The Victoria Tower made landfall after a voyage of 85 days from Liverpool, and headed towards the Port Phillip Heads pilot boarding ground. It had been an uneventful voyage despite some contrary headwinds (causing the long voyage) and problems with the compasses, that could not be relied upon. The weather was hazy, with gale force winds and heavy rain squalls. Reaching the pilot ground Captain Kerr fired rockets and burned blue lights to attract attention, but met with no response. Sighting the Cape Shank lighthouse he sailed towards it, then wore the Victoria Tower onto a port tack in a westerly direction. No soundings nor observations were taken, as Captain Kerr was confident he was on a safe course and knew his position tolerably well. Slatted wooden cabin door with 2 locksPatent disk on top lock, W2 SR on either side of coat of arms. Number 60 in the middle and 1A carpenter patentee underneathdoor, cabin, victoria tower, shipwrecks

Tait collection: item 16 of 62 This is the probate document for Harold Dawkins who died in 1898 in Warrnambool. He left no real estate but had personal estate to the value of £369. This was inherited by his widow, Margreta Mary Elizabeth Dawkins. Harold Dawkins’ father, William, established a timber business in partnership with George Hockley in the 1870s in Timor Street. The business was known as Dawkins and Son after 1890 and moved to the corner of Fairy and Lava Streets before again moving to the corner of Lava and Kepler Streets. In 1923 this business was taken over by the Ponting Brothers. Harold Dawkins, a carpenter and builder, married in 1884 and built a house at 68 Hyland Street (previously Nicol Street) which still stands. Harold died of typhoid fever when he was 37 and the family moved to Western Australia. This probate document was prepared by Ernest Chambers, a Warrnambool lawyer with offices in Warrnambool, Koroit and Port Fairy in the late 19th century and early 20th century. This document has been passed down by the successive lawyers occupying the Kepler Street building and was located in the old premises of the legal firm, now defunct, of Mackay Taylor. This document is of considerable interest because it contains information on Harold Dawkins, a resident of Warrnambool in the late 19th century and a member of a prominent Warrnambool family. It is also of importance because it was a document prepared by a local Warrnambool lawyer at that time. This is one sheet of parchment paper folded into two and with handwritten material on three sides. Three of the pages are edged with black lines. A seal of the Supreme Court of the Colony of Victoria is attached with green ribbon and there is a red stamp of the Master in Equity of the Supreme Court. ‘In the Supreme Court of Victoria in the Probate Jurisdiction in the Will of Harold Dawkins, late of Warrnambool, in the Colony of Victoria, carpenter, deceased – Probate. I certify that no duty is payable on the within probate. J. Poole, Officer under section 96 Act 1060, 7/4/98, E.J.W. Chambers, Proctor, Warrnambool’harold dawkins, ernest chambers, warrnambool, tait collection

Receipt from J. Harris, Monumental and General Mason, Monumental Works, Carpenter Street. For work done on a Cemetery Monument. Dated March 1921. Also a photocopy of receipt.ephemera, mementoes, malloy family, malloy family document, mrs malloy, j harris

Black and white photograph of John Carpenter Snr showing a white haired man with trimmed beard wearing collarless jacket, white shirt and narrow ribbon bow tie.genealogy

Two other black and white copies, one 9 x 14 cm, second 11 x 21.5 cmSepia photograph showing houses on dunes at New Works. House on right is harbour engineer's house, next Carpenter house, PWD jetty in front. Lakes Entrance Victoriajetties, houses, boats and boating, topography

Used in carpenteringSpokeshaves. 3 large and 2 small blades with wooden handlesOn Largest: "Isaac Greaves"

Used in carpenteringSpokeshaves. 3 large and 2 small blades with wooden handlesOn Largest: "Isaac Greaves"

Used in carpenteringSpokeshaves. 3 large and 2 small blades with wooden handlesOn Largest: "Isaac Greaves"

Used in carpenteringSpokeshaves. 3 large and 2 small blades with wooden handlesOn Largest: "Isaac Greaves"

Used in carpenteringSpokeshaves. 3 large and 2 small blades with wooden handlesOn Largest: "Isaac Greaves"

Context: A brace is a hand tool used with a bit (drill bit or auger) to drill holes, usually in wood. The pressure is applied to the top and the tool is rotated with a U-shaped grip. Bits used to come in a variety of types but today the more commonly used Ridgeway and Irwin pattern bits also rely on a snail point (called the snail), which is a tapered screw point shaped the same as a wood screw thread, which helps to pull the bit into the wood as the user turns the brace handle and applies pressure. The designs used today come from an original idea and pattern invented by John S Fray. Company History: John S. Fray (1833 ) immigrated to Bridgeport Connecticut USA from England in the 1850s and established a working relationship with Nelson Spofford, who held an 1858 patent for a bit brace (the tool could be augured in a continuous circular motion by hand). He established the John S. Fray Co. around the same time and immediately began producing the Spofford bit brace. Fray himself held at least two patents: one awarded in 1869 for a boring brace attachment, and another awarded in 1883 for a tool handle. By 1889, the firm was located at the industrial complex that sits between the former International Silver Company and the former Bridgeport Chain Company on Crescent Avenue and is identified on the Sanborn Insurance Atlas as a manufacturer of Spofford bit braces, hollow handle awl, and toolsets. The company was in competition with Peck Stow and Wilcox Co. of Southington, and in 1898 was enjoined from making a ratchet bit brace for which the latter company held a patent. By the 1920s, the factory had been purchased by the Stanley Company of New Britain and leased to the American Tube and Stamping Company, a manufacturer of brass, copper, seamless, and bicycle tubing, which also ran a rolling mill to the south on Stafford Avenue (now demolished). The Stanley Company bought both mills in 1926, perhaps as a strategic move to be located along the Bridgeport Harbour, through which much of the raw material used in its operations throughout the state came. By the 1950s, the Crescent Avenue operations had been moved to other sites in Connecticut, and Stanley again leased the building to a company called Cornwall and Patterson, a manufacturer of piano hardware. Today the building appears to be vacant. An early carpenters tool made by a well known early manufacturer from America who instigated many innovations to the making of tools. His early pattern for the improvement of a tool that could be used for the boring of holes in wood was a significant step forward. His design for a boring brace attachment and later a specific handle is still in use today and his original brace and bit is now sought after by collectors of antique tools. Spofford Carpenter's Bit Brace metal has bit attached. Wing nut holds bit in place but nut missing. holds bit in place. 285mm long x 160mm Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

BHS CollectionBlack and white postcard of Bendigo Tramways Electric Tram No. 3 showing a driver and a conductor. Advertising 'Hartley's Everything for Sport'. Taken in front of Bendigo Cemetery, Carpenter St, Bendigo.Kodak Australiaperson, individual, basil miller

SS Bogong built Williamstown 1878, wrecked on return to Lakes Entrance September 1896Black and white photograph showing SS Bogong moored at New Works Wharf, shows John Carpenters twin gabled house on foreshore at rear of boat. Lakes Entrance Victoria jetties, ships and shipping

Taken in garden either Bairnsdale or Lakes Entrance Victoria 1912Black and white postcard of Charles Henry and Keith Carpenter wearing identical knitted clothing of jumper and short pants dark socks black boots on Keith button shoes on Charles.fashion, genealogy

People - "Carpenter, Minnie"

This building was the original home of the family of George Carpenter, son of John Carpenter, first contractor for construction of the man-made entrance to the lake system, the house was relocated to Hunters Lane, December 2002.Colour photograph of Skippers Restaurant, Esplanade. The photograph shows a weatherboard building, corrugated iron roof, gabled extension at left end, hipped extension at right. Historical evidence shows that the building consists of additions to original smaller residence. Lakes Entrance Victoriaarchitecture, township, restaurant

Original plan for new workshops for the Ballarat School of Mines. Includes elevations and sections, abd has been coloured with watercolour. The new workshops housed carpenters shop, plumbers, blacksmihing and stores. ballarat school of mines, new workshops, carpentry, blacksmithing, plumbing, architectural plan, laboratory

Bendigo Advertiser ''The way we were'' from 2002. All aboard: a Bendigo tram when the line ran along Mitchell and Carpenter streets to the cemetery, circa 1960. The clip is in a folder.newspaper, bendigo advertiser, the way we were

Looking south along Carpenter StreetDigital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencybendigo, bendigo cemetery, bendigo tramways no. 26, carpenter street. quarry hill, eaglehawk, george coop collection, tram

Looking south along Carpenter StreetDigital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencybendigo, bendigo cemetery, bendigo tramways no. 26, carpenter street. quarry hill, eaglehawk, george coop collection, tram

Looking south along Carpenter StreetDigital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencybendigo, bendigo cemetery, bendigo tramways no. 26, carpenter street. quarry hill, eaglehawk, george coop collection, tram

The main purpose of carpenter's pincers is to pull out nails from wood without damaging the surface. These carpenter's pincers would have been used in Orbost in the construction of new buildings or on a rural property for maintenance.This item is an example of a domestic carpentry tool in common use before the widespread use of power tools.Pincers with long, rounded, pivoted metal handles ending in a pair of jaws for gripping and extracting nails or holding or gripping small objects.woodworking tool pincers carpentry

Colour photograph of Brian Johns yard, showing a red truck, an house, stones and various materials all around. Brian Johns monumental mason Carpenter Street, photo taken July 1993bendigo, business, brian johns

In 1964, Robin and Patricia Boyd spent several weeks on a world tour - Boyd took a leading role at the International Design Conference in Aspen and he also visited Chicago, Yale University, and New York’s World Fair. The Boyds then travelled on to England, Finland (especially to see Tapiola), Russia and India to see Le Corbusier's Chandigarh, and also Hong Kong and Thailand.Colour slide in a mount. Looking down the ramp onto 22 Prescott St from the Carpenter Centre for the Visual Arts, Harvard University, Cambridge, Massachusetts, USA, 1963. (Architect: Le Corbusier.)Made in Australia / 7 / AUG 64Mslide, robin boyd