Watsons Creek Showing steel work 26/1/1956Record of various Shire of Eltham infrastructure works undertaken during the period of 1952-1962 involving bridge and road reconstruction projects, sometimes with Eltham Shire Council Project Reference numbers quoted. It was during this period that a number of significant improvements were made to roads and new bridges constructed within the shire that remain in place as of present day (2022). In many situations, the photos provide a tangible visible record of infrastructure that existed throughout the early days of the Shire. The album was put together by or under the direction of the Shire Engineer, J.A. McDonald.infrastructure, road construction, shire of eltham, bridge construction, eltham-yarra glen road, w.e. wolf, watsons creek, 1956-01-26

General purpose household bowl, green enamel over steel.Large green enamel bowlbowls, enamel bowls

These signs were used on vehicles. Note that .2) has a key hole in it..1) Steel TAC sign: Side A - Blue, yellow & red bands. No. 10 painted overall. Side B - Drab olive colour, black No 10 painted overall. .2) Steel TAC sign: Side A - Plain blue, with No. 6 over 296 painted in white. Side B - No. 6 296 painted in white. .3) Steel TAC sign: Side A - Drab olive with No. 1 over MSU, painted in black. Side B - Not painted..1) On olive side: “H U Coy 1 Boe Test. ASM S/Sgt L R Magnussen” .2) Side A: “DSU Broadmeadows L/CP Nisbet”military history-army, vehicles

Cross country boots are no longer attached to the ski by three holes hooked onto 3 'nails'. Very dark brown solid leather boots with 3 steel loops each side on the lower and 2 steel hooks on the upper section of the opening. The tongue is high and padded. The laces are thick and yellow. The sole is a thick rubber with 3 toe holes (to attach to skis) at the front end.Outer side: embossed 'V'. Inside tongue: 'Vasque / Boots'. Bottom of sole: 'Vibram / 'Made in Italy'cross country boots, skiing boots, falls creek, snow, cross country skiing

The rigger's knife is usually more square pointed and thicker than that of a sailmaker. ( C.W. Ashley 1944 Ashley book of Knots p. 19) The rigger usually had a kit of tools that would fit on a belt: a sheath knife, a marlingspike, and a grease horn containing tallow.Property of the anonymous donor a former seafarer who also presented us with two hand-crafted examples of knot tying.Knife; a wooden handle in two pieces either side of blade secured by two steel anchor points. The short steel blade is oxidised but the actual cutting edge is worn and honed. The yellow nylon sheath appears to be made from recycled material strongly stitched on two sides. Large font black lettering on the inside but indistinguishable.rigging, rigger, sailor, seamen

Used in the 19th or early 20th centuryA long handled steel vintage post hole digger with two large curved split blades. Each blade is attached to the top of the handle by three screws. It has a rotating action with the digger boring into the earth as the handle is turned. There is an attachment at the end of the steel handle for a missing turning handle.'S' is stamped on the top of the handle.tools, agricultural tools, farming equipment, garden tools

Curved Acrylic (probably) or tortortoise shell handled cutthroat/straight razor with steel blade. Two handle pieces known as 'scales'. Blade hinged through handle with rivet at one end. Thumb notch as part of blade continues past hinge. Two more rivets attach two pieces of handle together; 1st rivet with spacer 4cm from hinge rivet, 2nd rivet at opposite end to hinge. Handle:Gold decorative writing-Flic R with 'REGD' enclosed below on one side approx 9 cm from hinge. 2nd side no inscriptions. Blade: Side 1- FLIC enclosed in rectangular parrallelagram next to hinge. Etched 'gold' decoration and inscription along back edge. Inscription reads 'FLIC GOLD'. Blade: Side 2- Near Hinge- MADE IN GERMANY FROM BEST FLIC SILVER STEEL. Blade: Back edge- Serrations for 5cm from hinge.

This veterinary equipment was found in an old walk-through dairy at Wombat Track. The instruments have been identified by Vet, Peter Honey,(9.1.2019) as instruments used to gain access to a teat cavity in a cow and to remove a blockage in the teat. They are possibly an improvised tool used c 1900-1950's.These items are representative of items used in Orbost on dairy farms in the first half of 20th century.A small set of instruments and container made of metal -possibly stainless steel. The instruments are a small spoon and two probes.On outside of container : D.C.L. SCOTCH WHISKYbistoury veterinary-equipment dairy farming

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.Long steel scissors. Blades are bowed when closed with serrated ends for gripping. Used with packing gauze into a cavity.medical equipment. hospital equipment. scissors, forceps. mt beauty. tawonga.

Green British pattern steel helmet with "button top" This helmet shows multiple shrapnel dents and one penetration.

Irene May Warren enlisted in the Army on 19.4.1943 No 508825. Discharged on 21.11.1945 with the rank of Cpl in the 8th Australian Cipher Section.Engraved, steel, octagonal shaped ID disc with green nylon string. Australian, for Victorian female army member.Inscribed front: “VF, 508825, IM Warren, CE” On rear: “A2”accessory, identity, disc’s

The word “catheter” comes from Greek, meaning “to let or send down.” Catheters were used as early as 3,000 B.C. to relieve painful urinary retention. In those times, many materials were used to form a hollow catheter shape, including straw, rolled up palm leaves, hollow tops of onions, as well as, gold, silver, copper, brass, and lead. Malleable catheters were developed in the 11th century. In time, silver was used as the basis of catheters as it could be bent to any desired shape and was felt to have an antiseptic function. Benjamin Franklin, the inventor and colonial statesman, fashioned silver catheters for use by his older brother John. John suffered from kidney stones and needed to undergo a daily ritual of placing a bulky metal catheter into his bladder. To make these daily requirements on his brother less painful, Franklin worked with his local silversmith on his design for a flexible catheter. "It is as flexible as would be expected in a thing of the kind, and I imagine will readily comply with the turns of the passage," he wrote to John. Holes were bored into the sides of the catheter to allow for drainage. Coudé tip catheters were developed in the 18th and 19th centuries to facilitate male catheterization and continue to be used for this purpose in current medical practice. Catheters made from rubber were developed in the 18th century but were weak at body temperature, leaving debris in the bladder. The advent of rubber vulcanization, by Goodyear in 1844, improved the firmness and durability of the catheter, and allowed for mass production. Latex rubber became available in the 1930s. Dr. Frederic E.B. Foley (a St. Paul urologist) introduced the latex balloon catheter at a urologic meeting in 1935. Though he lost a legal battle with Davol for the patent, this catheter has since been known as the “Foley.” The earliest self-retaining catheters had wing tips (called Malecot) or flexible shoulders (called Pezzer), and were tied to the male penis or sutured to the female labia. Charriere’s French scale was used to describe the external diameter of a catheter. Thus the term “French (Fr)” size was coined. Joseph-Frederic-Benoit Charriere was a 19th century Parisian maker of surgical instruments. A 12 French catheter is approximately 4 mm in external diameter (0.33 mm = 1 French [Fr]). In French-speaking countries, these catheters may be referred to as the Charriere or abbreviated Ch. Catheterization of the bladder was felt to be fairly safe because of the antiseptic principles of Lister (1867). But many physicians continued to be concerned about catheter-related infections as patients were still developing “catheter fever” (systemic infection) despite antiseptic principles. After World War II, Sir Ludwig Guttman introduced the concept of sterile intermittent catheterization in patients with spinal cord injury. For many years, sterile technique was used for catheterization. In 1971, Dr. Jack Lapides of the University of Michigan at Ann Arbor introduced the clean intermittent catheterization (CIC) technique. Dr. Lapides’ theory was that bacteria weren’t the only cause of infection. He believed that chronic stagnant urine residuals and overstretching of the bladder were also responsible. But the fact that CIC was not performed in totally sterile conditions, Dr. Lapides still felt it was superior to indwelling catheters. Initially, Lapides was scorned in the urology world. Three decades after this debate, clean intermittent catheterization remains the preferred method to treat chronic urine retention and neurogenic bladder. Recent regulatory changes have recommended against the reuse of catheters for CIC in an attempt to further reduce the risk of catheter-associated urinary tract infections. https://www.urotoday.com/urinary-catheters-home/history-of-urinary-catheters.html This catheter was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928. Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community. They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine, administration, household equipment and clothing from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Stainless steel catheter with hollow tip from W.R. Angus Collection. Top and end of this instrument screw together. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, department of defence australia, australian army, army uniform, medical treatment, medical history, medical education, catheter

Quarter deck bell mounted on timber plinth from 3 masted steel hulled barquentine "Alexa"iCapt G M Heyen 1925

Small retractable steel blade with pointed tip protected by pair of tortoiseshell covers; blade marked with maker's name.MCNvolum collection, lancet, blade, knife, vaccination, cutting, bleeding, bloodletting, thumb lancet

This dental instrument was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.Clear plastic sealed bag holding about 27 steel probes of different sizes. Used for Dental work.On the bag in red handwriting 'Electric'dental probes, medical, hospital, tawonga district hospital

A box used to store and carry cartridges safely. It is protcted from moisture entering. Labelled with caliber, quantity and manufacturing date or lot number. The Martini-Henry is a single shot ricle with a lever action used in WWI.Sturdy rectangular wooden box with steel straps. At the top is a sliding opening with yellowish wood and printed black label."680 / Cartridges / Ball / b. L. Martini-Henry Arm / Mark V / R. L. " is printed in black on uellowish wood at the top centre of the box. More printing on the top each side "C & H' and "C?? / 19,2,75?"ammunition box, cartridge box, dederang rifle club

A reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides. Very oldUsed by metal workers in the Kiewa ValleyThis reamer is made of steel and is not tapered. It has a handle end and a serrated end. It has a three quarter inch diameter. reamer, metalworking tool

Possibly used for cleaning out animal pens.eg. horses and pigs. Used like a hoe but heavier and stronger.Used by residents of the Kiewa ValleyThick steel tool head with hole at one end for the handle and two parallel points. Possibly hand made.pick, double tyne prong pick, farming equipment, hand tool

ukv 257 Used to remind the user of the day and date. Pre dating computers and mobile phones.Used by residents of the Kiewa Valley especially in the office.Black tin ramp with two holes and an oval hole cut at the front to fit a steel frame for paper sheets.Embossed on the front 'Bunch of Dates'office equipment, calendar stand

A harness distributes pressure over a large area of the horseHorses were used by farmers in the Kiewa Valley prior to motorised vehicles.Unidentified horse straps - leather with steel buckles. Possibly part of a harness that connects a horse to a horse drawn vehicle.horse harness, horse equipment

Possibly part of the Uebergang collection. The moulds are placed under pressure during the maturation process with excess moisture being forced out through the holes in the lid. This is one of a set of moulds with a size range 5lb, 10lb, 15lb, 20lb, 40lb, 80lb.Round galvanised steel cheese hoop with strap handles soldered to the sides. The round lid has 6 holes.

For an explanation about the history of steam engine indicators, visit: http://www.archivingindustry.com/Indicator/contentback.htm [last viewed 20 May 2013]. For information about the Richards' Improved Patent Steam-Engine Indicator see John Walter's publication 'The Engine Indicator: a short history of the autographic patterns from 1800 to the present day' - available online via: http://www.archivingindustry.com/Indicator/chaptertwo.pdf Information on Casartelli, Manchester is also available online via: http://www.archivingindustry.com/Indicator/chapterfour.pdf Refer pp.21-22 [last viewed 20 May 2013]Brass steam-engine indicator 125mm tall - accompanied by four steel piston springs - and a wooden measuring ruleIndicator [a] Casartelli Manchester [b] 41 ; Ruler [a] 12 to the Inch [b] No.2 [c] Casartelli & Son Manchesterrichards improved patent steam engine indicator, casartelli manchester

Footprint Tools is a hand tool manufacturer based in Sheffield, England. In 2014 most of their hand tools are still made in Sheffield at the Footprint factory. Footprint Tools can trace its manufacturing history as far back as the 1760s when Alfrid Ridge & Sons was established as a manufacturer of wood working tools. Ridge was bought by the current owning family in 1932. The Footprint brand originates from 1875 when Thomas R Ellin, a member of a cutlery manufacturing family, started a tool manufacturing business under the brand “Footprint”. This subsequently became known as Thomas R Ellin (Footprint Works). This company was bought by the current owning family in 1948 and began to manufacture a range of tools under the Footprint, Domino, Climax, John Bull and Clinker brands. During World War 2 the divisions of the business were engaged in manufacturing hand tools for British and Commonwealth forces. After the war Footprint continued to grow, manufacture and expand its range hand tools for the professional tradesman. In 2004, Footprint cooperated with the University of Sheffield in a study of modern manufacturing techniques. In 2008 Footprint moved to a larger factory and invested in new forging equipment, but this process was interrupted by a global recession, and Footprint was unable to generate enough business to cover the cost of the upgrades. In early 2009 the company was forced to liquidate and lay off its staff in order to pay creditors. The Jewitt family retained the brand and intellectual property, and later that year revived the company under the name Footprint Sheffield, and began producing a smaller range of products at first. With the same family of owner managers, now run by the fourth generation, in 2015 Footprint continues to manufacture most products in Sheffield, England and exports worldwide.A tool that was made by a UK company in the 1950s that has a long history of tool manufacture and after many changes in company ownership is still producing tools today in Sheffield England.Screw driver wooden handle turned and steel blade. Made in Sheffield by Alfrid Ridge and Son. London patternNoneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, screw driver, alfrid ridge & son, footprint tools, tools

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron broad single groove heavy set iron maker W Gilpin solid cast steelflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

John Heath tool boxGouge with cast steel marked on blade. Handle is wood octagonal. Blade is a shallow sweep.114mmL x 20mmW flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Hand written notes on the poppet legs of the Garden Gully Line. Lists the mines and if the poppet legs are steel or wooden.mine, gold, carlisle, carlisle united mine, poppet legs of the garden gully line