Series of A4 copy photos given to the collection by Judy Faram, Illustrating the evolution of the 1856 building (see also #1516, 1522). The prints have been marked with dates. .06 - Faram Bros extension, glazed but pre verandah approx 1928In ink, various information dates etc on surface of prints.business and traders - hardware, built environment - commercial, george faram, thomas faram, richard faram, faram brothers hardware, allen faram

Taken by Gary Spivak, an officer of the City of Port Phillip involved with the reconstruction of heritage buildings to create low cost housing. This project was under his direction.B&W photos of Excelsior Hall 2003, prior to redevelopment into units .03 - Window in extensionbuilt environment - civic, town planning, heritage, excelsior hall, rsl, returned services league

The State Savings Bank of Victoria transformed an area of Fisherman's Bend by creating Garden City. This 1927 pamphlet described the area and outlined the loan conditions. A small range of building designs had been developed based on designs used in England and Scotland for workmen's homes.1927 pamphlet issued by the State Savings Bank of Victoriabuilt environment - domestic, garden city, state savings bank of victoria

Two photographs (155 and 172). 155, Brick Church in a rural setting, sign at the front reads: Bible Christian Chapel AD, 1869. 172, Double storey stone building in a bush setting. The front section has a gable roof, there is a single storey extension at the rear with a skillion roof. There is a small wooden structure at the left hand side of the buildingbuildings, church, bible christion chapel, bible christian chapel, stone building

B&W Photograph of a shearing shed, with a wooden extension, there are sheep yards off to the side of the extension. There is a weather vane attached to the gable, there are trees in the background. Another shed with a weather vane can be seen behind the trees. A ramp extends upwards from a door in the end of the shed. The words 'East Loddon Shire' are written at the bottom of the Photoplace, building, shearing shed, east loddon shire, shearing shed

Slide. Bendigo Buildings & Churches. Scaffolding on the church for the Extensions.slide, bendigo, bendigo buildings & churches., bendigo buildings & churches.

With the consolidation of Galen Catholic College onto the one campus in 1990, the 1990s were a period of intense development of buildings and other infrastructure on the Phillipson Street site. In 1993 and 1994, the existing library was greatly extended. galen catholic college, galen college, library, school grounds & buildings, galen library

The intense development of buildings and other infrastructure of the 1990s at Galen Catholic College continued into the 2000s. In 2000, new Art & Technology wings were added to the main building.galen catholic college, galen college, art, art classrooms, technology, technology classrooms, demolition, development

During the 2010s, there was a significant redevelopment of the facilities at Galen Catholic College. In 2014, The Food Technology kitchen was redeveloped and the Soul Food Cafe was built as an extension to this kitchen. This series of photos shows the construction and completion stages.galen catholic college, galen college, soul food cafe, kitchen, food technology, 2014, school grounds & buildings

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

St. Andrew's Uniting Church, formerly the Presbyterian church includes two different church buildings as well as a new addition built at the rear of the 1904 red brick building. A small weather board structure was used as a church until the Romanesque brick building opened in 1904. The new church extensions were completed on 14 December, 1986.A rear view of St. Andrew's Uniting Church before the extensions were built. The photograph shows the small apse and porch as well as the surrounding conifers which were growing in the church grounds.churches, religion, tompkins, f. b., h. w., goyen, w. rev., st. andrew's uniting church, presbyterian church, george evans collection

St. Andrew's Uniting Church, formerly the Presbyterian church includes two different church buildings as well as a new addition built at the rear of the 1904 red brick building. A small weather board structure was used as a church until the Romanesque brick building opened in 1904. The new church extensions were completed on 14 December, 1986.A view of the front of St. Andrew's Uniting Church and stone fence with the surrounding trees and cars parked in the front of the church.churches, religion, tompkins, f. b., h. w., goyen, w. rev., st. andrew's uniting church, presbyterian church, george evans collection

St. Andrew's Uniting Church, formerly the Presbyterian church includes two different church buildings as well as a new addition built at the rear of the 1904 red brick building. A small weather board structure was used as a church until the Romanesque brick building opened in 1904. The new church extensions were completed on 14 December, 1986.A coloured photograph of St. Andrew's Uniting Church after the rear extensions. The new porch and hall and part of the new church extensions are visible on the LHS of the photograph.churches, religion, tompkins, f. b., h. w., goyen, w. rev., st. andrew's uniting church, presbyterian church, george evans collection

This building was demolished in 1975 when the extension to the existing Shire Offices were completed later in 1975.Prior to the Sunbury Waterworks Rust occupying this building, a hotel was built on this site in the 1870s and was known as Brown's Hotel. At some stage John McMahon's grandfather owned the hotel.A black and white photograph of a weatherboard house with a tin roof, verandah and paling fence was the home of the Sewerage Authority and Waterworks Trust at the front of the Shire Offices.sunbury sewerage authority, sunbury waterworks trust, shire of bulla, mcmahon, john, burgess, geyer, ronald, sewerage establishments, george evans collection, brown's hotel, john mcmahon

7130: Gunnings house prior to removal fro Constuction of Medical Centre. 7130-1: Old home in Wimmera St Remved for McCrackens used car yard. 7130-2: Dr. Andrew Cunningham looking at the constrution of the extensions to the Stawell Medical Centre. 7130-3: New Enterance to the Stawell Medical Centre. 7130-4: A Veiw of the partially completed extension to the SMC from Across the road. 7130-5: Slab Finished building under construction, town hall in background. 730-6 Brickwork and Timber truss's on new additions. 7130-6: Work Just Beginning. 7130-7- Old entrance to the SMC. 7130-8- the new additions to the SMC. 7130-9: 7130-10 & 11 1987 Extension. 7130 15 & 16 c 1980 Stawell Medical Centre Cnr Wimmera Scallan St. 71340-17: C 1985 Back entrance 7130-19 c1985 After removal of Gunnig house. 7130-20 c1985 Extension under way. 7130-21 Preparation of Foundations 7130-22 Medical Centre Extensions 7130-23 Extensions 7130-24 Foundations being dug 7130-25 Building underway 7130-26 Sue Cunningham and Meg in front of Stawell Medical CentreTwo B/W & 13 Colour Photographs in Plastic Pockets.medical

Literary Institute at Pleasant Creek, Stawell West. Showing Extensions at Rear. Verandah painted Marone and white strips. Picket fence around the building.Colour Photograph (Album 13, P82) of two story brick building at Pleasant Creek, Stawell. Literary Institute. Large Flowering bush at front. Photo also shows back room addition. Mostly likely an addition when the building was used as a cafe. Verandah painted in different stripes.August 1985stawell

Painting was found in hard rubbish collection in Myrtle Grove Blackburn and given to Simon CleggSmall water colour painting of 36 The Avenue Blackburn in a white square frame. There is a white timber fence in the foreground, with many trees green brown and yellow with a building amongst them. Painting signed E.PerepE Perep- 36 the Avenue prior to extensionhandcrafts, hand painted

1888 school opened. 1890 children attend (50ft x 20ft room. 90 children, 3 teachers)1922 land purchased on Tirana St. site. 1930 brick building built for upper grades. 1950's timber rooms added, later burnt down. 1967 Junior classes to brick extension Tirana St. 2008 2 large learning spaces built.Sepia photograph of Mitcham school (Grade 7 and 8) taken outside in front of a plant covered wall. The photograph was taken in 1937. This is a class of 37 children. Teacher on the right.mitcham state school no 2094, class photo, 1937