Badge Day is held during Legacy Week, traditionally in September, when collectors sell badges on the streets to raise funds for Legacy. These photos show volunteers and legatees in Legacy House during the day. Many have collection tins. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of past Badge Days.Colour slide x 2 of Badge Day activity in Legacy House in 1959 in cream Anscochrome mounts.The mounts are imprinted with 'SEP59' by the manufacturer, plus individual slide numbers (3, 4, 5, 6, 8, 9, 10, 11, 12, 13) other numbers may be found later.badge day, fundraising

Badge Day is held during Legacy Week, traditionally in September, when collectors sell badges on the streets to raise funds for Legacy. These photos show volunteers and legatees in Legacy House during the day. Many have collection tins. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of past Badge Days.Colour slide x 4 of Badge Day activity in Legacy House in 1959 in cream Anscochrome mounts.The mounts are imprinted with 'SEP59' by the manufacturer, plus individual slide numbers (3, 4, 5, 6, 8, 9, 10, 11, 12, 13) other numbers may be found later.badge day, fundraising

The lapel badge was worn to signify membership of the Harbour Lights Guild. Variations of this badge were made for different State Guilds by different jewellers or badge manufacturers. Variations also indicated during some eras if the wearer was a full member, worker or honorary.The Harbour Lights Guild was instrumental in securing funds to construct the current building at 717 Flinders Street, and in particular the Memorial chapel and Gymnasium. They were also dedicated volunteers who organised many social functions and events to offer visiting seafarers an opportunity to relax, have fun and socialise away from the ship. The organisation operated from 1906 to the early 1960s in Melbourne and developed an organisational model that was adopted by many branches across Australia and for other global missions.Small round white enamel and gilt lapel badge denoting the Harbour Lights Guild and its association with Mission to Seamen (Mission to Seafarers). The badge incorporates the logo flag of Mission to Seamen.Gold lettering around the edge of the badge: "HARBOUR LIGHT GUILD MELBOURNE" Gold lettering inside central Mission flag: "THE MISSION/TO SEAMEN" Maker's mark on reverse: "K.G. Luke/Melb"volunteers, social, harbour-lights-guild, mission-to-seafarers, membership-tokens, functions, visits, badge, hlg

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of ECKS Ltd..Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic - Display showing embossing & shape especially if in good condition.Clear glass bottle with graphite stopper. Straight sides. Top third tapers sharply into a neck. One third from the top it is heavily embossed with the letters ECKS. It is heavily embossed, in capital letters, around the bottom of the sides and lightly embossed on the base and near the opening.Below the opening is embossed '28'. Side: 'ECKS'. Bottom of sides around circumference: 'The property of ECKS limited Melbourne and its use by others is illegal.' Base: 22bottle, lemonade, soft drink, ecks

Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed. Bottles were re cycled remaining the property of the manufacturer. History of W. J. & F. Barnes, Pty. Ltd. Melbourne.Historical: Change of bottles - shape, glass, embossing, use Aesthetic: Display showing embossing and shape Clear glass medium sized bottle. The base is as wide as the top before it tapers into the neck and lip and then the screw top. From the base it tapers in before a very gradual taper to the broad part which is three quarters of the way up. The base is round but the sides have 4 wider 'panels' opposite each other. In between these are 2 smaller panels. Heavy embossing on 1 wider panel and base printed in capital letters.Side: vertically: 'This bottle is the Property of / W. J. & F. Barnes Pty Ltd. Melbourne' Base: Common Seal "A" with 'G' inside the top half and 'M' inside the lower half. Underneath the 'A' and across the middle is 'F1570' and below this is 'M'sauce, glass bottle, w. j. & f. barnes pty ltd melbourne, household

The Warrnambool Cheese and Butter Factory Company Limited was established in 1888 at Allansford and remained as an independent dairy manufacturer until 2014 when it was taken over by Canadian company Saputo. The factory was burnt in 1929 and all records lost. This booklet is a reprint of the original.Warrnambool Cheese and Butter Company Ltd was the earliest dairy manufacturer registered in Victoria. Registered in May 1888, it commenced processing in November 1888. The Articles record the early rules of the company and some of those early people involved in the company.Brown soft cover 12 page booklet 'Memorandum & Articles of Association of Warrnambool Cheese & Butter Factory Company Ltd', with black border around the black text.The Companies Act 1864/ Memorandum/ and/ Articles of Association/ of/ The Warrnambool Cheese/ and/ Butter Factory Company Ltd/ Warrnambool: / The Modern Printing Company, Koroit St/ 1932allansford, warrnambool cheese and butter factory company, companies, commerce, articles of association, companies act 1864, dairy industry

Photograph of a Hutchinson, Hollingworth and Co. Limited Loom gears and mechanisms. Hutchinson, Hollingworth and Co. was an Oldham-based loom manufacturer estalished in 1860 by Messrs. John Hutchinson (c.1816-1888) of Cawthorne and James Hollingworth(c.1834-1895) of Holmfirth.Three black and white photographs in portrait format of a looms gear mechanisms.8052.1 - front on machine mid left quadrant - Hutchinson, Hollingworth and Co 8052.2 - front on machine mid left quadrant - Hutchinson, Hollingworth and Cotextile machinery, wool manufacture, wool, loom

Charles John Glover (1881-1965) began his career driving a cordial cart for Mr Phillips. By 1906 he was operating in a partnership with Charles Runting as soft drink manufacturers in Chapel Street. This partnership was dissolved in 1907 and Glover continued alone.Glass bottle. Brown with black edges label: compound cordial at the top, and in pencil 15-20 yo old. underneath in an oval the trademark symbol of two bulls a coat of arms, a crown and a flag. The main part of the label has a flower symbol and the words ''flavored peppermint approx 26 ozs.'' diagonally across. Manufactured by Chas Glover Bendigo, phone 343. The bottle is full, cork in position with wax cover.bendigo, business, chas glover

Shirt - green colour cotton fabric with long sleeves, shoulder epaulettes, two front pockets with button down flaps, plastic buttons. Cotton Manufacturers label - green colour with off white cotton label stitched over first label, below collar, both with black print information. Army workdress shirt commonly called "Greens".Green cotton label information - black ink print. "VICTORIA/1980/^ /SIZE 37/81/ 8405, 66, 093,2429/SERVICE NO./ NAME" Off white cotton label information - black ink print with handwritten details: "THIS TAG IS FOR IDENTIFICATION ONLY/ PLEASE REMOVE BEFORE WEARING/ Product No. 80021/5/Order No. 29100320/Size 37-81/Garment No. 20680D/Remarks".uniform, army, workwear

Shirt - green colour cotton fabric with long sleeves, shoulder epaulettes, two front pockets with button down flap, two sleeve pockets with button down flap, plastic buttons, cotton manufacturers label, below collar with black print information. Army workdress shirt commonly called "Greens". This shirt has more of an American style.Cotton label information - black ink print. 'C.J. MARTIN PTY LTD/ SOUTH AUSTRALIA 1972/ ^/ DSN 8405 66 034 5991/ chest 7 size 41/43l/ Army no./ name/"uniform, army, work wear

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Khaki woollen battle dress jacket with cloth major's insignia with a queen's crown sewn on each epaulette. On top of each sleeve is a cloth badge with 'ROYAL AUSTRALIAN ARMY CHAPLAINS DEPARTMENT' embroidered in white letters on a purple background. A white calico manufacturer's label with laundering instructions, is sewn on the inside. A gold coloured metal cross is pinned to each lapel.uniform, insignia, army chaplain, major thomas b. williams

This particular box of brass drawing pins would have been used before the introduction of cheaper polished chrome drawing pins manufactured in Asia. The box construction and label would suggest that supply of this boxes contents could have been in the early 1950's. Drawing pins or push pins were first invented in 1900 by Mr Edwin Moore. The need for a secure fastener to accommodate temporary signs and notes for domestic and commercial environments sprang up from the need to cope with an increasing faster method of presenting information on removable surfaces such as temporary notice boards. In the 1950's and later the increase in the pace of "living" brought about many time saving written communication notices. This temporary method of providing fast temporary notices is being surpassed by the computer age and mobile telephone "applications". The information spectrum of the computer age has made many "hands on" (drawing pin) applications go to the "dodo" level. This box of drawing pins is very significant to the Kiewa Valley and its region because it demonstrates that the pace in rural regions especially those that were once semi remote regions has moved at the same pace as the bigger towns and cities. Differences are still noticeable, such as the requirement of drawing pins for temporary signs and mail box commercially important "sales" notifications. The pressures that produce the "rat" syndrome, that is pressure by increased population levels infringing upon the individual's day-to-day existence is still not present in rural areas such as the Kiewa Valley. Drawing pins are still a requirement for leased accommodation (which are usually short term accommodation) for the personalisation of "home" wall decorations and shopper's "notice and information boards"This small box, similar to a "match box" (thumb activated slide, top open, cardboard container), holds brass drawing pins. These brass pins are also known as brass tacks, thumbtacks or push pins. The top of the brass tack has a "domed head" with the manufacturer's logo stamped on it. The number "2" on the bottom right of the label is the "weight" of the drawing pin. On the front and within a red border and red letters "BRASS" and below this in script form "Drawing Pins" and below this in smaller letters "Made In Germany" Below this and on the bottom left side "100" and also on the bottom but to the right "No. 2"notice and information boards, quick temporary fasteners., pins, tacts, brass tacts, domestic, decorations

Bottle clear glass with screw lid "Melanyl" Inventors and Manufacturers Cooper, Dennison and Walkden Ltd. English dye in. Also 2 nibs and wood pen body. Bottle etc all container in cardboard box with sliding sleeve. Small pen with nib corroded, plus spare nib - inscribed "Hinks.Wells & Co "Flexor Pen" England 1884F.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Red coloured covered case with three panels with covers, silver lettering on front cover. Folded sample case with Card A, Card B, and Card C with samples of needles attached with sizes and recommended sewing machines and specialized usage for each needle. Needles manufactured by Woodfield and Sons Patentees and Manufacturers of sewing machine needles. Old Box 85.''W.Woodfield & Sons, Manufactures Redditch, England'' Easemore Works.domestic equipment

Cohns or Cohn Bros. Limited Annual Report 1970. Registered Office : Bridge Street, Bendigo. Soft drink manufacturers. Printed booklet twelve pages in length. Directors : Leo R. Cohn (Chairman), Jack M. Cohn (Managing Director), Francis H. Cohn, Albert McB. Fairfoul, Richard N. Levy. Secretary : Valentine F. Moyle.bendigo, industry, cohn bros., cohns. cohn bros. limited. soft drink manufacturing.

Cohns or Cohn Bros. Limited Annual Report 1965. Registered Office : Bridge Street, Bendigo. Soft drink manufacturers. Printed booklet eight pages in length. Directors : Leo R. Cohn (Chairman and Managing Director), Clifford Cohn, Albert McB. Fairfoul, Richard N. Levy, John M. Cohn. Secretary : Valentine F. Moylebendigo, industry, cohn bros., cohns. cohn bros. limited.

Demi John cream in colour with a tan upper section. Previous catalogue number 84. The upper section contains the manufacturer's stamp ''Bendigo Pottery, Epsom''. Also stamped into the pot are the words '' 1/- D. WHYTE & CO. WINE & SPIRIT MERCHANTS, PALL MALL BENDIGO'' The base is approximately 15 cm in diamter and approximately 25 cm in height.''Bendigo Pottery, Epsom'' ''1/- D> WHYTE & CO. WINE & SPIRIT MERCHANTS, PALL MALL< BENDIGO''food technology, bottling, demi john

Pittock collection: timber carpenter's level * level made of hardwood, with brass trims and two glass level bubbles * level 505 mm L x 80 mm W x 32 mm D * P incised on both sides of the level * no manufacturer's details visible Item stored in Pittock coach builder's box, reference 13000.1.

The Pro Race cervical cap was used in the early 1960s. This pessary came from Professor Geoff Bishop's rooms, Mollison House, 386 Albert Street, East Melbourne. The pamphlet associated with this item says that this device was mentioned by Marie Stopes in her book, 'Contraception'.Cervical cap made of black latex rubber with rolled rim. With original manufacturer's box. Box is pink cardboard and printed with the text '"Pro-Race"/ REGISTERED TRADE MARK/ PURE LATEX/A.SAUNDERS & CO PTY. LTD./ MELBOURNE". Object also includes a paper instruction sheet detailing product information and method of use - the instructions include diagrams.contraception, pessary, marie stopes, intrauterine device

Developed by Dr Jack Lippes in 1962, the Lippes Loop was commonly used as a contraceptive device from the 1960s to the 1980s. Due to its low cost and the ease of inserting and removing the device, it quickly became the most popular IUD in the world during its time. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two sealed Lippes Loop IUDs, Size C. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds each IUD inside the pocket. The packaging of the first Lippes Loop is printed with an expiry date of Jan 83 on the back. The packaging of the second Lippes Loop is printed with instructions for use on the back.l intrauterine device

A Barker & Son 'The Invincible' tennis racquet with concave wedged throat and bevelled, oval head. Has cloth tape reinforcements around shoulders, and an octagonal handle with 'fishtail' shaped end. Model name imprinted across throat on obverse. Manufacturer's name printed across throat on reverse. Materials: Wood, Lacquer, Metal, Glue, Gut, Cloth tape, Inktennis

A ' Windsor' tennis racquet with bevelled oval head, concave wedge throat and red string whipping around shoulders. Fishtail shaped butt, handle has fine grooves and two large furrows. Model and manufacturer names imprinted and inked across throat on obverse. Strung with twine. Materials: Wood, Lacquer, Metal, Glue, Twine, Ink, String, Guttennis

A wooden racquet. Inscription across the throat of obverse: MERCURY. Inscription across the throat of reverse: HARRY C. LEE & CO./NEW YORK. Manufacturer details also along side of racquet stem. Company logo 'LEE' imprinted on red cloth butt cap. Materials: Wood, Glue, Lacquer, Ink, String, Gut, Leather, Metal, Clothtennis

A wooden racquet with a convex throat, and, carved octagonal handle. Throat on obverse features decal inscription: REX. Throat on reverse features a decal of a crowned garter with the inscription: E. KENT. Inscription of manufacturer's details along left side of stem: MADE BY E. KENT/PAWTUCKET, R.I., U.S.A. Materials: Wood, Glue, Lacquer, Metal, Gut, Ink, Leathertennis

An Horace Partridge Co., Wimbledon model tennis racquet, with string whipping and hide reinforcements around shoulders, and deep-grooved octagonal handle. Decal of model name features across throat on obverse; decal of manufacturer, with partridge and rising sun trademark, across throat on reverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Leather, Gut, String, Clothtennis

A John Piggott 'The J.P. Champion' tennis racquet, with solid, convex throat, cloth tape shoulder supports, and fine-grooved handle with fan-tailed butt. Model name in decal features along throat on obverse. Impressed manufacturer's details feature across throat on reverse. Materials: Wood, Lacquer, Glue, Metal, Gut, Cloth tape, Inktennis

Handmade three dimensional wool frame. Features a Chinese house in a winter night scene. Decorative raised parts include the frame edge, house, roof, fence, moon and stars. Each piece is bound in wool thread to create the woven effect. Colours of blue, white, brown and red. Sealed in a plastic bag. Manufacturer's label printed in Chinese on reverse.

Handpainted white china plate featuring a figue of a Japanaese woman carrying a child on her back. Painted in colours of black, pink, blue and white. The design features Japanese writing down the right side of the plate and a gold painted rim. Green and gold circular manufacturers sticker on lower edge of front. Includes black plastic-coated metal stand.

A wooden racquet with a concave, solid throat, and plain octagonal handle. Inscription across the throat on obverse: FAIRFIELD. Manufacturer's mark, featured on throat on reverse, comprises of the letter 'M' at the centre of a circular, banded shield. Inscription: N.J. MAGNAN CORP./NORTH ATTLEBORO,MASS,U.S.A. Materials: Wood, Nylon, String, Leather, Cloth, Metal, Glue, Lacquer, Inktennis

A 'Birmal' model tennis racquet manufactured by Birmingham Aluminium Casting (1903) Co. Ltd. Has open throat and handle wrapped with string whipping. Metal butt cap. Metal strings. Manufacturer name embossed on one edge of shaft. Model name and words: 'ALL METAL' embossed on other edge of shaft. Materials: Metal, String, Woodtennis