A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone. The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, as the maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture around the mid to late 20th century.Wood hand saw with wooden handle attached to saw by 4 rivets. No blade markings Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, handsaw, wood saw, carpenders tools, cabinet makers tools, wood cutting

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Double ring collar blob finish on neck; upper is wide and rounded, lower is a thin ring. Diagonal lines in glass on neck, low shoulder mould seam, rippled texture around body. Push-up base with pontil mark, rectangular impression in heel. Uneven base. Sediment on inside surfaces.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck and shoulder. Low shoulder mould seam. Body is matt and tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark. Uneven base. Bubble on top of lip. Sediment on inside surfaces. White rubbing line and scratches on outside. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck and shoulder. Low shoulder mould seam. Body is matt with ripples in glass, tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark, visible through glass. Marks on heel. Uneven base. Bubble on side and top of lip. Sediment on inside surfaces. Two score lines, one half way down body, one near base. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Rough applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck. Low shoulder mould seam. Body is matt, tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark, visible through glass. Marks on heel, glass thickness varies. Uneven base. Bubble in glass. Sediment on inside surfaces. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden with open handle blade attached with wingnut lever at side to adjust long narrow blade Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

Plate created to celebrate the centenary of the Melbourne Harbor Trust beginning operations. Presented by Australian Dredging and General works Pty. Ltd. Large blue and white Dutch Delftware ceremonial plate with image of two ships, one sailing ship and the Abel Tasman at sea. The Melbourne Harbor Trust shield features above the ships. "The Melbourne Harbor Trust Commissioners/ 1877 Centenary 1977/ 1877 1977/ Abel Tasman" On reverse: "Presented by/ Australian Dredging and/ General works Pty. Ltd./ Delfts blauw/ Hand painted / Made in Holland/ Wp." Sticker attached "43196 B" "PMA 0166/1"

General Electric turbocharger model B-22 was fitted externally to a Pratt & Whitney R1930 14 cylinder twin wasp radial air-cooled engine for the supply of air at an increased pressure to the carburetor intake. This enabled the B-24 Liberator to maintain a maximum 1300HP at takeoff from sea level to 30,000 ft. ceiling and at high altitude.Round metal supercharger with inlet and outlet.General Electric turbo super charger. GE Ser. No. 872144 FW, A Setting 6, Assembly OD WW 8456556, Model 75-B22-A6 AF Contract or Purchase Order W33-038AC-1699, Spec. H-285022-22 Schenectady Made in US

Hat was part of the uniform of Gellibrand Girls High School, which merged with Williamstown High School in 2000.Straw hat with brim and 5 cm woven blue band with red, yellow and black stripes and elastic chin strip.Written in black felt pen on the inner hat band - Pam Beckman. Makers tag - Created by Effie Jay. Shower-proofed with water repellant formula KO/3420. size 22 1/2. Made of straw fibre. [in black felt pen] Pam Beckman.uniform, hat, williamstown high school, gellibrand girl's high school, 1960s

Matchbook is a give-away / souvenir for Golden Fleece Petrol and Service Stations. The Golden Fleece Petroleum Company was established by H.C. Sleigh in 1913 importing petroleum from California, and was acquired by Caltex in 1981. The Golden Fleece ram trademark was created in 1951 when Golden Fleece petroleum became a single-brand service. The Golden Fleece ram was based on an actual prize winning merino ram named 'David of Dalkeith' from Boonoke Stud, run by the Falkiner family. Single brand service stations did not appear until the 1950s, and distinctive trademarks and logos were used to differentiate and promote the brands. Golden Fleece is also known to have produced other giveaways / souvenirs (such as games, swap cards, calendars, badges, roadmaps etc) to advertise its brand.Matchbook, containing twenty white-tipped, wooden matches. The matchbook has a fold-over, card cover. The front of the matchbook is blue and is printed with the image of a ram in yellow. Below this is the rough area to strike the matches. The back of the matchbook is yellow and is printed with text in red.GOLDEN FLEECE S. & A. Stolzenburg / P/L. / BLACKWELL SERVICE / STATION / Cnr. / Blackburn & Wellington / Roads / CLAYTON 3168 / PHONE 543-1863 GOLDEN FLEECE / MADE IN AUSTRALIA BY / HANNA MATCH . CONTENTS 20 / For Match Supplies Bladon & Puckridge / Melbourne, Sydney, Brisbane.golden fleece petroleum company h.c. sleigh pty ltd, logo merino: sheep in australian art and design - exhibition (29/07/2000 - 04/02/2001), sheep, matches, souvenirs, petrol, california, caltex, ram

Purchased by donor 1967Full length camel coloured suede coat. Trimmed with cream coloured lambs wool around sleeves, hem, neck and front edges. lined with taupe silk lining. Hand cut and craftsman made by Knight Taylors Ltd Invercargill New Zealand Knight Taylors Ltd Craftman guarantee individually craftsman cut from finest New Zealand pelts hand selected cutter Sylvia Johston crafted by Jean Doherty 2/4102

This photograph of John Pascoe Fawkner was commissioned by artist William Strutt in 1857. In 1907 Strutt gave the photograph to Victoria's London agent, Mr. Lake, to be presented to the Victorian Parliamentary Library. In a letter to Mr. Lake now in the library's archives, Strutt describes how he had planned to make use of the photograph in his artistic practice, and when finished with it, had promised to give the photograph to the Victorian Parliamentary Librarian Charles Ridgway (c.1801-1865). "That time then has come, late it is true, but alas Mr. Ridgeway [sic] is dead, so is Fawkner, but the old patriot will ever live in this portrait".Framed ambrotype portrait photograph of John Pascoe Fawkner seated and wearing a smoking cap. Note from William Strutt adhered verso. The ambrotype is a positive photographic image on a glass plate mounted inside a glazed frame with a gold-coloured inner-frame/preserver (possibly celluloid) and black velvet-covered backing board. Handwritten black ink verso: "John Pasco [sic] Fawkner/ This admirable portrait/ of the Founder of Melbourne is now presented in/ fulfilment of my/ promise (made years/ ago to the late Mr/ Ridgeway) to present it/ to the Parliament House/ Library of Melbourne./ William Strutt./ Wedsmnt [?] Dec' 18.1007."strutt, william, 1825-1915, fawkner, john pascoe, 1792-1869, ridgway, charles c.1801-1865, victorian parliamentary library

Cylindrical lawn mower with grass catcher. Green painted catcher and engine cover, orange petrol tank and handles. Pull start with engine control on RHS handle. Name prominantly printed on front of catcher "Qualcast / four stroke / Super 12". Sticker on engine "Stowmarket, SIP (in a red diamond background) Suffolk / Engine type 75G14 Model No. 25A / Made in Englsnd / Recommended Lubricants" followed by a table of lubricant makers and oil specification.machinery, lawn mowing

Ernest Lance Young was born 24 March 1915 in Surrey Hills, the son of Ernest Augustus Young and Ruby Nichell Whitty. He married Beryl Mair in 1939 and died on 5 October 1999 at Mont Albert. Beryl Mair (1916-1976) was the daughter of David Miller (Dave) Mair and Lily Vipond Deakin. Dave Mair (1879-1938) was founder of the Kangaroo Cricket Club based at the MCG. The logo or emblem of the club was a kangaroo facing forward. From this one can assume that Mr Holland was a member of the club. The card was most probably sent prior in 1939 or soon after as following Dave Mair's death, as a mark of respect, the emblem was changed to a kangaroo facing to the left but with its head turned back. (Information from the donor).This is part of a large donation of material relating to the Deakin, Mair and Young families, all of whom had connections with Surrey Hills / Mont Albert. The donor is the daughter of Ernest Lance and Beryl Young.A light green card on thin paper with a total size slightly smaller than A4, folded into four. The lower edge of the front is folded back to reveal an embossed figure of a kangaroo facing forward in burnished gold. Inside are printed greetings personalised from Mr Holland and Marion to Mr and Mrs Young.On the folded triangle of the front in blue biro is the later addition of the number one within a circle. This mark was made by the donor. Inside in blue ink, inner LH side: "To / Mr. & Mrs. Young"; signed below the printed standard greeting in the same hand " Mr. Holland / & / Marion"christmas card, dave mair, david miller mair, ernest lance young, beryl mair, beryl young, mr. - holland, kangaroo club

This dress and bag belonged to Mrs Edith "Dot" Paroissien (nee Jackson, born 1916), who lived in Brighton with her husband David William Paroissien. The dress was purchased from Croyde, a Melbourne designer who had a small boutique shop in Collins Street near the Block Arcade, and the bag was bought for her in London by David. Dot recalled wearing the dress in the 1950s, in particular to a ball at the Royal Exhibition Buildings for Wesley College. She wore it with suede shoes with a medium heel with straps across the instep and long white kid gloves, and accessorised with a baguette choker and drop earrings.Black silk satin sleeveless full-length evening dress. The attached bodice floats over the top of the under-dress. Asymmetrical opening on bodice which features five large flat self-covered buttons. The black suede bag has chrome fittings and buttery cream coloured satin interior. .1 dress - Label, woven black on white acetate centre back: CROYDE / MELBOURNE .2 - bag - Label, printed, black on cream acetate, interior pocket: Susan / HANDBAGS / LONDON; Label, printed, copper on black metal, interior pocket: MADE IN ITALY / FOR SUSANevening dress, croyde, melbourne fashion, melbourne designers, handbag, royal exhibition building, 1950s, edith violetta paroissien, edith violetta jackson

Product label in tones of red, blue and yellow showing printed text and a graphic of sheep under a gum tree. front: [printed] NO RUG TO EQUAL / THE / TRADE MARK REGISTERED / Ba-Ba / RUG / GUARANTEED / ALL WOOL / ABSOLUTELY THE BEST / FOR / WARMTH / WASHING / WEARING / & HEALTH / MADE FROM / PURE / AUSTRALIAN WOOL BY AUSTRALIAN MILLS / No. A W / Size: 72 x 60 / Weight lbsalbion mills, archives, wool industry, blankets, rugs, products, advertising, geelong, packaging, label, graphic design

Item were carried as personal kit into service by Corporal W.C. Clark VX34546First aid item carried into war like service by defence personal as part of their personal effectsA rectangular compressed surgical dressing of absorbent COTTON WOOL with a cloth tape for openingFront printed label, Surgical Dressings / ABSORBENT COTTON WOOL / Compressed / B. P. C. 2oz.; on both ends, Absorbent / Cotton Wool / 2 - oz. ;Reverse printed MADE IN ENGLAND,hand written on black ball point pen "Lent by / Lance Flynn" surgical dressings, cotton wool

Two colour slides of a steering wheel, dashboard and speedometer. One shows 65 miles per hour and the second 70 miles per hour. It was during Operation Firewood. Legatees would organise collection of wood from the country and distribute it to widows in metropolitan Melbourne. Other slides show the cutting and loading of wood and delivery to widows in metropolitan Melbourne. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of Legacy helping widows by sourcing, supplying and delivering firewood. When open fires were the main source of heating, a load of firewood and help moving it, would have been very important to the widows.Colour slide x 2 of the steering wheel and speedometer during Operation Firewood in brown Anscochrome cardboard mount.Printed on front in red ink 'Anscochrome / View from this side / Made in Australia'. Hand written on front of one '65MPH Warming up' and on the other '70MPH just cruising' in blue pen. Printed on reverse in red ink 'Processed by Verycolor photo labs. Melbourne, Victoria'.operation firewood, cars

Pale green glass bottle with white, metal, screw-on lid. It has a beige-coloured label with red and blue writing, and a picture of an orange and a lemon, green leaves and one white flower.On the label: "Kia-ora 50 - 50 Fruit Juice Cordial, made from oranges and lemons. 26 FL. OZ NET. Preservatives: This food contains not more than 2 grains of sulphur dioxide to the pint. Kia-ora Industries Limited, Melbourne - Sydney - Australia".containers, bottles

This item commemorates the war in Vietnam (1962-1972)Irregular shaped wooden plaque with round coloured badge and two rectangular metal plates with engraved dedications.To honor all those Australians who served/their country in the war in South East Asia and/ to remember those who made/ the ultimate sacrifice in the/ defence of freedom. Presented on behalf of Pennsylvania's Vietnam Veterans/ by the Pennsylvania State Council,/ Vietnam Veterans of America/October 3, 1992.vietnam veterans australia, vietnam veterans america, pennsylvania state council, plaque, shield

Part of the 'Mann' collection, used for time keeping by employees in the J. Mann & Sons General Store in Wodonga High Street in the c 1960s. J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the steel and rural produce business to the Kelly brothers in 2006.The Amano time clock has local significance due to its use in the J. Mann & Sons General Store in High St, Wodonga and the association with the prominent Mann family.Green metal electronic Amano time clock used by employees in the J. Mann & Sons General Store in Wodonga, with a brown clock face and light coloured numbers. Two labels on the lower part of the front surface with a horizontal lock between them, and a small metal plate on the proper left side with the model and serial numbers, plus "S 422" written in black marker below. Slot in the top surface of the time clock for the employees' time cards."AMANO" - on the clock face "TIMETEK SYSTEMS / Phone or Fax: / BU..NESS / BISCOM / COMMUNICATIONS" - on the lower front "Model 6733 Serial No 23229 / Volts /240 / Watts 5 / Hz 50 / AMANO CORPORATION / MADE IN JAPAN / S 422" - on the lower proper left sidemann, general store, wodonga, time clock, commerce, local business, high street, j. mann & sons

These postcards are part of an album of postcards which date from late 19th century to mid 20th century.This postcard is in an album of postcards dating from the late 19th century to mid 20th century and, as such, indicate the popularity of collecting postcards in Australia which reached a height in the early 1900s until around 1920.This postcard depicts Union Road, Ascot Vale in the c.1890s-1900s.Front, top: 'Union Road Ascot Vale' Back, top: 'POST CARD' Back, far left, vertical: ' H. V. J. Series' Back, left: 'This space may be used for communication' Back, bottom left: 'Made in Germany' Back, right: 'For Address only.'postcard, 1900s, "green postcard album"

The Eltham Roll of Honour Board was originally commissioned and paid for by the Eltham War Memorial Trust from funds raised by public donation. It was originally hung in the Infant Welfare Centre. In 1999 the Honour Roll Board was removed from the Eltham War Memorial by members of the RSL and relocated to the Eltham RSL sub-branch on Main Road. Following financial collapse of the Eltham RSL sub-branch and merger of the Eltham and Montmorency sub-branches and subsequent sale of the Eltham property, the WW1 obelisk was relocated to a location in front of the Eltham War Memorial. The Honour Roll Board was retrieved by former Eltham District Historical Society President, Harry Gilham in September 2004 who arranged for it to be re-hung in the Eltham War Memorial Hall (former Children's Library) where it was attached to the brick wall face of the west (rear) wall of the Hall (as seen in this photograph). Sometime around late 2018 when Council was investigating the potential sale and development of the Eltham War Memorial, the Eltham Honour Roll Board was once again removed from the Eltham War Memorial by persons unknown, under the pretext of ‘safekeeping,’ to a location outside of the Shire of Nillumbik, in the City of Banyule. In early 2021 Eltham District Historical Society was made aware of the removal of the Honour Roll Board. A formal request was made by EDHS to return this community asset to its rightful place as intended when it was commissioned and paid for by the Eltham War Memorial Trust. This request was rebutted. Nillumbik Shire Council has also since been made aware of the removal of this community asset and formally requested its return prior to Anzac Day, 2021 where it can once again be made accessible to members of the community to pay their respects as originally intended. As of July 2022, the Honour Board remains missing from its rightful place at the Eltham War Memorial. eltham war memorial hall, honour board, honour roll, roll of honour

The Fashion & Design collection of Kew Historical Society includes examples of textiles dating from the 18th, 19th and 20th centuries. Some of the textiles, were used as items of clothing, others as items of household decoration, or simply as travel souvenirs. These textiles were created both domestically and internationally. Predictably with the growth of an ethnically and culturally more diverse community in Kew after the Second World War, textiles, clothing and objects in the collection inevitably reflected this diversity. This form of bobbin lace is made in Malta. It is a guipure style of lace. Maltese lace is worked as a continuous width tape lace on a tall, thin, upright lace pillow called a "Trajbu" and the Bobbins are called "Combini" . Bigger pieces are made of two or more parts sewn together. Lace made in Malta was originally needle lace, from the 16th to the 19th century, when the economic depression in the islands nearly led to the extinction of lacemaking there. But in the mid 1800s, Lady Hamilton Chichester sent lacemakers from Genoa to Malta. They used the old needle lace patterns and turned them into bobbin lace, which was quicker. It was not long after its introduction that the Maltese lace developed its own style from Genoese lace. Maltese lace was shown at The Great Exhibition of 1851 and it became popular in Britain. The style was copied by lacemakers in the English Midlands, and it was one of the sources for Bedfordshire lace. Maltese lace usually has the following characteristics which are useful for identification: It is usually made from cream silk. There is often the 8 pointed Maltese cross as part of the pattern, worked in whole or cloth stitch.The pattern may also have closely worked leaves known as “wheat ears” or “oats”. These are plump and rounded in shape, rather than the long narrow leaves of other types of bobbin lace. Maltese lace edging. It shows the Wheat ears, characteristic of Maltese lacelace, maltese lace, lace tape

A cruet also known as a caster, is a small container to hold condiments such as oil, vinegar, mustard, pepper. Its shape and adornments will depend on the specific condiment for which it is designed. Cruets were made in silver, silver plate, ceramic and glass, and sometimes a combination of two materials, usually as a glass body with a silver or silver plated top.This item is an example of domestic tableware commonly used in the early t0 mid 20th century.An early Sheffield plate stand with four glass decanters. Two with silver lids and two with glass stoppers. Tray has very ornate design.cruet domestic table-setting sheffiels ashberry-philip

The box was presumably made in Australia to be used as a gift container for Christmas gifts or greetings by people associated with the Mission or their acquaintances or family members. The box is dated and has the Mission to Seamen logo and description as a promotional way to describe and inform people of the Mission's purpose. The gift was sent by Mariner Merrylees to sister Marjorie in Manitoulin Island, CanadaThis everyday practical object represents in its function an acknowledgement by the Mission to Seamen organisation of the need for sailors and seafarers to stay in touch with friends and family at Christmas time and this sample box of a wartime Christmas marks a particularly difficult time in history for seafarers to stay in touch and connected with loved ones.Cardboard beige rectangular box in a small size, with blue stamped inscriptions on it detailing promotional information about The Missions To Seamen. The object also has a blue hand written inscription on it on the top side and also another hand written inscription at the back side detailing the recipient’s name "Marjorie". This object was sent to recipient with a coin bracelet inside (Reference: 600.2). Top side of the box, Christmas Greetings/1943/FROM/MELBOURNE/PORT MELBOURNE/WILLIAMSTOWN/THREE OF OVER TWO HUNDRED/CLUBS SCATTERED ALL OVER/THE WORLD TO SERVE/THE MERCHANT NAVY. Top right side of the box a flag crown and attached cord logo image, THE MISSIONS TO SEAMEN/MN Hand written inscription top side of the box, Jivaros Hand written underlined inscription back side of the box, for Marjoriecardboard box, christmas gift, mission to seamen, bracelet, canada, manatoulin island, seamen's mission, mission to seafarers, 1943, ww2, christmas, siblings, melbourne, port melbourne, williamstown, coins, robert leighton, marjorie merrylees, mn, merchant navy

These cards, presumably part of a pack of cards (or two packs) are an advertising tool for Warrnambool rugs made by the Warrnambool Woollen Mill. The Warrnambool Woollen Mill in South Warrnambool was opened in 1910 with John Bennett the first manager. It produced woollen blankets and rugs and woollen products during the war years for military purposes. It closed in 2000.These cards are of interest as an advertising tool for the Warrnambool Woollen Mill which was a major industry in Warrnambool for 90 years. It shows the advertising techniques used by businesses in the 20th century.These are two regulation-size playing cards, both showing the five of clubs, with a colour advertisement for Warrnambool Rugs on the back. The advertisement features an assortment of Warrnambool woollen rugs. On back of cards – ‘Warrnambool Rugs, pure wool’warrnambool woollen mill, cards

This book contains prescriptions made up by the Warrnambool chemist, Michael Ryan. The prescriptions date from 1867 to 1872.. The entries include the name of the customer, the details of the prescription and the directions for use of the tablets or potions. Michael Ryan, born in Ireland, established his business in the Apothecaries Hall in Timor Street, Warrnambool in 1867 and sold it in 1877. This book is of great interest as an example of a Warrnambool chemist's business in the 19th century. It also is an important social record of one aspect of the health of the residents in the district at that time, detailing the medicines prescribed and taken.This is a ledger with a heavy cardboard cover. The spine is almost entirely missing and the cover is tattered. The pages contain handwritten entries in black ink. Apothecaries Hall Prescription Book M. J. Ryan Pharmaceutical Chemist Warrnamboolmichael ryan warrnambool chemist