Coloured photograph of the Maple Street Primary School Grade 3-4 W 1999 class and the teachers. Their names are: 3rd Row L-R: Caitlin Wyatt, Michael Goudge, Chloe Whittle, Mikayla Abbott, Tegan Raeburn, Lauren Roberts, Chris Stringer, Gary Fletcher-Thomas, Kaine Leech, Hayley Rowan. 2nd Row L-R: Madeline Briggs, Sheridan Olsen, Clayton Chapman, Nathan Hogan, Justin Moore, Matthew Geyer, Ethan Robinson-Hendry, Amelia Hunt. Front Row L-R: Samantha Gorrie, Eva Staples, Andrew Welsh, Callum Kentish, Bethany Degenhardt, Kyle Malcolm, Erin Doherty, Richelle Wells. Absent: Matthew Sheedy. Teacher: K Gerber. Principal: Mr David Robins.Arthur Reed Photoseducation, primary, golden square laurel st p.s., golden square maple street p.s. collection - photograph - grade 1-2 r 1999, caitlin wyatt, michael goudge, chloe whittle, mikayla abbott, tegan raeburn, lauren roberts, chris stringer, gary fletcher-thomas, kaine leech, hayley rowan, madeline briggs, sheridan olsen, clayton chapman, nathan hogan, justin moore, matthew geyer, ethan robinson-hendry, amelia hunt, samantha gorrie, eva staples, andrew welsh, callum kentish, bethany degenhardt, kyle malcolm, erin doherty, richelle wells, matthew sheedy, k gerber, mr david robins, arthur reed photos

Coloured photograph of the Maple Street Primary School Grade 3-4 W 1999 class and the teachers. Their names are: 3rd Row L-R: Jessica Clarkson, Sathvik Kumar, Paul Carroll, Talan Sinclair, Jenna Maree Brannagan, Kerrie McDowell, Alan Clark, Lauren Hooper, Sam Rofe, Bridget Casey, Holly Fern. 2nd Row L-R: Tyson Cope, Glenn Wyatt, David Ross, Joel Hilson, Elise Watts, Thomas Goodridge, Jeremiah Oibo, Rhett Parry, Curtis Brown. Front Row L-R: Matthew Ferrari, Thomas Woodward-Hunt, Seann Fordham, Sam Vickers, Kristen Mapperson, Travis Kennedy, Nathan Green, Kin Tho, Davy Man. Teachers: G Wood, V Schavoni. Principal: Mr David Robins.Arthur Reed Photoseducation, primary, golden square laurel st p.s., golden square maple street p.s. collection - photograph - grade 3-4 w 1999, jessica clarkson, sathvik kumar, paul carroll, talan sinclair, jenna maree brannagan, kerrie mcdowell, alan clark, lauren hooper, sam rofe, bridget casey, holly fern, tyson cope, glenn wyatt, david ross, joel hilson, elise watts, thomas goodridge, jeremiah oibo, rhett parry, curtis brown, matthew ferrari, thomas woodward-hunt, seann fordham, sam vickers, kristen mapperson, travis kennedy, nathan green, kin tho, davy man, g wood, v schavoni, mr david robins, arthur reed photos

Coloured photograph of the Maple Street Primary School Grade 5-6 L 1999 class and their teacher. Their names are: 3rd Row L-R: Samantha Keeping, Stevie-Lee Jorgensen, Rachael Owens Adele Lowry, Daniel Williams, Nathan Humphreys, Braden Leech, Samantha Manton, Leigh Flower. 2nd Row L-R: Joshua Drinkwater, Tegan Doherty Danny O'Connor, Danielle Raeburn, Beau Ritchi, Danielle McNamara, Michael Lowe, Chloe Reeves. Front Row L-R: Matthew Carmichael, Maurice Allan, Jacana Ferrari, Andrew Bergman, Mark Cummings, James Moffat, Bridget Callow, Marnie Smith, Jason Pearce, Grant McKune. Absent: Evan McHugh, Adam Wharton. Teacher: S Lacey. Principal: Mr David Robins.Arthur Reed Photoseducation, primary, golden square laurel st p.s., golden square maple street p.s. collection - photograph - grade 5-6 l 1999, samantha keeping, stevie-lee jorgensen, rachael owens adele lowry, daniel williams, nathan humphreys, braden leech, samantha manton, leigh flower, joshua drinkwater, tegan doherty danny o'connor, danielle raeburn, beau ritchi, danielle mcnamara, michael lowe, chloe reeves, matthew carmichael, maurice allan, jacana ferrari, andrew bergman, mark cummings, james moffat, bridget callow, marnie smith, jason pearce, grant mckune, evan mchugh, adam wharton, s lacey, mr david robins, arthur reed photos

Coloured photograph of the Maple Street Primary School Grade Prep N 1999 and their teacher. Children are wearing school uniform. Their names are: 3rd Row L-R: Terrance Reeves, Tyler Davies, Chantelle Brown, Alyce Wells, Sarah Welsh, Becki Graham, Emma Tonkin, Rosa Man, Christopher Walsh. 2nd Row L-R: Jesse Goudge, Julian Ross, Jarrad Lowe, Tara Woods, Jye Healey, Sebastian Young, Mark Higginbottom, Kailin Delves. Front Row L-R: Coby Rodgers, Tia Dole, Samantha Ferrari, Sharifah Oibo, Karl McDowell, Kai Ng, Michylla Hewitt-Hill, Stephanie Brennan, Nikitah Barton-Page. Absent: Amy-Rose Howard. Teacher: M Nicks. Principal: Mr David Robins.Arthur Reed Photoseducation, primary, golden square laurel st p.s., golden square maple street p.s. collection - photograph - maple street primary school grade prep n 1999, terrance reeves, tyler davies, chantelle brown, alyce wells, sarah welsh, becki graham, emma tonkin, rosa man, christopher walsh, jesse goudge, julian ross, jarrad lowe, tara woods, jye healey, sebastian young, mark higginbottom, kailin delves, coby rodgers, tia dole, samantha ferrari, sharifah oibo, karl mcdowell, kai ng, michylla hewitt-hill, stephanie brennan, nikitah barton-page, amy-rose howard, m nicks, mr david robins, arthur reed photos

Coloured photograph of the Maple Street Primary School Grade 2 - 3 R class and their teachers. Their names are: - 3rd Row L-R: Thomas Ansell, Annie Ng, Liam Gordes, Shane Lowry, Shanelle Crole, Zachary Jury, Hayley Saunders, Dale Lowry, Tamara Ferrari, James Ferrari. 2nd Row L-R: Rebecca Craig, Matthew Compston, Ashlyn Kentish, Kristen Olsen, Ricky Apps, Chloe Coombs, Dirk Muir, Wanisha Malcolm, Joshua Patten. Front Row L-R: Jasmine Aldous Rachel Horgan, Benjamin Reidy, Corey Bray, Sara Hunt, Chanel Healey, Christina Foreman, Tyson Brennan, Emma Goudge. Teachers: B Reidy, E Bruhn. Principal: Mr David Robins.Arthur Reed Photoseducation, primary, golden square laurel st p.s., golden square laurel street p.s. collection - photograph - golden square maple street primary school 1999, thomas ansell, annie ng, liam gordes, shane lowry, shanelle crole, zachary jury, hayley saunders, dale lowry, tamara ferrari, james ferrari, rebecca craig, matthew compston, ashlyn kentish, kristen olsen, ricky apps, chloe coombs, dirk muir, wanisha malcolm, joshua patten, jasmine aldous rachel horgan, benjamin reidy, corey bray, sara hunt, chanel healey, christina foreman, tyson brennan, emma goudge, b reidy, e bruhn, mr david robins, arthur reed photos

Coloured photograph of the Maple Street Primary School Grade 3-4 A class and their teacher. Children are wearing school uniform. Their names are: 3rd Row, L-R: Kyle Leech, Sarah Fern, Larissa Carson, David Thatcher, Rhys Bryson, Jacinta Brennan, Todd Kairns, Stephanie Thompson, Caleb Wallis, Kaye Haines. 2nd Row L-R: Christopher Roberts, Mia Williams, Ashley Fletcher-Thomas,, Patrick Cummins, Matthew Williams, Joshua Dimond, Erin O'Loughlin, Jordan Sloan. Front Row L-R: Alicia Barnett, Carla Anderson, Brady Rowan, Joshua Baird, Caitlin Davies, Andrew Shelton, Catherine Ross, Danielle Gahan. Absent: Jesse Bennett, Sean Wharton. Teacher: N Ansell. Principal: Mr David Robins.Arthur Reed Photoseducation, primary, golden square laurel st p.s., golden square laurel street p.s. collection - photograph - maple street primary school 1999, kyle leech, sarah fern, larissa carson, david thatcher, rhys bryson, jacinta brennan, todd kairns, stephanie thompson, caleb wallis, kaye haines, christopher roberts, mia williams, ashley fletcher-thomas, patrick cummins, matthew williams, joshua dimond, erin o'loughlin, jordan sloan, alicia barnett, carla anderson, brady rowan, joshua baird, caitlin davies, andrew shelton, catherine ross, danielle gahan, jesse bennett, sean wharton, n ansell, mr david robins, arthur reed photos

black and white photo of Bruce Tuff: label on photo states e this old photo was found in the loft when doing some renovations for our new staffroom. Do you know this person ? Handwritten notes state e Bay of Biscay' scholarship named after him. Bruce Tuff, lived on corner of Maple/Panton St. killed in 2nd. WW. See attached document, where he baled out of his plane over the English Channel, to try to rescue his commanding officer whose plane had crashed. Written on paper insert: Sister Margaret Ruff, Harley st., Bendigo, now Elliott. Ken ?? Tuff younger, Beth Dungey - brother, Harkness St., Image shows young man, dressed in Airforce uniform. Head and shoulders portrait, mounted on buff board.education, primary, golden square laurel st p.s.

A moulding plane is a specialised plane used for making complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmaker's shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. This item may be a one off item made by a cabinet maker for a particular project as the plane is not marked resulting in no history or manufacturing provenance available.A vintage tool made by an unknown maker, this item was made commercially and by individual cabinet makers for particular furniture projects that could produce an ornamental finish to timber. The tool was used before routers and spindle moulders came into regular use after World War l l, a time when to produce a decorative moulding for a piece of furniture, door trims, etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant early tool that today is quite rare and sought by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Plane, wooden, narrow blade. Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, wooden plane, wood working tool, boat building tool, tool, woodwork tool, plane

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The subject planes blade is designed to cut a groove and it's blade maker (M Gilmour) is not listed by collectors of vintage planes as a known plane makers of the 19th or 20th century.A vintage tool made by an unknown maker, this item was made commercially for firms and individuals who worked in wood and needed a tool that could produce an ornamental finish to timber. These profiled planes came in various shapes and sizes to achieve the required decorative finish. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Grooving PlaneM Gilmour stamped on bladewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, moulding plane, groove plane, joiners tools, hand plane, carpenters tools

A smoothing plane is a wood plane used for making a smooth surface to wood surfaces traditionally, these planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape or size required. The blade, or iron was likewise formed to the intended flat or level profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and smoothing planes for the full range of work to be performed. Large crown mouldings or smoothing plane surfaces required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This plane is a coffin pattern smoothing plane and is unmarked so the maker is unknown however it's design and patina indicate it was probably made in the mid to late 19th century and would be regarded as a vintage or antique item sought after today by collectors of vintage tools. A vintage tool made by an unknown maker, that was made commercially for firms and individuals who worked in wood and needed a tool that could produce a flat or level finish to timber. These types of planes came in various shapes and sizes to achieve the required finish to timber surfaces used in cabinet making. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools only. Smoothing Plane Coffin type Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath

The subject item is a smoothing plane traditionally wood planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding or had a flat blade use for achieving a flat and smooth finish to timber. The blade, or iron was likewise formed to the intended moulding profile or for smoothing and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and flat bladed planes for a full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The maker Atkin and Sons were a prolific Birmingham plane maker, active from 1863 to 1900 when they became Atkin and Sons Ltd and traded until 1966. Their trademark was actually "BENEFACTUM" which is Latin for "well made."A well-made tool from the early 20th century from a well-known company that ceased trading in Birmingham in 1966, today this tool from this company is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes as well as smoothing timber projects were created by the use of hand tools. Tools that were themselves handmade shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to finish timber.Jointer or Jack Plane with fishtail handle, Size of iron 2 1/2 inches wide, Stamped GN inside W made by Akins and Sons Birmingham UKflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, jointer plane, plane

Colour photographs Maple Street Primary School staff and grades 1990. a. Staff photo, no names. B Grade Prep F Teacher Mrs. Farrow, c. Prep H Teacher A. Hocking; d. Grade 1/2M Teacher Judith Michell; e. Grade 3/4S,Teacher Brenda Savy; f. Grade 4W Teacher Debbie Flint; g. Grade 3E Teacher Bob Elliott; h. Grade 1M Teacher Susan McEvoy i. Grade 5H Teacher Anne Hartney; j. Grade 3W teacher George Wood; k. Grade 1R Teacher Mrs. Burke, Mrs Rodda; l. Grade 5/6W teacher Ross Wood; m. Grade 6G teacher not named n. Grade 4H teacher J. Hayman; o Grade 2H teacher Colin Hayes.. Names of students typed on piece of board, not attached to images but enclosed in plastic pocket.bendigo, education, maple street primary school

Collection of colour grade photos mounted on grey patterned board , Maple Street Primary School, Golden Square, 1993. a) Grade 1/2N Teacher Meredith Nicks; b) Grade 1M Teacher Kerrie McMillin; c) Prep H Teacher Miss Kyriakakis and Ms Hocking; d) Prep D Sharon Derby; e) Grade 4W Teacher George Wood; f) Grade 3/4L Teacher Sandra Lacey; g) Grade 3E Teachers Mr. R. Issell, Mr. R. Elliott; h) Grade 2R Teachers M. Rodda and C. Freeman; i) Grade 6K Teachers Mrs Kent, Mrs Seppings, Mrs Connolly; j) Grade 6G Teachers F. Gargiulo, K. Perry; k) Grade 5O Teacher Gary Olver; L) Grade 4/5W Teacher Ross Wood. Student names written on bottom of each photo.bendigo, education, maple street primary school

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The maker of this plane is unknown but probably made in London early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world with no makers marks however moulding planes from this era are well sought after by collectors of vintage tools.A vintage tool made by an unknown maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Wood Moulding Plane Rabbet typeMarked J Heath on end, (no makers mark)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames

A smoothing or wood plane is a wood plane used for making a smooth or decorative moulding to the surface of wood.  Traditionally these planes were made from blocks of wear resistant hardwood, often beech or maple, which were worked to the shape or size required. The blade, or iron was likewise formed to the intended flat or ornamental profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and smoothing planes for the full range of work to be performed. Large crown Mouldings or smoothing plane surfaces required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This plane is a coffin pattern smoothing plane and is unmarked so the maker is unknown however it's design and patina indicate it was probably made in the mid to late 19th century and would be regarded as a vintage or antique item sought after today by collectors of vintage tools. A vintage tool made by an unknown maker, that was made commercially for firms and individuals who worked in wood and needed a tool that could produce a flat or level finish to timber. These types of planes came in various shapes and sizes to achieve the required finish to timber surfaces used in cabinet making. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools only. Complex moulding wood planeNoneflagstaff hill, warrnambool, plane, flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, plane, moulding plane, complex moulding plane, cabinet makers tools

Set of 11 Agfa Plastic mounted slides - from the Eldon Hogan collection - possibly on an ARE Bendigo tours - mid 1960's (black destination rolls) and late 1960's or early 1970's. Scanned on the Canon scanner at the depot 15/12/1971 at the time of the installation of the scanner. .1 - front of depot -26, 19, 24, 29 and 28 amongst those present. .2 - ditto .3 - 24 departing depot .4 - 26 at Eaglehawk .5 - No. 5 turning from Pall Mall into Mitchell St with town hall in background. .6 - No. 5 using crossover in Mitchell St - with Maples, CBA Bank, Astor, Homecrafts, Roger David shops or signs in the background. .7 - ditto .8 - bogie car at Charing Cross with the Fountain Plaza shopping centre in the background. .9 - Charing Cross, with the fountain in the foreground, The Beehive and three trams in the view. .10 - No. 24 outbound, Golden Square line crossing the bridge over the creek, adjacent to the discovery of Gold Monument. .11 - ditto. tramways, trams, bendigo, eaglehawk, depot, charing cross, golden square, tram 26, tram 19, tram 24, tram 29, tram 28, tram 26, tram 5

Colour photos of staff and grades at Maple Street Primary School, Golden Square, 1996. a. Staff photo: back row Debbie Kent, Maylene Rodda, George Wood, Ross Wood, Peter Pritchard, Bob Elliott. Middle row Margaret Gregson, Sonya Doolan, Gail Drew, Frank Gargiulo, Brenda Savy. Front Row David Robins, Sharon Derby, Meredith Nicks, Sandra Lacey, Sue Hoile, Anne Hocking. B. Grade Prep ? OP/D; c Grade 3/4W; d. Grade 5/6G Teacher F. Gargiulo; e. Grade 5/6L Teacher S. Lacey; f. Grade 5/6S Teacher Brenda Savy; g. Grade 3/4K Teacher Debbie Kent; h. Grade 3/4E Teacher E. Elliott; Grade OP/N ( prep year ? ) Teacher M. Nicks; j. Grade 1/2R Teacher M. Rodda. Student names on bottom of images.bendigo, education, maple street primary school

Black and white photograph of a lightly loaded cable car set, trailer 415, eastbound in Bourke St, nearing Russell St. Set has destination of Nicholson St. The Conductor and Gripman are both on the grip car - "gossiping". In the background are signs for Sharpe's store, Parers Hotel, Lewis's and Normans. On the underside of the photograph written in black ink "Cable Tram in Bourke St Jan 1937" Noelle Jones - 24/5/2021 It is no later than 1946, as Maples purchased the Love & Lewis business (194-6 Bourke St) in that year (the business was being sold by the executors of the owner). Note also that Parer's (not Parkers) Hotel, at 200 Bourke Street, was established in the 1880s by the Parer Brothers, originally from Spain. The most famous member of the family was Damien Parer, the WWII photographer. The building was demolished in 1960, and is the site of the Midcity Arcade. Sharpes bought the property on the left (202-4 Bourke St) in 1954, after being tenants for 20 years. Normans Corner Stores opened in 1932.trams, tramways, bourke st, nicholson st, cable trams, crews, tram 415

A moulding plane is a specialised plane used for making complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmaker's shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. All we know about J Budd is that he was a toolmaker and retailer that operated a business in London between 1832 to 1864. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A vintage tool believed to have been made by a known maker, J Budd given the inscription on the item of "JB" this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce an ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll a time when to produce a decorative moulding for a piece of furniture, door trims, etc. or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Plane, Moulding, Ogee- PlainStamped JB No 6flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about George Davis is he and his successors made planes in Birmingham, England, from about 1821 to 1876. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a known maker, this item was made commercially for firms and individuals who worked in wood and needed a tool that could produce a ornamental finish to timber. These profiled planes came in various shapes and sizes to achieve a decorative finish. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Moulding plane centre bead, also called Single Bead Reeding Plane. Stamped maker G Davis Has GM inside W (owner) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane, moulding, single bead reeding plane

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about J Budd is that he was a tool maker and retailer that operated a business in London between 1832 to 1864. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding Plane J Budd London & No 4 opposite end Stamped J Heath (owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, j budd

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about J Budd is that he was a tool maker and retailer that operated a business in London between 1832 to 1864. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding Plane J Budd London maker & No 6, opposite end Stamped J Heath (owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, j budd

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about John Ames is that he was a tool maker and retailer that operated a business in London early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A significant item from the mid to late 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. It also gives an insight into how many manufacturing companies bid for the rights to use prison labour to make their products at this time in our history. Complex Moulding Plane J Ames maker, No 1 at opposite end Stamped J Heath (owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about John Ames is that he was a tool maker and retailer that operated a business in London early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A significant item from the mid to late 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. It also gives an insight into how many manufacturing companies bid for the rights to use prison labour to make their products at this time in our history. Complex Moulding Plane Maker J Ames Stamped & No 6 & 5/16 opposite end, also J Heath (owner). flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about John Ames is that he was a tool maker and retailer that operated a business in London early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A significant item from the mid to late 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. It also gives an insight into how many manufacturing companies bid for the rights to use prison labour to make their products at this time in our history. Complex Moulding Plane with four screws on one sideMaker J Ames No 2 opposite end J Heath (owner) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about R Knight is that he was a tool maker and retailer that operated a business in England early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Complex Moulding Plane Maker R Knight, Stamped T Whlele (owner) & No 5 opposite endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about John Ames is that he was a tool maker and retailer that operated a business in London early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding opposite end has 4 screws on bottomJ Ames maker, Stamped J Heath (owner) & No 7 flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames