Iron boot/shoe scraper. Base forms a diamond-like shape with vertical stem and shoe shaped flat top.No visible markings.cleaning, iron, boot, mud, shoe, scrapper.

Used to mark butter in the boxes from the Port Fairy Butter FactoryPossibly the only butter box marker left from the Port Fairy Butter FactoryTubular embossed "Bonnie Port Western district Choicest" wooden marker. Shaped like a rolling pin. One handleBonnie Port Western district Choicestlocal history, rural industry, butter making, port fairy butter factory

The seven weights (0008.4 and 0136.3) are circular in shape with a hole in the centre and a groove cut across the radius. They were specifically designed to fit into a weight tube, which allowed movement of the weights that were used for driving the clockwork mechanism for turning the lighthouse lens. They are most likely original to the Chance Brothers system installed in 1913, which was originally equipped with a set of ten, each weighing around thirty kilograms.The weights were moved vertically in similar fashion to the way weights move on a grandfather clock. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. Lighthouse keepers had to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, weights became obsolete and the motors were able to turn the optic for as long as there was power to drive them. Wilsons Promontory’s Chance Bros. kerosene operated light, which was turned by a clockwork mechanism, was replaced by small electric motor in 1975, reducing the number of keepers and eliminating the need for weights. Cape Schanck has a set of fourteen weights remaining in situ in the lighthouse weight tube as well as another four detached weights, two of which may be associated with the 1859 mechanism. A small number of detached cast iron weights and two associated rods remain at the Point Hicks Lightstation and one weight is displayed in the lantern room at Cape Otway.The Wilson Promontory weights have first level contributory significance for the insights they provide into the technology and operations of a late nineteenth/early twentieth century lighthouse which has since been superseded. They are well provenanced and are significant for their historical value as part of the lightstation’s Chance Brothers optical system installed in 1913.Four circular disc shaped lead weights, all with a narrow section cut out to the middle of shape. (as in slice of cake)

The rectangular weight is rectangular in shape and made of concrete and metal. A closed metal hook is attached to the concrete block, which is encased in metal, and a section of rope is attached. It was used as a counter weight on a canopy that operated as part of a winch located at the [east] landing deck … Originally there were four weights that formed part of a fibreglass canopy which consisted of a staunch, pulley and a rope so when you lifted the canopy up, the weights on either side countered the weight so objects could be moved. The weights were installed in the 1970s and were dismantled along with the winch in the following decade.The weight has first level contributory significance for its provenance and historical value as a component of an earlier apparatus that was used for hoisting goods at the lightstation sea landing.2 x Rectangular shaped weight with with closed hook embedded in concrete surrounded by metal. A section of rope is attached to the hook.

Used by Principal of Wandin East Primary School. Donated by teacher, Mrs. Margot Capuano.Wooden 'bell' shaped chair with armrests, and 9 pies of turned wood in the upper part. Seat is made of particle board.

Essendon shooting cupHistoricalSilver trophy shaped as a standard trophy with two handles and the main area has been engraved with a flower like pattern58 - 32. BN. H.Q. COY COMD. Trophy 1953 LT F.W. Hill Sig Pl 1954 SGT D.W Gray Tpt Pl 1955 L.TRBLANGDON Tpt Pl5/6 rvr, 5/6 rvr pipes and drums, command trophy

Shield shaped plaque made of varnished timber with a large RAR badge with its unit citation affixed to its front. rainf, rar, infantry, plaque

Shield shaped plaque made of varnished timber with a large RAR badge affixed to its front. The rifle is in red colourrainf, infantry, plaque

Used by horse rider for control of horse and safe movements of horseManufactured and retailed by Holden and Frost Ca 1900Horse shoe shaped metal with a flat base to support foot of rider. Base is flat with hollow spaces. Painted blackstirrup, equine

Used to maintain and dress saddleryImported and distributed by Holden and FrostSquare shaped glass jar with brown coloured label affixed that has contents printed on. Cork stopper in bottle neck.Frank Millers (Crown logo) crown dressing New York U.S.A.bottle, equine, dressing

This item is part of the Dodgson Collection, which was bequeathed to Queen's College in 1892 by the Rev. James Dodgson. The collection was created by Aquila Dodgson, brother of James. Aquila Dodgson was a friend of the English Egyptologist Flinders Petrie, and it was through this friendship the Aquila was able to acquire ancient Egyptian artefacts. A detailed study of the collection was made by Christine Elias "Discovering Egypt: Egyptian Antiquities at the University of Melbourne", M.A. thesis 2010.Very roughly shaped piece of wood with suggestion of fingers at one end. Two circular holes along length for attachment. Small paper label inscribed with 'B3' attached to back of arm.arm, wooden figure, james dodgson, aquila dodgson, flinders petrie

Commonwealth government issue. This nest of tables are currently in use by the lighthouse staff.The set of three tables of descending size are designed in the same distinctive style as the bookcases and share the same wood type and finish (GILS 0012.2). Information on the underside of the tables indicates they were purchased by the Commonwealth through the Department of Transport for the CLS. The design bears the stylistic marks of the easily recognisable furnishings produced by the Kalmar firm, Sydney. Steven Kalmar (1909-1989), who migrated to Australia in 1939 and opened his own interiors business in 1949, played a significant role in popularising modernist design concepts in Australia drawing his ideas from Scandinavian and American trends. Born in Hungary, he trained as an architect and his contemporary affordable furnishings were especially suitable for the open-plan houses built in Australia’s new post-war suburbs. He closed the retail side of this in 1957 and concentrated on commissions, some for large-scale orders. One of these bulk orders came from the Commonwealth Government sometime between 1957 and the early 1970s, with several examples of light, compact and functional domestic furnishings supplied to lightstations in Victoria. Because the order was placed by the CLS, it is possible that Kalmar furnishings were also provided to lightstations in other states. Additional examples at Gabo Island include three bedside tables (GILS 0042.2 & 0076.10), chest of drawers (GILS 0077) and two bookcases (GILS 0012.2), with the backs of at least two of the furnishings bearing the Kalmar label. Kalmar furnishings in the other Victorian lightstations investigated by this study include bookcases at Cape Otway, Cape Nelson (3 examples) and Point Hicks (2 examples); two bedside tables at Cape Otway, and a long coffee table at Wilsons Promontory. The set of tables has first level contributory significance for their clear provenance, completeness and association with Steven Kalmar whose functional designs introduced modern, low cost furnishings to a number of Australia’s lightstations.Nest of three Scandinavian style tables, solid wood. Curved U shaped legs, one bar at base of table.Underside of GILS007.3:"C of A / D.O.T 1444248" (Commonwealth of Australia, Department of Transport.) •All tables have "16" on underside.

Doilies are small ornamental mats, as of cotton, embroidery, lace, paper or plastic, often placed under cakes, sandwiches etc, on a plate. They were also used as a protection for ornaments placed on furniture to protect it from scratches.Large white cotton oval shaped doiley, with stitched edging. Applique flower cut outs.It has embroidered leaves.doileys, furniture accessories, table linen, soft furnishings

Partial manufacturer's stamp on side near base not yet identified reads 'Port... das OLASO... Pottery'. Further research needed.Pale coloured, bottle shaped ceramic jar with no stopper. Has a partial but illegible maker's mark. Further identification required.'Port... das OLASO... Pottery'.pottery, containers, jars, ceramics

Salmon-coloured, shield-shaped ticket. Ticket is for the Old Lintonians' Association 34th reunion, held March 27th, 1948.Text: " Old Lintonians' Association / 34th REUNION / MARCH, 27th, 1948 / Member's Ticket. "old lintonians association, reunions, tickets

This small flag has been made by Brauer College in Warrnambool to celebrate the 150th anniversary of the founding of Warrnambool and to mark the 84 years of Brauer College’s existence. Warrnambool was founded in 1847 as a planned town to provide port facilities for the export of produce of the local pastoralists and squatters. Brauer College began as the Warrnambool Technical School in 1913 with John King as the Principal and the original school buildings in Timor Street. In 1958 the school became the Warrnambool Technical College and today this site is occupied by the South West TAFE facility. The secondary school section of Warrnambool Technical College relocated to Caramut Road in Warrnambool and since 1990 has been known as Brauer College. It was named after a local prominent doctor and supporter of State Education – Dr Alfred Brauer. This flag is of some interest as a memento of Warrnambool’s 150th anniversary and of Brauer College’s part in this. This is a rectangular-shaped plastic flag attached with three metal staples to a circular-shaped wooden stick. The flag is green with white printing on both sides and contains the images of the Warrnambool City Council seal and the sea-horse emblem of Brauer College. The flag is partly torn away from the stick at the lower end. ‘Warrnambool -150 years 1847-1997’ ‘Brauer – 84 years 1913-1997’ brauer college, warrnambool, warrnambool’s 150th anniversary

St. John’s Bowls Club was formed in 1926 as a sporting adjunct to the activities of St. Johns Presbyterian Church in Warrnambool. In 1956 the club moved to Princess Street in the church grounds. It closed in 2012, the closure caused by dwindling membership and the site being designated by the Presbyterian Church for other purposes. This hat band is of interest as a memento of St. John’s Bowls Club in Warrnambool. This club no longer exists.This is a navy cloth hat band – a strip of material stitched at one end to shorten it and shaped with a ‘V’ at the other end . There is a gold metal clip at the ‘V’ shaped end to join the material to make a continuous circle and to attach the band to the brim of a hat. The name is stitched in white into a piece of white material and attached to the band.‘St. John’s Warrnambool’ st. john’s presbyterian church, warrnambool, history of warrnambool, st. john’s bowls club, warrnambool

White crochet cotton, filigree crochet milk jug cover. The word "MILK" is worked into the centre of the design, with a milk-jug worked above and below the word. The cover is star shaped, with three yellow glass beads attached at each of the eight points. A diamond shaped pattern is worked into each of the eight points.Made by Merle's Grandmother-- Geuerdomestic equipment, food storage & preservation, milk jug cover

Used by women and girls to wave or crimp their hair, for styling their hair, hairdressing. The irons are heated and then applied to the hair and wound to form curls. Pre-dates electrically heated curlers.One set of curling tongs made of iron/steel, rusted. The tongs are two shaped metal pieces which clamp together over a tress of hair. One set of crimping tongs. These have two wavy iron shaped metal pieces which clamp over a tress of hair to produce crimpy waves.hair-crimpers-curlers hairdressing heated-curlers

Legacy is an Australian organisation which was founded in 1923 to assist the widows of servicemen who had not returned from active service in World War One. It now assists widows, widowers and their children whose parent died whilst serving during any conflict or subsequently. These badges are an interesting memento of the means used by the organisation of Legacy to raise funds to assist widows, widowers and children of deceased service men and women.1 silver coloured metal inverted tear drop shaped badge featuring a torch with red flame and a blue scroll with text. There is a pin on the reverse. .2,.3,.4, .5 silver coloured metal "figure eight" shaped badge featuring a torch with red flame and a blue scroll with text. There is a pin on the reverse..1 , .2, .3, .4, .5 LEGACY

Made by internee at Camp 3,TaturaHandmade wooden wall plaque with two 'pin' holes at the top for hanging. Adhered to plaque : Handcarved shaped heart painted red in centre, shaped 'banner' with 2 words written on it in German, translating as "love me" at top. painted on base either sideof heart is a blue flower with yellow centre and green leaves.Wied Gplaque, wood, bissinger g, wied k and n, camp 3, tatura, ww2, handcrafts, woodcarving

Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This is an example of an implement used locally in the livestock industry.A branding iron with letter R on circular end. Handle loop is oval shaped. It has been painted blue to half way.branding-iron rural-industry

Pattern-Stern gland round wood object with diamond shaped piece of wood at centre and hat type top with hole inside. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pattern-stern, stern, stem pattern

Bevel gauge for a bench saw - large metal semi circular attached to a straight wood handle. Device shaped like a protractor flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village