Clothing. Infant's cream coloured silk cape with collar and two layers. Semi-circular 180 degrees lined yoke section with round neckline with casing and fold over collar (18 cm). Collar has 9 cm frilled embroidered lace trim with scalloped edges. The cape has two layers both lined with linen fabric. The under layer (110 cm) is edged with 9cm frilled embroidered lace and three horizontal pleats above the hemline. The top layer (52 cm) is edged with 9 cm frilled embroidered lace with a 14 cm panel of embroidered lace across the centre of the cape. The layers create the effect of a long cape with a collar and a shoulder cape. The cape is fastened at the throat with silk fabric ties (8 cm X 50 cm) with fabric frills at the hem.costume, children's, infants cream coloured silk cape

Clothing. Infant's pink linen nightdress. Square neckline trimmed with eyelet lace threaded with pink ribbon, and 1 cm lace frill. Square yoke front and back with horizontal pin tucks and 5 cm lace insert. Yoke at front and back has 5 cm lace frill around edges. Long sleeves, have a pleat at the shoulder, pin tucks and lace insert at elbow. Sleeves are gathered into casing at wrist with 4 cm lace frill at hem. Front of skirt has vertical pin tucks and three lace inserts below the yoke. Skirt has border of zig zag lace insert and horizontal pin tucks above two 13 cm flounces with zig zag lace inserts and lace edges. Centre back opening (35 cm) fastened with four metal press-studs.costume, children's, infant's pink nightdress

Silver silk, with a jacquard woven floral pattern. Long sleeves have pleated tops, forming a leg-o-mutton sleeve, which gathers in at the elbows, to a narrow fitted sleeve to the wrist. A 4cm wide band of cream satin embroidered and corded lace. Cream cording and lace trims the cuffs, the shoulder/arm hole seam, and two bands on each side of the V shaped cross-over bodice. Metal press-studs fasten the cross over bodice at the waistline. Cream satin with embroidered lace overlay forms a 5cm wide stand-up collar and a centre front panel at neckline. Twelve metal hooks and eyes fasteners fasten the grey cotton front lining of the bodice. The cotton lining of the bodice is part machine, and part hand stitched. Relocated to Clothing Box 176 10.2.2022costume, female, silver silk and lace trimmed bodice.

Clothing. Cream silk embroidered sleeveless top with a neckline at front and back, which is edged with a fine rouleau binding. The fine silk binding also edges rhe sleeveless armholes. The fabric is woven with a floral woven design. A 2 cm wide tie attaches to the side seams 13 cms below the armholes.The top is sleeveless, and the hemline which is rounded at the side seams, is finished with a self fabric binding. Silk shadow embroidery trims the front neckline, and extends to the midriff. Embroidery is in a floral design. The pyjama pants are full length, with a fine bound finish - probably at or slightly above the ankles. An 11 cm deep V shaped panel at the front waistline, and an elastic casing at the back waistline. A panel of shadow embroidery decorates the side hemline. A small dart, 6 cm long, from below the armhole on either side of front bodice.SILK and RAYON MADE IN CHINAcostume, female, ladies cream silk pyjamas

Alice Frances (Henty) Hindson's grey silk bodice is believed to be part of her 'going-away' outfit after her wedding to John Hindson on 15 April 1875. The bodice must have been a family favourite as it was used and amended over the years. Alice was the youngest daughter of Francis Henty and Mary Ann (Lawrence) Henty. Alice's father, Francis Henty, was the youngest son of Thomas Henty, who with his family, their retainers and property moved to the Australian colonies between 1829 and 1832. In 1834, Francis’ older brother, Edward, sailed from Launceston in Van Diemen’s Land to what was to become Portland in the western part of Port Phillip District [Victoria]. Francis, together with the first flock of Merino sheep [in Victoria], followed some months later. The first and second generations of the Henty family established vast pastoral properties in the Western part of the Port Phillip District. Francis Henty managed ‘Merino Downs’ near Casterton, while also living in his retirement at ‘Field Place' in Kew. The Henty Collection of nineteenth and twentieth century clothing, including outerwear and underwear, was collected, stored and exhibited over time by female family members descended from Francis and Mary Ann Henty. During the twentieth century, items from the collection were modelled in two fashion parades by various descendants [1937, 1959]. The items in the collection are historically and aesthetically significant, with provenance provided by oral and written tradition within or held by the family. A number of the items in the collection are very rare survivors, and provide researchers with the evidence needed to reconstruct the lives of notable women in the Port Phillip District [later Victoria] during the nineteenth and early twentieth century.The yoke is a bustier bodice, made of silk and silk organza with an insert of hand-tatted lace. The bodice is carefully boned and has a little padding in the bust line. It includes the name of the maker of the bodice as ‘Madame Jay, Brighton, 38 London Road’. The silk organza sleeves have hand shirring, trim, and frilled cuffs. The bodice is finished with a large, frilled bow at the back. Believed by the Henty family to be part of the ‘going away’ outfit worn by Alice Henty in 1875. Measurements (mm): BODICE: Girth - Neck 304.8, Chest 762, Waist 571.5, Cuff 127 Vertical - From neck to hem 381, Front waist to hem 152.4, Back neck to hem 419.1, Back waist to hem 228.6, Sleeve length 254. Horizontal - Neck to sleeve head 165.1, Cross back 457.2, Underarm to underarm 431.8.Mme Jay, Brighton Road, London [dressmaker]bodices, women's clothing, alice (henty) hindson, alice francés henty

Set of three drawings from a set of 8 showing proposals for undergrounding tramways in the central part of the city - c1970. Models and other drawings have featured in the MMTB Annual Reports of the time. .1 - Figure 6 - Circular tunnel 16ft internal dia with Australian Railways Ultimate Maximum Rolling Stock Outline, 1963. Shows profiles of a Harris Blue Train, Class M, and a class W4 tram. Two copies held. .2 - Figure 7 - as for figure 6 but with a MMTB rear entrance Leyland Double deck bus body shown. .3 - Figure 8 - Underground tram routes - proposed basic arrangement at street intersection, typical cross sections - two copies held, one copy has been trimmed width wise. See also Reg Item 3069 and 409 for other references.In the top right hand corner of each drawing is "Graeme Breydon, 204 Carlisle St, Balaclava 3183 Tel 94 2886"trams, tramways, mmtb, melbourne, swanston st, bourke st, underground tramways, w4 class

The donor was given this doll about 50 years ago by her grandfather (in the late 1960s). He used to be a handyman at a high rise building in St Kilda, Melbourne. He had been doing some work for one of the old ladies and she gave him the doll to give to his granddaughter, who collected dolls. The doll has spent a few years at the Nagambie museum until it closed down and returned to the donor The origins or age of the doll are unknown. Originally it was thought to be a Fashion Doll dating from around the 1880s but the painted face together with the bisque legs and gold painted shoes are similar to those found on Boudoir Dolls (also known as Bed Dolls, Sofa Dolls, Flapper Dolls and French Dolls) of the early 20th century. Fashion dolls were sent from fashion houses to advertise the latest styles, fabrics, trims, hairstyles and accessories. Dressmakers would show these dolls to their customers. Ladies would then place their order and the dressmakers would make the dress to their size. The dressmakers would learn the construction techniques from examining the dolls. Boudoir Dolls dolls usually had no maker's marks and were primarily used as bedroom decorations for ladies rather than as children's toys. This doll appears to date at about the early part of the 20th century, but the petticoats are much older - possibly from a child's christening gown. At the time that the donor received the doll, it had a coloured lace over-gown that was badly torn so her mother removed it to replace with more lace but this never eventuated. The pink silk dress also appears to have been remodelled into a 19th century style with gathered sleeves and a gathered skirt. This fashion or boudoir doll is significant for being a rare example of a doll made in the late 19th or early 20th centuries. The doll is wearing clothing representing the fashion for young girls in that era. The doll is also significant as an item possibly used by fashion houses and dressmakers to advertise the latest fashions in clothing, trims, accessories and hairstyles. A doll such as this may have been found in a Victorian dressmaker's premises for use as a pattern and technique template and for a display to customers. It may also have been used as a decorative item in a lady's bedroom.Female boudoir doll with silk face and body, and porcelain lower arms and legs. She has plaited blonde silk hair. Her painted face has brown eyes and her shoes are painted gold. The doll is dressed in a long pink puffed-sleeve dress with a gathered waist and a ruffle at the hem. A pink ribbon around her waist is tied at the back. There are small silver balls hand-stitched around the neckline. She has a white, hand-embroidered lace petticoat and bloomers.warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, doll, boudoir doll, female doll, dressmaker's doll, display doll, late 1800s doll, fashion doll, antique doll, 19th century doll, children's fashion, girl's fashion, late 1800s children's fashion, early 20th century doll, composite doll, french doll

Being smaller than other bench planes, the coffin-shaped smoothing plane is better able to work on smaller work pieces and around obstructions. Since the 1700s wooden smoothing planes have predominantly been 'coffin shaped' wider in the middle and slightly rounded making them more manoeuvrable. A vintage tool made by an unknown 18th or early 19th-century woodworking tool maker. This item would have been made for individuals or cabinet makers that worked in wood and needed a tool that could produce a flat smooth finish to timber. These tools were used before routers and spindle moulders came into use in the late 19th and early 20th centuries before this time producing either a decorative moulding or a smooth finish to furniture timber, door trims etc had to be accomplished using hand planing tools and in particular one of these types of planes. Traditionally wood planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding or had a flat blade used for achieving a flat and smooth finish to timber. The blade or iron was likewise formed to the intended moulding profile or for smoothing and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers' shop might have many, perhaps hundreds, of moulding and flat-bladed planes for a full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. These vintage planes are well sought after by collectors of antique tools due to their rarity. A significant tool from the 18th to early 19th century by an unknown maker that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves handmade show the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber furniture item. Smoothing Plane Coffin type. Stamped GM inside "W" indicating sizeflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Being smaller than other bench planes, the coffin shaped smoothing plane is better able to work on smaller work pieces and around obstructions. Since the 1700s wooden smoothing planes have predominantly been 'coffin shaped' wider in the middle and slightly rounded making them more manoeuvrable. A vintage tool made by an unknown 18th or early 19th century woodworking tool maker. This item would have been made for individuals or cabinet makers that worked in wood and needed a tool that could produce a flat smooth finish to timber. These tools were used before routers and spindle moulders came into use in the late 19th and early 20th centuries before this time to produce either a decorative moulding or a smooth finish to furniture timber, door trims etc had to be accomplished using hand planing tools and in particular one of these types of planes. Traditionally wood planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding or had a flat blade use for achieving a flat and smooth finish to timber. The blade, or iron was likewise formed to the intended moulding profile or for smoothing and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and flat bladed planes for a full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. These vintage planes are well sought after by collectors of antique tools due to their rarity. A significant tool from the 18th to early 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber furniture item. Wood smoothing plane known as a coffin plane due to it's shape, wood insert screwed on front of base. Stamped "MILLER". Inscribed "X" (probably the size)flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cabinet makers tools, woodworking tools, wood plane, smoothing plane, timber finishing, furniture manufacture

Starting in around 1850, women began wearing boots that resembled the ones already worn by men in high society. Women’s Victorian boots were slightly more feminine in nature, however, than those worn by their male counterparts. The boots first worn by women extended to the middle of the calf so that her ankle would stay properly covered underneath her many skirts. These boots often featured laces or a row of buttons to keep them secure to the foot and ankle. Although usually made from durable materials like rubber and leather, boots that were worn purely for fashion were sometimes made of more elegant materials like patent leather or dyed suede. Fashion boots from the Victorian era exude all of the opulence and decadence that are unique to that time period. Design elements like scalloped trims, intricate embroidery, and lace accents were also not uncommon when it came to elaborately designed Victorian boots. Unlike men’s boots, they also boasted a slight heel that was thinner and more feminine in design. How lavish a woman’s boots were greatly depended upon how much money her family had and her place within society. While footwear was standard during this time, shoes were still quite a luxury to the modern Victorian. Only very wealthy women owned multiple pairs of boots that featured eye-catching design elements. https://www.wardrobeshop.com/blogs/victorian-era/an-in-depth-look-at-victorian-footwear These boots appear to be of a practical nature, designed for comfort, warmth, and proof against the rain and mud, rather than high fashion.These ladies' boots are historically significant for their manufacture and use during the Victorian period.Pair of ankle length black ladies' boots with long tan coloured laces.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, boots, victorian, leather, footwear

The Golden Eagle is an original design by Geoff Richardson. Geoff commenced gliding in the early days of the sport circa 1933 in Melbourne, flying at Coode Island and Mt Frazer. In 1934, he began construction of a secondary type glider but scrapped it upon realizing that a better design was needed. He conducted further research and came up with a sailplane of similar size and general arrangement to the Grunau Baby but with a “Gull” wing using a Gottingen 535 wing section (the same as for the Grunau Baby). Geoff did all the technical calculations himself and even made up and tested a Casein glue for the construction. Geoff competed construction of his new sailplane (which he called the “Golden Eagle”) in 1937 and it was test flown at Laverton at the western edge of Melbourne in September 1937. On the same day, at Laverton, the Gliding Club of Victoria flew its new Grunau Baby 2 sailplane which it had imported as a finished machine from Edmund Schneider in Germany. The Golden Eagle was found to fly well, having a similar performance to the Grunau Baby. In the 1950s, the Golden Eagle was modified by rebuilding the front of the fuselage to enclose the cockpit with a Perspex canopy. A landing wheel was incorporated behind the skid. Spoilers were added to the wings and a trim tab to the elevators. The Golden Eagle has been flown with the VMFG (Victorian Motorless Flight Group) for most of its long life. When donated to the Australian Gliding Museum in 2016 by Alan Patching it was probably the oldest, continuously airworthy glider in the world. Having regard to the historical significance of the Golden Eagle, the Museum has decided to not to fly it anymore to avoid risk of loss or damage. The exhibit is of great significance for Australian gliding history – the Golden Eagle is a flyable 1930s aircraft in excellent condition that was designed and built by an Australian gliding pioneer. Single seat wood and fabric sailplane finished with white wings, tailplane and rudder and yellow fuselage Registration letters “FC” on fuselage nose port side, Australian flag, Vintage Gliders Australia and VMFG decals on rudder, “Golden Eagle” lettering in red on each side of the fuselage below the canopy, Aboriginal flag decal on port side of fuselage below the canopy. australian gliding, glider, sailplane, golden eagle, richardson, patching, vmfg, victorian motorless flight group

Higginson's menswear store was located in High Street Wodonga. Mr. Higginson first worked as a grocery boy at Farmer and Sons in Wodonga. He later moved to Rudines in Dean Street, Albury. He worked at this store, which sold clothing for both men and women for several years until he joined the army in 1942. After the war, he went back to school for a while, but then returned to Rudines. This was followed by 2 years at Stiff and Gannon's in Wodonga. He set about saving to have his own business, spending 5 years as manager at Trim's in Albury. Lionel Higginson met his future wife, Dulcie, at a social dance a few years after returning from the war at a social dance. They both worked in menswear and were engaged 6 months later and started building their dream. This included building their own business. The business, L. A. Higginson's Menswear opened on 10 October 1958 and around 12 months later added a women's clothing line, Dee Gals. This became so popular that in 1995 Dee Gals moved in to its own shop in the arcade. When Lionel passed away in 1999, his eldest daughter Pauline, who supported the business from the time she was 15, helped her mother progress the business. At this stage managing 2 stores was very demanding so Dee Gals was closed. In 2000, Dulcie's daughter Michelle Williams and husband Phil took over the business. Due to changing shopping approaches and demands of online shopping, the business closed on June 2023 after 65 years serving the community.A coloured image of Higginson's Menswear in Wodonga.Above Shop : L. A. Higginson's Menswear / Dee Gals Lingerie Hosietyhigginson's wodonga, wodonga businesses, l. a. higginson wodonga

Black silk-satin machine stitched dress. Dropped waist with bans 3.5 cm wide across front. Pleat from neckline to dropped waist, 2.5 cm wide and fastened down by four groupings of two one cm diameter buttons, mauve in colour. Four rows of narrow pin tucks each side of centre front and one tuck one cm wide on outer side of pintucks. Six press stud fasteners concealed under left hand tuck. Fold down collar, with two silk embroidered flowers appliquéd at collar fronts. Three quarter length sleeves slit at lower edge, and trimmed with two mauve buttons and two silk flowers appliquéd at each lower edge. Four knife pleats at each side of front skirt/ Back straight through from shoulders.garments from the Executors of the late Frieda Kahland 11400.122,11400.364, 11400.365, 11400.366.. Donated by A.L.Lienhop of Harcourt.costume, female, black silk-satin dress

Waverley Novels Pocket Edition. Volumes 13 -24. Set of Novels awarded to William Fraser as the Waverley Prize 1878 at the Sandhurst Corporate High School Volume 1 has a Dark green book plate inserted inside the front cover. Book plate edged in gold and details printed in gold. First page has an imprint of the Bookseller - R Souter Sandhurst. The books are covered with a red, blue and orange marbled pattern. This patterned paper is also inside the front and front covers. The spine and corners are trimmed with dark green leather. Published by Adam and Charles Black 1873. The Waverley Novels were a series of more than two dozen historical novels published by Sir Walter Scott between 1814 and 1832. The Waverley Novels are a long series of novels by Sir Walter Scott (1771–1832). For nearly a century, they were among the most popular and widely read novels in Europe.Sir Walter Scottbooks, fiction, waverley novels

Waverley Novels Pocket Edition. Volumes 1 -12. Set of Novels awarded to William Fraser as the Waverley Prize 1878 at the Sandhurst Corporate High School Volume 1 has a Dark green book plate inserted inside the front cover. Book plate edged in gold and details printed in gold. First page has an imprint of the Bookseller - R Souter Sandhurst. The books are covered with a red, blue and orange marbled pattern. This patterned paper is also inside the front and front covers. The spine and corners are trimmed with dark green leather. Published by Adam and Charles Black 1873. The Waverley Novels were a series of more than two dozen historical novels published by Sir Walter Scott between 1814 and 1832. The Waverley Novels are a long series of novels by Sir Walter Scott (1771–1832). For nearly a century, they were among the most popular and widely read novels in Europe.Sir Walter Scottbooks, fiction, waverley novels

Clothing. Navy blue textured fabric possibly crimplene. Long tapered sleeves fastened with three covered buttons and loops at the wrist. High back neckline shaped to a V shape at the front. Centre front opening fastens with sixteen covered buttons and loops. Front yoke has a rouleau trim of fleur-de-lyse, and circular coils from 1 cm to 1.5 cm diameter. Side front panels are shirred at the yoke seam, and gathered at the shaped waistline panel. Waistline has a diamond shaped panel- 2.5 cm wide at the side seams, and eleven cms wide at the centre. Where the buttons extend over the midriff panel, the panel is shaped in a 7 cm V shape. Midriff panel extends into a belt at the side seams, fastening at the centre with a press-stud, and decorated with a flower of seven rouleau coils-1 cm in diameter. Hand stitched hem.costume, female, long sleeved navy dress

Very fine embroidered silk, three tier skirt - silk embroidery in a swirl design, and featuring small tufts of pink silk. Front placket, and narrow 1.25cm tape waistband. Metal hook and eye fasteners, and two metak hooks at back waistband to fasten bodice. Back sweeps into a small train. Two rows of joined lace form three panels from waist to lower tier. This lace also forms two L shaped decorative panels on upper section of skirt. Lower edge of silk lining has a band of stiffening, which then has an 18cm wide band of pink silk lining the hemline. This pink fabric matches the pink tufts on the fine silk outer layer, and possibly protects the finer fabric at the hemline level. Embroidered silk lace, in two bands sewn together, trims the hemline. PART OF WEDDING OUTFIT 11400.780; 782costume, female, cream silk full length wedding skirt

Clothing. Navy blue, wool, fully lined blazer, presumably worn by a drum section member as the right sleeve has a cloth badge, embroidered with a drum. Long sleeves are elaborately decorated with red felt and gold braid, and finished with three gold plastic buttons bearing the impression of a laurel wreath, and horn as a replica of the British Light Infantry. Two splits on back - one on each side of centre back. Red felt with four peaked stripes of gold braid, on the lower right sleeve - possibly indicates rank of the drummer. Red felt epaulettes trimmed with gold braid and buttons (as above). Two false pocket flaps - one either side of front. Fully lined with a woven patterned taffeta. Sleeves lined with cream polyester (?) with a self stripe. A red felt tab on either side of front revere collar, bearing a metal Leidertafel badge on each tab. One inside pocket on right front. Double breasted.Back of buttons:Stokes & Sons,Melbourne. On internal pocket A.Hayman. Product by Europe Modes for Comfort. Style. Stamina. And an embroidered hand, holding a torch and flame.costume, male ceremonial, band blazer

Clothing. Royal blue woollen fabric, with revere pointed collar and lapels. Left lapel has one stitched button hole. Breast pocket - depth 17.5 cm, width 14 cms embroidered in light blue, royal blue and gold, a coat of arms with laurel wreath cricket stumps, ball and two cricket bats. Within a shield shape is embroidered BDCA-possibly Bendigo and District Cricket Association. Below the shield shape is an embroidered ''ribbon'' embroidered with PROVINCIAL PREMIERS VCCL 1952, 1.5 cm braid-royal blue and gold trims the sleeves above the cuff.One small internal pocket in left front.All internal seams are bound in black tape. Shoulders of the blazer are lined with black polished cotton type fabric. Sleeves are lined with cream cotton fabric, with fine stripes of blue and brown. Two stitched button holes and two black plastic buttons.Label inside back collar: David Lack Pty Ltd Melbourne & Sydney. Label stitched inside back shouderline: Blazer and Uniform Specialists David Lack Pty Ltd Melbourne , Sydney. NAME….No…costume, male, blazer - bendigo cricket club

This item is part of the Di Reidie collection. Diane Reidie was a much loved volunteer and President of Brighton Historical Society from 1999 until 2016. Originally from New Zealand, Di and her family lived in Male Street, Brighton for many years. A vibrant and energetic person with a zest for life and a gift for bringing people together, Di was a friend to many in the Bayside community and active in local community organisations. Her tireless work as President of BHS saw her named Bayside Citizen of the Year in 2008. As a seller and collector of vintage clothing, she was passionate about fashion history; one of her many enduring contributions to BHS was her extensive work in preserving, developing and promoting the Society's costume collection. In 2018-19, Di donated more than one hundred items from her personal vintage clothing collection to the Society. The collection, which includes clothing, hats, handbags and shoes from local and international designers, is representative of Di's wide-ranging interests, colourful personality, creativity, humour and love of fashion and travel. Of all the items Di donated to the Society, this four-piece Easton Pearson outfit was her favourite. When she bought it around 1997-98, it was the first time she had spent a large amount of money on clothing, and she thought it only fitting to throw a suitably elegant party at which to wear it. James Cameron's hit movie 'Titanic' had just been released, and upon discovering the recipe book 'Last Dinner On the Titanic: Menus and Recipes from the Great Liner', Di was inspired to host a Titanic-themed party for her friends. Held at her home in Brighton in 1998, the event included a string quartet, an eleven-course meal prepared entirely by Di, and a life boat in the backyard swimming pool.A four piece outfit consisting of a blouse/cardigan, camisole, skirt and wrap. Double-layered silk wrap with an outer layer of silk chiffon. Both ends feature and embroidered band of brown and black cotton, copper wire, and copper glass beads. Camisole of black and copper shot polyester rayon with wide shoulder straps and small shoulder pads. Blouse of brown silk chiffon, with a v-neck and eleven silk-covered buttons and loops at centre front. Patch pockets over front hip and full length sleeves. The neckline and sleeve edges are trimmed with copper-coloured glass beads. Full-length double-layered straight skirt with black and copper shot polyester rayon lining and silk chiffon overskirt. The skirt secures centre back with a nylon zip and botton closure. The skirt features a centre front embroidered panel of brown and black cotton leaf and flower motifs, with copper wire and copper glass beads. manufacturer's label: "Oh! Easton Pearson", "Pure Silk", "Polyester Rayon", Care label, "M"costume party, titanic, easton pearson, pamela easton, lydia pearson, australian fashion, di reidie, 1990s

This is a set of 25 photograph of Print Troop Equipment in Lithographic Squadron, Army Survey Regiment at Fortuna, Bendigo, 1990. Photo .1P features the new Howson Algraphy Autoneg printing plate processor. It improved quality control and efficiency and allowed the conversion of printing plates for positive or negative use. The Heidelberg Speedmaster 102 shown in photos .2P to .4P was a computer-controlled five colour lithographic offset printing press. It provided the Royal Australian Survey Corps a vastly improved printing capability, as the five colours for a standard topographic map was printed in a single pass. The print room housing the Speedmaster printing press was named Wayzgoose Hall after a medieval printing house festival. Wayzgoose Hall and the Speedmaster printing capability was commissioned by the Commander of the 3rd Military District BRIG P. Davies AM, ADC on Wednesday 27th June 1990. This occasion is covered in more detail in page 145 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. For additional photos, refer to item 6062.4P for more photos of the Heidelberg Speedmaster printing press. The Print Room’s Map Assessment and Colour Evaluation Stations in photos .5P to .12P provided the Printer Technician suitable viewing environments to perform quality assessments of map samples. See item 6151.34P for more information and photos of technicians using the equipment. The Print Room’s Map Handling Station in photo .15P to .20P provided ergonomic benefits to the Printer Technician and improved despatching productivity. See Item 6070.9P for more information and photos. The Wohlenberg MCS-2 guillotine seen in photos .21P & .22P was a heavy-duty guillotine integrated component of the Map Handling Station, to trim bulk printed map stock. See item 6069.6P for more information and photos of earlier types of guillotine equipment. This is a set of 25 photograph of Print Troop Equipment in Lithographic Squadron, Army Survey Regiment at Fortuna, Bendigo, 1990. The photographs are on 35mm colour slides and were scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, colour, c1990s, Howson Algraphy Autoneg printing plate processor .2) to .4) - Photo, colour, 1990. Heidelberg Speedmaster 102 computer-controlled five colour lithographic offset printing press .3) to .10) - Photo, colour, c1990s, Heidelberg Speedmaster CPC 1-04 control unit. .11) to .12) - Photo, colour, c1990s, Map Colour Evaluation Work Station. .13) to .14) - Photo, colour, c1990s, Linear printing plate registration punch. .15) to .20) - Photo, colour, c1990s, Print Room’s Map Handling Station. .21) to .22) - Photo, colour, c1990s, Wohlenberg MCS-2 guillotine. .23) - Photo, colour, c1990s, Print Room Power supply equipment. .24) to .25P - Photo, colour, c1990s, Print Room Crown Fork Lift..1P to .25P - There are no annotations stored with the 35mm slides.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, printing, litho

A vintage tool made by a obscure early 19th century woodworking Scottish tool maker. This item would have been made commercially for firms and individuals that worked in wood and needed a tool that could produce a flat smooth finish to timber. These tools were used before routers and spindle moulders came into use in the late 19th and early 20th centuries before this time to produce a decorative moulding or to smooth a piece of furniture timber, door trims etc. had to be accomplished using hand tools and in particular one of these types of planes. The subject item is a smoothing plane Known as a Coffin Plane due to its shape. Traditionally wood planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding or had a flat blade use for achieving a flat and smooth finish to timber. The blade, or iron was likewise formed to the intended moulding profile or for smoothing and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and flat bladed planes for a full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about John Welsh is that he was a tool maker and possibly a retailer that operated a business in Dundee Scotland between 1845-1850. This is the only record we have to date that he existed and is from the Master Catalogue of Scottish woodworking tool makers. His tools in particular moulding planes are well sought after by collectors of vintage tools due to their rarity. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves handmade shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Wood Plane Rounded base, blade attached. Owner J Huband Marked J Welsh, Dundee maker and "J Huband" (Owner)flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, plane, compass plane, j welsh, j huband

Booklets are the; "OFFICIAL JOURNAL/ BCOF (JAPAN) ASSOCIATION OF/ AUSTRALIA (INC) Since 1972/ (Navy, Army, Air Force, Women's & Auxilliary Forces)" Please note - "SHINBUN - SHIMBUN" - name change on some booklets. Shinbun and Shimbun - is the correct spelling of the word for newspaper in Japanese. Booklets - Items in the collection of Richard William McGILVERY, RAAF. Refer Cat No. 7287P for his service details, photo, awards.SOFT COVER BOOKLET. ALL BOOKLETS - PAPER WITH BLACK PRINT ON FRONT AND BACK. CHRISTMAS ISSUES HAVE DECORATIVE TRIM IN GREEN AND/OR RED PRINT. ILLUSTRATED WITH " BRITISH COMMONWEALTH FORCES" WITH CROWN ON FRONT COVER. All booklets 32 to 50 pages, cut, plain, white paper. Illustrated with black and white photographs, maps and cartoons. 1. No. 111 Christmas 2003. 2. No. 112 March 2004. 3. No. 113 Winter 2004. 4. No, 115 Christmas 2004. 5. No. 116 March 2005. 6. No. 117 June 2005. 7. No. 118 September/Spring 2005. 8. No. 125 June 2007. 9. No. 126 Sept 2007'. 10. No. 129 June 2008. 11. No. 130 September 2008. 12. No. 131 No. December 2008. 13. No. 132 March 2009. 14. No. 133 June 2009. 15. No. 134 September 2009. 16. No. 135 December 2009. 17. No. 136 March 2010. 18. No. 137 June 2010. 19. No. 138 September 2010. 20. No. Front cover - Handwritten notes in black ink. 2/3/4/5/14/15/19/20. 2. "BCOF Memorial shown Peter Valence". 3. "Ron H ??.d Bede Wall writes about". 4. "BCOF Memorial shown to Peter Valence/ S.C.A.P. means/ Supreme Commander of Allied Powers" 5. "Fraternisation Page to Rob". 6. "The Atom Bomb Poem". 14. "BCOF Memorial to show Peter Valence". 15. "Peter Fraser story given to Rob". 19. "19 mags in this lot". 20. 5 mags full of reference/ most of this book". history, booklets, bcof

Ward Brothers (George and Samuel) registered a company (Australian Sewing Machines Limited Pty Ltd) with the head office address in Errol St, North Melbourne, and Prahan. The earliest newspaper advertisement for this company was in 1897. Around this time the Ward Brothers first imported sewing machines from England and Wertheim placed their decal on them and mounted them in their own Australian made cabinets. David Ward later imported machines from Beisolt & Locke in Germany and registered name  A.N.A. (All Native Australian), his shop was in Collingwood Melbourne. Some of these machines had Ward Brothers decals on them as well. The three brothers sold under the same name as Ward Brothers. The early Ward Brothers logo had a map of Australia with a picture of all three brothers on it. In 1911 all three of the Ward Brothers decided to share a stall in the yearly Melbourne exhibition. The A.N.A was the machine that got rave reviews. It was at this time that the Australian Sewing Machine Company Pty Ltd decided to add the A.N.A logo to their logo to cash in on the new found celebrity status that the A.N.A has gained. To cut a long story short. David Ward took his brothers to court to prevent this from happening. This was a long drawn out affair that took quite a few years. The settlement was decided out of court and nothing was disclosed of the deal that was made. David seemed to have left the scene, then the remaining Ward Brothers and A.N.A. combined and then became “Wardana”. There are many Ward Brothers sewing machines in displays, they originated from Japan, England, America, and Germany. It seems that where ever they got the best deal for sewing machines or parts is the direction they went. This is where the Bendigo sewing machine company came into the picture. All imported sewing machines into Australia drew a government tax. Bendigo Cording's Traction Company was given proposed two-pound tariff protection that gave the company a significant price advantage for its machines. As a result, the Ward Brothers purchased a huge number of Bendigo shares to get cheaper machines for their sewing machine cabinets. Ward Brothers then placed one of their company officials on the Board of “Bendigo Sewing Machines Limited” and the rest is history. Ward Brothers had shops Australian wide and in most of the major country towns. History for “Bendigo Sewing Machines Limited”     Cordings Traction Company owners (H. Keck MLC, W. Wallace, and W. Ewing) operated their business out of the former W. Webb & Co. building in Queen St. Bendigo. Around 1923-1924 they decided to switch from traction engines to manufacturing sewing machines. The actual date is not known but that year's financial report made note of both Cordings and Bendigo Sewing Machines Limited. The switch was made with the government of the day agreeing to a tariff of two pounds per head for every machine head made completely in Australia. The change from traction engines to sewing machines went well. Government representatives visited the factory in Bendigo to inspect and ensure that the sewing machines were Australian made as a result they agreed on granting the two-pound tariff to the company. After the first 12 months, they built 30, the following 12 months the company had produced 1500 machines probably due to the involvement of the Ward brothers. However, the government proposed a new condition to the tariff agreement which was that the company must produce 20% of Australia's requirements for sewing machines. In 1924 after having had produced 1500 machines resulting in reaching their financial limit for tariff support. According to the government, the requirement was 15,000 machines for the next year had to be produced to qualify for the tariff. The company had already reached its production limit and unfortunately folded. There were several attempts to regain government assistance to save this new industry but it was to no avail. Even a promise to open another factory in Sydney was offered but unfortunately wasn't accepted. An item fabricated in Australia from a majority of imported parts from either Germany, America or England giving a snapshot into the early manufacturing industries that were operating at the time of Federation. Sewing machine, treadle, in timber cabinet. Branded Ward Bros, A.N.A., Australian Sewing Machine Coy. Decorative carved timber cabinet, hinged, fold-out laminated timber top and five drawers; two small on each side with handles and one long, shallow, between side drawers without handle. Thread is on bobbin in a rocket shuttle (both in good condition) plus spare empty shuttle (rusty). Brass ‘Half Yard’ ruler inlaid across front, measuring scale in inches and centimetres. Two metal shuttle cover plates (or throat plate / slide plate); front one is impressed with a gauge for needle and thread. Gold trim and decals on flatbed and machine front and back, serial number under shuttle cover, brand on decals and on round metal plate on back of machine. Front right of machine has a bobbin winder. Treadle belt shows signs of wear and laminate on timber machine cover is peeling slightly.Decal coat of arms on right front of machine: kangaroo on left, man with broad-brim hat, holding pick-axe on right, in centre, top “SEWING MACHINE / THE / A. N. A.” then below it, the rising sun, then below that is state of Victoria shield with the Southern Cross constellation. Wheat sheaves around edge on left and flowering plant on right. Gold ribbon banner at bottom with script “WARD BROS.“ Decal of map of Australia on flatbed of machine. States and capital cities are marked and named (no northern territory), portrait of two men. In centre of map are interwoven letters “A. N. A.” and written in script “WARD BROS.” Decal across front of machine body has large, decorated gold lettering “A. N. A.” Decal across the top of machine “THE AUSTRALIAN SEWING MACHINE COY. PTY. Ltd.” Steel shuttle cover at front has an impressed gage listing cotton and needle sizes and number of stitches. Brass disc on back of machine “A. N. A.” in centre. Brass ruler across front of machine has carved or pressed words in the timber. In centre “INCHES” above ruler and “CENTIMETRES” below ruler, and on right above ruler is “HALF YARD” Decal across back of machine’s body “A.N. A. / MADE IN U.S.A.” Stamped into metal under shuttle cover is “219415” (2 and 5 are partially there, first 1 could instead be a 7) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ward bros., australian sewing machine co., a.n.a., treadle sewing machine, rocket shuttle sewing machine, home industry, clothing, wardana, australian sewing machine company, all native australian, dressmaking, clothing manufacturer

Interpretive sign and 4 photos Central Nell Gwynne Gold Mine, used in display. Central Nell Gwynne was located near the corner of Marong Road and Happy Valley Road. Opened in 1906, ceased operation in December 1949. Total production: 61,884 ounces of Gold. Today's Value: $99,014,400. Photos: a. Colour photo, concrete footings at mine site, April 2012. b. Colour photo, Central Nell Gwynne poppet head, April 2012.Poppet head painted white with red trim. Concrete footings in foreround. c. Central Nell Gwynne mine site 1930's. Poppet head and engine room sheds on LH side, trestle way to primary crusher and crushing battery. Tailing dam in immediate foreground. on RH side. Sand heaps in middle foreground. d. Central Nell Gwynne Mine 1930. Underground view, men holding carbide lamps working at 265 level in mine. Large quartz spur formation visible in foreground.bendigo, mining, central nell gwynne

Clothing. Women's cream coloured long sleeved linen nightgown. High round neck with 4.5 cm broderie lace frill. Front has lace bib below neckline (45 cm X 35 cm deep) dipping to a V shape below the bustline. The outer edges of the bib have zig zag ribbon insert lace (4.5 cm) threaded with pink satin ribbon (1.5 cm) tied in bows on either side. The central bib section has vertical lace strips and pin tucks from the neckline. Centre front opening (28 cm) has a placket and is fastened with four press-studs. Long sleeves are trimmed at wrist with pin tucks, 4.5 cm ribbon insert lace threaded with 1.5 cm pink ribbon tied in bows and 4.5 cm broderie lace frill. A shaped nightgown widening to hem. At centre back 20 cm vertical pin tucks run from the neckline.costume, female, women's long sleeved linen nightgown

Postcard with coloured photograph of King Edward VII in a red ceremonial uniform with gold and pale blue trim. Parts of the uniform have been glittered and sequins used on the medals. There is a 7mm cream coloured border at the bottom and a 3mm cream coloured border at the top and sides. On the bottom border left hand side is printed 61 Z. In the middle of the border are the words H.M. King Edward VII. On the right hand side J Beagles & Co E.C. Diagonally across the lower right hand corner of the photograph is printed in yellow Russell & Sons. Postcard has been attached to another piece of card of equal size, however has become largely unstuck. On the reverse across the top appear the words Portrait Bas-Relief Card, The J.B. & Co. Series. Card has been addressed to Miss Dean McKenzie Street Golden Square. A 1 penny stamp with a postmark of Golden Square 27 August 1907 is in the top right corner.J Beagles & Co Londonpostcard

Clothing. Fine white linen fabric. A .8 cm 'tuck' edged at top and bottom with a spoke-stitched border, marks the waistline. Below the waistline is a peplum, split at the centre front with 8 cm deep peaks. These peaks are repeated at the centre back. The peplum tapers to 7 cm deep at side seams. The camisole is trimmed at the top edge with a 4 cm deep band of cotton lace. The top edge of the linen fabric has a double row (off set) of cotton embroidered 'spots' 2 mm in diameter, and three rows of drawn thread work - one cm in width, 3.5 cm wide lace form the shoulder straps. The back opening fastens with six tiny 7cm pearl buttons, and hand-stitched button holes. The lower button fastens with a loop at the waistline 1880-90's. A 'fan' of pintucks, arched from 4 cm long at the ends, to 6 cm long at the centre, fans the midriff at the centre front, above the waistline - 28 tucks in total.costume, female, camisole.

Clothing. White fine linen fabric, trimmed at lower leg with a 2 cms wide cotton , brooierie insertion and a 12 cm wide frill of textured (?) fine linen or cotton lawn broiderie. The front waistband dips to a central 8 cm deep peak. Waistband at side seams, is 4.5 cm deep and back waistband is 10 cm deep at side seams, and the 11 cm deep at centre back. Two 1.4 cm covered buttons close the back waistband. The knickers have a gathered opening panel, called at the time a ''drop-seat'' or ''access hatch'' at the centre back. This panel has a 5 cm deep waistband, fastened at either side by a covered button, and a third button at the centre. These buttons are sewn to the back waistband, and the button holes are sewn, correspondingly on the gathered back. A drawstring tape is also threaded through the back waistband. A 6 cm wide gussett sewn from the crotch extends 23 cms long.Printed in fine black ink on back opening; D.S.R.F. No 11.costume, female underwear, victorian era knickers

This nightgown is believed to have belonged to Mrs Thomas Anne Ward Cole, an early Brighton resident and wife of George Ward Cole. The item appears to have been made or altered to accommodate a pregnant belly, however purpose made maternity clothing was not common at this time. Mrs Ward-Cole’s six pregnancies took place in 1843, 1844, 1845, 1847, 1849 and 1851. The style of this garment in particular the shape of the sleeves would indicate that it is most likely to have been constructed in circa 1860, so whilst it appears to be a maternity item, and historically has been referred to as thus, this purpose cannot be confirmed. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor The Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolishedA hand sewn ivory cotton muslin nightgown, c. 1842–1850. The bodice is made of delicately embroidered muslin in a floral design. The open flat collar features a scalloped lace frill underneath. The bodice fastens with thirteen mother of pearl buttons down the centre front. After the fourth button, the remaining buttons are concealed beneath a full gathered modesty skirt, which falls from just below the bust line. The modesty panel is secured horizontally across the bodice by six mother of pearl buttons. The sleeves finish over the back and palm of the hand in two flattened peaks. The front of the gown consisting of the modesty front is full length. The modesty gown at both sides joins two panels that are an integrated part of the bodice. At the centre back there is a very full gathered panel with lace trim that falls to create a train. It is semi-attached to the bodice with a top section secured with mother of pearl buttons and small ties. The purpose of this design feature is unknown. st ninians, george ward cole, brighton, night gown, thomas anne ward cole