 20th Light horse was the only light horse unit to serve overseas in WWII. This is one of a collection of mugs presented by officers of a Light Horse regiment drawn from rural and regional Victoria in the period between the World Wars.Silver plated mug with handle and inscribed on side.20th Australian Light Horse Officers' Mess. Presented by Lieutenant J.S. Christiechristie, mess, 20th, light horse

A large camp of ligh horse regiments took place near Torquay, Victoria in the early months of World War Two. This was the swan song for horsed light horse, shortly after the Victorian regiments converted to mechanised units.Framed black and white photograph of Light Horse near Torquay Victoria in 1940.light horse, torquay, world war two, wwii

Following Federation a number of companies of Victorian Mounted Rifles were consolidated to form the 8th Light Horse (VMR). In 1912 the regiment was re-titled 16th Light Horse (Indi Light Horse). In 1920 another re-numbering took place with the regiment becoming 8th Light Horse (Indi Light Horse).Badly faded photograph of group of soldiers of 8th Light Horse (VMR) in Violet Town 1906.Violet Town 1906. Sgt W Luscombe left kneelingmilitary, vmr, light horse, violet town, luscombe

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 the Regiment was deployed to Merauke, Dutch New Guinea. Upon its return in April 1945, the Regiment was redesignated 20th Pioneer Battalion. It was disbanded following the end of the war. 20th Light Horse was the only light horse regiment to serve overseas in WWII.This is one of a collection of photographs featuring a Light Horse regiment drawn from rural and regional Victoria in the period immediately prior to mobilisation for World War 2 (1939-1945).Black and white photograph of soldier in Light Horse uniform: slouch hat with plumes: tunic with collar badges" belt and bandolier" jodhpurs boots and leggings. Part of 20th Light Horse collection.20th light horse, uniform

Horseworks for one or two horses, gearing, shafting and pulley, complete. Used as a power conversion unit via one or two horses to operate a chaff cutter or similar unit. Horseworks is set up outside a building with an underground shaft to a pulley inside the barnRobinsonfarm, machinery, horseworks, power, horse, churchill island

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost c1900 for military and agricultural use.Nickel plated horse bit bradoon nickelequine, military, agricultural, civilian ca1910, horse bit

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Manufactured and sold by Holden and Frost for military and civilian use c1910Nickel plated racing bradoon horse bitequine, military, agriculture, civilian ca 1910, horse bit

FROM 1914 TO 1918 MEMBER OF THE 9TH LIGHT HORSE. THE HAT IS THE SLOUCH TYPE, NOT PLUMED, THE SHOULDER BANDOLIER AND CANE ARE FEATURED.BLACK & WHITE ORIGINAL, OF PTE. E. MATHERSON WEARING 1ST. WORLD WAR UNIFORMMATHERSON PTE. E. MATHERSON 9 LIGHT HORSE.local history, photography, photographs, military

ROBINSONS WHIM HORSE PUDDLING MACHINE F. CREEKPHOTOCOPY OF LITHOGRAPH OF HORSE PUDDLING MACHINE F. CREEKlocal history, photography, photographs, mining