The lapel badge was worn to signify membership of the Harbour Lights Guild. Variations of this badge were made for different State Guilds by different jewellers or badge manufacturers. Variations also indicated during some eras if the wearer was a full member, worker or honorary.The Harbour Lights Guild was instrumental in securing funds to construct the current building at 717 Flinders Street, and in particular the Memorial chapel and Gymnasium. They were also dedicated volunteers who organised many social functions and events to offer visiting seafarers an opportunity to relax, have fun and socialise away from the ship. The organisation operated from 1906 to the early 1960s in Melbourne and developed an organisational model that was adopted by many branches across Australia and for other global missions.Small round white enamel and gilt lapel badge denoting the Harbour Lights Guild and its association with Mission to Seamen (Mission to Seafarers). The badge incorporates the logo flag of Mission to Seamen.Gold lettering around the edge of the badge: "HARBOUR LIGHT GUILD MELBOURNE" Gold lettering inside central Mission flag: "THE MISSION/TO SEAMEN" Maker's mark on reverse: "K.G. Luke/Melb"volunteers, social, harbour-lights-guild, mission-to-seafarers, membership-tokens, functions, visits, badge, hlg

The lapel badge was worn to signify membership of the Ladies' Harbour Lights Guild. This badge was issued to honorary workers. In the earliest days this status indicated the member as a 1 guinea subscriber to The Harbour Light Guild. "Worker" members subscribed just a shilling but were required to contribute time at the Mission with hosting and facility maintenance. The form of logo indicates this badge as possibly dating back to the 1930s. Donated by Rosalea GreenwoodThe Ladies' Harbour Lights Guild was instrumental in securing funds to construct the current building at 717 Flinders Street. They were also dedicated volunteers who organised many social functions and events to offer visiting seafarers an opportunity to relax, have fun and socialise away from the ship. The LHLG which became known as the harbour Lights Guild after WW2 amalgamated with the Flying Angels in the 1960s, therefore these badges are primarily of historical interest. Small round lapel badge denoting Ladies Harbour Lights Guild and its association with Mission to Seamen (Mission to Seafarers). The badge incorporates the logo flag of Mission to Seamen. This badge is for an "honorary worker".Gold lettering around the edge of the badge: "HONORARY WORKER" Gold lettering inside central Mission flag: "THE MISSION/TO SEAMEN" enamel, metal, volunteers, badges, social, functions, visits, lhlg, ladies harbour lights guild, mission to seamen, rosalea greenwood, father hatters, david greenwood, station officer, honorary worker, membership, mission to seafarers, seamen's mission, rats of tobruk, madang, papua new guniea, png, a.i.f.

Collection includes copies of invitations to Government House, newspaper clippings and Queen's Scout certificates. George Henderson was the first Greensborough Scout to be awarded the Queen's Scout badge (1960), followed the next year by his brother Bryan. The Henderson family were all associated with the scouting movement.A Greensborough family with a strong association with Scouting.Photocopies of certificates, invitations and newspaper clippings.queens scout, bryan henderson, george henderson, scouts - greensborough

This badge was issued for the Returned Soldiers Association, Victoria. It is numbered on the back of the badge 2050, no makers marks. The RSA preceed the RSSILA Badge of 1916.It is an original badge issued in Victoria in the period 1915-1919A Small badge, brass colour, enamel finish on the front.Front - RSA, Returned Services Association, Victoria. Back - figure 2050.rsa, victoria

The Air Force Association was formed in Melbourne in 1919, by Mr H V Leckie. The Association was formed after Mr Leckie put an advertisement in the newspaper asking for interested former members of the Air Force Corps to meet him.This badge with the number 97277 on the reverse has belonged to a member of the Air Force AssociationA round shape with wings through the middle of the badge, Crown on the top of the badge, the centre is the Air Force red, white and blue. This badge has a pale blue across the bottom, Air Force Association.On the reverse of the badge Number 97277, K G Luke Melb.air force association,, 1919, raaf association, h v leckie

This Association was formed in December 1944 from a number of existing organisations. The membership is open to all ex service personnel, including British Commonwealth and Allied personnel, etcThis organisation was formed in 1944, the badges are originals.A diamond shaped badge, a crown at the top, rising sun, anchor, air force wings in the middle, blue inscribed enamel round the diamond, Aust Legion of ex Servicemen and Women.1st badge - has a 66 badge on the crown, one the reverse v3327, the 2nd badge has a Life Subscriber attachment - a red scroll, on the reverse Brim Melb number 8732556.december 1944, aust legion of ex servicemen and women

The history of the 4th Australian Light Horse Regiment.The 4th Light Horse Regiment is a distinguished predecessor unit of the modern day 4th/19th Prince of Wales's Light Horse Regiment. Hard covered book. 873 pagesOn cover - badge of 4th Light Horse Regiment. On fly leaf: "This edition of Endure and Fight is limited to 513 copies, the number of the 4th Light Horse Regiment's other ranks who embarked for overseas service in October 1914. This is copy number 211.world war 1, unit history, 4th australian light horse regiment

The Tawonga branch of the C.W.A. commenced on the 7th Feb. 1946 and often combined activities with the other branches in the Kiewa Valley. The C.W.A. aimed to improve health, welfare and education for women and children in the country. The Roper family were very involved for many years in the activities of the branch. Clare Roper collected and documented the history of the Tawonga C.W.A. and the Kiewa Valley C.W.A.. Women living in Tawonga were mostly on farms and, in 1946, when the branch commenced would have been feeling more remote with WW11 having had an effect of available workers and the well being of the women and children.Black wooden plaque sloped to a narrow gold coloured border surrounding a black surface with a gold badge shaped plaque. The plaque has writing etched into it and painted white.Tawonga Branch C.W.A. / honours its Members / Kiewa Valley / Group Presidents / Annie V. Roper 1958 - 60 / (Mrs Bert) / Clara J. Roper 1964 - 66 / (Mrs Jack)tawonga. country woman's association of victoria. clara roper. annie roper.

The Tawonga branch of the C.W.A. commenced on the 7th Feb. 1946 and often combined activities with the other branches in the Kiewa Valley. The C.W.A. aimed to improve health, welfare and education for women and children in the country. Women living in Tawonga were mostly on farms and, in 1946, when the branch commenced would have been feeling more remote with WW11 having an effect on available workers and the well being of the women and children.Round green and white badge with the CWA logo in the centre of a green triangular shield. The logo is in gold. Around the triangular shape it is white with Victoria in gold at the top and 2 slim leaves on each side of the other sides. The badge has a green border. The back is gold and two of them have a pin attached. The third has a ring attached at the top. On the back each one has a different inscription and all are hard to read. Each badge is very slightly different in texture and depth of colour perhaps indicating that they were made at different times."Victoria / CWA" On the back - 1. Inscribed in oval shape 'Morgan Swann' but upside down to each other. 2. Inscribed - 'Stoker' 3. Inscribed - 'Stokes' or 'Stones'tawonga. country woman's association of victoria. badge. cwa logo.

The Tawonga branch of the C.W.A. commenced on the 7th Feb. 1946 and often combined activities with the other branches in the Kiewa Valley. The C.W.A. aimed to improve health, welfare and education for women and children in the country. Women living in Tawonga were mostly on farms and, in 1946, when the branch commenced would have been feeling more remote with WW11 having an effect on available workers and the well being of the women and children.Slim rectangular shaped gold badge with a 'v' shape at each end. Its border is wavy. The writing is in green capital letters. At the top in the middle there is a 2 link chain. On the back is a pin.Branch Secretarytawonga. country woman's association of victoria. cwa. badge. branch secretary.

As an historic army uniform with an association to Victoria this item is of local historic and social significance. It is also in very good condition. Woolen khaki peaked hat has a central head band with solid peak connected to the lower front of the head band. The top is high at the front and protrudes out from the headband about 3cm on all sides. There is a brown leather chinstrap on the lower front of the headband above the peak and this has a slide extension that can be enlarged to go under the neck to keep the hat in position in high winds. The chin strap in connected to the headband with two plastic button that have queens crown above a map of Australia. Affixed to the front of the headband above the peak is the Artillery Corps metal hat badge in gold colouring. The interior of the top of the hat has a cotton lining under the woollen exterior and then a plastic protective lining to avoid sweat bleeding onto the exterior. A cloth badge with the makers name sewn to the cloth lining and covered by the plastic protective layer. uniform

Gilt and enamel circular badge with a central red background containing a logo in gold gilt and an outer blue background"Police Strikers' Association" on obverse and "25" and Stokes & Sons Melbourne" on reverse. police, victoria police, 1923, police strike, numismatics, badge

assortment of badges. NSW Country Women's Association ; Royal Victorian Institute For The blind Auxiliary ; Orbost Memorial Hall-1926 ; Red CrossCWA badge - Angus & Coote RVIB - Stokes + Son Melb. Red Cross - Parkes Bris. 2/-badges costume-accessories nsw-country-womens-association royal-victorian-institute-for-the-blind orbost-memorial-hall red-cross

Helena Francis Warren (nee McKeown) was married to William John Warren and lived in Newmerella. She was a fine amateur photographer who supplied the photos for the Back-To-Orbost celebration book in 1937 and also designed the Back-To-Orbost badge. She was known for her soft toy making. (by Ivy Rodwell in from Personalities and Stories of the Early Orbost District by Mary Gilbert)This item is an example of a handcrafted item and reflects the needlework skills of women in the first half of the 20th century.Two dolls - one male and one female - made of maize husks. They are both painted colourfully and are in a plastic box. There is a certificate from the country Women's Association for First prize in Basket Weave Handcrafts and Home Industries.doll handcraft toys maize cwa

cotton beret with AMF with small brass rising sun badge

This 236 page, full-colour hard copy reference work, catalogues the metal insignia embellishments used by all Corps and Schools of the Australian Army (including philanthropic organisations), from 1953 through to the present. The book provides images of the front and the back of a given (metal) insignia set for each Corps etc. Each image set depicts the relevant hat badge, collar badges and epaulette title and/or cloth shoulder title applicable. The book's images record three distinctly different 'generations' of insignia manufacturing methods/types, including the: gilt brass and white metal items used in the 1953 to 1964 period; and anodised aluminium 'StayBright' insignia introduced as from 1964[ and 'BriteShine' insignia introduced with effect from 1997 (running through to the present). The full colour photographic images in the book are complimented by written descriptions which cite each item's distinguishing characteristics... including measures of: typical weight, height, width and thickness (at a given point). A discussion of copies and faked items is also provided, including microscope resolution images of 'tell tale' signs to look for. The entries in the book are organised alphabetically and match those used in the Authors' 614 page eBook version of this work (the eBook is a separate edition which provides scalable images of all relevant insignia and many manufacturing variants).The hard copy and electronic editions of this work are able to be used either separately or concurrently, as and when users require. Regards Mark Corcoran & Arthur Butler The Authors charlibravobooks.com Re: Copyright As the original authors we hold the sole copyright authority to sell this work. This item does not infringe on any copyright, trademark and/or intellectual property rights and we hold specific written publication approval from the Australian Defence Force. Soft cover, spiral bound 235 pagesaustralian army, post ww2 insignia

This 305 page, full colour hard copy reference work, catalogues the series of metal uniform embellishments used by Units and Regiments of the Australian Army, from 1953 through to the date of publication. The book provides images of the front and the back of a given (metal) insignia set for each Unit or Regiment operating within the Australian Army since 1953 (including abolished formations). Each image set, depicts the relevant hat badge, collar badges and epaulette title and/or cloth shoulder title applicable. The book’s images document at least three distinctly different ‘generations’ of insignia manufacturing methods/types, including the: gilt brass and white metal items used in the 1953 to 1964 period; and anodised aluminium ‘StayBright’ insignia introduced as from 1964 and ‘BriteShine’ insignia introduced with effect from 1997 (running through to today). The full colour photographic images in the book are complimented by written descriptions which cite each item’s distinguishing characteristics… including measures of: typical weight, height, width and thickness (at a given point). A discussion of copies and faked items is also provided, including microscope resolution images of ‘tell tale’ signs to look for. The entries in this book are organised alphabetically and are consistent with those used in the Authors’ earlier publications (ie. the 614 page eBook version of Volume 1, as well as with the 236 page ‘Concise’ hard copy Editions of Volume 1). australian army insignia, post ww2 insignia and badges

Yearly award for the best commando within a commando companyLimited production of regimental hat badges has been coloured silver for presentation as an annual award to the best commando within a commando company.Inscribed with number 49australian commando, special operations, australian special forces