Showing 3392 items
matching melbourne founding of
-
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Medal - British Medical Association President of Gynaecology and Obstetrics medal associated with Professor F.J. Browne, 1938
Francis James Browne died in Sydney 1963. He had a long career in obstetrics and gynaecology. Summary of appointments include: General Practice in Wales, Maternity Department of the Edinburgh Royal Infirmary, 1st director of obstetric unit, University College Hospital London. Retired and continued postgraduate teaching in London and NSW. Married to Grace Cuthbert, who was director of Maternal and Baby Welfare in NSW. A collection of objects found amongst Professor FJ Browne's papers were transferred from the Archives to the Museum collections in January 1994.A round metal badge with a green enamelled rim. There is a shield in the centre which is divided into three. In the left hand comer there is a flag, in the right hand comer the medical insignia, and at the bottom of the shield there is a sailing ship. The year 1938 is either side of a central white enamelled plug with the number "106" on it. Attached to the badge is a green grosgrain ribbon, to which is attached an oblong bar with a pin at the back. Inscriptions Around the edge of the badge: "THE BRITISH MEDICAL ASSOCIATION PLYMOUTH"; inscribed on the back of the badge: "BRUFORD, EASTBOURNE AND EXETER"; front lower right hand side ofbadge:"M & W"; front of bar: "PRESIDENT/ GYNAECOLOGY and OBSTETRICS"numismatics, browne fj, rcog -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Louros type figurine collected by Dr Frank Forster, c. 1978
This statue is a Louros type statuette, known from the Louros cemetery of Naxos, Greece. The figure is standing and has some plastic features. There are no facial features and no arms, just stumps at the shoulders. Such figurines are found in ancient graves. This is most likely a replica of an antique figurine originating at Naxos cemetery, Greece. Cycladic figurine depicting a feminine figure on carved pedestal. A wire necklace with medallion is attached, and inscribed YNNE-TAN with laurel wreath. Handwritten inscription in ink on base (see inscription). Sticker attached to base carries handwiring which reads 'FF'.Louros type figurine 2800-2300 B.C. Nat. Arch. Museum Athens 1978 -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Framed photograph of Professor Gilbert Strachan
Gilbert Innes Strachan (1888-1963) was educated in Glasgow and Bristol. He was a fluent lecturer and a stimulating and dogmatic teacher. Strachan was a founding member of RCOG (London) and served on its Council from 1929- 1955. He was one of the pioneers of the use of radium in treating uterine cancer, receiving a CBE in 1953 for his work in this area. Professor Strachan donated a coat of arms to the Australian RCOG during a visit (pre- 1963). Professor Strachan died at his home in Cathedral Road, London on December 9, 1963, following a short illness. He was 75.Framed black and white photograph. The photograph is a side-on portrait photograph of Professor Gilbert Strachan, a white haired man with steel-rimmed spectacles, a dark suit, and a white shirt. Label on back of frame reads 'Professor Gilbert I Strachan CBE LID'. Frame is made of gold coloured metal and carries a simple wave pattern. The back of the photo is secured by a piece of orange and cream patterned chipboard, held in place by eleven small photograph tacks.Professor Gilbert I Strachan CBE LIDrcog -
Australian Gliding Museum
Machine - Glider - Sailplane, 2012
The ES52 Kookaburra is a two seat high wing glider – sailplane of wooden construction designed by Harry Schneider and built Edmund Schneider Pty Ltd. It was first flown on 26 June 1954 and became the glider of choice for training new pilots of many gliding clubs around Australia in the 1950s, 1960s and 1970s. Several found there way to New Zealand. Further two kits were sent to Brazil and at least one of these was finished and flow successfully. The ES52 performed well with a glide ratio of about 22:1 and had soaring and cross-country capabilities. A notable feature of the ES52 design was the staggered side-by-side seating arrangement of the cockpit. This made for good in flight communication between instructor and trainee. Overall, thirty six were built by Edmund Schneider Pty Ltd. A longer wing version (the ES52B) was also introduced that had a better glide ratio (around 25:1). Five examples of this version were built. In Germany a modified ES52 was built incorporating a metal tube fuselage frame and with the addition of a engine driven propeller mounted on top of the wing which enabled the glider to be self launching. This museum collection item consists of the fuselage, tailplane, elevators, fin, rudder from the Mark I, ES 52 Kookaburra, formerly registered as VH-GFF and last owned by the Barcaldine and District Airsports Club of Queensland. The glider was in a damaged condition when it was acquired by the Museum. A decision was made by the Museum to repair the glider for display rather than endeavouring to restore it to an airworthy condition. The reconstruction of the wings is being undertaken by using parts of damaged ES 52 Kookaburra wings (as it happened from later ES 52 Marks). The Log Book for VH-GFF reveals operational life with a succession of gliding clubs around Australia. This exhibit will be of interest to gliding enthusiasts wishing to inspect the popular two seat club trainer of a by-gone era.This is a wood and fabric covered aircraft that is being rebuilt from the components of several aircraft as a non-flying exhibit.Fuselage marked with Edmund Schneider Pty Ltd Serial Number 9 and comes from the glider previously registered as VH-GFF.australian gliding, glider, sailplane, edmund schneider, es 52, kookaburra, barcaldine and district airsports club, victorian motorless flight group, alice springs gliding club, raaf richmond, raaf williamtown, gayndah gliding club, blackwater gliding club, southern downs aero and soaring club, charleville gliding club -
Australian Gliding Museum
Machine - Glider – Sailplane, 1963
The Skylark 4, the final in the Slingsby Skylark series, dates from 1961. The design heralded a trend towards the use of plastics in the construction of gliders. Slingsby incorporated GRP (glass reinforced plastic) panels to achieve a streamlined fuselage nose and cockpit area while retaining the more traditional wood techniques for the rest of the aircraft. Another notable feature was the smooth wing surface that was obtained using a Gaboon ply skin across the ribs. Best glide performance of 1:33 was found to be comparable with the early full GRP glider designs. The Museum’s example (VH-GTB – C/N 1382) was built in 1963 and originally owned by Chuck Bentson of the UK. It was brought to Australia in 1967 by Jeremy Picket-Heaps and flown at various places including Benalla, Cooma and Gundaroo. In 1970 the glider was transferred to the New England Soaring Club. Many flights were made from Armidale and Bellata in Northern New South Wales. On one occasion, the glider was kept aloft for 8 hours 45 minutes and on another the pilot took it around a 500 kilometre triangle in nearly 8 hours. In 1980 it was sold to Ralph (“Feathers”) Crompton and was flown extensively in South Australia until 1988. The final owner before the glider was given to the Museum in 2004 was Ross Dutton of Melbourne. The last recorded flight occurred in 1992. The glider at that point had logged over 2000 hours flying time from about 2000 launches. The airframe is currently being restored to flying condition. Technically this aircraft represents the state of the art at the stage that sailplane design was changing from traditional wood construction to composites (GRP) The Slingsby Skylark 4 is high wing single seat sailplane of mainly wooden construction with plywood and fabric covering. However, the cockpit and forward part of the fuselage consists of glass reinforced plastic which was innovative at the time that the type was designed. The cockpit provides for a semi reclining position for the pilot protected with a full Perspex canopy. The wings are made up of a centre section with constant chord and tapered wing tips. The aircraft has a conventional arrangement for the tail stabiliser / control surfaces. The sailplane bears construction number 1382 and is registered in Australia as VH-GTBaustralian gliding, glider, sailplane, skylark, slingsby, bentson, picket-heaps, crompton, new england soaring club, dutton -
Australian Gliding Museum
Equipment - Glider – Hang Glider Type, 2013 - 2014
Otto Lilienthal (1848-1896) from Berlin, Germany, is widely credited as being the first person to make repeated successful gliding flights. He was known for adopting a thorough scientific approach founded on observations of the flight of birds in relation to the problem of inventing a man carrying heavier than air machine that would fly. He developed and tested bird-like gliders controlled by weight shift by the pilot (a similar method to modern hang gliders). The pilot held on to the glider with his forearms resting in hoops mounted on the main structural beam connecting the wings. The weight shift was achieved by the pilot swinging his trunk and legs. In contrast, the pilot of a modern hang glider is suspended below the glider and, with the use of an A-frame, allows the whole body to be moved around to achieve control. The Lilienthal design apparently had a tendency to pitch down and a tailplane was added to mitigate this problem. Lilienthal flew from hills in the Rhinow region and from a conical hill he built near Berlin. He made over 2000 flights. Importantly, for others seeking to progress manned flight at the time and also for the historical record, reports of Lilienthal’s flights (some with photographs) were published and Lilienthal detailed his experiences and corresponded with other flight pioneers. Lilienthal’s work became well known and influenced Orville and Wilbur Wright in their initial experiments with gliders in 1899 (although in their quest to design and fly an aeroplane they relied on new data created by wind tunnel testing). The replica built by Bruce Hearn is of the 1893 Lilienthal glider. It is very similar to the “Normal-Segalapparat” (Normal Glider) for which patent protection was later granted a few years later. The Lilienthal replica glider is an important addition to the AGM collection as it represents the beginning of successful gliding flight. Hang glider made of wood with wire bracing – yet to be covered with authentic cotton fabric. The glider has a small plate with identification details including name of builder (Bruce Hearn) glider, hang glider, lilienthal, hearn, replica -
Australian Gliding Museum
Machine - Glider – Sailplane, 2015
The Salamandra is a Polish glider designed by Waclaw Czerwinski at the Military Glider Workshops in Krakow in 1936. This glider, designated “W.W.S.1”, was produced in substantial numbers prior to the second world war and used in Poland and some other eastern European countries for training pilots. Only one example survived the war, hidden away in the village of Goleszow in Silesia. In addition, no technical drawings could be found, so when the glider was discovered, the Gliding Institute being keen to re-establish gliding in Poland, used the glider to draw up new plans for construction. Five were built for the Institute in 1947 before production was resumed of the “Salamandra 48” at the SZD Jezow Workshops. Improvement were made by adding airbrakes and structural changes for the “Salamandra 49” and a windscreen and larger tailplane were changes adopted for the “Salamandra 53”. An export version designated “53A” was sold to and built under licence in China. Production of the Salamandra ceased in the early 1960s. Total production may have been in excess of 500. The glider was well regarded as a light weight trainer capable of soaring performance. The Museum’s replica was built by Ray Ash and may be may be classified as a “Salamandra 53”. However, he has added something of his own to the design by replacing the cable runs in the wings with control rods. The glider is substantially complete. The wings and tail / rudder surfaces have been covered with poly-fibre fabric. The fuselage woodwork is sealed with varnish. In addition to the finishing work (including painting) and rigging of the main components, the linkages for Ray’s control rod modification may need further engineering to make them operational. The Ray Ash Salamandra is the first of the type to appear in Australia. The Salamandra did not play any role in the development of gliding in Australia in the early years. However, it is an important exhibit in that it shows in tangible form a nacelle fuselage training glider in configuration and construction detail. As such it revisits the pioneering era of the 1930s and 1940s in Australia when wood, wire and fabric were the rule and the nacelle primary glider was generally the first step up for pilots who had mastered the basics in an open primary.Nacelled solo training glider of traditional wood and fabric construction. Construction incomplete.Noneaustralian gliding, sailplane, glider, salamandra, czerwinshi, poland, ash -
Australian Gliding Museum
Machine - Glider - Sailplane, 1937
The Golden Eagle is an original design by Geoff Richardson. Geoff commenced gliding in the early days of the sport circa 1933 in Melbourne, flying at Coode Island and Mt Frazer. In 1934, he began construction of a secondary type glider but scrapped it upon realizing that a better design was needed. He conducted further research and came up with a sailplane of similar size and general arrangement to the Grunau Baby but with a “Gull” wing using a Gottingen 535 wing section (the same as for the Grunau Baby). Geoff did all the technical calculations himself and even made up and tested a Casein glue for the construction. Geoff competed construction of his new sailplane (which he called the “Golden Eagle”) in 1937 and it was test flown at Laverton at the western edge of Melbourne in September 1937. On the same day, at Laverton, the Gliding Club of Victoria flew its new Grunau Baby 2 sailplane which it had imported as a finished machine from Edmund Schneider in Germany. The Golden Eagle was found to fly well, having a similar performance to the Grunau Baby. In the 1950s, the Golden Eagle was modified by rebuilding the front of the fuselage to enclose the cockpit with a Perspex canopy. A landing wheel was incorporated behind the skid. Spoilers were added to the wings and a trim tab to the elevators. The Golden Eagle has been flown with the VMFG (Victorian Motorless Flight Group) for most of its long life. When donated to the Australian Gliding Museum in 2016 by Alan Patching it was probably the oldest, continuously airworthy glider in the world. Having regard to the historical significance of the Golden Eagle, the Museum has decided to not to fly it anymore to avoid risk of loss or damage. The exhibit is of great significance for Australian gliding history – the Golden Eagle is a flyable 1930s aircraft in excellent condition that was designed and built by an Australian gliding pioneer. Single seat wood and fabric sailplane finished with white wings, tailplane and rudder and yellow fuselage Registration letters “FC” on fuselage nose port side, Australian flag, Vintage Gliders Australia and VMFG decals on rudder, “Golden Eagle” lettering in red on each side of the fuselage below the canopy, Aboriginal flag decal on port side of fuselage below the canopy. australian gliding, glider, sailplane, golden eagle, richardson, patching, vmfg, victorian motorless flight group -
Charlton Golden Grains Museum Inc
Pipe Stand, Early 20th Century
This pipe stand has social significance to the township of Charlton as it was owned by Mr A. E. Bilton, the local chemist. It is well provenanced as it was donated by his daughter, Miss V. Bilton.Silver stand to hold 8 pipes and pipe cleaner, 2 velvet lined leather pipe cases (to be found), 1 briarwood pipe with silver trim (to be found)8 5 8 4 8 R (as photographed) -
Snuff Puppets
Drawing, Concept Drawing for the production of 'Forest in the Night' 1995, 1995
This drawing was done by Andy Freer, founding member and Artistic Director of Snuff Puppets. It forms part of the creative process to develop a new show, 'Forest in the Night', exploring themes of evolution, chaos theory, Darwinism and the survival of the fittest. More than 25 puppets were created and transformed into new strange creatures. This drawing was submitted as part of a pitch to the 1995 Melbourne International Festival of the Arts program, where it was performed as a large outdoor spectacle in the round. Please visit http://www.snuffpuppets.com/shows/Forest_in_the_Night for more information.The significance of this drawing is that it is a rare, original demonstration of the creative development processes of Snuff Puppets' unique puppet creation and building.A black ink drawing on A5 paper detailing the creative concepts for puppet design and development for a new production entitled 'Forest in the Night'art, environment, ink drawing, snuff puppets, puppetry, theatre, creative, puppet, performance, imaginery -
St James Old Cathedral
Cathedral Building, St James Old Cathedral, 09/11/1839
St James Church, "Church of the Pioneers", was the first Church, first Anglican Church, and is the oldest building in Melbourne. The foundation stone was laid in 1839 by the Superintendent of the District of Bourke, Charles La Trobe, later Governor of the Colony of Victoria. The Church was opened in 1842 and the first Bishop Charles Perry was installed in the Cathedral in 1848 when its status changed to that of Cathedral. Its status changed back to that of a Parish church after 1891 when St Paul's Cathedral in Swanston Street was opened. St James is known as the "Church of the Pioneers" as it served as the place of worship, marriage, baptism and burial of many of the first families in the District of Bourke and the Colony of Victoria. St James Old Cathedral is of the most important historic value to the community of Victoria and to the Australian nation as the first Anglican Church founded within 4 years of the settlement of Melbourne. It represents and conserves the very earliest history of white settlement in Victoria and preserves the church associated history of the Pioneer families of Victoria in its collection of original records and artefacts. Late Neo-Georgian style stone church building with bluestone footings. Octagonal upper one storey bell tower housing eight bells supported by two storey square towers. Body of church has sloping roof and 4 stained glass ornamental windows on each of west and east sides with decorative sanctuary window to the north. Decorative Portico with columns on the north outside elevation. National Trust Commemorative plate on outside wall to right of east entry door. -
Essendon Football Club
Essendon Football Club membership ticket
This 1880 membership ticket is the earliest membership ticket held by the club. It is signed by Alex McCracken, one of the club's founding fathers and the secretary and treasurer of the club in 1880. The inside includes fixtures of both the 'first 20' and 'second 20'.It is the earliest membership ticket held by the club.Inside paper is damaged but remains of Alex McCracken's signature are still visible. -
Essendon Football Club
Essendon Football Club membership ticket, 1972
Essendon celebrated 1972 as its centenary year although the exact date of the club's founding is not certain. It played its first recorded game against a Carlton second twenty on 7 June 1873 (and won).Folded cardboard Essendon Football Club membership ticket; ticket has black and red border with Essendon logo at top with "100 years" in gold box between flags, "Essendon / Football Club / Centenary / 1972" in black and red print with "Essendon" and "Centenary" in a stylised scroll; "Suaviter in modo, fortitier in re" in small black print at bottom. Inside has details of Club and office bearers and Essendon's fixture for 1972. -
Ithacan Historical Society
Photograph, Town Hall Cafe, 1904
The Town Hall Cafe was opened by A.J. Lucas in 1894 in Swanston Street on the Capitol Theatre site. Lucas later opened the exclusive Paris Cafe on Collins Street (1904) and the famous Cafe Australia (1916) which was designed by Walter Burleigh Griffin. He became a highly successful businessman and was the founding president of the Ithacan Philanthropic Society. A.J. Lucas who was born in the village of Exoghi migrated to Australia from Ithaca in 1886.In 1920 Lucas formed a joint venture to redevelop the site of the Town Hall Cafe into Capitol House and Capitol Theatre. Lucas once again commissioned Walter Burley Griffin and wife Marion Mahony Griffin as architects for the project. The Chicago-Gothic-style theatre is considered their greatest interior design work. The Capitol was the first extravagant ‘picture palace’ to be built in Victoria. It originally seated over 2137 people. Renowned Australian architect Robyn Boyd described The Capitol as "The best cinema that was ever built or ever likely to be built.” Information about the refurbished Capitol http://thecapitol.tv/about/A sepia photograph of the exterior of a three storey Victorian style building including veranda. It was a cafe owned by A.J. Lucas. The words 'Lucas Town Hall Cafe' are formed in raised lettering across the top storey of the building. Two cars are parked in front of the building. -
Ithacan Historical Society
Photograph, Russell Collins Restaurant, 26 April 1973
The Russell Collins Restaurant was located in the basement of the T&G Building on the south west corner of the Collins and Russell Streets intersection. It was a popular 'up-market' restaurant from the 1940s until the early 1970s when the T&G building underwent alterations. The restaurant, like its counterpart Elizabeth Collins, was renowned for its large platters of delicious salads. Nick (Naki) Raftopoulos operated the Russell Collins during the early 70s up until its closure.A black and white photograph of the interior of an Art Deco style restaurant fitted out around the walls with wooden 'shoulder high' cubicles which seated four people. Tables and chairs with various settings are arranged in the open areas of the restaurant. The floor is a wooden herringbone parquetry with a carpet on the floor in the reception area. Handwritten across the bottom of the photo: RUSSELL COLLINS RESTAURANT NICK RAFTOPOULOS.art deco, russell collins restaurant, restuarants -
Ithacan Historical Society
Photograph, View of Exoghi and Afales Bay - Ithaca, c1970s
At an altitude of 340m, the picturesque village of Exogh in northern Ithaca, lies on the Homeric mountain of Neion. The village overlooks Aphales Bay and across the water the neighbouring island of Lefkada. During the Middle Ages and at the beginning of the Venetian rule, it was one of the most populated villages of the island, offering safety from the pirates, and an excellent view of the channel, the sea and the bays around the northern Ithaca.Some of the earliest Ithacan settlers in Melbourne were from the mountain village of Exoghi, including the founding president AJ.J. Lekatsas (Lucas). The village now has very few permanent residents with most having migrated or moved to the cities of Greece. A coloured photograph of a view overlooking the village of Exoghi and Aphales Bay on the island of Ithaca. The photograph was taken from the bell tower of the church of Panagias (the Virgin/Our Lady) sta Pernarakia located at the top of the mountain. The mountains which are visible across the skyline are the neighbouring island of Lefkada. mountain villages, ithaca -
Ithacan Historical Society
Photograph, Ithacan family gathering, 1926
The photograph features many prominent members of the Ithacan Philanthropic Society during the early 1920s a number of whom were founding members of the Society, including A. J. Lucas (Lekatsas) the founding president and Angelos Lekatsas (Lucas) who was the second president. Archimandrite Irineos Kassimatis is pictured with the group. Most of the group are wearing a buttonhole pin on their jacket lapels which indicates the photo was taken at gathering to celebrate a baptism. It was traditional that following the baptismal service a small icon or cross was pinned on each of the guests to symbolise they were witnesses to the baptism. This pin is called a 'martiriki' derived from the Greek word 'martiras', which translated means a witness. A black and white photograph of eighteen men gathered together in a garden and posing in front of a weatherboard building. Three of the men are sitting on the ground in front of the group. Hand written signature - ? Varvarigos - written in Greek in the bottom left hand corner. Written on the back: STRONG MEN OF THE ITHACAN COMMUNITY -
Ithacan Historical Society
Photograph, Ithaca's Philharmonic Orchestra, C1951
The local 'philharmonic orchestra/band' playing at a civic/national day function in the 1950s in Vathi, Ithaca. Music plays an important role in many aspects of life, both civic and social, on the island. During the summer months locals and tourists enjoy a variety of musical and cultural events.Founded in 1904, the Ithaki Philharmonic Orchestra is the oldest musical group on the island. The band is a private, non-profit entity and its goal is to offer free musical training to the young of the region and provide them with a broader musical education. The philharmonic orchestra performs concerts and participates in a range of educational, municipal, religious and national day events. A black & white photograph of a brass band of men dressed in dark uniforms and flat hats and women wearing dark skirts and white blouses. In the second row are males in civilian suits. The conductor is standing in the front on the extreme right hand side holding a baton. -
Ithacan Historical Society
Photograph, Ithacan picnic group, 1935
The photograph was taken at an Ithacan picnic held at Mentone Racecourse in 1935. Members of the IPS Committee are pictured with their families together with two official guests, Father Theophylaktos Papathanasopoulos from the Melbourne Orthodox Parish, and Father Timotheos Evangelimides, the Archbishop of the Greek Church in Australia, both pictured standing in the centre of the group. Vicki Raftopoulos(Black) is seated 3rd from the left and Arthur Raftopoulos is standing 3rd from right and Stathi Trohoulas is standing far right. Melbourne's first Greek Orthodox Church 'Evangelismos' in Victoria Parade East Melbourne was consecrated in 1901. Ithacans, as members of the Greek Orthodox Community, were directly involved in its establishment. A.J.Lucas the founding president of the Ithacan Philanthropic Society was one of a number of prominent Greeks who advanced funds to help with the purchase of the East Melbourne site upon which the church was built. The building of the church was financed through the contributions of funds from the local Greek community.A black and white photograph mounted on grey board of a picnic group sitting and standing around a table set out with food and drinks under trees. A bus is parked and just visible behind the group. Detail of the people in the photograph and other information is written in Greek on the back of the pghotograph. -
Ithacan Historical Society
Photograph, Papadopoulos brothers, 1916
Pictured are brothers, on the left, Yiannis (Soufis) and on the right Anastasios (Stravolemis) Papadopoulos. Unknown man in centre. Anastasios migrated to Western Australia from Ithaca in 1912 and Yiannis (John) followed in 1913. They found work in Kalgoorlie where they experienced the race riots of 1916. In that same year they left W.A. and hitchhiked across the Nullarbor travelling by camel train, van and on foot to reach Melbourne where they both settled. John operated a fruit business in South Melbourne; Anastasios a fish and chips shop in Chapel Street South Yarra.A studio sepia photograph of an old torn photograph of two young men with an older man.pappas -
The Ed Muirhead Physics Museum
Gas X-ray Tube
The investigation of the x-ray appears early on to have been a priority research topic at the University of Melbourne’s School of Physics. This interest was sparked by the appointment in 1889 of Professor T.R. Lyle. Lyle, who was head of the school until 1915, is thought to have been the first person in Australia to have taken an x-ray photograph. A copy of this photograph can be found in the School of Physics Archive. For this particular experiment Lyle actually made his own x-ray tube. His successor, Professor Laby, continued to work with x-rays. During the 1920s Laby worked on the x-ray spectra of atoms and in 1930 he co-published with Dr. C.E. Eddy, Quantitative Analysis by X-Ray Spectroscopy. Also with Eddy, Laby produced the landmark paper Sensitivity of Atomic Analysis by X-rays. Laby went on to have an x-ray spectrograph of his own design manufactured by Adam Hilger Ltd. (see cat. No. 38). School of Physics, the University of Melbourne Cat. No. 22. Jacqueline Eager Student Projects Placement, Cultural Collections 2005 The original X-ray tubes relied on low pressure operation. The electrons and positive ions are produced in the residual gas. Positive ions are accelerated towards the cathode and release electrons which on hitting the anode produce X-rays. These early gas X-ray tubes operated satisfactory only over a narrow pressure range. Stamped Label: “NATURAL PHILOSOPHY LABORATORY/ No/ UNIVERSITY OF MELBOURNE” Stamped: “90268 M. No. 5171[??]/No. 2156[??]/ M. No. 346585.” x-ray tubes, gas x-ray tube, laby, spectroscopy -
The Ed Muirhead Physics Museum
Gas X-ray Tube, Victor
The investigation of the x-ray appears early on to have been a priority research topic at the University of Melbourne’s School of Physics. This interest was sparked by the appointment in 1889 of Professor T.R. Lyle. Lyle, who was head of the school until 1915, is thought to have been the first person in Australia to have taken an x-ray photograph. A copy of this photograph can be found in the School of Physics Archive. For this particular experiment Lyle actually made his own x-ray tube. His successor, Professor Laby, continued to work with x-rays. During the 1920s Laby worked on the x-ray spectra of atoms and in 1930 he co-published with Dr. C.E. Eddy, Quantitative Analysis by X-Ray Spectroscopy. Also with Eddy, Laby produced the landmark paper Sensitivity of Atomic Analysis by X-rays. Laby went on to have an x-ray spectrograph of his own design manufactured by Adam Hilger Ltd. (see cat. No. 38). School of Physics, the University of Melbourne Cat. No. 22. Jacqueline Eager Student Projects Placement, Cultural Collections 2005 The original X-ray tubes relied on low pressure operation. The electrons and positive ions are produced in the residual gas. Positive ions are accelerated towards the cathode and release electrons which on hitting the anode produce X-rays. These early gas X-ray tubes operated satisfactory only over a narrow pressure range. Manufacturer’s mark stamped: “PATENTED/ VICTOR/ TRADEMARK/ MADE IN BOSTON U.S.A./ TUNGSTEN” A white circular stamp, stamped near the manufacturer’s mark: “[illegible]TER WIGGH[illegible]” Stamped label: “NAT. PHIL. LAB./ No./ UNIV. OF MELB.” Inscription on the end face of the copper piece: “PAT. SEP 5’ 11 DEC. 30’13/ JUNE 23, 14 NOV. 30.15/ 43835” -
The Ed Muirhead Physics Museum
Rotating Anode X-ray Tube
The investigation of the x-ray appears early on to have been a priority research topic at the University of Melbourne’s School of Physics. This interest was sparked by the appointment in 1889 of Professor T.R. Lyle. Lyle, who was head of the school until 1915, is thought to have been the first person in Australia to have taken an x-ray photograph. A copy of this photograph can be found in the School of Physics Archive. For this particular experiment Lyle actually made his own x-ray tube. His successor, Professor Laby, continued to work with x-rays. During the 1920s Laby worked on the x-ray spectra of atoms and in 1930 he co-published with Dr. C.E. Eddy, Quantitative Analysis by X-Ray Spectroscopy. Also with Eddy, Laby produced the landmark paper Sensitivity of Atomic Analysis by X-rays. Laby went on to have an x-ray spectrograph of his own design manufactured by Adam Hilger Ltd. (see cat. No. 38). School of Physics, the University of Melbourne Cat. No. 22. Jacqueline Eager Student Projects Placement, Cultural Collections 2005 A modern X-ray tube differs little from the original Coolidge tube. A minor modification is the rotating anode type that extends the life and increases the available power of the tube by presenting a new portion of the anode when required. “P125/20/40/NrF038803 (?) SIEMENS-REINIGER-WERRE AG ERLANGEN Eigen filleung (?) mind. 0,7 mm AL” On rotating shaft: “FO/33803” On cathode: “23C” -
Port Melbourne Historical & Preservation Society
Functional object - Brick, former Well at Temperance Hall, Port Melbourne
... Melbourne Town Hall 333 Bay Street Port Melbourne melbourne Found ...Found when renovations were being made by PMCC in 1990 (well was located under new toilets)Brick obtained from site of former well that existed at Temperance Hall, corner Nott and Farrell Streetbuilt environment - civic -
Port Melbourne Historical & Preservation Society
Functional object - Brick, former Well at Temperance Hall, Port Melbourne
... Melbourne Town Hall 333 Bay Street Port Melbourne melbourne Found ...Found when renovations were being made by PMCC in 1990 (well was located under new toilets)Brick obtained from site of former well that existed at Temperance Hall, corner Nott and Farrell Streetbuilt environment - civic -
Port Melbourne Historical & Preservation Society
Functional object - Brick, former Well at Temperance Hall, Port Melbourne
... Melbourne Town Hall 333 Bay Street Port Melbourne melbourne Found ...Found when renovations were being made by PMCC in 1990 (well was located under new toilets)Brick obtained from site of former well that existed at Temperance Hall, corner Nott and Farrell Streetbuilt environment - civic -
Port Melbourne Historical & Preservation Society
Functional object - Brick, former Well at Temperance Hall, Port Melbourne
... Melbourne Town Hall 333 Bay Street Port Melbourne melbourne Found ...Found when renovations were being made by PMCC in 1990 (well was located under new toilets)Brick obtained from site of former well that existed at Temperance Hall, corner Nott and Farrell Streetbuilt environment - civic -
Port Melbourne Historical & Preservation Society
Ceremonial object - Partial foundation stone (two pieces), Temperance Hall, Port Melbourne, 24 May 1890
Obtained from grounds of former Temperance Hall, Nott and Liardet Streets. Found when renovations/extensions were being made by PMCC in 1990. The stone was laid on 24 May 1890 by James Munro MLA who was a leading temperance advocate.Two pieces of commemorative stone which was originally in wall of Temperance Hall.' This s.... was laid by ...... the Honora... James Munr... ...... May 24th ........'james munro, built environment - civic, port melbourne temperance hall -
Port Melbourne Historical & Preservation Society
Document - Notice, Electoral enrolment of Ratepayers, Town of Port Melbourne, Jun 1903
Poster-sized enrolment notice issued to Ratepayers 1.7.1903 by Town Clerk E.C. Crockford, found folded into Council rough minutes (ref item 345); torn on edgeslocal government - town of port melbourne, edward c crockford, town clerks -
Port Melbourne Historical & Preservation Society
Document, Borough of Port Melbourne Standing Orders Bye-law No 61, c. 1890
... Melbourne Town Hall 333 Bay Street Port Melbourne melbourne Found ...Found loose in item 345, rough Council minute of 1901-044 page foolscap printed copy of By-law to the Local Govt Act 1890: 'Borough of Port Melbourne Standing Orders Bye-law No 61'Intricate doodling in black ink in margins of page 1:Assumed signature of Cr Michael Quinn on page 4local government - town of port melbourne, michael tarver quinn