Has a strong association with tram crews and the ticket / revenue collection system. Tram crews used them to contain their tickets when selling to the passengers.3674.1 - Sheet of leather, approx. 2mm thick, stained brown with four pockets formed on each side with another sheet of leather, stitched with dark brown cotton, on all sides to form pockets to hold eight blocks of tickets. Used by Ballarat Conductors until early 1970's to hold stocks of tickets prior to sale. 3674.2 - as above - but a stippled leather finish to the outside of the leather. trams, tramways, secv, tickets, conductors

Demonstrates the method of dispensing tickets by conductors, how the tickets could be arranged, although the arrangement may not exactly represent the 1958-1963 arrangements of a ticket wallet. Yields information about the style and printing of tickets used in Ballarat and Bendigo tramways and how they were presented. Has a strong association with Travis Jeffery.Ticket wallet with a set of nine 1950-60's Ballarat tram tickets set up to represent a typical conductor's set of tickets by Travis Jeffrey, though these may not exactly line up with the fares at any one period - 1958 to 1963 following the introduction of concession tickets. Does not have a 3d City Section Ticket. 4000 - Sheet of leather, approx. 2mm thick, stained brown with four pockets formed on each side with another sheet of leather, stitched on all sides to form pockets to hold eight blocks of tickets. Stitching is a light cream or white colour cotton. The stitching on one side that forms the pockets has been removed, possibly by Travis, to present the tickets. 3992 - 7d black 3993 - 6d teal 3994 - 5d green 3995 - 4d brown 3996 - 4d Parcel check 3997 - 2d Red 3998 - 3d orange 3999 - 2d concession - red 4001 - 3d concession - orange 4002 - 2d City Section - red See Alan Bradley's notes "Fares in Ballarat"trams, tramways, secv, tickets, conductors

Sheet of leather, approx. 2mm thick, stained brown with four pockets formed on each side with another sheet of leather, stitched with dark brown cotton, on all sides to form pockets to hold eight blocks of tickets. Used by Ballarat or Bendigo Conductors until early 1970's to hold stocks of tickets prior to sale. Collected by Travis Jeffrey at an unknown date. See Reg. Item 2775 for a wallet holding 8 blocks of tickets.trams, tramways, secv, tickets, conductors

Demonstrates the method of dispensing tickets by conductors, how the tickets could be arranged, during the last period of Ballarat Tramways - 1971 fare system. Yields information about the style and printing of tickets used in Ballarat and Bendigo tramways and how they were presented. Has a strong association with Travis Jeffery.Ticket wallet with a set of eight 1970's Ballarat tram tickets set up to represent a typical conductor's set of tickets by Travis Jeffrey. 2775.1 - Sheet of leather, approx. 2mm thick, stained brown with four pockets formed on each side with another sheet of leather, stitched on all sides to form pockets to hold eight blocks of tickets. Stitching is a light cream or white colour cotton. 2775.2 - 4c ticket block - C511306 - C511399 - See Reg. Item 1715 for full details 2775.3 - 7c ticket block - C981113 - C981199 - See Reg. Item 1718 for full details 2775.4 - 5c City section ticket block - A357688 - 357799 - See Reg. Item 1725 for full details 2775.5 - 7c City section ticket block - A148080 - 148199 - See Reg. Item 1726 for full details 2775.6 - 8c ticket block - A896327 - 896399 - See Reg. Item 1719 for full details 2775.7 - 13c ticket block - B486983 - 486999 - See Reg. Item 1721 for full details 2775.8 - 16c ticket block - A572369 - 572399 - See Reg. Item 1723 for full details 2775.9 - 18c ticket block - A369492 - 369599 - See Reg. Item 1724 for full details. trams, tramways, secv, tickets, conductors

.1 - Book - 12 pages + brown covers, side stapled, issued by the Australian Standards Association, "AC Electric Arc Welding Plant - Transformer type", C97-1942, July 1942. .2 - Book - 40 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard B1 - "Brass water fittings - stop, bib, globe and ferrule or main taps", B1-1928, August 1928. .3 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard B4 - "Vegetable tanned leather belting", B4 - 1929, January 1929. .4 - Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard B3 - Rubber Conveyor and Power Transmission Belting", B3 - 1929, March 1929. .5 - Book - 8 pages + green covers, side stapled, issued by the Australian Standards Association, "Maintenance of Portable Chemical Fire Extinguishers of the Acid-Alkali and Foam Types", CA 18-1941, May 1941. .6 - Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard B2 - "Copper Tubes", B2 - 1928, July 1928. .7 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard A2 - "Portland Cement", includes tests, A2-1926, December 1926. On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" .2 - 3 Sep 1928 .3 - 19 Jan 1929 .4 - 3 Apr 1929 .5 - SEC Stamp - ? 1941 .6 - 20 July 1928 .7 - 17 Apr 1934trams, tramways, power station, standards, materials

Demonstrates the method of dispensing tickets by conductors, how the tickets could be arranged, during the last period of Ballarat Tramways - 1971 fare system. Yields information about the style and printing of tickets used in Ballarat and Bendigo tramways and how they were presented. Ticket wallet with a set of eight 1970's Ballarat tram tickets set up to represent a typical conductor's set of tickets. .1 - Sheet of leather, approx. 2mm thick, stained brown with four pockets formed on each side with another sheet of leather, stitched on all sides to form pockets to hold eight blocks of tickets. Stitching is a brown cotton. .2 - 4c ticket block - C366800 - 366999 .3 - 5c City section ticket block - A381600 - 381799 .4 - 7c City section ticket block - A162001 - 162199 .5 - 8c ticket block - A934201 - 934399 .6 - 10c ticket block - C468600 - 468799 .7 - 13c ticket block - B316400 - 316599 .8 - 16c ticket block - A585400 - 585599 .9 - 18c ticket block - A483200 - 438399 Ticket numbers have not been checked for intermediate numbers. trams, tramways, secv, tickets, conductors

The book original cover is dark green that has been wrapped in brown canvas to protect it. It has a leather spine with red and black labels. The pages in the volume are divided in columns: 1) Number of application, 2) Date of registry, 3) Date of application, 4) Surname, 5) Christian name and address, 6) Parish, 7) Allotment, 8) Section, 9) rea, 10) Local land board schedule, 11) Decision, 12) Special condition, 13) License, 14) References and remarks. The dates of the applications are from 30th August, 1874 to 26th April, 1876.On the front canvas cover: sec 173/174 3420. On the spine red label with gold letters: Application register. A black label with gold letters: all other sections land act 1901 (some of the letters are damaged)application register, land act 1901, 1874 to 1876

Used by conductors or conductors to retain and sell tickets from.Demonstrates the method of dispensing tickets by conductors, how the tickets could be arranged. Yields information about the style and printing of tickets used in Ballarat tramways and how they were presented.Sheet of leather, approx 2mm thick, stained brown with four pockets formed on each side with another sheet of leather, stitched on all sides to form pockets to hold eight blocks of tickets. Stitching is a white colour cotton. Has four blocks of tickets. 80c - blue - A 1016901 - Ballarat Vintage Tramway 30c - purple - A 69601 - Ballarat Tourist Tramway 10c - black - A 114000 - Ballarat Tourist Tramway 5c - red - A 137000 - Ballarat Tourist Tramwaybtm, ballarat tramway museum, ballarat tramways, tickets, ticket wallet, sec, conductors

G. Harper was a saddler and harness maker located at Bath Corner, Charring Cross. He advertised in The Bendigo Advertiser in 1892A brown suitcase with two metal clasps which could be locked. There are two travel stickers, ones a Victorian railways luggage Melbourne Albury which is partly missing, the other is The CHALET MT BUFFALO Nation Park. On the inside of the lid there are two labels one is black with gold letters G. HARPER NEW BAG SHOP Leather Goods & Ladies' Hand Bags Travelling Bags & Trunks Saddler & Harness Maker Charing Cross BENDIGO The other is light blue with black writing, QUALITY Guaranteed M.B. Fibre CASE.182 underlined made in bendigo, suitcase, g. harper saddler and harness maker

By 1904 Mr E R McMartin was the manager and licensee of the Shamrock Hotel including the Shamrock Tobacconist that had previously been owned and run by Mr Karl Van Damme.Dark brown pipe cover in shape of pipe, leather exterior and textured cream fabric interior, with hinge at smoke exit end of pipe and small metal latch at bottom of pipe tube. Red sticker on inside of cover reads "Shamrock tobacco Store E.R. McMartir Bendigo" in black ink Pipe made of plastic mouthpiece joined halfway along tube to wooden tube and smoke outlet by a fancy metal (Hallmarked as silver in Chester, England 1912)surround. Ash contained in smoke outlet/exit. Top of smoke outlet has an approximately 1.5cm crack.tools, smokers acoutrement

Victoria and its Metropolis past and present. This is Vol. II of a two-part set. Leather bound with a black cover, heavily ornamented in gold around the edges of the cover and with the printed material also in gold lettering in an ornamental pattern. The spine of the covers is brown with gold ornamental patterns and printing. Volume Two has 822 pages with many black and white illustrations and chapters on the regions in Victoria and biographical notes on the pioneer settlers of these districts. Volume one was written by Alexander Southerland. Volume two by L.J. Ellery, W.C. Bernot, Baron Ferd. Von Mueller, J.E. Nield, A.A.C. Le Souefand Henry Giles Turner. Published in 1888 in Melbourne by McCarron & Bird.history, victoria, 1888

Used by conductors or conductors to retain and sell tickets from. Demonstrates the method of dispensing tickets by conductors, how the tickets could be arranged. Yields information about the style and printing of tickets used in Ballarat and Bendigo tramways and how they were presented.Sheet of leather, approx 2mm thick, stained brown with four pockets formed on each side with another sheet of leather, stitched on all sides to form pockets to hold eight blocks of tickets. Stitching is a dark brown colour cotton. Has seven blocks of tickets, possibly of Bendigo origin, each with 200 tickets. 4c - red - C551400 5c - orange - City Section - A391000 5c - yellow - B796200 7c - City Section - purple - A183800 10c - black - C468800 13c - black - B602000 18c - brown - A482200 tramways, trams, tickets, conductors, sec, ticket wallet

Ticket wallet with a set of four 1970's Ballarat tram tickets set up to represent part of a typical conductor's set of tickets by the BTM for display purposes.. 74.1 - Sheet of leather, approx. 2mm thick, stained brown with four pockets formed on each side with another sheet of leather, stitched on all sides to form pockets to hold eight blocks of tickets. Stitching is a light brown cotton with nickel plated steel staples at each end. Stamped "W 98" onto one side. 74.2 - 5c City section ticket block - A375800 - 375999 - See Reg. Item 1725 for full details 74.3 - 8c ticket block - A937800 - A937999 - See Reg. Item 1719 for full details 74.4 - 10c ticket block - C819400 - C819599 - See Reg. Item 1777 for full details. 74.5 - 15c ticket block - A382800 - A382999 - See Reg. Item 1777 for full details. trams, tramways, secv, tickets, conductors

Used by George Moore in his last race, the 1971 Victoria Derby, won by classic Mission. Saddle was gifted to Classic Mission's trainer Syd Brown following the race.Leather saddle

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of off white leather shoes with rounded toes and a sling-back buckled strap. The shoes have a brown insole on which is embossed in gold print Mescher Paris.Made by M. Faris / All leather solefootwear, women's shoes, mescher of paris

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. A pair of wide shaped and heeled women’s leather slingback shoes designed by Moya in shades of brown, red and ochre.women's shoes, moya -- shoes, footwear

A wooden racquet with concave throat, blue painted stem, plastic whipping, and brown cloth tape handle grip. Decal across throat, on both sides, features the inscription: JC HIGGINS/OUR OWN TRADE MARK/CADET. Below inscription is the head and shoulders profile image of a military cadet in uniform. Initials 'LH' have been etched along stem on obverse. Materials: Wood, Nylon, Glue, Lacquer, Metal, Ink, Leather, Adhesive tape, Paint, Plastic, Cloth tape, Clothtennis

A concave, wooden racquet, with white cloth-taped shoulders,brown string whipping, green cloth collar, and a medium-depth grooved handle. Decal across throat on obverse: LA BELLE. Inscription stamped along right side of handle: SLAZENGERS LTD/MADE IN ENGLAND. Inscription along left side: LAURENCE POUNTNEY HILL/LONDON. E.C.4. Butt cover contains maintenance instructions. Inscription across throat on reverse: MAISON BLANCHE/MADEIRA. Materials: Wood, Gut, String, Cloth tape, Metal, Glue, Lacquer, Leathertennis

A green, yellow and brown enamel painted wooden racquet with fibreglass strip around outside of head. Inscription, from head to handle, on both sides: CHALLENGE/OC/OPEN CHAMPIONSHIP BY SLAZENGER/SMOOTH. Inscription along right side of stem: EXCLUSIVELY CHOSEN BY THE WINNERS OF THE WORLD'S MAJOR FOUR TITLES/& WORLD PROFESSIONAL STARS * KEN ROSEWALL * JOHN NEWCOMBE. Materials: Wood, Nylon, Metal, Glue, Lacquer, Leather, Ink, Ribbon, Plastic, Paint, Adhesive tape, Fibreglasstennis

A cream, orange, yellow and brown enamel painted wooden racquet with fibreglass strip around outside of head. Black panther emblem features across throat, on both sides, and butt cap. Inscription, from head to handle, on both sides: .../SLAZENGER CHALLENGE/FINEST QUALITY IMPORTED TIMBER/SMOOTH. Inscription along right side of stem: EXCLUSIVELY CHOSEN BY THE WINNERS OF THE WORLD'S MAJOR FOUR TITLES/* KEN ROSEWALL * JOHN NEWCOMBE * MARGARET COURT. Materials: Wood, Gut, Metal, Glue, Lacquer, Leather, Ink, Ribbon, Plastic, Paint, Adhesive tape, Fibreglasstennis

A wooden racquet with solid, and tapered, convex throat, cloth tape shoulder reinforcements, and medium grooved handle. Features early use of laminated wood strips, nailed to side of stem, and up along throat and lower head. This is also painted brown. Inscription across throat on obverse: TUNMER/"SPECIAL". Inscription across butt cover, in French: A.A. TUNMER/& CO.//PARIS/A GARDER SOUS PRESSE. Adhered onto the throat on obverse is a small metallic - possibly silver - monogram, possibly spelling the initials K.B. On the throat on reverse, is inscription in French and Latin: MARQUE DE FABRIQUE DEPOSEE/ATA/IN HOC SIGNO VINCES. Materials: Wood, Gut, Cloth tape, Ink, Glue, Lacquer, Leather, Metal, Painttennis

A wooden racquet with a laminated, concave throat, brown whipping, and fine-grooved handle. Decal along throat on obverse: BLUE RIBBON. Decal of company trademark across throat on reverse, inscription in front of large 'W' reading: THOS.E.WILSON & CO. Hand carved name along stem on obverse: JACK. Hand carved initials along throat on reverse: MV. Materials: Wood, Gut, Metal, Ink, Lacquer, Glue, Leather, Cloth, Stringtennis

A wooden racquet with green, white and black striped "indestructo" plastic shoulder reinforcements, brown lozenge decal on both faces of stem, and short, leather handle grip. Inscription across throat on obverse: MCLAUGHLIN (sic)/SCHOLASTIC. Inscription across throat on reverse: WILSON. Inscription along left side of stem: INDESTRUCTO REINFORCEMENT/WRAPPING.Right side; SELECTED/SECOND GROWTH ASH. Materials: Wood, Nylon, Metal, Ink, Lacquer, Glue, Leather, Plastic, Stringtennis

Two part object. (1) An AMF/Head (possibly 'Edge' model) tennis racquet, featuring: twin shaft, aluminium alloy frame; brown plastic bridge; nylon net strings; brwon leather handle grip; brown plastic shaft casing; and, black plastic butt cap. 'Triple Head' logo features on adhesive label on bridge. No model name visible. Etched into sides of both shaft pillars are owner's details: 'CATHERINE BONE/ 318 50 OAKS/265-1665'. (2) AMF/Head brand cover for racquet head and throat. White vinyl with brown, tan and chocolate branding across centre. Plastic zipper with metal pull tab. Materials: Metal, Plastic, Nylon, Adhesive tape, Leather, Adhesive label, Vinyltennis

A metal Chemold Owen Davidson-endorsed tennis racquet with double shaft and metal bridge. Brown plastic shaft casing and butt cap. Adhesive labels on shaft casing and butt feature Chemold logos. Handle wrapped with tan & black leather grip tape. Materials: Metal, Plastic, Adhesive label, Leather, Nylontennis

A metal Chemold Roy Emerson-endorsed tennis racquet with double shaft and metal bridge. Brown plastic shaft casing and butt cap. Adhesive labels on shaft casing and butt feature Chemold logos. Handle wrapped with tan leather grip tape. Materials: Metal, Plastic, Adhesive label, Leather, Nylon, Adhesive tapetennis

A Dura-Fiber XR-Graphite tennis racquet, featuring IPC core, brown frame with open throat, handle grip wrapped in tan leather printed with manufacturer name. Plastic butt cap. Manufacturer's logo on shaft and butt cap. Plastic strips around head as anchor for strings. Materials: Wood, Metal, Fibre, Leather, Adhesive tape, Vinyl, Plastic, Inktennis

Two part object. (1) A Dura-Fiber XR-Graphite tennis racquet, featuring IPC core, brown frame with open throat, handle grip wrapped in tan leather printed with manufacturer name. Plastic butt cap. Manufacturer's logo on shaft and butt cap. Plastic strips around head as anchor for strings. (2) Original vinyl head cover with zip, featuring manufacturer name and logo and model name. Materials: Wood, Metal, Fibre, Leather, Adhesive tape, Vinyl, Plastic, Inktennis

Two-part object. (1) A Dura-Fiber XT tennis racquet, featuring black frame with open throat, hand grip wrapped in leather. Plastic butt cap printed with manufacturer's name. Manufacturer and model name also along shaft. (2) Brown & black vinyl head cover with zip. Printed with manufacturer and model name and words: 'TOTAL FIBREGLASS/MADE IN USA'. Materials: Wood, Metal, Fibreglass, Leather, Adhesive tape, Vinyl, Plastic, Inktennis

Two-part object. (1) A Fischer 'Powerwood' model tennis racquet, with teardrop shaped head, cloth whipping on shoulders, handle wrapped in perforated leather, and a plastic butt cap impressed with manufacturer logo. Modela name on base of head; manufacturer name and logo along shaft. (2) Brown vinyl racquet head cover printed with manufacturer logo and name in silver. Materials: Wood, Vinyl, Adhesive tape, Cloth tape, Leather, Ink, Plastic, Paint, Metaltennis