Has a strong association with the uniforms and caps of the SEC tramway crews, yields information about their manufacture.Plastic strip, or chin strap cut from a premanufactured strip, with slots at either end, a buckle, a loop and two small rivets to be used as a cap band for the SEC tramway crew caps. The slits at either end were fitted over the cap buttons (See Reg Item 4452) Possibly made by the Australian Government clothing factory. The strap could be adjusted to be used as a chin strap if needed. Two No.tramways, trams, uniforms, cap, crews

Yields information the appearance of the SEC tram fleet in 1943 when parked in City Loop. None of these trams remain in Ballarat today.Digital image from the Wal Jack Ballarat Album of trams 23, 22, 25 and 29 in Sturt St loop 11-12-1943. In the background is the Ballarat Courier Building and in the background is an advertisement for Plume, and City Mutual Life insurance. See image i2 for rear of photograph. See image i3 for hi res scan of print. See image i4 for hi res scan of negativeon rear of photo in ink, "SEC Ballarat, No. 23, 22 ex Adelaide 69 and 92, 25 and 29 ex MMTB Sturt St 11-12-43" and in top right hand corner Wal Jack copyright stamp with number "T56" written.trams, tramways, sturt st, city loop, grenville st, tram 23, tram 22, tram 25, tram 29

Yields information about the services on the Mt Pleasant line and tram tours.Colour slides, Kodak white cardboard mount, developed Mar 1969 of trams 37 and 34 crossing at the Grant St Loop. No. 37 showing special, while No. 34 has destination of Gardens via Drummond North and is carrying an auxiliary sign "Trotting Bray Raceway Friday night". Barkly St, Mt Pleasant. See Reg Items 7675, 7678, 7681, 7684, 7686, 7705 and 7713.ballarat, tramways, trams, barkly st, mt pleasant, grant st, tram 37, tram 34

Small round gilt bronze commemorative medal with loop. Profile of HM Queen Elizabeth II on obverse surrounded by the inscription "CORONATION OF QUEEN ELIZABETH II JUNE 2ND 1953" and "AMOR" near the left shoulder. The City of Caulfield Coat of Arms (unofficial version) is depicted in the centre circled by the inscription "CITY OF CAULFIELD VICTORIA" around central coat of arms. Deterioration due to areas of oxidation on both sides.Obverse - "CORONATION OF QUEEN ELIZABETH II 2ND JUNE 1953" around Head of Elizabeth II and "AMOR" near Queen's shoulder- Reverse - "CITY OF CAULFIELD VICTORIA" around central coat of arms.

This bodice belonged to Mary Crombie, an early Victorian dentist, who lived in Brighton while she was studying at the Australian College of Dentistry in the mid-1900s, and later returned to the area in her retirement from 1949-1971. Mary Margaret Crombie (1884-1971) was born at Coan Downs Station near Walgett, northern New South Wales, where her father Henry was station manager. After Henry’s untimely death in 1895, Mary and her mother loved for a few years with family members in St Kilda, before moving into a cottage of their own, ‘Rosewood’, at 42 Asling Street, Brighton around 1899. From here, Mary attended Oberwyl Ladies College in St Kilda and later the Australian College of Dentistry, one of only a few women to study dental surgery at the time. She was apprenticed to Ada Tovell (1865-1932), one of Victoria’s first female dentists, who had her own practice in Collins Street. Mary graduated in 1907 and the following year moved with he mother to Yarram in South Gippsland, where she took over the running of a practice owned by Sale dentist Charles Trood, eventually purchasing it from him in 1915. Speaking to a Brighton newspaper in 1961, Mary said she believed that she was the first woman to start a dental practice in Gippsland. For some locals, this took a little getting used to: “Many were amazed, and had some misgivings, when they found that the local dentist was a woman,” she said. “I always remember a huge farmer (he was about 6 ft. 4 in.), who had fortified himself at the local hotel to face the ordeal of visiting the dentist. He almost turned and ran when he saw me. … He was still more amazed when I pulled out his tooth without undue trouble.” The farmer was the best advertisement she could have asked for, telling everybody about the diminutive lady dentist who had calmly extracted his tooth. Mary practiced in Yarram until her retirement in 1949. After selling her practice she returned to Brighton, where she spent the last two decades of her life residing at 25 Oak Grove. Following her death in 1971, her relatives in Brighton donated a number of items from her home to BHS.Black satin bodice, boned, with black faceted glass buttons down the front. High collar. Both collar and cuffs are edged with a black net ruffle. Two rows of seven black crochet-covered buttons at each cuff, fastening with loops. Stray brown threads poking through fabric around the collar, shoulders and back indicate that these areas may originally have featured lace embellishments.mary crombie, 1900s

The item is a representative example of previously standard issue uniform and is in excellent condition. As a set alongside 0040.1, the uniform has aesthetic significance in its design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field trousers in disruptive pattern colours of green, khaki and browns. Two pockets on either hip, two pockets on both thighs fastened by two plastic buttons and one pocket on the back right side, fastened by a single button. Five large belt loops encircle waist, held in place with a dark green khaki button. Trousers fastened with a zipper and button, and adjustable tabs around hip bones. camouflage, uniform, australian defence force, disruptive pattern

Representative of military issued accoutrements, possibly Australian Army, late 20th Century. Army water canteen, possibly Australian Army issued, with olive green fabric insulating cover featuring flaps with stud fasteners, black twist top lid attached to aluminium body fixed by aluminium chain that is attached both to base and top of lid. Back of fabric cover has a metal prong threaded through a strong fabric loop which has been sewn on for attaching to a belt. Tag on back sewed on which reads 'Made in Japan'. flask, canteen, military, military accoutrements

Representative of military issued accoutrements, possibly Australian Army, late 20th Century. Army water canteen, possibly Australian Army issued, with olive green fabric insulating cover featuring flaps with stud fasteners, black twist top lid attached to aluminium body fixed by aluminium chain that is attached both to base and top of lid. Back of fabric cover has a metal prong threaded through a strong fabric loop which has been sewn on for attaching to a belt. Tag on back sewed on which reads 'Made in Japan'. flask, canteen, military, military accoutrements

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; an unpainted, rectangular wooden frame with a top and sides, similar to a small rectangular stool. A solid half-cylinder shape was added under the horizontal 'seat' with another smaller half-cylinder attached to it, end-to-end. A string is tied between two metal loops attached to the back. There are two X marks stamped into the back. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.Stamped: "X" "X"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

Used by tramways to indicate the position of the person to a passenger or another employee. Most likely made as a general production item by Stokes for tramways and railways.Demonstrates an item made to indicate the wearer's position of the tramway employee.Uniform Badge for a "Conductor". Manufactured by Stokes and Sons, Melbourne. Made from a cast brass item and then nickel plated. Cast in the form of the handwritten or script word/s and underlined and rounded to fit on a cap. On the rear, silver soldered on are two brass loops at either of the badge to enable to be sewn or fitted with clips onto a cap. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. tramways, trams, cap badge, hat badge, uniforms

BHS CollectionBlack fox / fur stole, lined with polished cotton lining(?). Lining pleated at back neckline. Two fox heads- one either side of front shoulder. Front panels- 11.5 cm X 52 cm finish with a luxuriant fox tail, and two smaller ''tails'' on each side. Neck panel at back 16cm wide. Metal hook, chain and loop fastening at centre front.costume accessories, female, black fox fur stole.

Awarded for long and efficient sevice in the colonial era Silver Medal mounted on a decorative arm. Ribbon is made up of two 9mm Violet Bars set astride a 14 mm off white bar. Ribbon is susbended by a silver hanging loop Obverse face has a St. George Cross with 5 stars inside of a belt surmounted by a crown. This is surrounded by the words Local forces Victoria. The Reverse of the medal has " For long and efficient service" embossed on itFranz Kaaden PTE 1st Battn Inf BDE5/6rvr, officers and sergeants, long service medal, victorian, colonial

Clothing. Navy blue textured fabric possibly crimplene. Long tapered sleeves fastened with three covered buttons and loops at the wrist. High back neckline shaped to a V shape at the front. Centre front opening fastens with sixteen covered buttons and loops. Front yoke has a rouleau trim of fleur-de-lyse, and circular coils from 1 cm to 1.5 cm diameter. Side front panels are shirred at the yoke seam, and gathered at the shaped waistline panel. Waistline has a diamond shaped panel- 2.5 cm wide at the side seams, and eleven cms wide at the centre. Where the buttons extend over the midriff panel, the panel is shaped in a 7 cm V shape. Midriff panel extends into a belt at the side seams, fastening at the centre with a press-stud, and decorated with a flower of seven rouleau coils-1 cm in diameter. Hand stitched hem.costume, female, long sleeved navy dress

An example of a Telephone Set D Mk V which was used by Australian forces during the Second World War for verbal and Morse code communications over short distances via a telephone line.An example of a Telephone Set D Mk V which was used by Australian forces during the Second World War for verbal and Morse code communications over short distances via a telephone line. Rectangular aluminum green painted box with broad canvas webbing strap secured to the side of the body through metal loops. Two vertical webbing loops are attached to the rear of the body. Stencilled in black on top TELE. SET. D. MK. V.'. The housing opens by a hinged fold back lid that is secured by a hook and eye closure. Attached to the inside of the lid are two metal plates. The first is a circuitry diagram, the second is the instructions for use of the set. The interior contains the phone assembly and is divided by a metal shelf. On the left is a bell with two screw terminal in front. At the center is the telegraph key and behind that is the battery box with a small metal plate with, 'TELEPHONE SET. D.MK.V To the right is metal box with two terminals in frontAttached to the bottom of the shelf is a slide out metal key Below the shelf is a compartment in which is stowed a black metal headset with provision for a bakelite handset with attached cord and four-prong plug.Tele Set stamped on outside of unit. Inside lid plaque - Telephone Set D MK V

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "CARLTON ST. CAR SHED LOOP." stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The part with the words "CAR SHED LOOP" appears to have been ground down and a previous location name taken out and replaced. Used a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath with the words "SEYMOUR ST LOOP GREGORY ST LOOP." stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The part with the words giving the two locations appears to have been ground down and a previous location names taken out and replaced. Used a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, , 4996 and 4497 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals

Set of 22 black and white photographs of the first trams along Wendouree Parade, 8 Dec. 1974 (See 1974-75 Annual Report) .1 - Rolf Jinks at depot Junction .2 - 27 entering Wendouree Parade - Clyde Croft .3 -ditto with Richard Gilbert with the flag .4 - 27 crossing the parade .5 - In Wendouree Parade .6 - ditto .7 -At St Aidans Drive .8 - ditto .9 - 27 returning to the depot .10 - ditto .11 - 40 returning to the depot .12 - 40 at the loop - Richard Gilbert and Clyde Croft .13 - ditto .14 -ditto .15 - 40 at St Aidans Drive .16 - ditto .17 - ditto .18 - the dust is flying. .19 - 40 at Gardens Loop .20 - ditto .21 - Wendouree Parade .22 - 40 entering the Parade. Photographer Eldon Hogan. Roll of negatives held - stored with negatives file.trams, tramways, btps, wendouree parade, first tram, testing, tram 27, tram 40

Yields information about Ballarat Tramways and trams prior to the closure of the tramway system.Set of 10 digital images of Ballarat trams prior to closure, scanned from original slides by Stuart Lodington, 1971 prior to closure of the system. .1 - No. 27 at Lydiard St North terminus with passengers alighting/boarding and an enthusiast about to turn the pole. .2 - No. 27 and No. 30 Skipton St at the Bell St Loop. .3 - No. 13 at the Mt Pleasant terminus, showing destination of Gardens via Drummond St North. .4 - Crews of No. 31 (Conductor and Driver) reversing pole of No. 31 at the depot. .5 - No. 11 inbound on Victoria St. .6 - Night view of a tram at a terminus. .7 - Scrubber on 0 road at the depot .8 - No. 14 at Gardens Loop with another tram behind and the driver standing in the front of the tram. .9 - No. 13 (Mt Pleasant) inbound in Sturt St with 14 behind. .10 - No. 26 northbound to Lydiard St north, about to cross Albert St Sebastopol with the SSW shop in the background. trams, tramways, sebastopol, lydiard st nth, skipton st, bell st, mt pleasant, victoria st, depot, albert st, tram 27, tram 30, tram 13, tram 11, scrubber, tram 14, tram 26

Set of 11 Agfa Plastic mounted slides - from the Eldon Hogan collection - possibly on an ARE Bendigo tours late 1960's or early 1970's with No. 18 Scanned on the Canon scanner at the depot 15/12/1971 at the time of the installation of the scanner. .1 - No 18 at Golden Square terminus with Billy Rodda's Golden Square Hotel in the background. .2 - ditto and the Victoria Bitter fence alongside the hotel. .3 - ditto and another single trucker. .4 - No. 18 at the Fire Station Loop, Golden Square line, with destination of Railway Station. .5 - No. 18 passing the Central Deborah mine, Violet St. Tram has a Briquette advertisement on the roof - the flaming briquettes. .6 - Another bogie tram at ditto. .7 - No. 18 and No. 6 crossing McCrae St loop near the depot junction? .8 - ditto .9 - No. 18 and a single trucker at the North Bendigo terminus. .10 - ditto .11 - with the single trucker leaving.tramways, trams, bendigo, golden square, central deborah, north bendigo, mccrae st, tram 18, tram 6

Yields information about the 2010 Begonia Festival, the trams during the Parade and has a strong association with some of the volunteers.CD compact diskette in a paper envelope, containing a set of 14 images of the Begonia Weekend 2010, taken by Austin Brehaut. .1 - Trams on the depot fan on the morning of 6/3 .2 - 671 and 28 at Carlton St - 8/3 .3 - Begonia Festival parade spectators inside 661 - 8/3 .4 - ditto .5 - 671 and people for the Parade 8/3 .6 - The Parade about to happen - 661 and 671 at the loop - 8/3 .7 - 661 and people for the Parade 8/3 ,8 - Peter Winspur views the coming parade 8/3 .9 - Viewing the parade - 8/3 .10 - Peter Bruce viewing .11 - Bill Kingsley viewing .12 - Graeme Cleak using 671 to view the Begonia Festival 8/3 .13 - 661 and 671 laid up at the loop - 8/3 .14 - 27 being prepared for a repaint and repairs.On CD "Begonia Weekend 2010 / A. Brehaut" and on paper case "Peter Winspur"begonia festival, depot, wendouree parade

The flywheel possibly belongs to a Walker's Cherub Mark III Ship-log taffrail, how the flywheel operates is a metal loop of the recording log would have been connected to the flywheel, so you could see if it was spinning properly. After the flywheel, is the rotor that was towed behind the ship and the revolutions of the rotor would register on the indicator, thus measuring the distance the vessel had travelled. Thomas Ferdinand Walker (1837–1921) first patented the Cherub log in 1878. It was one of the first logs in which the recorder was placed onboard a ship rather than being incorporated as part of the rotor. The Cherub Mark III series was produced from 1930 it came in two versions a thousand-mile which is quite rare and a five hundred-mile version.This ship log flywheel was invented and made by a significant marine instrument maker and innovator of machinery Thomas Walker. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades to measure the distance travelled at sea updated versions are in use today by mariners.Log Governor (or Fly-wheel) from a Ships Taffrail Log, metal wheel with 6 spokes, hub has rope attached for connecting to ships log. Boss the other side for attachment to the spinner.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, log governor

Design credits, james craig, nigel rowe, jacob thompson. Cover art Matt Turner, photography Jacob Thompson. Foreword by Studio coordinator, Gavin Nash. Lecturers Doug Bartlett, Sam Harmer, Luke Keys, Gavin Nash, Travis Price, Nic Wai. 21 students: Glen Bellman, Penelope Boadle, Nikhil Bora, Mark Cassells, James Craig, Chris Downey, Aiden Grant, Daniel Hatcher, Jacob Lai, Scott Matthews, Phillip McDonald, Tim McDougall, Jena Ramando, Charlie Ryan, Nigel Rowe, Saeed Salimpour, Claire Skrobalak, Elisha Sullivan, Jacob Thompson, Matt Turner, Aimee Young. Exhibition opening held Thursday 27 November, 2008 at Loop Bar, 23 Meyers Place, Melbourne.Promotional 88 page catalogue created by University of Ballarat, Bachelor of Visual Arts (Graphic Design / Multimedia) third year, graduating students, 2008. Multi-page full colour book, uncoated brown perfect bound cover, single colour (black) deboss.university of ballarat, federation university, graphic design, multimedia, camp street campus, bachelor, degree, arts academy, glen bellman, penelope boadle, nikhil bora, mark cassells, james craig, chris downey, aiden grant, daniel hatcher, jacob lai, scott matthews, phillip mcdonald, tim mcdougall, jena ramando, charlie ryan, nigel rowe, saeed salimpour, claire skrobalak, elisha sullivan, jacob thompson, matt turner, aimee young

20th C and probably earlier families could make this simple 'knitting machine' by using a piece of round, hollow wood and knocking 4 nails into one end of the cylinder leaving a protrusion of 2cm. An empty cotton reel was commonly used with left over knitting wool. Children were taught to wind the wool around the nails in loops, figure of 8 and other patterns so that a chain was made which gradually protruded through the base of the cylinder as a knitted chain. The chains could be made to any length and then sewn together to make a usable object eg face washer.Gladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals the City of Moorabbin and she was skilled in hand knitting, crochet and dressmakingGladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals in the City of Moorabbin and this Doll was made and used by her family.c1950A small piece of painted, carved wood with central hollow and 4 nails on top used for making/ knitting a woollen chain.Painted doll featuresknitting, clothing, haberdashery, crochet, doilies, brighton, moorabbin, pioneers, dressmaking, market gardeners, early settlers, craftwork , bentleigh, lacework, moorabbin shire, reed gladys, dairy farms, fruit orchards

The Postcards show trams of Launceston which operated from 1911 to 1952, published by International Railway Postcards of Launceston. The background card gives a short history of Launceston trams and the reproduction of two tickets. 1 - Postcard 1 - No. 11 leads a line up of cars in Elphin Road - Ken Flood 6-3-1948 2 - No 27, Mumford St loop - Ken Flood - 9-10-1948 3 - No. 24 Wellington St, photo Ken Flood, 26-2-1949 4 - No. 9 turns from George St into Cameron St - 25-9-1948 - Photo Ken Flood 5 - No. 26 - Talbot Road terminus - 1-11-1948 - Ken Flood 6 - No. 9 Elphin Road, 13-10-1948 - Ken Flood Yields information about Launceston trams, the Museum having No 14 on display, No. 14 from 2022.Set of 6 black and white postcards and a story card. Each have a caption on the rear and a place for a stamp and address.launceston, tramways, tramcars

Black and white photograph, of Cr. M. Martin driving No. 30 during the inauguration of the new Ballarat rolling stock during 1935. The Councillor is wearing a SEC drivers cap and a conductors cash bag. See also Reg. Item 3010 for the Official Party photograph. Photographed in Drummond St. North? with a crossing loop behind. Tram has "Special" showing. In the bottom right hand corner of the photograph has the imprint "Richards & Co Ballarat". See Reg Item 2965 for the same photo of this item in SEC May 1936 issue of "Contact", which gave the date of September 1935. 3011.1 - Digital image from the Wal Jack Ballarat Album of the same photograph. Photos not to be taken out of the album unless for photographic copying. Use image files. Yields information about the rehabilitation of the Ballarat tram fleet and new trams acquired and refurbished by the SEC from Melbourne, in particular No. 30. Taken at the time of the official launch of the tram by the SEC with the Mayor of Ballarat at the front of the tram.Black and White photograph contained within Reg. Item 3000 - Photo Album produced by the SEC in 1935 titled "Photographs of Ballarat Tramways Rolling Stock & Track Reconditioning Works".Has a TMSV Copyright stamp on the rear, which has been crossed out.tramways, trams, secv, tramcars, ballarat, rehabilitation, conversion, launch, drummond st nth?, tram 30

Modern industrialized Berber carpets are distinguished by a loop pile construction type that gives a similar appearance to the distinct knot of traditionally woven Berber carpets. The modern carpets usually contain small flecks of dark colour on lighter shades of background colours resembling a natural undyed version of the traditional carpets. Berber is known for being one of the oldest and most durable kinds of carpet. Traditionally, Berber carpets are carpets hand-woven by the Berber people in North Africa and the Sahara. The carpets come in traditional and modern designs, which are distinguished by different knotting patterns, dyes and fabric textures. The origin of carpet weaving by the Berber populations dates back several millennia. The hand-spun cloth they created was named after the individual tribe, and they used natural fibres to create cloaks, rugs and other fabrics. Card showing printed text and graphic featuring an image of a sheep in tones of orange, brown and cream. Printed: PURE NEW WOOL / THE / LOOK OF / BERBERcollins bros mill pty ltd, manufacturing, geelong, wool, berber

Set of 28 photographs of the operation of the BTM during the Begonia Festival, including the loading of the Horse Tram for Melbourne on Sunday 10/3/2002, operation in Melbourne on 11/3/2002 and reloading in Bourke St. Taken by Warren Doubleday, on Kodak paper. 2013.1 - Tram 671, Wendouree Parade, 10/3/2002 at Depot Junction .2 - 33 at Loop .3 - 40 and 33 south of the loop, heading for Carlton St. .4 - ditto .5 - 671 returning to the loop from St. Aidans Drive .6 - 40 returning to the loop from Carlton St. .7 - 33 ditto .8 - Loading horse tram at Depot Junction - Alastair Reither .9 - ditto .10 - in St. Kilda Road, 11/3/2002 at about 7.30am .11 - ditto .12 - Tram in Moomba parade, 11/3/2002 - Reg Smith, Len Millar - horse Bear. .13 - ditto .14 - ditto .15 - ditto, after passing with the Ned Kelly's. .16 - ditto - and John Clowes on rear platform .17 - the line up near Bourke St. with V214 behind the horse tram - "Tram Stop Ahead" sign .18 - the line up from Bourke St. with Hawthorn 8 alongside. .19 - Being photographed - Arthur Cook, Roma Cook, Merle Clowes and John Clowes with other visitors .20 - ditto .21 - Malcolm tram, and BTM ten in the background .22 - BTM and Sydney Tramway Museum tent in the City Square area. .23 - Pushing the horse tram across Bourke St. - John Clowes. .24 - Loaded back on the Crane Heavy Haulage (Associated Towing) truck, looking north along Swanston St. .25 - ditto .26 - ditto, general scene in Swanston St. .27 - The towing truck and tram .28 - Hawthorn 8 and Milan 1692 crossing Bourke St. Negatives held on file with documents list.horse trams, depot junction, moomba, gardens loop, swanston st, tram 1, tram 33, tram 40, tram 671, tram 8, tram 214, tram 1692

DCPU (Disruptive Pattern Camouflage Uniform) Work dress trousers. Colours - light to dark green through to mid to dark brown. Gore-Tex (Polyester/laminate) type fabric for wet weather. Worn as overpants. Drawstring cotton cord at waistband, with plastic look clip. Two side pockets, at ankles loop and hoop adjustable strap. White colour polyester fabric manufacturers label, inside back waist band.Manufacturers information on label - black ink print. " REFLECTIVE/ IMAGES/ O/N G5.202857/ N/S/N 8405/66/145/7099/ AUG 2003/ BATCH: 912726/0004/ SIZE: XL- 82 CM/ NAME:/ SERVICE/ CARE INSTRUCTIONS/ DRY CLEANABLE/ MACHINE WASHABLE 40dc/ DO NOT BLEACH/ DO NOT SPIN DRY/ DO NOT WRING/ HANG TO DRY/ LIGHT/ COOL IRON".uniform, army, work dress, dpcu, trousers

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, CollectiomTwo pairs of khaki polyester trousers each with two side pockets and one hip pocket with button down flap. Each has seven belt loops. A fob pocket is on the RHS just below the waist band. Zipper fly. Waist band is closed with a metal hook. Calico manufacturer's label sewn onto the hip pock lining. Washing instructions label is sewn onto the inside of the waist band..1) Handwritten on name label in black ink: ' 556101, CHAP T.B. WILLIAMS'.army chaplain, uniform, major thomas b. williams

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Green Army issue work trousers with adjustable waist band, two side pockets, two button down hip pockets and two button down thigh pockets. In addition there are five button down belt loops. All buttons are green plastic. The waist band is secured at the front with a button. Fly is a button down type. A green manufacturer's label with black printing is sewn on the inside back of the waist band.Handwritten in black texta on inner waist band: 'TOM WILLIAMS' Printed on manufacturer's label: 'A.G.C.F., VICTORIA,1987 (upwards arrow), WAIST AND SIZE, 84/94R, 8405.66.029.6610, ARMY NO, NAME'.army chaplain, uniform, major thomas b. williams