Ship's binnacle mounted on wooden stand possibly ornamentalTrade Mark 'Sistral', Henry Brown & Son Ltd, Station Works, Barking, Essex, Type SJbinnacle, compass

QMM historyHistorical details of original QMMArchitect's statement re QMM building Jun 1985Reverse " NIL ".historical references

A hand driven echo roller reader.echo sounding, hydrography

A round hand held navigational engineer compassEngineer Compassnavigation, compass

Marlin Depth recorder DIR 110A paper type recorder fishing, depth recorder, instruments

Various artifacts from the steamship 'Wattle'. The Steam Tug Wattle, a steel ship, was built as a harbor tug in 1933. Steam is supplied from a two-furnace Scotch Marine wet-back boiler which was originally fired with dewatered and filtered waste oil but has recently been converted to burn distillate for environmental and maintenance reasons. It was launched at Cockatoo Island on 27 June 1933 by Cockatoo Docks & Engineering Co. Ltd. (CODECO) on order from the Commonwealth Shipping Board. Now fully restored it operates excursions in Port Phillip and the Yarra. One of a very few still operating steam tugs.Brass inclinator mounted on timber plate.steam tug wattle, harbour tugs

Various artifacts from the steamship 'Wattle'. The Steam Tug Wattle, a steel ship, was built as a harbor tug in 1933. Steam is supplied from a two-furnace Scotch Marine wet-back boiler which was originally fired with dewatered and filtered waste oil but has recently been converted to burn distillate for environmental and maintenance reasons. It was launched at Cockatoo Island on 27 June 1933 by Cockatoo Docks & Engineering Co. Ltd. (CODECO) on order from the Commonwealth Shipping Board. Now fully restored it operates excursions in Port Phillip and the Yarra.Solar Reflector with spirit level in wooden boxst wattle, navigational intruments

Copy of letter from The New Zealand Government Trade Commissioner to Mr.L.MacPherson Manager RVAC dated 03.08.64 seeking appraisal and opportunity to supply.

Iron-framed Thurmer upright piano with dark wooden panels. Two marks where candlesticks or other objects may have been attached can be seen on the front panel. Decorative carving on sides. 2 pedals.Thurmer; Sole Agents Allan & co. Pty Ltd Melbourne, on front. Paper sticker inside top lid - 'Ferd. Thurmer'.musical instruments, keyboard, thurmer, piano, augusta borrack (ziebell), leo borrack, allan & co.

Used by police in Trentham to test prospective drivers for colour blindness as part of licence testing.Relates to history of police presence in Trentham.perspex squares. coloured red, green, orangepolice

Upright Wooden Shipboard Piano stawell

Estey Methodist Church Organ. Wooden frame.stawell

Used in the Albion Mill to determine the pressure in the departments requiring steam such as the boiler and dyeing rooms. Circular brass object with black hand painted text and numbers, and a central dial. Printed: PRESSURE / GAUGE / LBS. PER INCH. DANE TAYLOR & Co. Pty. Ltd. / MELBOURNE [on base]: 277828instruments, pressure gauge, albion mill, dane taylor & co pty ltd, south melbourne, geelong, wool industry

Albion Mill Whistle – 'The whistle signalled the changes in shifts and Geelong residents regulated their lives by it.' – exhibition label, In the FactoryCylindrical shaped brass object mounted on a wooden base.Printed: STEAM WHISTLE / ALBION WOOLLEN MILLS 1869 - 1964instruments, pressure gauge, albion mill, dane taylor & co pty ltd, south melbourne, geelong, wool industry

Believed to have been played in the saloon of the S.S.Casino by a crew memberBlack and tan button accordion played on the S.S.CasinoInitials "W" and "D" Scratched onto handlelocal history, musical instruments, keyboard

Whistle used to mark lunch time and finish of day shifts at the Glaxo Factory from the 1920's to the 1980'sThis Glaxo factory whistle played a significant role in the fabric of the populace of Port Fairy signalling lunch time and end of the working day from 1929 to 1980. Cylindrical Brass Steam Whistle with square openings in either side and thread on basecommerce, signals, glaxo, glaxo - welcome, glaxo smith kline, milk factory, glaxo wellcome, gsk, pharmaceutical

William Jackson Thomas is credited with making the first ever telephone call in Victoria. Thomas was a customs inspector at the Geelong Customs House and a keen amateur scientist, astronomer and woodworker. He experimented with electricity and induction to develop his own telephone soon after its invention by Alexander Graham Bell. He built most of the experimental telephone equipment himself – right down to the screws. According to the Geelong Advertiser, on 27 December 1877, Thomas held a telephone conversation with friends in a summer house 40 metres away.This instrument is of great historic significance as the instrument which made Australia's first telephone call in 1877, between two houses in Geelong. Although predated by Alexander Graham Bell's invention, this instrument is an example of Australian innovation and design; characteristic of Australian communications history. The instrument has excellent provenance, carrying a descriptive plaque about the use of the item. As an early prototype of a telephone, it is an incredibly rare example of communications technology.Stained wooden rectangular box containing mechanism with circular turned section at one end being the receiver and transmitter. There are 3 metal screws at the rear and a leather strap running from one of these to the transmitter/receiver. A label is on the base.On label: "First telephone made in / Victoria 1878 / Used experimentally between / Geelong and Ballarat and Geelong Queenscliff. / Maker WJ Thomas Esq. / Late H.M. Customs Geelong / Certified by A.C. Thomas For the above W.J.T."telephone, inventions

Gunter's chain (also known as Gunter’s measurement) is a distance measuring device used for surveying. It was designed and introduced in 1620 by English clergyman and mathematician Edmund Gunter (1581–1626). It enabled plots of land to be accurately surveyed and plotted, for legal and commercial purposes. The provenance of this particular Gunter Chain is unknown but it is believed to be used either by the City of Bendigo / Sandhurst or the Lands Department locally when measuring and laying out plots and streets locally. A 66-foot (20.1 m) chain divided into 100 links, marked off into groups of 10 by brass rings or tags. Each link is 7.92 inches (201 mm) long. A quarter chain, or 25 links, measures 16 feet 6 inches (5.03 m) also called a a rod (or pole) measure. Ten chains measure a furlong and 80 chains measure a statute mile. city of greater bendigo surveying

A pennyweight was a unit of mass that was equal in weight to 20 grains, one twentieth of an ounce and one 240th of a Troy pound. The abbreviation for a pennyweight is ‘dwt’ (denarius weight). These measures and weights were typically used for weighing gold and other precious metals. Group of eleven weights and measures including seven rectangular pennyweights with clipped corners and marked 10 DWTS, 6 DWTS, 5 DWTS, 4 DWTS, 3 DWTS, 2 DWTS respectively, two gram weights; 5 grams and 4 grams with top right pressed corner and two cup troy weights marked 4oz TROY and ½.284.1 10 DWTS 284.2 6 DWTS 284.3 5 DWTS 284.4 4 DWTS 284.5 3 DWTS 284.6 2 DWTS 284.7 1 DWTS 284.8 5 GRAMS 284.9 4 GRAMS 284.10 4 oz TROY 284.11 ½ city of greater bendigo commerce, making a nation exhibition, city of greater bendigo mining

Victoria became a separate colony of the United Kingdom on 1 July 1851; however it took until 1864 for a workable system of weights and measures administration to be introduced. Standard of weights and measures were obtained and issued to local authorities to administer in their local areas. These standards were numbered, as were the Crown stamps used by inspectors to indicate that trade weights and measures had been checked and found to be legal to use in the day-to-day businesses of local traders. By the 1870's each local council had a set of standards that were used to test the scales, weights and measures of local merchants and businesses.Standard 28lb brass measure. Ball shaped weight with single handle on top. Front; Standard / lb / 28 AV / Potter / London / 25.8.1864 / 24.3.90 / 9.6.95 / 17.10.00 / 5.10.05 / 20.3.11 / 25.8.16 / 27.9.21 / 10.11.26 / 17.11.31 / 16.11.35 / 4.12.41 / 24.11.52city of greater bendigo commerce

A Control Joy Stick presented to Pilot Officer Eric V. Read in 1937 after it was recovered from an aircraft he was flying had crashed in the Brisbane Ranges in December 1936. Eric Read was a 21 year old RAAF pilot who was on a flight over the Bacchus Marsh region to make meteorological observations. Read's plane came down in bad weather and crashed into a heavily wooded area of the Brisbane Ranges between Staughton Vale and Mount Wallace. An extensive air and ground search was conducted and after 32 hours Read was located, alive, but badly injured and unable to get out of the cockpit of the plane. He was first located from the air and then a rescue party was able to reach him through rough country and bring him to safety. Read recovered from his injuries and many years later gifted the control stick of the aircraft he had been flying as an item for the collection of the Bacchus Marsh and District Historical Society.This item is of local historical significance as an object related to a notable aircraft accident and subsequent rescue of the pilot. It is also significant for its rarity as a surviving piece of aviation equipment from this era.Control or Joy stick mounted on a wooden base.aircraft, aircraft accidents, eric v. read

used on horse tackle in 19th and 20th Centuries and imported by Holden and FrostSold and used by Holden and frost for Military Agricultural and civilian use C1900Nickle plated plain terret threaded shaft with circular opening on topequine, military, agriculture, civilian c1900, terret

The date of manufacture and age are unknown. It is believed to be original to the lightstation. Of six Victorian lightstation collections surveyed, Cape Nelson is the only one with a stop‐watch. The watch is significant as an intact and relatively uncommon object remaining at a Victorian lightstation and has first level contributory importance for its historical values.The circular, top‐winding metal stop‐watch has an associated blue velvet‐lined, square case. The watch bears an inscription but the date of manufacture and age are unknown. It is believed to be original to the lightstation. The watch bears an inscription etched into the back." C. of A. / C.L.S. /^ / No 101" and on a sticker "C of A / D.O.T. ....."

The battery powered set, which dates from the second half of the twentieth century, comprises two main components, the electronic keyer with a single lever for tapping, and a transmitter (?), both connected by a keying cable. Morse code was invented in the 1830s by American, Samuel Finely Breese by using electrical signals to quickly transmit information over a long range. In the early 1890s Italian inventor, Guglielmo Marconi improved the technology to the point where it became an essential device used for commercial and government purposes. The first practical applications were demonstrated with maritime messaging, where this simple mode of communication was seen as a timely replacement for the historic practice of signaling by flags, lights and foghorns. Cape Schanck has an earlier Morse code key, which is original to the lightstation (CSLS 0035), and Cape Otway has another early example although its provenance to the lightstation has not been formally verified (COLS 0074). The Morse code set has first level contributory significance for its historical value as an earlier communications device that has since been made redundant by more sophisticated technologies.Morse code key set. Comprised of the tapping component and a metal box part with a white electrical cord.Yes

This portable, hand held visual signaling lamp, with trigger mechanism and inner reflective disk, was used for optical communication via Morse code, with the concave mirror tilted to focus the light into pulse signals. Larger versions of these lamps are fixed on ships or pedestals and have shutters in front of the light that are opened and closed to transmit signals. Smaller hand held versions like the Cape Nelson example have a concave mirror that is tilted to focus the light into pulse signals, and despite their size the lamps were renowned for their brilliant light. Invented by Arthur C W Aldis (1878‐1953) and pioneered by the British navy in the late nineteenth century, they continue to be used to the present day. Details on the Cape Nelson lamp include a serial number, a date of 1960 and the initials of the Department of Transport, which at that time incorporated the Commonwealth Lighthouse Service. Another lamp of the same date which is held at Wilsons Promontory was provided to the lighthouse by the Department of Shipping for signaling ships but was also used for communicating with Cliffy Island, 18 nautical miles away. Point Hicks also has an Aldis lamp and an associated case, which is painted an army green colour. A fourth lamp and case formerly at Cape Schanck disappeared from the collection sometime between 1995 and 2003. These types of lamps are not rare in museum collections.These types of lamps are not rare in museum collections however the Cape Nelson example has a reliable provenance to the lightstation and has first level contributory significance as a fine example of the Aldis lamps that were distributed to lightstations throughout Victoria and Australia.This object is comprised of a black metal encased Aldis lamp with electrical cord and associated wooden carrying case with metal clasp and red leather hand grip. yes

This Farrand & Votey pump organ was manufactured in Detroit USA c1885. It was lovingly restored by the late Peter Frost of Tallangatta. The organ was gifted to Peter in 2000 in a state of disrepair and was not working. Peter was born in Devon, England in 1930 and completed an apprenticeship in joinery and cabinetry, specialising in ornate church and cathedral furniture. He migrated to Australia in 1957 and became a highly regarded woodwork and building science teacher as well as a Building Inspector. He was also a passionate musician. On completion of the refurbishment Peter gave the organ to his daughter at Georges Creek. Farrand & Votey started out as the Detroit Organ Co. in 1881. They started building pipe organs in 1888. Votey did pioneering work on piano players, developing the famous Pianola. However, in 1897 the company split up, Farrand remaining with the reed organs as the Farrand Organ Co., and Votey taking the pipe organ and player piano business. The Farrand Organ Co. later brought out its own piano player, the Cecilian, but went bankrupt in 1915.This organ is an example of a craftsmanship from the late 19th century and has been fully refurbished by a skilled craftsmen from the Tallangatta district near Wodonga.An upright Farrand & Votey Pump Organ which was originally manufactured in Detroit, USA. It has been fully refurbished and is in working condition. Ron Fudge, a pump organ restorer in USA has dated it at c.1885 based on its serial number 14404 83.Above keyboard: "Farrand & Votey"farrand & votey, pump organ, organ restoration