Brown and white coloured cardboard box with white and black manufacturer's label adhered to front with plastic tray inside box containing twelve (12) hypodermic needles.Moulded into plastic tray: B-D TWIN PAK Stamped into flat section of connector: B-D 27 Stamped in red ink on inside base of box base: 6 MAR. 1965hypodermic, needle, syringe, b-d, luer-lok, becton, dickinson, mexico

Folded paper packet containing suture needles, with original seals still in place. The packet is white with blue printed text.Stamped in blue ink on reverse: 1/2 CIRCLE / CUTTING EDGEneedle, suture, de vahl, england

Folded paper packet containing curved suture needles wrapped in foil. The packet is white with green and red printed text.Stamped in black ink on reverse: 1/2 CIRCLE / CUTTINGneedle, suture, templar quality, charles spencer, redditch, england, circle cutting

Folded paper packet containing suture needles wrapped in waxed paper. The packet is white with black printed text on front and back. A white sticker with red shield and black writing has been adhered to opening flap on the back of the packet.Stamped in black ink on reverse: CURVED / CUTTING EDGEneedle, suture, england, curved cutting edge

Congo Red Solution was used to test the purity of Avertin before use. Avertin is a rectal anaesthetic that was used heated which could created dibromacetaldehyde and hydrobomic acid, the former being highly corrosive to rectal mucosa. Once this was known it was recommended that the solution should not be heated above body temperature and should be tested with Congo Red prior to use.Brown cardboard box with pink manufacturer's label adhered to front and text printed in black. The box contains an amber coloured bottle with blue wax seal and pink manufacturer's label with black printed text. There is also a clear glass dropper.avertin, dibromacetaldehyde, hydrobomic acid, rectal anaesthesia, rectal mucosa

Robin William Smallwood was Dean of the Faculty of Anaesthetists at the Royal Australasian College of Surgeons from 1986 - 1987. Smallwood died 6 October 1987 after a brief illness. Smallwood completed medicine at the University of Melbourne in 1958 and decided on anaesthesia as a career, attaining his FFARACS in 1964. The Orton Medal was awarded posthumously.Gold coloured oval shaped medal with the Faculty of Anaesthetists coat of arms on the obverse in relief. The owner's name has been engraved into the reverse. There is a thick, ribbed, navy blue ribbon connected to the medal by a circular ring at the top. The medal and ribbon are encased in a black velvet box with white satin lining on the inside of the lid and a red velvet cushion resting in the base.Engraved on reverse of medal: R.W. SMALLWOOD / 1986 - 1987

The Robert Orton Medal is awarded at the discretion of the Council of the College (formerly the Board of the Faculty), the sole criterion being distinguished service to anaesthesia. The award was established by the Faculty of Anaesthetists, Royal Australasian College of Surgeons, in 1967. Robin William Smallwood was Dean of the Faculty of Anaesthetists at the Royal Australasian College of Surgeons from 1986 - 1987. Smallwood died 6 October 1987 after a brief illness. Smallwood completed medicine at the University of Melbourne in 1958 and decided on anaesthesia as a career, attaining his FFARACS in 1964. The Orton Medal was awarded posthumously.Die cast medal mounted in a hard blue velour base, with a wooden gold frame. The medal is placed inside the base, with a red velvet ribbon coming out from underneath, used for removing the medal. Underneath the medal is a two cent coin, stuck to the base. Where the medal rests is covered in red velvet as well.Moulded in relief around perimeter of medal: THE ROBERT ORTON AWARD R.A.C.S. •Handwritten in black ink on reverse: THE ROBERT ORTON MEDAL OF THE FACULTY / OF ANAESTHETISTS, ROYAL AUSTRALASIAN COLLEGE / OF SURGEONS, PRESENTED POSTHUMOUSLY TO / ROBIN WILLIAM SMALLWOOD AT THE R.A.C.S. / G.S.M. MAY 7 1989 •Stamped in black ink on reverse: PORT MELBOURNE PRINTS & FRAMING / 276 BAY ST., PORT MELBOURNE 3207 / TELEPHONE No 646 4000 •Etched around the rim of the medal: ROBIN WILLIAM SMALLWOOD OCTOBER 1987orton, robert, smallwood, robin, distinguished services, faculty of anaesthetists, faculty board

Robin William Smallwood completed medicine at the University of Melbourne in 1958 and decided on anaesthesia as a career, attaining his FFARACS in 1964. Smallwood was Dean of the Faculty of Anaesthetists at the Royal Australasian College of Surgeons from 1986 - 1987. Smallwood died 6 October 1987 after a brief illness and was awarded the Orton Medal posthumously. The Orton Medal is the highest single achievement the College can bestow. Anaesthesia had its origins in October 1846 in America, by May 1847 news of ether anaesthesia had reached Australian shores and by June 1847 Australian medical practitioners had begun experimenting with and demonstrating ether anaesthesia. Anaesthesia was not really recognised as a distinct branch of medicine in Australia until the first Diploma of Anaesthesia course began in Sydney in 1944. The specialty grew quickly and by 1952 the Faculty of Anaesthesia at the Royal Australasian College of Surgeons had been established. Within 40 years the Faculty had grown to such an extent it became a College in its own right and continues to offer training and professional support to anaesthetists.Printed certificate from the Faculty of Anaesthetists of the Royal Australasian College of Surgeons (RACS) awarded to Robin William Smallwood as a Fellowship. Printed in black ink at the top of the certificate is the RACS coat of arms. The certificate is dated 25 Feburary 1965 and has been signed by President of the College, Member Executive Committee, Dean of the Faculty and the Secretary.smallwood, robin william, orton, robert, faculty of anaesthetists, royal australasian college of surgeons, ffaracs, racs, fanzca

This was gifted to Robin William Smallwood on his retirement. Smallwood graduated from medicine in the mid-1950s and decided to make a career in anaesthetics, was granted Fellowship in 1965, became a member of the Board of the Faculty in 1976 and became Dean in 1986-1987. It has been made by Arnold & Sons of London who were medical instrument manufacturers and became Mayer & Meltzer.Silver tube in two pieces, which form an innner and outer tube. The inner tube is curved with a flat plate at the top and two squared hooks (handles) coming off the plate. The outer tube has been spliced, creating two separate curved sides with an oval, bowl-like plate at the end, with an oval shaped holed punched through either side. Attached to the square hook of the inner tube is a green cotton ribbon.Stamped into the bowl shaped plate: ARNOLD & SONS / SILVERsmallwood, robin, •faculty dean, faculty of anaesthetists, royal australasian college of surgeons, ffaracs, racs, fanzca

Magill laryngoscope with a battery in the handle was one of first of its kind This piece of equipment is made of stainless steel and has a canal on its left side and a handle to put batteries inside of it and it has attached a round screw to make it extendable. This object also has an stamped inscription and on the other side it has the manufacturer details. Stamped A.CHARLES KING.LTD Stamped REG.NO.749019 Stamped STAINLESSmagill, ivan, battery

Metal laryngoscope in two parts. A round hollow handle with a textured grip and a screwed in base for holding batteries. The metal blade screws in to the handle and has a moulded section for a small light bulb. Engraved in to top of blade, D.A. Engraved in to base of handle, B.T.S. / R.W.H. D.A. Stamped in top of the handle, PAT.NO.683731 Stamped in top of the handle, BRITISH [indecipherable]laryngoscope, light bulb, battery

A curved laryngoscope blade with bulb only. Its has an engraved detail about the place it belonged. Also, it has stamped on the blade the maker's seal and its material. At the base of the blade is stamped the place where it was made. The top of the blade has some scratches and the base has an oxide spot over the name of the place it was made. Engraved on the blade, Anaes. Dept. Alfred Stamped on the base of the blade, MADE IN ENGLAND Stamped on the blade left side, STAINLESS Stamped on the blade on top of the base a circular seal with the letters, BOC laryngoscope, light bulb, glass, blade, boc, british oxygen company

Curved laryngoscope blade and handle. The laryngoscope blade is identified as a MAC 3 RIESTER blade and is attached to the textured handle with a serrated grip for ease of use. The handle is also a battery deposit which has stamped on the lid base the manufacturer's name and the place where it was made.Stamped on the lid base of the handle, Penlon R [trademark] / Made in U K Printed on the blade base, MAC 3 RIESTER Printed on the blade base, STAINLESS STEEL C E / GERMANY Stamped on the blade base, TDD Stamped on the blade base, Gairway, laryngoscope, penlon, united kindom, germany, mac 3 reister, blade, the alfred hospital, melbourne, macintosh

Curved laryngoscope blade with light bulb only. Etched on the base of blade is engraved the word 'Whittam'. It has visible and deep scratches on top of its blade and back side. Also has on the edge of the blade a spot of oxidation and some green paint stains under the blade surface. Visible oxidation is present in the blade base back side over the small lamina attached by a screw. Engraved the presumably owner's name, Whittamlaryngoscope, blade, light bulb, curved laryngoscope, glass, whittam

Laryngoscope handle, with screw in connector for blade. It has a textured handle with a serrated grip for ease of use. The handle is also a battery deposit. Stamped on the base of the handle is the trade mark name details (PENLON) and the place where was made (ENGLAND). The piece has some slight scratches and surface subsidence because of its use. It has a residual marks from an used sticky tape on the base. Stamped on the base, REGD TRADE MARK / P E N L O N / MADE IN ENGLANDlaryngoscope, handle, screwed laryngoscope, screw, penlon, battery

Curved laryngoscope blade with light bulb only. It has visible scratches on top and back side of the blade. A rusty washer under the handle joint. Is also present in the blade base back side a curved shaped lamina attached by a screw. This blade correspond to a large size (adult) laryngoscope blade. It has stamped on the base inscriptions about: trade mark (PENLON), place where it was made (ENGLAND) and its material (Stainless).Stamped on the blade base, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped on the back edge of the blade, STAINLESSblade, penlon, light bulb, laryngoscope

Seward laryngoscope blade only. No light bulb is present in this item. Size1 for infants use. Minor scratches and dust around the piece. Some hit marks on top of the blade and base. Rusty washer under the joint base. Stamped on the base, lateral side: the trade mark details (PENLON), place where it was made (ENGLAND) and at the back side of the blade the type of blade (SEWARD) and the size (1). Stamped, REGD. TRADE MARK / PENLON / MADE IN ENGLANDblade, laryngoscope, seward, light bulb, size 1, penlon

Magill straight laryngoscope blade with tubular space for a light bulb connection (no light bulb is present). It is a PENLON piece, made in England. Size 1, for infant use. Has a slight yellowish discolouration over its base. General scratches around the base of the blade and a sticky old mark bellow an engraved inscription. It has engraved the name of the hospital where it came from and the initials of its owner.Engraved under the blade arm base the name, Royal Childrens Hospital Engraved in its lateral side attachment base piece the initials, D. A. Stamped at the back of the attachment base piece the type and size, MAGILL / 1 Stamped in its lateral side attachment base piece the trademark name and its made place, REG [is not visible the continuation] / PENLON / MADE IN ENGLANDmagill, blade, royal childrens hospital, metal, d.a.

Complete Macintosh laryngoscope piece with a curved large sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general scratches on its surface because its use. At the back of the blade is still attached the curved lamina as holder of the base with the blade in its regular use position. Several engraved and stamped inscriptions are present all over the handle and blade (see inscriptions for details). Stamped on the base of the blade, BOC Stamped on the edge of the back side blade, STAINLESS Stamped on the back side blade base, MADE IN ENGLAND Engraved at the base of the blade attachment place, MAINLAND Engraved at the edge of the serrated grip of the handle, Alfred Anaes Stamped at the base of the handle, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Stamped at the bottom of the handle base, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Engraved at the bottom of the handle base, AnaeA / ALFREDlaryngoscope, complete laryngoscope, boc, penlon, handle, alfred hospital, anaesthesia

Object belonged to and was used by Dr Lennard Travers 1950-1970.Complete Macintosh laryngoscope piece with a curved medium sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general deep scratches on its surface and a slight metal deformation on top back of the blade. At the back of the blade is still attached the hinge that keeps in regular position the base and the blade, is also present a worn surface in this area. Green spots of dust and oxidation processes are present over the blade and the handle areas. A handle manufacturer stamp is located at the base of handle (see inscriptions for details).Stamped into base of handle: LONGWORTH INST. CO. / OXFORD / ENGLANDmacintosh, laryngoscope, blade, handle, longworth inst. co., england

Curved MAC (Macintosh) HEINE laryngoscope blade with light bulb, size 4. Made in Germany with stainless steel materials. Minor scratches and hit surface marks are around the piece, mostly near the base of the blade. Connector point located at the base of the blade is slightly worn out. Stamped on the base of the blade back edge side, HEINE / STAINLESS / W.-GERMANY Stamped at the lateral back side of the blade, MAC 4airway, laryngoscope, alfred hospital, melbourne, mac 4 heine, heine, blade, ball, christine

Semi straight infant Macintosh blade with light bulb only. The item has a general good conservation and completeness regarding its hinge piece and base bulb connector. It has stamped the manufacturer name (PENLON) and the place where it was made (New Zealand).Stamped, REGD TRADE MARK / PENLON / MADE IN NEW ZEALANDpenlon, macintosh, straight laryngoscope, infant, blade, laryngoscope, new zealand

A Soper adult size laryngoscope blade with bulb only. The item has several deep scratches over the surface and below of the blade. Oxide spots are present over the blade surface. The top surface of the blade is slightly bended. The end of the blade has a perforated line. On the base of blade is etched the word 'Whittam'.Engraved twice on the base of the blade, Whittam / Whittamsoper, blade, laryngoscope, adult, light bulb

A Soper straight laryngoscope blade adult size with bulb only. The blade has minor scratches over its surface and below the arm's blade because of its use. Presence of an old sticky tape mark under the blade. The contact stud at the base of the blade is worn. The end of the blade has a perforated line as part of its design. The metallic base of the light bulb has an oxide spot on it. No inscriptions. No inscriptionssoper, laryngoscope, blade, adult, light bulb

Chrome plated metal "L" shaped tongue depressor. The depressor arm downside has cross-hatched grooves to facilitate adherence to the tong. A small metal tube is attached to the upper-side of the depressor through which anaesthesia or oxygen could be administered. The lateral arm handle has grips engraved to attach the mouth gag frame which is missing. This item has a stamp inscription on its handle about maker's details, size and material. Black spots of dust are present inside the metal tube and out near the extreme of the tube. It has accumulated dust between the cross-hatched grooves. Minor scratches around the piece.Stamped in the depressor handle, D.H.A. / 6 / STAINLESSboyle-davis, tongue depressor, airway management

New instruments were created using as archetype Physick´s tonsilotome model. Fahnestock, in the United States, 1832, Mackenzie in London, 1880, Brunings in 1908 and Sluder in 1911 in the United "States developed similar equipment. Greenfield Sluder, an ENT doctor, in Saint Louis was not the first to use the guillotine-cutter for tonsillectomy, but he published a study, in 1912, in which he affirmed to have reached 99.6% of success in his surgeries through this technique (1,2). They all aimed to accomplish surgery as fast as they could, especially in children, for the account of the lack of anesthetic techniques." Retrieved from URL: http://www.internationalarchivesent.org/additional/acervo_eng.asp?id=395 Sluder's Tonsil Guillotine large size. This metal piece of tonsillectomy equipment was designed by Greenfield Sluder in 1911. The piece has generalised oxidation spots on its surface but mostly founded over the top retractile arm blade holder and handle, also has sulphated areas at the base of the handle surface with a bluish colouration. This piece has a screw attached on top of the arm as part of the adjustable blade retractile system.sluder, greenfield, tonsil, guillotine, tonsillectomy

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Complete laryngoscope used by Dr Lennard Travers. Medium sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal. The handle has a serrated grip for easy use and it is also a container for two batteries, it has a switch on its base. The full piece has visible and deep scratches over the top of blade around the stamped blade type inscription. The base of the blade has a worn surface with a slight discolouration due its use. No presence of led light bulb on blade. Minor scratches on handle base battery deposit with an ON - OFF switch black button. Stamped on blade, FLAGG LARYNGOSCOPE Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, laryngoscope, flagg blade, button, battery handle, straight blade

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Small sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal with light bulb attached. The piece has a general excellent condition and brightness over its surface. The laryngoscope blade type is stamped on top of the blade and the manufacturer seal is located at the base back side of the blade. Stamped on top of the blade, FLAGG LARYNGOSCOPE Stamped seal at the base back side, W/A [inside a triangle shape]flagg, light bulb, straight blade, welch allyn company (wa)

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope was designed to meet certain expectations about laryngeal access and to avoid major tracheal injuries in patients (Ball, 2014). Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Flagg laryngoscope handle only. The handle has a serrated grip for easy use; it is also a container for two batteries and has a switch on its base with an ON - OFF switch black button which quite rusty. The handle has a screw on top of it, used to secure the blade. The full piece has minor scratches over its surface. It has a small crack in the switch area and a missing screw bellows it. The handle has an inscription about the manufacturer company seal and name stamped at the top of the handle ring.Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, handle, switch, laryngoscope

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a baby size, with an unfitted light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and the place where it was made along with the owner’s name engraved at the back of the blade. Engraved at the back of the blade near light bulb the owner details: R.C.H. / O.P.T. Stamped at the back blade base into metal the manufacturer's name and place: Longworth / MADE IN ENGLAND Stamped on light bulb base serrated surface, HEINE XHL / #059 2,5v paediatric blades, royal children's hospital, macintosh, light bulb, longworth, blade, laryngoscope