A cream coloured booklet with black details on the front. There are two rusty staples down the left hand side. At the top left there is a stamp saying 5 Field Ambulance, Carrington Road, RANDWICK. N.S.W. The is a code of 7610-66-018-6712 at the top right hand side.australia - armed forces - service manuals, 5 field ambulance, randwick nsw

A blue coloured cover with all information in black ink. Top right corner reads DSN 7610--66-039-4906. Above Australian there is a kangaroo above two crossed swords and a crown above them. Down the left hand side a two punch holesaustralia - armed forces - service manuals, signals, signal training

A bluish grey coloured cover with black writing. there are three punch holes down the left hand side as well as two staples which are very rusty australia - armed forces - service manuals, signals

A cream coloured booklet with two eyelet holes on the left hand side. At the top of the booklet reads 9-14 (hand written) Under this reads DSN 7610-66-093-7741. At the bottom of the booklet in green ink reads FD Hospaustralia - armed forces - service manuals, fire support, 1 fd hosp

A gray coloured cover with black writing on it. The identification code is 7610-66-107-1143 and is in the top right hand side of the booklet. There are two punch holes on the left hand side of the booklet. The booklet is covered with a clear plastic coveraustralia - armed forces - service manuals, land warfare

A khaki coloured booklet that has been covered in plastic. There are two punch holes of the left hand side of the bookelt. At the right hand top of the page reads 7610-66-100-8542australia - armed forces - service manuals, individual training needs

A blie coloured cover with the number 13 written on a white label and stuck on the top left hand side. There are two punch holes down the left hand side. The is a hand written number 3 on the bottom right had side.australia - armed forces - service manuals, m 60 machine gun 7.62

A blue covered manual two punch holes down the left hand side. On the top right hand side reads: 7610-66-100-8541. At the bottom of the page reads 1980australia - armed forces - service manuals, short range anti-armour weapon 66mm l1a2 f1, infantry training

A blue coloured cover with a metal slide clasp down the left hand side. At the top right hand corner reads 7610-66-104-8351. At the bottom reads RESTRICTEDaustralia - armed forces - service manuals, m 60 machine gun 7.62

A blue coloured cover with black writing. There are two punch holes down the left hand side of the manula. Also a white sticker with no writing is also down the left hand side. At the right hand top reads 7610-66-107-1254. At the bottom reads RESTRICTEDaustralia - armed forces - service manuals, rifle 7.62mm l1a1

This mallet is handmade simply from a red gum block and dowel handle. It is complete and has been repaired with screws. Mallets were used to drive timber pieces together without damaging the work.Wooden mallet, with a long dowel length of wood for the handle, attached to a unshaped block of redgum as the head. Small paint stains, and two screws affixed in either end of the handle. mallet, hand tools, churchill island, redgum

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.single handed cross-cut saw. Peg grip missing?circular brass manufacturer's plate: SPEAR & JACKSON Sheffield. Crown symbol.churchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Two handled cross cut saw. One manufactured handle and one bush replacement wedged with three inch nail. 6 broken teeth. Rivets for handle broken off at home-made end. M shaped tooth profile.churchill island, crosscut, saw, tool

Auger bits fit into the jaws of a hand brace (brace and bit), which is used to bore holes into wood. The tapered end, or tapered shank, fits into the brace, while the twisted shank and twisted point draw the bit into the wood. The twisted shank guides the bit into the wood, helping to remove chips produced by the cutters and enabling the user to bore deep straight holes. The collection pictured here includes two common patterns of twist bits: the ‘Jennings’ double twist pattern; and the ‘Irwin’ single twist pattern. Their finely pitched threaded points are typically used to cut hardwood timber.Set of thirteen auger bits, with tapered proximal ends and corkscrew spiraled distal ends. Some with tight and loose spiral patterns. Paint spots and surface rust.[size of each bit stamped on]churchill island, tool, auger bits

Hand shears - also called blade shears - were used to shear sheep prior to the introduction of machine shears and are still used today where no power machinery is available. Hand shears consist of two blades with a hinge at the end furthest from the point. The cutting edges pass each other as the shearer squeezes them together and shears the wool close to the animal's skin. In 1892 Jack Howe an Australian shearer sheared 321 sheep in one day using hand shears. This record has never been broken. This pair was made by Burgon and Ball in Sheffield under patent number 294. Filed in 1865, this brand of shears has been in constant production since then, although this pair was probably made in the 1930s.Spring double handled hand shears for shearing sheep."HIND'S PATENT DOUBLE HOLLOW GROUND BURGON AND BALL PATENT NO. 294 (inside a shield with a crown on top) MADE IN ENGLAND"churchill island, hand shear, burgon and ball, shearing

Hand shears - also called blade shears - were used to shear sheep prior to the introduction of machine shears and are still used today where no power machinery is available. Hand shears consist of two blades with a hinge at the end furthest from the point. The cutting edges pass each other as the shearer squeezes them together and shears the wool close to the animal's skin. In 1892 Jack Howe an Australian shearer sheared 321 sheep in one day using hand shears. This record has never been broken. hand shears with single spring, surface rust, unused, unsharpenedhand shears, sheep shearing, churchill island heritage farm

2 Hands and a smaller face with its own hand Hooped ring Handle Two legs and a third one which is a metal prong Westclox Big Ben